CS5 64 bit will not open

I purchased a Sony Vaio with Win 7 64 bit to use CS5 64 bit.
The program installs perfectly but when opening it gets to the final initalization and I get the "Adobe photoshop CS5 has stopped working" error.
I've diabled all security and User account controls then reinstalled, I've even gone as far as a factory reset then redownloaded and reinstalled with no cure.
The 32 bit version and Bridge work fine and the 64 bit version even opens in Safe Mode but still will not open in Admin or regular user accounts.
Anyone have a clue?  Sony is not very helpful.
Thanks

I completely removed the Wacom driver and CS5 64 bit opened just like it should!
Unfortunately those were the newest drivers for the Wacom Bamboo.  I'll try it again.  I can always remove them again.
Thanks so much, I've been stressed out about this for days.

Similar Messages

  • CS5.5 will not open...

    So I just re-installed CS5.5 on my computers, (clean install, I used Adobe Creative Suite Cleaner Tool to remove any previous versions) and every other Adobe application opens except for Adobe Flash Professional, Adobe Flash Builder and Adobe Flash Catalyst.
    I went into AppData and checked for fontinfo.txt, but because Flash never ran; it isn't there.
    I also tried waiting for Flash to open, but whenever I wait, it closes itself.
    ** EDIT **
    I am running Windows 7 Home Premium 64-bit Service Pack 1
    Intel Pentium CPU B950 @ 2.10GHz
    6 GB of RAM
    Anyone else having a problem with this?
    Thanks in advance
    Zach
    Message was edited by: ZDreier

    I'm sorry, this is not an answer but another person with the same issue.
    My Flash CS3 works fine, I have installed the trial Flash CC and it runs fine, but my Flash CS5.5 will not open either.  I have tried similar things you have, all of my other CS5.5 programs open and after a lengthy Norton check it has not found a virus.
    If anyone has found a resolution it would be greatly appreciated.
    My Windows[7] 64bit log:
    The program Flash.exe version 11.5.1.349 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: b5c
    Start Time: 01cf089440a8bb00
    Termination Time: 6
    Application Path: C:\Program Files (x86)\Adobe\Adobe Flash CS5.5\Flash.exe
    Report Id: 92b84a85-7487-11e3-b37f-cc52af88a276
    The Binary Details would be funny - if I wasn't hoping to rely on this for a class I'm taking!
    In Bytes
    0000: 55 00 6E 00 6B 00 6E 00 U.n.k.n.
    0008: 6F 00 77 00 6E 00 00 00   o.w.n...
    0010: 00 00 ..

  • Photoshop CS5 64 bit will not open in windows 8

    PS CS5 will not open in windows 8 (neither will lightroom install)

    I am also having the same issue. I have Adobe Photoshop CS5.1.  The program worked fine in Windows 7 64bit. I recently upgraded laptops to a Samsung with Windows 8 - 64bit.  After full install program will not run/open.  Here is what I have tried to no avail:
    Right Click Photoshop.exe file > Properties > Compatibility Tab >
    Run Compatibility Troubleshooter > Troubleshoot Program >
    Checked box that reads: The program worked on earlier versions of Windows but will not install or run >
    NEXT > Selected Windows 7 for last version program ran on > NEXT >
    Test the Program button > NEXT > No this did not help, report the issue to Microsoft >
    Check for more solutions >  Issues Found with Yellow Exclamation Point - "Incompatible Program Detected" >
    CLOSE
    No other options have worked either. Ive tried compatibility for Windows XP SP2 and SP3 and neither of those worked either.
    I really do not want to pay to upgrade already - how can this be fixed??

  • CS5 Bridge will not open, Air will not install, and AAM Updater will not update.  Please help!

    I am having several problems with CS5, and as best I can tell they all seem to be related.  I purchased CS5 about a month ago.  Photoshop has opened and ran fine.  However, recently AAM notified me some several updates available.  When I tried to update them they all failed.  This lead to the discovery that Bridge will not open at all, Air installs but with an error and cannot update itself or applications like Adobe Help, and since the AAM updater ran it now thinks everything is up to date.
    I have search endlessly for every piece of information I could find on this issue.  As well as, sat on the phone with tech support for hours.  As best I can tell, (and really I have no evidence to support me), it seems to all be related to a permissions issues.  However, I have tried everything the forums suggested with no luck, and Tech Support ended with me doing an Uninstall and reinstall (twice), while repairing permissions in-between.  I am about at the end of the road with this issue and would greatly appreciate any additional suggests you could offer.
    Some additional details.
    Running a MBP i7, 8GB RAM, and MAC OSX 10.6.4
    Bridge Issue,
         When attempting to launch Bridge it simply returns an error "This operation could not be completed..."  I tried the option click and reset method, no luck.
    Air Issue,
         Kind of works, but at the same time doesn't.  In that in one of the previous installations programs like Adobe Help would not run.  Now Help does run, however, when I go to update Air it says it completed successfully but then immediately gives me an error saying "~this may not be allowed by the administrator..."  I also cannot update Adobe Help, it just sits and says preparing to update.
    AAM Updater Issue,
         This appeared to work fine until I attempted to install an update.  It downloaded everything and then failed on the install.  However, now it thinks everything is up to date, but nothing is.

    Well despite not getting much love on this forum.  I was able to correct the problem.  I tried every solution that google would produce on these issues.  Ultimately it came done to permission issue.  I was lead to this fix by a person on flickr that suggested permissions as the cause.  However, his solution was to modify the permissions in the home directory root and apply them to every subsequent folder in the home directory.  Although quick and easy, I felt this would lead to more trouble then it was worth. 
    I did some more digging and what I discovered is that all the permission of the Adobe folders in the home directory library (not the HD library) and the application folder did not match all the other folders in those areas.  Some of the files in some of the folders did not match either.  So I made them match (the ones that matched I left alone), and everything seemingly went back to working normally.  It was a bit of a pain going folder by folder.  Fortunately there where not many of them.  About 8 in total, plus the internal folders.

  • CS5 Illustrator will not open, or quits immediately

    Hello! I have had CS5 since 2010. I have had no problems with my software until a few months ago, particularly with Illustrator. My Illustrator will not open, and if it does, it automatically quits after about a minute. An error box pops up listing problem details and system configuration. Any idea of what could be happening and how to fix it? Your help is really appreciated!

    Nobody can tell you anything without proper system info or other technical details like crash logs.
    Mylenium

  • Photoshop CS5.5 will not open.

    After installing Photoshop CS5.5, it will not open.  Results in an error,"Some of the application components are missing from the Application directory, Please reinstall."  I have removed the app entirely and reinstalled but still get the same error message. 

    Uninstall.
    Run the Adobe Cleaner Tool
    http://www.adobe.com/support/contact/cscleanertool.html
    Reinstall.

  • Installed latest firefox version on windows 7 32 bit. will not open. microsoft trouble shooter message incompatible application

    firefox will not open on windows 7 32 bit after installation. Microsft troubleshooting message incompatible application
    ''locking as a duplicate of https://support.mozilla.org/en-US/questions/1009843''

    Please try a clean Flash plugin install: [http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html] this error was seen last in version 11.8. Please also make sure that your video drivers are up to date: [https://forums.adobe.com/thread/945765] and [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

  • Premiere Pro cs5.5 will not open after double-clicking icon

    I have uninstalled and reinstalled from disk.  I double-click the icon and the opening screen begins and then closes down.  I've run windows update to make sure everything is up to date and it still will not open.  Any suggestions on what to do?

    I don't think that is a graphics adapter, that is an I/O device... from what I have read
    --Windows 7 click START and look on the right side
    --Go to Windows Control Panel from START popup
    --NOTE that I do not have Win8 so can't give instructions
    --Click Hardware and Sound and then click Device Manager
    --Click the + sign at Display Adapters
    --Right click the display adapter and select Properties
    The "usual" is some model of ATI/AMD or an nVidia adapter
    I have nVidia GTX285 with driver 296.10

  • Illustrator CS5.1 will not open on OS X Lion 10.7.5 - "Could not complete the requested operation."

    Out of the blue, I can't get my Illustrator CS5.1 application to open. Instead the app icon bounces on the dock and the message "Could not complete the requested operation." appears.
    I have tried restarting the application, restarting the computer, I have tried holding Command+Option+Shift while opening, I have tried various methods of editing the "Adobe Illustrator CS5.1 Settings" folder, I have tried moving other application folders and font folders, all without success.
    The application is installed on a computer in my office and was installed as a downloadable upgrade to CS4. I was thinking a solution might be to install Illustrator, but I haven't been able to find a link to the CS5 program downloads.
    Today I tried to get help from Adobe Customer Support, who informed me that they no longer support CS5 and directed me to the forums instead. Any solutions???

    Hi,
    It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
    As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
    iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
    Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
    Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012  (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
    8:51 PM      Sunday; May 5, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • CS4 32 bit will not open under Win 7 64 bit.

    Upgraded from Win 32 bit XP to Win 7 64 bit. While in the process of rebuilding my system downloaded and installed Beta versions of CS6 and Bridge for CS6, before trying to install my current CS4 version. I do not know whether this is causing any of the following problems that I am experiencing.        A short time later I installed CS4, ending up with both the 32 and 64 bit versions of CS4. Interestingly, this install did not install a CS4 version of Bridge in either 32 bit or 64 bit, possibly because the Beta CS6 version of Bridge was installed?      
    However, from a previous system backup I was able to retrieve a copy of the CS4 version (presumably 32 bit version) of Bridge, which I simply copied to the new system and found that it works fine. Interestingly now the CS6 version of Bridge loads one of the two CS4 versions and not the Beta CS6, but I cannot tell which one of the CS4 versions. Question: how does one determine whether the loaded version is the 32 or 64 bit version? If I click on System Info it does say X64 which I assume means the 64 bit version is loaded. Is this the way to tell?        
    The CS4 version of Bridge now apparently defaults to the 64 bit version of CS4 on opens.     
    I have now read that most if not all my previous plugins will not run under CS4 64 bit, so I really need to be able to run CS4 32 bit. Unfortunately, when I try to open CS4-32, it fails with the following msgs: "Adobe Photoshop CS4 Has Stopped Working." Then,     
    "Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Photoshop.exe
    Application Version: 11.0.0.0
    Application Timestamp: 48d3882e
    Fault Module Name: MSVCR80.dll
    Fault Module Version: 8.0.50727.6195
    Fault Module Timestamp: 4dcddbf3
    Exception Code: c0000005
    Exception Offset: 0002880f
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt"        
    The CS4-64 version continues to run as it should.
    Assuming that CS6 will come with a 32 bit version when it hits the market I will be upgrading, but for now I really need a working 32 bit version of CS4.
    Please help.
     

    Help - System Info will tell you whether you're running the 64 bit or 32 bit version (look at the end of the first line).  EDIT:  Note that originally said Help - About and have corrected this.
    Yes, Photoshop CS6 provides both a 32 and 64 bit version.  In fact, it should have installed both on your system.
    Normally the two versions don't get into eachothers' hair, EXCEPT for file associations, which may explain the mixup you're having where Bridge runs the last version installed.  I doubt it has to do with your crash though.
    Have you copied any plug-ins or set an Extra plug-ins folder so that there could be a mixup between the two versions?
    Have you checked to see if your display driver has been updated?  Go to the web site of the maker of your video card and download the version that matches your hardware and OS.  Display driver updates solve many problems.
    -Noel

  • CS5 file will not open directly

    My CS5 .INDD (7.0.4) file no longer opens directly from the Finder or within INDD. When opening, the beachball begins spining and "Force Quit" indicates INDD "Is not responsive". After force quiting and re-opening INDD, the file opens as an unsaved file. I've tried coping and pasting the one-page document, into a new file, but the same thing happens.
    This all began when I attempted to create a "Package" of the document, using "File>Package". The package process would never complete and I was forced to force quit the program. The Package folder appeared to have all the files/fonts, but the resulting INDD file would not open, nor would the original INDD file. Although both will open as "recovered" files when INDD is re-booted.
    How can I repair my file?
    Thanks,
    Ray

    Ther first thing I would do is move EVERYTHING out of the InDesign Recovery folder to a safe location (don't delete it, yet) so that ID is not trying to recover anything on startup. Taht should allow the program to either open cleanly, or confirm that the crash did serious damage to the program and let you know that you need to reinstall.
    Once ID is open, try using File > Open... to open the files from the original locations. They may be damaged, also, and non-recoverable except from backups or the recovery data that you are preserving, if that isn't also corrupt.

  • Itunes (64-bit) will not open iphone

    When I plug in my  iphone, iTunes pops up a message that says it will not read my device, because I need to download the 64-bit version of iTunes....I've downloaded the 64-bit version 5 times already....aaaargh.
    If anyone knows the resolution to my problem, I would appreciate the help.
    Thank you,
    Gus

    Try restarting the AMDS >  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service () on Windows

  • After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window

    Hi all,
    I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
    The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
    I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
    The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
    However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
    The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
    My system is as follows:
    Thanks massively in advance for any help that is provided!

    This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
    Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
    I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE.

  • Photoshop CS5 trial will not open - "illegal seek" message

    I have Mac OS X 10.7.3 installed. The Adobe Download Assistant is stuck in extracting mode, which I can't seem to get rid of even after deleting the Adobe Download Assistant dmg and reinstalling it. Since I was not able to open the Photoshop CS5 dmg (I received the illegal seek message), I deleted it. I have tried redownloading the Adobe Download Assistant, but I can't seem to get it out of its extracting state. What do I do? I have tried 2 different internet connections also... since I saw that was recommended on someone else's post that had the same issue.
    Thanks

    Can you try these steps and let us know if it helped. I got this information from the thread (http://forums.adobe.com/message/3980334)
    he following steps will help locate your software for download:
    Go to Adobe.com.
    Click Sign In (in the upper right corner).
    Enter your Adobe ID and password, and then click Sign In. 
    Click My Orders and then Order History.
    Locate the order number, and click the Download link in the Downloads column.
    Start the download by choosing one of the following:
    Click Download and follow the onscreen instructions.
    Click Akamai Download Manager and follow the onscreen instructions.
    If you prefer downloading directly in a browser, click Alternate Download Method. Then click the .7z and .exe files (Windows) or the .dmg file (Mac OS) to download the software to your computer.

  • Photoshop CS5 suite will not open files or any pictures

    We are seeing a problem with our CS5 suite with Photoshop only. The actual Photoshop program will open and allow us to browse the menus, but we cannot open and recent files, or open any new pictures with it. Also we are not able to create a new file with Photoshop.
    We have reinstalled the CS5 suite twice now with now changes. We have also verified that the CS5 suite is up to date with all the latest updates and patches needed. All other parts of the CS5 suite work on the computer.
    Please let us know what other information you may need to help resolve this problem we are faced with.
    Thank you very much!

    I cannot open or create any files. | Mylenium's Error Code Database
    Mylenium

Maybe you are looking for