CS4 video jumps and shakes when exporting to any video format

Hi,
I created a project in CS4 and exported the video into a Mpeg2 format and the video skips/jumps/shakes instead of playing continuously. When I test the project inside the project the video plays fine. What could be causing the problem. Please help!!!!!
Bhavani

Some suggestions

Similar Messages

Lightroom 5.4 reaches 10% and crashes when exporting a slideshow video.

Lightroom 5.4 reaches 10% and crashes when exporting a slideshow video every time. I have Abobe Premiere elements 10, which works fine for creating a slideshow. Could there be a conflict? Any suggestions most welcome as this problem is driving me bom-boms.
Regards Dave

Thanks so much ... just tried it and it worked perfectly. I just used a small external drive to transfer them, and ticked the option to 'copy and import photos to new location', so not only the catalogue, but also the photos themselves are on my iMac. Very simple. Thanks.

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Firefox freezes and jumps and closes when i minimise

only in the last few days have i had problems with firefox ,it freezes and jumps and closes when i minimise i have looked through the answers in the forum but dont find anything helpfull ,or its to complicated to understand am very new to this computer game.
i have run my antivirus avast and my system is clear of malwhere or so it says
both google crome and inernet explorer work fine but my preference is firefox
help please its driving me mad
== This happened ==
Every time Firefox opened
== in the last 3 days

Duh!!!!! Stupid me! Of course! Doing it now!

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

My Defined brush duplicates itself over and over when applied to any image!!!??

Hi there, I recently loaded in my signature for my photography and each time I click the signature to apply it to an image it appears fine, however when it is applied to the image it is replicated about 6 times in a pattern effect!
Any suggestions?

Thanks so much! I figured it out!
Date: Wed, 24 Nov 2010 20:16:19 -0700
From: [email protected]
To: [email protected]
Subject: My Defined brush duplicates itself over and over when applied to any image!!!??
Make sure the airbrush is off and check the other settings as indicated below.
http://forums.adobe.com/servlet/JiveServlet/showImage/49162/pse-brush.png
MTSTUNER
>

Exporting: iPhoto won't show all edits and modifications when exporting

Hi there,
A problem recently cropped up in my iPhoto album.
I'm using at 12" PowerBook G4, 1.5GHz, 250GB HD / 1.25GB RAM / OS 10.5.6 / iPhoto 8.0.2 (iPhoto '09). My iPhoto library contains 29,654 photos and 333 movies in 474 events and measures 119.2GB, including content since 1999. It's stored on a LaCie external FireWire drive.
The problem I'm experiencing is as follows:
Certain photos, no matter how I export them, be it via the +File -> Export+ command (to +File Export+ or Facebook (having installed the plug-in) or by dragging-and-dropping from iPhoto to the Finder, will not export with all (or sometimes any) of my edits (a.K.a., enhancements,changes or adjustments) made.
This is to say, for certain photos, I cannot figure out how to get the version of the photo I can see within iPhoto out of iPhoto so it can be shared or used elsewhere.
These +certain photos+ which won't export properly seem to be ones which have had more extensive editing done to them, specifically having had extensive shadows, highlights, definition or de-noise work done.
I have searched the Support Discussions and the web for other case and have found a several. Unfortunately, all of the helpful Support Discussions regarding this issue were archived (and closed) before they reached a solution.
Here is an example of such a case where the various Support Discussions users went to extensive effort to solve the problem but ended without a solution in August of 2008:
http://discussions.apple.com/thread.jspa?threadID=1519734
Thanks in advance for any support.
AE

LarryHN,
Thanks for responding so quickly.
LarryHN wrote:
1 - if you have not try file ==> export and set kind = current
Yes, unfortunately I've tried this. I also tried exporting in every different format, without any luck.
LarryHN wrote:
2 - select the photo in iPhoto and right click (control click) on it and select show file - this will open a finder window - see if the file it brings up has your modifications
This takes me to a file within a sub-folder of the Modified folder. This is an incorrect version of the photo. Choosing +Show Original File+ from the secondary-click menu takes me to another incorrect version of the file within a sub-folder of the Originals folder, as expected.
LarryHN wrote:
3 - go to your iPhoto library and right click (control click) on it and show package contents - look in the modified folder (be very careful not to make any changes of any sort) and look at the photo there with preview and see if the changes show up
Here I ended up at another incorrect version of the photo, which was in a sub-folder of the Modified folder... I think this is the same file I was directed to when I secondary-clicked and selected +Show File+.
Thanks for the help -please let me know if you have any further suggestions.

Images downsized and converted when exporting to PDF

I have Pagemaker 7.0.1 installed on Virtual XP so that I can help out a family member.
Pagemaker's embedded Acrobat 4 was not working properly so I installed my Acrobat 9.0 on Virtual XP. This unfortunately has not solved the problem, which is:
My images are greyscale and 300 ppi when imported into Pagemaker. When exported to PDF using Acrobat 9.0, the images are being converted to CMYK and exported at about 50% of the actual size. Interestingly, those images that are only at 200 ppi are converted but not downsampled.
This is happening no matter how I fiddle with the settings. Happens to both jpegs and tiffs.
I found an old thread on another forum where this problem occurred but a solution was not found or posted.
Any ideas?
Michelle

This reply is a series of comments and suggestions rather than a definitive answer.
1. Your set up is less than perfect, if not unstable, and will be prone to all sorts of bizarre behaviours.
2. Never copy/paste a graphic or table into PageMaker. Always use the Place command. The only "exception" would be that you can copy and paste a properly Placed graphic from within your PageMaker document.
When placing images in a PageMaker file, the following message appears: “The graphic in the linked file would occupy xxxxxxx bytes in the publication. Include the complete copy in the publication anyway?” The correct answer to this question is always "NO".
(You can permanently avoid this popup in future docs by unchecking "store copy in publication" under Element -> Link Options with no publication open. You can do the same to avoid further prompts in pre-existing documents.)
3. Try updating PM to Ver 7.0.1a which had a better Export… AdobePDF…macro. http://www.adobe.com/support/downloads/product.jsp?product=34&platform=Windows
4. In PageMaker’s Print dialogue, click on the Options button, and check "Write PostScript to File." Select the "Normal" radio button. Set both Type 1 and TrueType fonts to download. As always, set the Send TIF/Images option to Normal and NOT Optimized. Make other settings elsewhere in the print dialog as desired, such as "paper" size, crop marks, separations, etc.
5. With your non-standard setup, try the two stage print then distill process. Create a PS file using a postscript printer file, then load Distiller and convert the PS file to PDF. Note: if you have hyperlinks in your PMD file, they will not appear in your PDF and need to be re-created using Acrobat.
6. It's time to leave PM and move on to InDesign - see it as PM Ver 13.
7. Aternatively, use PM7 on a contemporary Win2K PC. http://bigjohnd.org.uk/PageMakerExportPDF/index.htm

Trouble maintaining original "date taken" info and metadata when exporting TIFFs from original CR2 files.

When exporting TIFFs (from original RAW), I noticed my metadata said the "date created" was the day of export. I want to be able to access the date the original image was taken as opposed to the day I exported it. Is there a way to maintain original date of image taken in my info? I couldn't seem to find it after I exported my TIFFs...

I just tested this with LR 5.5 Mac OS 10.9.3 and it works correctly for me.
To troubleshoot your problem:
1. Which version of LR and which platform (Mac, Windows)?
2. Which tool or command are you using to examine Date Created of the exported TIFF?
3. Upload a sample TIFF showing the problem to Dropbox or similar and post the URL here. This will allow us to take a look in detail.

Overlapping rows and data when exporting to Excel

Hi All,
I have developed a crystal report with 20 rows and 30 columns in Crystal Reports designer and when i run the crystal reports designer 10 and down load it to excel, every thing looks good, when i publish the report in Crystal Management console and run it and down load it to the Excel format the some of the rows are overlapping as show below.
Expected Results .
SNACKS           10           20            30          40        50             60
DISPENS           50           60            70          80        90             30
ASPERTE            50           60            70          80        90             30
CARSRD             50           60            70          80        90             30
Result that i am getting
SNACKS           10          20            30          40        50             60
DISPENS       ASPERTE               50           60            70          80        90             30
CARSRD              50           60            70          80        90             30
Regards,
Abraham

Post your question to the Business Objects Forum

Music slightly out of sync when exporting in Premiere CS6, format problem?

Hi guys, i have a quick question.
I edited together a promo for a local band and everything is perfect in the sequence as far as being on point with the music at certain beats and such. However when I export it the music is slightly out of sync, which is bad when you edited everything specificly to the song. I am not using ANY audio from the footage but instead layed a music track over everything. I'm not sure what else to do, could it be a format problem? I am using h.264 (see below), but would AVI or anything else work better? any help is appreciated thank you!
I am exporting directly from inside Premiere CS6 using a custom H.264 preset. 24fps, VBR 2 pass encoding. Target 7MB, Max 11MB. (with render at maxium bit depth, and render at highest quaility selected.)
I put the audio settings to high, 320kbs AAC format.
I use a custom built PC with an i7-3770K, 32 GB RAM, and I exported to a 120GB SSD.
Any other info you need just ask.any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!
Also, any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!

Hi,
I dont think that you will really get a problem while exporting in any of the given formats. But i would really like to check if the audio layer is exactly same as of the video. for eg - if my audio is 00:05:30 and my video is 00:05:20 , we might face issue with the sync.
We can try to put more black video to make it a match with the audio and then try to export.
Where do you have the media files , on a internal drive like c: or desktop? In case not , try to move the media files to desktop and then try to export.
Also instead of exporting the files to your 120GB SSD , try to export it on the desktop.
Hope it helps.
Thanks

Errors when Exporting PDF to various formats

I have a 231 Page PDF that consists of text, scanned images/pages of text, metadata, comments and hidden text. The document is a company manual/handbook. I am working on a project to pull all this into InDesign in order to make the document easily and quickly editable. The problem is that the original PDF was created with Word with all the elements I've listed and the main problem being the scanned pages of text (from previous versions of the manual) just inserted in word before being exported. So, I can't just copy and paste everything into InDesign because a lot of the text is actually scanned pages.
Originally, I got around this by running the OCR Engine and then Command-A > Command-C, etc. The problem there is that the formatting is completely messed up. Line breaks all over, etc. I removed all formatting (including line breaks) by copying and pasting all of the text into Safari's Google search box and then copying/pasting that back into Word (which will eventually simply serve as the file InDesign pulls the text from). Now I'm going through adding in text formatting (paragraph breaks, etc.) by flipping pages of the original manual while hitting "Enter" in Word.
Now, I see a feature in Acrobat 9 Pro that allows me to export to Word, RTF, etc. However, I keep getting some errors. I've managed to get rid of all but one - Bad Fonts. Adobe pops up this "Bad Font" error and tells me the file has not been saved. Additionally, I've managed to get through 116 pages of the document saving process when exporting to "Text - Accessible" and then Acrobat 9 Pro just quits.
Any thoughts on how to get around this error or fix it? Any other time saving tips?
Thanks

Hello,
It seems that the problem is related to particular PDF file.
1. Try running OCR on it via Tools -> Text Recognition -> In This File, and then convert the file.
2. Print the file to Adobe PDF printer and then try to Export it into Excel.
Regards,
Anoop

Black lines not all showing up the same color when exported as any type file

Hi everyone,
I could really use some help as this is driving me crazy! Whenever I upload my Illustrator file with my logo online or export my logo as any type of file, certain black lines are lighter than others. I checked in Illustrator by clicking the lines that were showing up different shades when exported and all have the same #000000.
Does anyone have any ideas what I'm doing wrong?
Thanks!

Unfortunately my file is set up like a hot mess. Everything is in the same layer and I should have definitely done multiple ones. This is only the second logo I've designed and I'm learning as I go. Basically I did an image trace of the drawing and then went back and manually fixed lines. Instead of having only a few to select I have many all in the same layer as my color.
I noticed my vector logo works fine when exported. It's the files where I am resizing it that are coming up in the different colors.

CS4 Adobe Media Encore crashes when exporting HD footage

Hey guys,
Here's my PC's specs:
Windows Vista Home Premium
Service Pack 1
Processor: AMD Phenom 9550 Quad-Core Processor 2.20GHz
Memory (Ram): 4.00GB
System Type: 32-bit operating system
I've got adobe premiere pro CS4 and everything has been going well when working on Mini DV imported footage - exporting AVI's etc, it's all good. But now I've started shooting on a Sony EX3 so I've been importing that footage as MP4s. While not amazing, the editing has been going well, it just goes horribly wrong when I try to export any footage.
For example, I've got a 3 minute video which I've tried to export as an mp4, AVI, mov or H.264 - Adobe Encore will open up quickly enough and then I'll press "Start" and nothing will happen, it will sit and eventually crash.
Any thoughts or suggestions?
Thanks.

Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
What brand/model graphics card (ATI, nVidia, etc) and driver version
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Error -61 and -43 When Exporting using Quicktime

I have recently began receiving errors when I try to export using QuickTime. When I try to export to my external hard drive I get an error -61. When I try to export to Documents I get an error -43
These errors began after I had imported a bunch of home videos yesterday which were pretty massive and filled up my hard drive. I then began to delete some of my videos from my Event Library and Projects that I no longer needed.
It was after I did this that I began to experience these errors.
Any tips, suggestions, or advice would be greatly appreciated.

How are you deleting your movies to free up disk space? Are you doing them in iMovie by rejecting them? If so, that's only 1/2 of what you need to do. In the event where you deleted movies, from the pop-up menu at the bottom of the events, choose "Show rejected only" . Then click the button that says "Move rejected to trash" in the top right. You then have to empty your system trash to free up the space.
Lemme know if that works.

CS4 video jumps and shakes when exporting to any video format

Similar Messages

Maybe you are looking for