CS5 launch problem - moved to Australia from GB

CS5 launch problem -
moved to Australia from Uk/GB, bought a new lap top in Australia and Photoshop will not open even though it's downloaded and Bridge etc works on new machine - Problem error message...
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: LocalizeFile:Localized string not found for locale 'en_GB' try fetching for en_US
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 71 Unable to create directory "/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app" with mode 775
ERROR: 71 Command ARKCreateDirectoryCommand failed.
ERROR: 71 Unable to get permissions of "/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app"
ERROR: 71 Error rolling back command ARKCreateDirectoryCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Photoshop CS5: Install failed
ERROR: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
...Is there a fix?

Help ma boab did you migrate over your applications and settings from your old computer? It does appear the installer was unable to create the Adobe Photoshop CS5 folder since your current User account did not have sufficient access to either modify they Applications or Adobe Photoshop CS5 folder if it already exists.
If you migrated/copied any files or applications from your old computer then I would recommend running the uninstaller from the Applications/Utilities/Adobe Installers folder. Once you have uninstalled please run the CC Cleaner Tool prior to reinstalling Photoshop CS5. Please see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html for information on how to use the CC Cleaner Tool.

Similar Messages

Problems Moving Ripped DVD from Itunes to Ipod

Problems Moving Ripped DVD from Itunes to Ipod
I am having a problem transfering ripped DVD's from the Itunes Video folder to the actual Ipod. I thought one of the cool points of the Video Ipod was that you could play DVD's on it. I know I needed to use special software to achieve this since I researched it here. I am using Handbrake Lite since regular Handbrake look too daunting for me. I also used Isquint, since it was recommened here. I used both without changing anything on both of those progams other than click the go button. The DVD's will play in Itunes but it won't allow me to drag them to the Ipod. They are in the Video folder in Itunes. What in the wild, wild world of sports am I do'in wrong? I assume it's something stupid because the device is stellar. Hope someone out there can lend us a hand.
Kind Regards,
Julias

I am having a similar problem, and i cant contact ipod 2 ask 4 help - its not explainedo online:
my ipod will only upload video podcasts, no ordinary videos, except for one. they are all the same format (.MOV quicktime), and my i tunes has them all on it and plays them fine there, its just when i drag and drop or insert my videos onto my ipod any other way theydont get uploaded onto my ipod like everything else does, there seems no way that i can get my own videos onto it. only one video that isnt a podcast has ever uploaded, and its the same format as the others!
Any ideas or help would be apprichiated ( i cant spell:P)

Moving to Australia from Canada

I am moving to Australia in February from Canada. I know I will need an adapter so I can plug it in but what about the transformer?? Some have told me I dont need and others say i do need it for my MacBook Pro.

all you'll need is a different power cable. the transformer is the brick part. get a new one, and you should be golden. i bought my first mac in switzerland and brought it back here. new cable, and i was good to go.

Problem moving/deleting files from time machine backup

I recently ran into some problems with my hardrive and had to get it replaced at the mac store.
Unfortunatly, i only ran a partial time machine backup on the hardrive before i lost it.
Fotrunatly though, it did manage to save some important stuff, but now for the next problem....
I have dragged my files from my external hardrive with the partial time machine backup onto my new desktop but it wont let me do stuff with them
this includes;
asking for my password whenever i want to delete one of them
saying "cannnot be modified" whenever i try to drag the files to a new location.
as you can imagine, this is a bit of a pain.
anyone have anything similair?
help would be great
thanks
Chris

That is not how you restore from a Time Machine backup.
Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Launch problem opening PSE 13 from a read only desktop applied by group policy

PSE 13 won't launch. What is different between opening PSE 13 and other programs? On a normal login it opens. Are there special requirements?

Hi,
Thanks for posting your issue in the forum.
Based on your description, I suspect that maybe Software Restriction Policy has been configured in the domain. At this time, I suggest we could try to collect the following information to narrow
down the cause of the issue.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
user in the wizard)
c. Right click
the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
Once we get the report, please check if the Software Restriction Policy has been configured and applied to the problematic computers and users. If so, please disable the policy setting to see
if the issue persists.
In addition, please try to refer to the following articles for detailed information about Software Restriction Policy and how to troubleshoot Group Policy problems.
Software Restriction Policies
http://technet.microsoft.com/en-us/library/hh831534.aspx
Troubleshooting Group Policy Problems
http://technet.microsoft.com/en-us/library/cc787386(v=ws.10).aspx
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

Problems moving epub book from library to nook; I have Microsoft version 7; I've never had problem before. I have Adobe version 2 and version 4 installed.

Each time I've tried to move epub book to nook, I get an error from Adobe that it can't be copied? I don't know what to do. I had Nook help on the phone but after 1/2 hour of trying the tech told me to get in touch with Adobe. Please help. Thanks
Joan

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

I have moved to Australia from the UK, but cannot buy from the Australian iTunes with my account. Please help.

I have a PC (bought in the UK) and an iPad (bought in Australia), but only buy songs from my PC.
It keeps directing me back to the UK store whenever I try to buy something - it is getting so frustrating! Any ideas or ways to fix this much appreciated.
Surely I don't need to create a whole new account?
Thanks. :-)

Change your account and billing info to your new Australian info

Problem moving a Node from one Document to another (XMLBeans)

Hi all
Is it possible to get a org.w3c.dom.Node from one org.w3c.dom.Document object and put it into another org.w3c.dom.Document object?
I am attempting to do this by getting a Node from an XMLBeans object and trying to append it to a SOAPHeader. It compiles, but I get the following runtime exception: -
DOMException: WRONG_DOCUMENT_ERR
The Javadoc says that this is thrown If a node is used in a different document than the one that created it (that doesn't support it)
I dont know if the problem is that Nodes cant be passed between Documents in general (namespace issues?), or there is something about a Node from an XMLBeans object that is putting a spanner in the works somewhere.
I would be very grateful for any advice or suggestion.
Many thanks
Jon

If you look at all the methods of the Document interface carefully, pretty soon you will come upon one named "importNode".

Problem moving rented movie from laptop to iPad

When I go to move a rented movie from my macbook pro to iPad nothing happens and there is no dialogue box. Purchased movies sync fine. This is a new macbook pro so perhaps the new OS is having a compatibility issue with the iPad? Any ideas?

Did you click "Apply" on bottom right? See second picture.
http://i1224.photobucket.com/albums/ee374/Diavonex/28da64ce688ba1b5355325d1c3fe9 a68.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/36f496320adbc639e85442bd20b6d 94a.jpg

Problem Moving XCode Project From iMac to MacBook

I have been working with an Objective C library for iPhone apps using XCode on a iMac running OS X Lion 10.7.5 (11G63). My project builds fine on this system. I need to relocate the project to a MacBook Pro running OS X 10.8.4 (12E55). I have XCode 4.6.3 installed on both systems. The project fails to build on the Mac Book pro. I get two compile errors, both claiming "No visible @interface for 'xxx' declares the selector 'yyy'". (xxx and yyy are class and method names respectively.) The source code appears correct, and as I mentioned this very same project builds fine on the iMac.
I can zip the project directory structure on the MacBook and copy it back to the iMac, and it again compiles just fine.
The project will also build on another iMac using XCode 4.6.1
I've tried stuff like deleting the schemes and re-creating them, etc.
I'm rather new to the Apple development world. The code was developed by someone else, and unfortunately I can't really call him in on this. So if anyone has run into anything like this, I'd appreciate knowing what the causes/remedies might be. Thanks..

3kelvin wrote:
The code was developed by someone else, and unfortunately I can't really call him in on this. So if anyone has run into anything like this, I'd appreciate knowing what the causes/remedies might be. Thanks..
Sorry. There is no remedy other than doing it correctly the first time. What you will have to do is rebuild the project from scratch.
Do all of the following on the original machine. Create a new project using the correct template for whatever you are building. Use git SCM. Setup all of the plist and bundle IDs to be the same as the original. Then, open up the original project. Drag all of the source files except for main.m from the old project to the project navigator of the new one. When promped, make sure you copy the files to the destination. Once you have all of the files copied over, get the project running again. I'm sure you will have difficulty because there are probably other things that were done incorrectly.
Once you have the new app working, you can transfer it to the new machine. You might want to look at setting up a remote repository. You will also want to do additional testing. Once you familiarize yourself with the code, you might want to split it back up again into an organization that makes sense for you.

Problem moving hidden files from Iphoto to Aperture

About a year ago I installed Aperture and moved all my iphoto files to Aperture. I have just now discovered that the files I had hidden are missing. I just updated to Maverics & updated my Aperture program, but don't know if I update iphoto if I will be able to access the files I had hidden. I don't see a way to unhide files in Aperture. I can search for a file on my mac and it will bring it up that it exists in iphoto, so I know they are still in my library on iphoto. I have an external hard drive that I keep my photos on. I'm not very computer savvy, so I need an easy solution if possible. Thanks for your help!

See this document: Using the Unified Photo Library http://support.apple.com/kb/HT5043
Photos hidden using the Hide Photo command in iPhoto cannot be accessed in Aperture. If you open the library in iPhoto, unhide the photos, and then open the library again in Aperture, the previously hidden photos are accessible.
Photos rated as rejected in Aperture are not accessible in iPhoto. If the photo's rating is subsequently raised in Aperture, it will then be accessible in iPhoto.
So to unhide your photos, update iPhoto to a compatibe version. If your current Aperture version is Aperture 3.5.1, update iPhoto to 9.5.1, then you will be able to unhide the photos.
-- Léonie

Premiere Pro CS5 Launch Problem

When I try and launch the program, it gets caught up when loading the ImporterAIEPS.bundle (see screenshot) and then crashes.
Any recommendations to fix this?

Hi Paul,
Turn off your Firewall and see if it loads okay.
If it does load, then you need to allow your Firewall to all access for:
dynamiclinkmanager.exe
adobe qt32 server.exe
adobe premiere pro.exe
afferfx.exe
and any other Adobe programs that want access.
I am running McAfee Internet Security with the Firewall in the Stealth Mode.
I just wait for McAfee to tell me one of Adobe programs are trying to access the internet and I set if for full access.
With McAfee, you may have to wait up to 5 minutes for it to prompt you while Premeire or After Effects trys to load.
Dave - Studio 1 Productions

Illustrator cs5 launching problem...

When I try to open the illustrator app on my macbook pro 2010, this message pops up and the app doesn't lauch: You cannot open Adobe Illustrator application because it is perhaps harmed or incomplete. Any idea of how I can fix that?

Try a re-install.
Thanks,
Anirudh

Hi i am using OS 10.8.5 i hv a problem moving items to trash when i delete any thing it deletes from specific folder but dosnt appear in trash n my hard drive space is not getting free kindly help me

hi i am using OS 10.8.5 i have a problem moving items to trash when i move a specific thing to trash it deletes from that folder but does not appear in trash and my hard drive space is not getting free i am a new user to mac kindly help me out

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

CS5 launch problem - moved to Australia from GB

Similar Messages

Maybe you are looking for