CS6 trial has run out and has been activated.

I had to change the date on my computer for a moment this morning while editing a file for school. When I opened up Photoshop, a window popped up saying the trial period has run out on and this will be the last time the product will run before having to be registered. I changed the time afterwards and tried to open up Photoshop and the 'Continue Trial' button is faded out.
Is there something I can do or am I just stuck using CS5?

Hutzon wrote:
I had to change the date on my computer for a moment this morning while editing a file for school
Do yourself a favor:  Don't change your computer's time or date to try to get away with things.  It will just give you all kinds of trouble.
And yes, you've basically shut yourself out of trying Photoshop CS6 any longer.
-Noel

Similar Messages

  • If my iphone 4 warranty has run out and my home button is broken.... How much do I have to pay?

    I have booked an appointment at the apple store near me for next Thursday, but I just wanted to prepare myself! Does anyone know, if the home button breaks when your warranty has run out, how much does it cost to get it replaced? Or do they give you a new one free of charge due to it being a common issue? Many thanks!

    If your iPhone is out of warranty and without an AppleCare plan, then Apple will not replace the iPhone for free. See the Service Pricing section here:
    http://www.apple.com/support/iphone/service/faq/
    There are independent iPhone repair services that may be able to do the repair for less than Apple's out-of-warranty charge. Do a web search for "iPhone repair". Note, though, that if you elect to have the iPhone serviced by an unauthorized shop, all further warranty and support will be voided.
    Regards.

  • The insurance has run out and now my ear phone jack on my iPad is out again. How much will it cost to get it fixed through Apple?

    this is the second time it's happened but I had target insurance on it the first time so I didn't have to pay anything. Now both target and apple insurance has expired and my ear phone jack on the iPad is not working. How much will it cost to fix it?

    Apple does not fix iPads, they will replace it.
    Out-of-warranty* cost:
    iPad mini: $199
    iPad, iPad 2, iPad mini 2: $249
    iPad 3rd generation, iPad 4th generation, iPad Air, iPad mini 3: $299
    iPad Air 2: $379
    http://apple.com/support/ipad/repair/other

  • Suddenly my trial version has run out. I swear I bought this software!

    I purchased aperture online in December of last year. I have installed all of the updates and have been using the software pretty regularly since then. I went on vacation for two weeks (my laptop was at the apple store getting a new LCD during that time), and when I got back and tried to open aperture, I got a message saying that my trial had run out, and it won't let me open the software.
    I tried deleting the license info file in the Library and then re-entering my serial number but that did nothing.
    Anyone ever seen this before? Any clues?
    thanks

    Call Apple support, 1-800-SOS-APPL.

  • Contract has run out i want a better deal from bt.

    I have evening and weekend calls from bt also i have unlimited broadband i cant remember which one but the unlimited download limit but my contract has run out and wonder if i ring them up i would be able to get a better deal or that total broadband does the total broadband mean it does not slow down torrents and things like that too?

    i found you get a better deal from options  
    options team 0800 800 030
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I bought lightroom and need to register my student id, how do i do that, the trial has run out, i have the product code but not the serial number?

    i bought lightroom and need to register my student id, how do i do that, the trial has run out, i have the product code but not the serial number?

    If you purchased a package then there should have been instructions in the box on how to submit your academic credentials. If you purchased online from Adobe then you should have received instructions in an e-mail. But here is a link that might help you. There is a link under Step 2 that will take you to a place where you can enter the information, I think.
    Adobe - Adobe Education Store : Proof of Academic Indentification

  • Trial period has run out?

    trial period has run out? please enter your serial number? And paying 49.99 a month?
    hours on the phone with tech support... hours chatting, and nobody knows how to fix this? Once and for all? I can't spend hours uninstalling and cleaning and re-installin cs6 all the time, the only thing that seems to fix this, temporarily....
    and of course this always happens on a Friday night, just as all tech support is going home for the weekend, leaving me stranded...(I work 7 days a week)

    Hey Schoups,
    The conflicts should be resolved when you install the latest version of the Adobe Application Manager. You might have to use the "License This Software" button one more time and sign into to your CS6 product with your Adobe ID but after that you should be able to use both CS6 and CS5 versions together on the system without issue.
    Windows
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac OS
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    -Dave

  • I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

  • I killed my computer with coffee. It's out of waranty and applecare has run out. It's a 4 year old Macbook Pro. Any idea whether it makes sense to try and fix it?

    I killed my computer with coffee. It's out of waranty and applecare has run out. It's a 4 year old Macbook Pro. Any idea whether it makes sense to try and fix it?

    Nothing works at all. When I spilled the coffee I shut it down, unplugged everything, turned it over and put paper towels beneath it to drain. Made the mistake of turning it back on after a couple of hours. It worked but emitted strange noises from the internal speakers. Turned it back off, but have not been able to turn it back on since. I disassembled the entire macbook yesterday, found coffee stains on the keyboard components. Tried to turn it on and get nothing. The only sign of life is the battery indicator. When I press the button the series of green lights come on, but that's it. Thanks for your responses. Jaylloyd

  • I have CC 2014 but it says my trial has run out?

    I have a copy of Adobe CC 2014. I am logged in correctly but it still says my trial has run out?

    This Email does not have any CC registered to it, please try
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    Creative Cloud products revert to trial after upgrading to Mac OS X 10.7.4 | CCM
    They have important information.
    Regards
    Rajshree

  • I have lost my ipod and the battery has run out

    help please

    (glad you appreciated it.)
    Unfortunately, it's simply a matter of physically looking for it, and start by (as Squishpoke suggests) remembering where you were when you last saw it.
    It happens to all of us, when you mislay something, you have to look for it and there's no magical method for an iPod that has run out of power.
    ...and if I applied a metal detector to my face,  I guess it would bleep due to the tooth caps in my mouth!

  • My iPod touch 5 has run out of battery and wont charge what do I do?

    My iPod touch has run out of battery and is failing to charge or turn on! What do i do?!

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Your system has run out of application memory Premiere pro cc 2014

    Hi,
    I've been getting the "your system has run out of application memory" message while working on a new project in pr pro cc.
    Here's what i've done so far:
    Updated to OS X 10.9.5 and restarted computer
    went into my activity monitor and stopped programs that were taking up memory, but that didn't solve the problem the message would pop up over and over again.
    this is the first time i've seen this message. I installed the universal free trial red giant plug ins for PR Pro . I'm starting to think that the plug ins are the problem.
    I used several of the universal plugins from red giant on my entire project. I was able to export the project twice w no problems but then when i went back into the project and the notification kept popping up!
    I'm using
    PLS HELP!!!
    thanks!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash or panic reports. If you don't see that heading, select
    View ▹ Show Log List
    from the menu bar.
    A crash report has a name that begins with the name of the crashed process and ends in ".crash". It may be under either of the two subcategories, "System" and "User." A panic report has a name that begins with "Kernel" and ends in ".panic".
    Select the most recent of each and post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as a hang log — they're very long and not helpful.

  • 'Your system has run out of application memory'?!

    I've seen many users experiencing this same problem throughout the community, but none of the fixes have given me a permanent solution. Details of the machine are below, as well as what happens when the problem hits/triggers.
    MBP Retina running OS X Yosemite 10.10.2 (occurred in previous versions as well, thought the latest update would help but it didn't)
    15-Inches Mid 2014 with 16 GB of Ram
    Been using this Mac for good 6 months now, and one fine day of normal usage the whole system seems really laggy and slow and all of a sudden i'm unable to access anything and barely move my mouse. Then, a window pops out, telling me "Your system has run out of application memory", gracefully showing me that I have to force quit all my programmes for me to just stare at my desktop in utter disappointment.
    I've been using Yosemite for awhile now (updated few days since the release) and haven't encountered any major issues, this being the first. Reading through many threads many have said that the problem lies with opening the Mail app, yet I haven't touched that app in months. I've also tried resetting the PRAM on my machine when it happens and the problem comes back again after several minutes of normal usage (iTunes, App Store). Checking the memory usage with the Memory Clean app, it tells me I'm down to a measly '15.58 MB' of memory, and it justfluctuates at that until I give it a restart again. This can't keep happening - I can barely use the Mac for 10 minutes without having to restart it, only to be able to use it only again for another 10 minutes.
    Opening Activity Monitor tells me that mds_stores is the main root of the problem, yet I can't seem to shut the process down. I've googled and many say that mds_stores is spotlight indexing, but taking up all 16 GB of ram? That shouldn't be the case. Is there a fix to this? Does Apple know of its existence?
    Included some screenshots below:

    Step 1
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. 
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.
    Step 2
    Enter the following command as in Step 1 and post the output:
    mdutil -as 2>&- | pbcopy
    You can then quit Terminal.
    Step 3
    Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

  • Mac Desktop Manager - Device has run out of memory

    So, long story short, this is the latest (of a very long string) of error messages. I have been able, with the help of these forums, to troubleshoot all the others.
    I am syncing my BB 8120 (v4.5.0.174) to iCal with the Desktop Manager, only set to sync calendar. It simply drops with an error that the 'Device has run out of memory'. Checking the Applications tab shows 17mb of free space.
    History:
    I got this Blackberry a few months ago, deciding I wanted a robust phone with good battery life that had email.
    I use gmail. Apparently this is not compatible with BIS, and had continual problems. This is still unsatisfactory - I have to use the gmail app which causes problems (hanging) and does not support push.
    I was dismayed to discover that a Blackberry sync client for Mac had only recently been announced, however I persevered.
    When it was released, I started using it, but it has continually given errors on all manner of different combinations.
    I recently solved the contacts problem by syncing using the Google sync, which syncs also with my mac over the air.
    This is not a solution for the calendars because iCal does not support google calendars well enough for my liking.
    The phone sporadically has a spinning hourglass, for what reason(s) I cannot determine, even after battery pulls etc.
    Suffice to say I have spent hundreds of hours troubleshooting this phone over the last months. For a phone whose main selling functions are email and organisation, it does neither of these reliably or well.
    If I do not solve this problem soon I will return to my old phone which supported everything above more reliably, and had 4 times the battery life to boot. The only thing I would miss is the qwerty keyboard.
    Mac OS 10.6.2 MacBook Pro

    Ah yes, good old Project Manager. There are plenty of times when it causes more problems than it solves.
    You might try deleting the following folder:
    User/Library/Preferences/Logic/PM Data
    If you use Project Manager, it's easy enough to rebuild the table. If you don't then don't worry - just delete it. By the way, if you're into Project Manager or would like to know more, go to the website of the perhaps the most generous man in the Logic world, Edgar Rothermich and grab some of his user manuals.
    http://homepage.mac.com/edgarrothermich/Manuals.html
    Pete

Maybe you are looking for

  • How configure GR/IR Automatic Clearing

    Hi Friends, How I configure GR/IR Automatic Clearing. Whatu2019s the path in SPRO t-code. Please help me. Regards, Hemant Maurya

  • How to load different modules in moduleLoader - some with other without unload?

    Ok so I've read a lot about modules and I decided to build a site where I have a button bar menu and a single moduleLoader, where all of my pages are separate modules. Some of the modules will be preloaded with moduleManager technique so they will be

  • Need help in ALV

    Hi folks, I have a requirement in ALV format where the workcenters should be displayed in the first row.. and the corresponding Procurement & setup should be displayed under that corresponding workcenter.                        WOrk Center           

  • SQL Server Reports not showing up

    Hi, I've a strange situation with my reporting services, sometimes the reports doesn't show up anything in the browser, when I check the reporting services will be up and running in the configuration manager and  in the services. When ever it happens

  • Getting zero to display as the first character

    I know this should be simple, but I'm trying to get a zero to display as the first character in a field when necessary.  For example last 4 of SSN.  Any help would be appreciated.