CS6 Bridge can't read .cr2 and .raf files anymore

Been having some serious issues with Bridge CS6. Seemingly overnight I can't open .cr2 files from a Canon 5D Mark III or .raf from a Fuji x100 anymore. I've tried updating, uninstalling and reinstalling, purging the cache, manually deleting the cache, running the cleaner tool, resting the preferences, but no luck. These are files I could read just a few days ago. Nothing else has changed.
I'm on a Mac, 10.6.8.

I have the same problem with RAW from my Canon M CR2 files. I am on PC. I can open them in the Canon software, but I'd rather open them in Bridges as there is mare that can be done with them and I have been using it for many years

Similar Messages

Why can't PS CC read .gif and .png files anymore?

Everytime I've tried to load my files into my PS like usual (simply dragging the photo to the dock) I get this error message "Could not complete your request because Photoshop does not recognize this type of file." for both .gif files and .png. It's quite frustrating because a lot of my files on my computer are in .png format and I have previous .gifs I've made that I'd like to edit and can't. I have a Mac OSX and I've tried rewriting the file names but I still get the same message and I've tried making a new document in PS and pasting the photo but I only end up with the image below. I'm not sure what else to do anymore. It's quite frustrating. Any suggestions?

All right. That could also explain why my updates aren't working. (I'll try the same for my illustrator because those updates aren't working also.)

I can't read .hdr and .exr

I can't read hdr and exr files with Photoshop CS6 on OS 10.8.5.
the slider did not appear
How I can do it? With wich software or plugin?
Thanks
Dudu Tresca

hi CHris
OK CS6 support those file formats
but opening a photo in CS5 with OS 10.6 appeared a slider on the bottom left of the photo.
When you moved it, the photo brightens or darkens
Now it open withou this slider.
It was useful to apply reflections in cars
Have you an idea how I can do to see this slider again?
Thanks and best regards

Bought a new camera and Photoshop advises me that it can not read my type of file.. Its canon 7d mark 2 and the extension is CR2.

Bought a new camera and Photoshop advises me that it can not read my type of file.. Its canon 7d mark 2 and the extension is CR2.

Hi EddieGerdak,
The update is available now.
Release details:
Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html
Regards,
Pete

Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

Specs:
iMac 10.8.5
3,4 GHz Intel Core i7
32 GB 1600 MHz DDR3
Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
I tried restart my iMac and when I was logged back in, my dock preferences were reset.
Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
When I tried opening it, it said the file was damaged and could not be openend.
I tried opening it with AE or importing the file in a new project but nothing helped.
When I tried looking for autosaves, this is the really weird part, there were none.
Even though there are autosaves from my other projects, this one was completely gone.
It looked like the day before never happened on my computer.
Also when I openend Premiere all the recent projects had been wiped.
So at first I thought it was a Premiere Pro failure.
But than, later on the day, I tried loading some RAW files from my compact flash card.
This is where I would get an error (error -36) which said some data cannot be read or written.
I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
But when I tried moving the files to an other folder the same error occurred.
While dealing with this issue I wanted to put on some soothing music on youtube.
This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
Just like my system preferences, all the preferences I had with Chrome where also reset.
Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
Some background info which could be helpful for solving this mystery:
two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
I got it replaced by a qualified apple repair store.
When I got my computer back, all the files where gone.
I got on the internet without AdBlock installed yet.
A game or whatever it was, can't clearly remember, got installed by accident.
I deleted it immediately.
Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username.
So I brought my mac back to the store.
Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
I asked him; could it be a virus? He replied no way.
I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
Could this be the work of a virus or a malware? Or is it a disk permissions issue?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I have iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling

When in mode dev to develop my website, I can't open buttons and PDF files to check my changes or somebody else's changes. What is wrong ? (I updated Adobe Reader)

when in mode dev to develop my website, I can't open buttons and PDF files to check my changes or somebody else's changes. What is wrong ? (I already updated Adobe Reader)

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

Everything is very small, text, pics, programs dont even fill 1/4 of a page I can not read it and if i click apple plus things overlap each other so now what???

everything is very small, text, pics, programs dont even fill 1/4 of a page I can not read it and if i click apple plus things overlap each other so now what???

Can you think of any recent changes on your computer or in Firefox, new programs, add-ons, etc.?
Have any cats walked across your keyboard recently?
My first guess is the same as yours, which is a "zoom" issue. Holding down the Command key and pressing 0 (zero) should reset the zoom level of the current site to the standard level. Is that still too small?
Regarding content overlapping, this can occur for a few different reasons. Please check on these:
(1) "Text Only" zoom
If View menu > Zoom > Zoom Text Only has a checkmark, click it again to unselect it.
(2) Manually setting font sizes
In the Preferences dialog (either the "3-bar" menu button or the Firefox menu) > Content > "Advanced" button
If the Minimum font size is set to a number larger than 9, change it to 9 or None. A large minimum font size often will wreck the layout.
At the top, there is "Fonts for" drop-down that usually will say Latin or Other Writing Systems. You will want to make the same change for both of those, so select whichever one isn't currently displayed.
Finally, make sure the checkbox for "Allow pages to choose their own fonts" is checked and OK out of the dialog.
Any difference so far?

Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?

My daughter is running Adobe Reader 9.4.5 and Adobe Flash Player 10 Active X
on a Dell Dimension 4400 system with
Windows XP Home Edition version 2002 Service Pack 3.
During a full system backup using Seagate DiskWizard version 11.0.8326
each time folder C:\Windows\Cache\Adobe Reader 6
is accessed the pc freezes with the Blue Screen error
IRQL NOT LESS OR EQUAL ERROR 0x0000000A
(0x00000166, 0x00000002, 0x00000000, 0x804E5443).
Each time the Adobe Reader 6 folder is opened manually, the system presents a spinning
CD icon superimposed on the cursor and attempts to access the CD drive.
The access ultimately fails since there is no CD loaded because there is no intent to install
anything at the moment.
Through a manual process of backing up each of the the files in the Adobe Reader 6 folder
individually, one at a time, I strongly suspect the problem file to be instmsiw.exe.
Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?
Are there any registry entries or issues that must be addressed before deleting these files?
What is the best way to free up space on the C drive that is apparently being occupied by
files left over from the install of a prior version of Adobe Reader?
The folder C:\Windows\Cache\Adobe Reader 6 contains the following files:
0x0409.ini                        5KB          Configuration Settings        2/18/2003
abcpy.ini                          2KB          Configuration Settings        3/24/2003
Adobe Reader 6.0.msi      2198KB     Windows Installer               5/19/2003
Data1.cab                       23334KB    WinZip file                         5/19/2003
instmsia.exe                   1669KB      Application                        3/11/2002
instmsiw.exe                  1780KB      Application                        3/11/2002
Rdr60ENU.itw                 16KB          ITW file                            5/11/2003
Rdr60ENU.mst               4KB            MST file                           4/16/2003
Setup.exe                      212KB        Application                        5/19/2003
Setup.ini                        2KB            Configuration Settings        5/19/2003
Thank you for any assistance you can provide.

Go to Add/Remove Programs in Control Panel and uninstall Adobe Reader 6. That version poses a security risk to your system and should be removed a.s.a.p.
After you remove it, reboot and then delete the "Adobe Reader 6" folder at the location you mentioned above.
Then go to http://get.adobe.com/reader/direct/ and download version 9.4
After that installs, download the latest patch for it by opening the program, then go to Help | Check For Updates.
As a precaution, download the free version of Malwarebytes from here: http://www.malwarebytes.org/products/malwarebytes_free and then run a full system scan.

How to download and install libreoffice to windows 7 with firefox as browser (error message says can't read it and see section administrator)

At libreoffice site I clicked on download and the download appeared in "My Documents" in "Downloads. When I click it to install it, it says it can't read it and to contact section administrator.

Here are two help pages to help you get started with LibreOffice:
http://www.libreoffice.org/get-help/
http://www.libreoffice.org/get-help/installation/

Hello all, I saw this message in my Iphone 5 notes. it reads " Stop! who are you? And why can I read your and you my notices??" Please has anyone had any similar experience? Any suggestions/solution would be greatly appreciated. Thanks

Hello all,
I saw this message in my Iphone 5 notes.
It reads " Stop! who are you? And why can I read your and you my notices?? "
I did not write it.
Please has anyone had any similar experience?
Any suggestions/solution would be greatly appreciated.
Thanks

oliverMili wrote:
Hello all,
I saw this message in my Iphone 5 notes.
It reads " Stop! who are you? And why can I read your and you my notices?? "
I did not write it.
Please has anyone had any similar experience?
Any suggestions/solution would be greatly appreciated.
Thanks
I had a similar experience with mac e-mail where apparently someones ICLOUD id for their Iphone was created with an Alias I had @mac.com for years. Originally thought the mail was phishing and deleted without opening - then received forwarded mail from the other persons non-apple account - so gave feedback through mail to apple and also sent an email to the other persons non-apple account from a non-apple account telling them I was getting their mail because it was my alias.
That person did get apple to untangle the accounts so I did have to reset my password once it was done.
So one option would be to contact apple support to get them to find out what is going on with your account.
E-mail contact of the other person was easy once I had a legit account to send to -- don't know how you would contact the other person in notes.

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Read, Write and create files from java applet.

Dear All,
I have created a two files. One is applet and one application file. I am creating a instance of application file in applet. Application file is used for reading, writing and creating files. When I invoke applet from broser it dipslays error wrt file access permission. From the forum search I know that we need to sign the applet / edit the java policy to run the code locally. Final delivery of my code should execute on different system. Its not web. I have created a html page on submitting the form it invokes applet to read the form values from param and needs to update the values in xml file located locally. Please help me on how I can proceed with this fix.
Thanks in advance.

Sorry if I have not stated the problem clearly. I need to update content to files hosted in local system using java applets.
I belive there are two ways to achive that.One with jar signer and one with modifying the java policy file. But this application needs to be installed in different system locally as I have created a application with webpage as useinterface and need to update the content in local files on submission. Not sure on how to modify the java.policy files in each end user system and whats the value we need to update in java policy file. Please help me on the steps to be followed

How can I read the printer snapshot file printers.xml

How can I read the printer snapshot file printers.xml

XML files are typically viewed using a web browser.
Open the XML file and the default program should open it automatically. If you are prompted to select a program, use the option that lets you choose a program and brows through the directories for your browser (for example, use Internet Explorer, Firefox, etc.).
If need be, you should be able to right-click the file and select open with to choose the program to open it with.
There are other XML viewers out ther, but web browsers are typically the default as XML is a web language.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I can't read a Object from file, Please help me

i want to write a Object into File. this is code of Object
class objStoreCus implements Comparable, Serializable
String customerID = new String();
String customerName = new String();
String customerEmail = new String();
objStoreCus(String cusID, String cusName, String cusEmail)
customerID = cusID;
customerName = cusName;
customerEmail = cusEmail;
objStoreCus(){}
public int compareTo(Object o)
objStoreCus oS = new objStoreCus();
oS = (objStoreCus)o;
return(customerEmail.compareTo(oS.customerEmail));
private void writeObject(ObjectOutputStream s) throws IOException {
s.defaultWriteObject();
private void readObject(ObjectInputStream s) throws IOException, ClassNotFoundException {
try
s.defaultReadObject();
}catch(IOException ie){throw new IOException();}
catch(ClassNotFoundException cnt){throw new ClassNotFoundException();}
And I was wrote above Object into File by this code :+
FileOutputStream fos;
ObjectOutputStream oos;
FileInputStream fis;
ObjectInputStream ois;
public void writeObjToFile(objStoreCus obj)
try
fos = new FileOutputStream("Exrcise3.ex3", true);
}catch(FileNotFoundException fnfe){}
try
oos = new ObjectOutputStream(fos);
//ghi doi tuong vao file
oos.writeObject(obj);
//dong stream
oos.close();
fos.close();
}catch(IOException ie){}
But i can't read above Object from file. allway have a Exception occur "StreamCorruptedException".
this is code read Object form file :
*parameter is ArrayList will be store Object from file.
public void readObjFromFile(ArrayList al)
try
fis = new FileInputStream("Exrcise3.ex3");
}catch(FileNotFoundException fnfe){}
try
ois = new ObjectInputStream(fis);
while(true)
try
objStoreCus osc = new objStoreCus();
osc = (objStoreCus)ois.readObject();
System.out.println(osc.customerEmail);
}catch(Exception e)
e.printStackTrace();
//System.out.println();
break;
ois.close();
fis.close();
}catch(IOException ie){}
}

Problem lies in
os = new FileOutputStream("Exrcise3.ex3", true);
You are trying to append to that file, You should always use new file to serialize objects.
os = new FileOutputStream("Exrcise3.ex3");
Try with above line.

CS6 Bridge can't read .cr2 and .raf files anymore

Similar Messages

Maybe you are looking for