CS6 Offset filter not working as expected

I've been using the offset filter for years to create seamless patterns with predictable results - I choose "Wrap around" and when I enter the distance the parts of the image that go off one side show up on the opposite side.
Now, with CS6, sometimes it works as expected and sometimes parts of the image go missing when (if) it shows up on the other side.
I've discovered that when this happens if I go to Image - reveal all that often times those lost pixels are outside of the viewable canvas. However, sometimes reveal all doesn't show anything new and the pixels have just been lost.
I know there are not extra pixels outside the canvas are before I run the filter so I don't understand how this is happening.
Does anyone know what's going on and how to prevent this from happening?
The only solution I have found is to select all and crop the image between every offset. Sometimes I'm offsetting 20-30 layers in a row (becaue you can't apply a filter to multiple layers at once, so annoying). Otherwise, if I'm not careful after I've offset everything I go to check the pattern and realize i lost parts of my image.
Thank you

I'm having the exact same problem with my offset filter. Have you found a solution yet?
Edit: I have figured it out.
The problem is that the layer your are applying the offset filter to has white/transparent pixels that extend beyond the document size. What you have to do is "select all" and crop the image to the size of the document and make sure to "delete cropped pixels" as Noel said.
The filter IS working correctly, however it's wrapping empty pixels, not what we expected.

Similar Messages

  • My Offset filter not working in Cs6: Seamless pattern problems

    Hi all.
    Im trying to create a seamless pattern. using lots of layers.
    Im going to filter/other/offset/, adding the vertical or horizontal dimensions for as 2953px (image size is 2953px x 2953px). and checking the ‘wrap around’ box.
    But it’s not working & is cropping off loads of the layer, so not seamless at all.
    I've tried with another layer and the same thing is happening.
    I've 'revealed all' and shows nothing. I’ve tried to delete any transparent stray pixels around the layer I'm trying to wrap.
    & I have also selected all & then cropped the image but it’s still happening.
    I've googled till my hearts content but found no other idea on how to solve. Any ideas?
    All my layers are from brushes I have created and used so lots of transparent textures. But that would be a problem if I have tried all of the above would it?
    Many thanks in advance.

    Thanks. I have attached screen shot.
    If you see on the top left and bottom left this is the "white flower copy" layer that I am trying to offset. This is a copy of the white flow with blue centre just to the left of the offset window.
    You will see that the offset layer I want to wrap is missing the blue centre.

  • GPP item-level targeting filter not working as expected

    I am trying to set the Internet Explorer homepage via user Group Policy Preferences (GPP) registry setting for a very specific group of users.  I am using item-level targeting to accomplish this but am having trouble getting the logic working as expected.
    Here is my item-level targeting filter:
    The user is a member of the security group CONTOSO\FireRescueDept
    AND this collection is false
         The user is a member of the security group CONTOSO\EmergencyManagementDept
         OR the user is a member of the security group CONTOSO\PublicSafetyDivision
    The user in question is a member of both CONTOSO\FireRescueDept and CONTOSO\EmergencyManagementDept.  I believe this means that this particular registry GPP setting should NOT apply to the user in question and that is the outcome I desire.
    Here is how I'm thinking about it:
    The user is a member of CONTOSO\EmergencyManagementDept; therefore, "The user is a member of the security group CONTOSO\EmergencyManagementDept" evaluates to TRUE.
    Since the other item in the collection is connected with the boolean OR operator, the collection evaluates to TRUE regardless of the evaluation of "The user is a member of the security group CONTOSO\PublicSafetyDivision."
    The item-level targeting filter is looking for the collection to evaluate to FALSE.  Since the collection has evaluated to TRUE, the evaluation "This collection is false" is FALSE.
    Because of the AND operator in front of "This collection is false", both "The user is a member of the security group CONTOSO\FireRescueDept" and "This collection is false" must evaluate to TRUE in order for the item-level targeting
    filter to determine that the user in question to apply the GPP setting the filter is attached to.  However, since "This collection is false" has already evaluated to FALSE, the filter as a whole should evaluate to FALSE and this GPP setting
    should not apply.
    However, according to gpresult it does apply.
    Please advise.  I want this particular setting to apply to users in the CONTOSO\FireRescueDept group unless they are a member of CONTOSO\EmergencyManagementDept and/or CONTOSO\PublicSafetyDivision.

    Am 21.05.2013 16:22, schrieb Scott W. Sander:
    > Does item-level targeting not work with Universal security groups
    > because the group policy client isn't able to determine that the user
    > is a member of groups of that type?
    In my experience, it DOES work with universal groups... Are you
    suffering from token bloat? How many groups is the user a member of?
    http://blogs.technet.com/b/shanecothran/archive/2010/07/16/maxtokensize-and-kerberos-token-bloat.aspx
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating!

  • Print history filter not working as expected

    We have four HP LaserJet 400 M401dn printers which are used soley for ePrinting, within my organisation. This afternoon we noticed that emails generated by the cloud-hosted web application to which we subscribe, and sent to one of the four printers, were not printed. There are no signs of the emails within the print history i.e. HP Connected > Collections>| PRINTING.
    In attempting to troubleshoot this, I manually sent an email to the printer, which printed out normally. However I noticed that the manual printout's print history entry is only visible in print history when the unfiltered 'All Printers' top-right dropdown is set. If I click the dropdown and set it to the printer email address to which I sent the message (and subsequently printed it), the print history is completely empty - no entries at all.
    I suspect the original problem with printing from the web app is a transient one as I noticed the HP Connected message "We are currently offline for maintenance. Sorry for the inconvenience. Please check back soon." this morning, but I thought I'd point out the print history problem since I guess it may be a bug?
    I'd be interested to know if other users have encountered this. The print history filter is extremely useful, but obviously it needs to work properly. 

    Untitled_Doc,
    I am glad to help. Some printers are classified as business printers and others are classified as home use printers. I shared the link above to get to it, if you have any further issues and want to post again at a later date.
    Thank you for using the HP forums.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Subtraction of two key figures normalized to result not working as expected

    Hello SAP Community!
    I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
    In order to explain the problem I am facing please analyze below text:
    1) Let's assume I have below data:
    LOAD MONTH  PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
    200805         PLANT-A  MAT-1            200805         510,235.00
    200805         PLANT-B  MAT-1           200805          74,240.00
    200805         PLANT-A  MAT-1           200806         438,721.00
    200805         PLANT-B  MAT-1           200806          74,240.00
    200805         PLANT-A  MAT-1           200807         356,981.00
    200805         PLANT-B  MAT-1           200807          74,240.00
    200806         PLANT-A  MAT-1           200805               0.00
    200806         PLANT-B  MAT-1           200805               0.00
    200806         PLANT-A  MAT-1           200806         510,235.00
    200806         PLANT-B  MAT-1           200806          74,240.00
    200806         PLANT-A  MAT-1           200807         438,721.00
    200806         PLANT-B  MAT-1           200807          74,240.00
    2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Comparison Units (June 2008) 510,235.00  438,721.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Comparison Units (June 2008)  74,240.00   74,240.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
    we normalize forecats to results an we get the below report:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
    units, for both number of units and %. The report now look as below:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  1.77%       2.74%
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %  -1.77%      -2.74%
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    5) PROBLEM:
    In my report, the "Delta base vs. comp. units %" is not working as expected and
    calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
    So my report looks as follows:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  71,514.00  81,740.00 <<<WRONG!!
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %       0.00        0.00
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    The formulas are:
    a) Delta base vs. comp. units %
      Delta base vs. comp. units % = Comparison Units % - Base Units %
    b) Delta base vs. comp. units
      Delta base vs. comp. units = Comparison Units - Base Units
    The KFs
    - Comparison Units %
    - Base Units %
    Are RESTRICTED key figures (restricted to Base and comparison month variables) which
    are setup as:
    1) Calculate Result As:  Summation of Rounded Values
    2) Calculate Single Value as: Normalization of result
    3) Calculate Along the Rows
    The KFs
    - Delta base vs. comp. units %
    - Delta base vs. comp. units
    are FORMULAS setup to:
    1) Calculate Result As:  Nothing defined
    2) Calculate Single Value as: Nothing defined
    3) Calculate Along the Rows: user default direction (grayed out)
    Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
    Any help is highly appreciated.
    Thank you.
    Mario

    Hi,
    The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
    I hope this will solve your issue.
    Regards,
    S P.

  • Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

    My problem is pretty easy to reproduce.
    I created a project from scratch with a view model.
    As you can see in the setter of "Age" property I have a simple logic.
        public class MainViewModel : INotifyPropertyChanged
                public event PropertyChangedEventHandler PropertyChanged;
                private int age;
                public int Age
                    get
                        return age;
                    set
                        /*Age has to be over 18* - a simple condition in the setter*/
                        age = value;
                        if(age <= 18)
                            age = 18;
                        OnPropertyChanged("Age");
                public MainViewModel(int age)
                    this.Age = age;
                private void OnPropertyChanged(string propertyName)
                    if (this.PropertyChanged != null)
                        PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    In the MainPage.xaml 
         <Grid x:Name="LayoutRoot" Background="White">
                <TextBox 
                    Text="{Binding Path=Age, Mode=TwoWay}" 
                    HorizontalAlignment="Left"
                    Width="100"
                    Height="25"/>
                <TextBlock
                    Text="{Binding Path=Age, Mode=OneWay}"
                    HorizontalAlignment="Right"
                    Width="100"
                    Height="25"/>
            </Grid>
    And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
        public partial class MainPage : UserControl
            private MainViewModel mvm;
            public MainPage()
                InitializeComponent();
                mvm = new MainViewModel(20);
                this.DataContext = mvm;
    I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
    Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
    Case 1: Debugger is attached =>
    TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
    Case 2: Debugger is NOT attached => 
    TextBox value will be "18" and TextBlock value will be "18" - CORRECT
    It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
    Has something changed in SL5 and logic in setters is not allowed anymore?
    Configuration:
    VisualStudio 2010 SP1
    SL 5 Tools 5.1.30214.0
    SL5 sdk 5.0.61118.0
    IE 10
    Thanks!                                       

    Inputting the value and changing it straight away is relatively rare.
    Very few people are now using Silverlight because it's kind of deprecated...
    This is why nobody has reported this.
    I certainly never noticed this problem and I have a number of live Silverlight systems out there.
    Some of which are huge.
    If you want a "fix":
    private void OnPropertyChanged(string propertyName)
    if (this.PropertyChanged != null)
    //PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    Storyboard sb = new Storyboard();
    sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
    sb.Completed += delegate
    PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
    sb.Begin();
    The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
    Please don't forget to upvote posts which you like and mark those which answer your question.
    My latest Technet article - Dynamic XAML

  • Events in SubVi not working as expected

    Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
    I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Main.vi ‏11 KB
    SubVi.vi ‏12 KB
    SubVi_2.vi ‏15 KB

    Your main problem is DATA FLOW.  A loop cannot iterate until EVERYTHING in it has completed.  So, as you have it, you have to have both event structures execture before you can go back to look for the next event.  So if you insist on having these subVIs, they need to be in seperate loops.
    BTW, you can get away with a single subVI.  Go into the VI properties and make it reentrant (preallocated clone).  Then each call of your subVI will have its own memory space.  A lot easier to maintain that way.
    And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Main_MODTR.vi ‏10 KB

  • AFS ARUN Size Substitution Not Working As Expected

    Hi All,
    I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
    I have setup some examples but it does not work as expected.
    Here is a small example:
    Say I have a size 28/30, 28/32 .........29/30....
    What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
    with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
    Any inputs will be really appreciated.
    Thanks!!

    srdfrn wrote:
    Hi YOS,
    I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing.  Would you mind posting an example (alongside an image file) that demonstrates this?
    Also, one thing I noticed is that PCX images appear to be quite dated.  Could upgrading them to a JPEG or PNG format be an option for you?
    Thanks,
    Stephanie R.
    National Instruments
    Stephanie, thanks for the reply.
    I am very sorry to state that I made a mistake.
    VAL_SIZE_TO_IMAGE indeed works.
    What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
    I tried with JPEG and it's the same.
    I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
    A panel with two picture rings.
    - SW_1 remains at the intended size and the loaded picture is not clear.
    - SW_2 will fit to picture size and looks OK.
    Appreciate your support,
    YOSsi Seter
    Attachments:
    Load_Image.c ‏2 KB
    ONEP_3Trow_POS1.JPG ‏4 KB

  • Notification "Launch the app and go to the library" not working as expected

    Hello,
    we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
    Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
    Thanks
    Martin

    Ah.
    Ok, now it's clear.
    Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
    Martin

  • DB Adapter polling as singleton process is not working as expected

    Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
    As suggested in oracle documents , below is the parameters configured in composite.xml file.
    <service name="polling_Mange_Alert_Events"
      ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
    <interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
      <binding.jca config="polling_Mange_Alert_Events_db.jca">
      <property name="singleton">true</property>
      </binding.jca>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
      override="may">1</property>
      <property name="jca.retry.backoff" type="xs:int" many="false"
      override="may">2</property>
      <property name="jca.retry.maxInterval" type="xs:string" many="false"
      override="may">120</property>
      </service>
    Below is the JCA file parameters configured :
    <adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
      <endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
        <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
          <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
          <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
          <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
          <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
          <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
          <property name="MarkReadValue" value="Processing"/>
          <property name="PollingInterval" value="10"/>
          <property name="MaxRaiseSize" value="5"/>
          <property name="MaxTransactionSize" value="5"/>
          <property name="NumberOfThreads" value="1"/>
          <property name="ReturnSingleResultSet" value="false"/>
          <property name="MarkUnreadValue" value="Pending"/>
        </activation-spec>
      </endpoint-activation>
    </adapter-config>
    This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
    Please advise to solve this issue ?

    Hi,
    1.Set Singleton property outside   <binding.jca> like this:
    <binding.jca config="polling_Mange_Alert_Events_db.jca"/>
      <property name="singleton">true</property>
      <property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
      <property name="jca.retry.interval" type="xs:int" many="false"
    2.Also you can try setting these values in jca file:
    <property name="RowsPerPollingInterval" value="100"/>
    <property name="MaxTransactionSize" value="100"/>
    3. try to increase the polling interval time.
    Regards,
    Anshul

  • TCP Window sizing not working as expected for Windows server 2008 R2 SP1

    Hi ,
    TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
    Please help.
    Thanks,
    Pro1962

    Hi,
    I think window auto-tuning is enabled.
    You can disable it by running the following commend.
    netsh interface tcp set global autotuninglevel=disabled
    Hope this helps.

  • Container-Managed Transaction Type Attributes not working as expected

    I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
    MethodA{
    for(a lot)
    call MethodB;
    @Transaction Type = RequiresNew
    MethodB{
    EntityManager Persist to database
    I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
    It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
    How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
    Thanks in advance.

    The problem is that EJB invocation semantics for security, container-managed transactions, etc.
    only apply when an invocation is made through an EJB reference. In your case, you are directly
    invoking the implementation method from within the bean. The EJB container has no idea that's
    happening. It's no different than invoking a utility method.
    In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
    through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
    business interface through which the method in question is exposed.
    --ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Namespaces not working as expected

    Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
    Steps to reproduce:
    $ sudo unshare -mn bash
    bash# mount -t sysfs sysfs /sys
    bash# exit
    $ cat /proc/mounts
    Result:
    /proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
    sudo umount /sys
    Expected result:
    The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
    Did I understand something wrong? Or might this be a bug in the kernel?
    Note that when using
    unshare -m bash
    without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.

    Hello, because sysfs is shared, see unshare(1) for more details.

  • Multicam source sequence - audio offset does not work when syncing via audio

    Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
    Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
    Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
    Unlesss I'm missing something?

    I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

  • Lens Correction filter not working?

    I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
    Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
    Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
    The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.

    Jeff,
       Thanks for the quick answer, but I still think the menu is misleading.
       If the body choices were in the format of "full frame, 1.3 crop, 1.6
    crop, etc.", it would be clear that the specific model didn't matter.
    However, this would create its own problems since many people wouldn't
    understand the concept of the crop factor for their camera.
       The fact that the 5D Mark II exists in the pull-down menu as a discrete
    choice in addition to the 1Ds Mark III implies that there is a difference
    between the two. Even if there is no functional difference in this context,
    it would avoid confusion if the actual body from the EXIF information could
    always be the default selection.
       Thanks.
    From: Jeff Schewe <[email protected]>
    Reply-To: <[email protected]>
    Date: Sun, 16 May 2010 23:57:46 -0600
    To: Mike Curl <[email protected]>
    Subject: Lens Correction filter not working?

Maybe you are looking for