CS6 .mts from AF100 will not stop conforming

I see tons of chatter about this issue over the years but no real resolution to the issue. I'm a recent convert from FCP/Avid. I have some .mts files from an AF100. I followed everyones advice and let the audio finish conforming before I started editing, but not only do the files need to be conformed every time I restart PP, but every time I switch a sequence! This is killing me. I have to open any clip I want to listen to in the source monitor to prioritize it in the conforming cue. I see the .pek and .cfa and .xmp files in the folder with the source media, but obviously things are not communicating. Any work arounds? Seems like this has been and issue since CS3 or 4, wish Adobe would have worked this out by now....I have updated to the most recent version of cs 6, mac os 10.6.8, Dual Quad Core Xeon with 32GB ram....

We see files being re-conformed over and over on both Windows and Mac platforms, although to be fair, not quite as bad as being described. It does apear that if the source files are ever 'touched' by Premiere Pro (as in meta data etc updated) then if performs a reconform as if it was a new file. Of course, an engineer could say that's not the cause and it's becauseof 'xyz' instead. In fact, I wish they would
It would be nice if someone from Adobe could let us know the reasons while any file gets reconformed so we could all stop doing what ever is causing it. Please ? Pretty please?

Similar Messages

Music from game will not stop

Playing Ancient Egypt pyramid solitaire, the musoc is off on the screen, however whjen you turn up the speakers, it never goes off. It is on 24/7. You can't play anything on our speakers, except hearing the music from the game.
Thank you for any help

Can you try rebooting your computer?

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

After syncing my itunes from my computer to my iphone4, the download icon at the top of my iphone will not stop.

After syncing my itunes from my computer to my iphone4, the download icon at the top of my phone will not stop. It appears at all times as though I am in the middle of a download, but it is not connected to anything.

This is from a 4S with iOS 7 running iTunes Match:
You won't see Edit if it's a Genius playlist (like the one in the image above).

HT201412 iPad jumps from the start screen to the white apple screen every 2 to 3 seconds and will not stop. Shutting it off and resetting has no affect.

My iPad jumps from the start screen to the white apple screen every 2 to 3 seconds. Turning it off or resetting it does not work. The restore from iTunes will not work due to the fact that I need to click off Find My Devise before I can restore...I can't get in to click that off.
Any ideas?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Iphoto will not stop asking for my confidential info from Facebook every time I open it.

It allows me to deny, but will not stop asking

Remember this was a test. It tells us that iPhoto is essentially sound and the issue is within your main library.
Let's try repair that:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system. Aircard will not stop self-assigning IP address. Any ideas how to resolve successfully?

Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had. After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8. I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure. Only way to my home network and router is ethernet now. Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

When see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My ipod touch will not stop playing music

My ipod touch will not stop playing music. I will pause the music, leave the playlist, and after 30-60 seconds, the music starts playing again. I use my ipod when I run and when I drive (hook it up to the stereo). It is very annoying when I stop to take a phone call or listen to directions, turn off my music, and then hardly a minute into my stop, the music starts right back up again.

FUEL1996, not correct. Apple does not allow one app to control another app.
laurathecellist
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Itunes 10 will not stop auto syncing

I have itunes 10 on a mac and a 160 gb ipod classic.
it will not stop auto syncing when I plug in my ipod, even though "do not auto Sync" button is checked as well as checking off "do not open itunes automatically.
It syncs FOREVER. I would love to find a way to stop this from happening. I dread plugging in my ipod to put on new music etc.

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Problem with In Design CS6 Unexpected Quit and will not re start up, even after computer restart?

In Design CS6 Quit Unexpectedly and will not start back up, even after restarting computer. Tried to do a CS6 re-install. It finished and said ready to use, but still getting same Unexpected Quit and In Design will not work. Did not "Un-install CS6 first" Should I try installing CS6 again, un-installing version on computer first?

Hi Ivesprepress,
You might also try resetting your user preferences
You can delete the replaceable InDesign SaveData and InDesign Defaults files by holding down the following keys while InDesign is launching:
Windows: Shift+Ctrl+Alt
Mac OS: Shift+Control+Option+Command
Taken from: InDesign preferences and support file locations
- Dave

Whenever I open Firefox a series of sirens start and will not stop. Does not happen in Internert Explorer.

When Firefox is opened a series of sirens starts and will not stop until Firefox is closed.
== This happened ==
Every time Firefox opened
== started when I opened a news story from the Sacramento Bee News Paper on line. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.1)

That is an issue with the "Cool Previews" extension.
See [tiki-view_forum_thread.php?locale=en-US&comments_parentId=678288&forumId=1]

Ever since I upgraded to 4.0, the welcome tab will not stop opening. It's getting rather annoying.

The welcome tab for the new 4.0 will not stop opening every time I open my browser. Each time I open Firefox two tabs open, the welcome page for the new 4.0 and my home page. I updated some time ago and this welcome page is becoming quite annoying. How do I stop it from opening? In the past, it has stopped after the first time I open Firefox following an update.

Thank you for the reply. I have Google set as my homepage, and that's the only homepage listed in the Options box. I tried restoring to default, but when I opened again, the 4.0 page and Google opened again. That leads me to think it might be options, but that article meant absolutely nothing to me.
What I find strange is that when I have one Firefox window open, then open another Firefox window, only the Google page opens, not the "get to know 4.0" page.

Distiller will not stop distilling postscript file

I use Distiller 6.0.2. Lately, when I try to distill a Quark layout into a pdf the distilling process will not stop. The progress bar shows a number that just keeps on climbing up. It seems if I quit the program and then restart it, this will solve the problem and distiller will make a pdf of the postscript. However, I will get the same problem once I try to distill another page. I tried to trashing the Distiller preferences and then restarting the program. This did not do anything.

It's not a specific file and it doesn't matter how big a file is. I am distilling a postscript file. My Mac is running on 10.3.9. I only print from Quark to get postscript files.

Nano will not stop scrolling songs

Nano is continually scrolling through all songs without allowing me to play any of them. It just starting doing this after using it without problems for over a year. It will not stop, but scans through all songs without letting me play them. When I touch the play button it stops for a split second then goes back to scanning all my songs. I have tried everything to fix it.

Okay, the problem is fixed. Try this, It worked for me.
Deauthorize and reauthorize your account in iTunes
In some cases iTunes may "forget" that your music is authorized. You can refresh the authorization by deauthorizing and then reauthorizing your computer. To deauthorize a computer:
1. In iTunes, choose Deauthorize Computer from the Store menu (your computer needs to be connected to the Internet).
2. In the resulting dialog, enter your Apple ID and password.
3. Click OK.
You can now reauthorize your computer by simply trying to play one of the songs you've purchased. A dialog box will appear asking you to enter your Apple ID and password. Once you have done so, click Authorize to finish the process.
Message was edited by: the-chocoholik

Canncelling sync will not stop

In the process of syncing my ipad with my pc. After syncing was done the message says "canncelling sync" and will not stop. What can be done? Thanks.

Hello,
I bought a Centro from Sprint.com in March and I am having the same problems. It will not stop trying to Sync even if my cell phone is not connected to the computer via USB cable. I can not even use the phone to call anyone as the "Connecting with the desktop using Cradle/Cable" will not go away. When it is hooked up the computer it works fine and I can use the phone and the HotSyncs are successful but only if it is hooked up to the computer.
Please help!
Thanks,
Robert
Post relates to: Centro (Sprint)
Message Edited by cmuirm on 05-16-2008 09:12 AM

CS6 .mts from AF100 will not stop conforming

Similar Messages

Maybe you are looking for