CSCuo38919 - TMS - Feature request to support Huawei endpoints

Dear Gentels
is this issue solved or not yet?
please advice

Hi,
Thanks for your recommendation Magnus,
The software check has been disabled and reenabled many times in the past to no avail.
We're holding off doing it againet just yet as it deletes all of the logs.
The proxy has also been removed and readded many times without a change of behaviour.
The proxy is currently removed so there is NO proxy!
We're noticing in the logs if usually fails around the same time about 9 minutes in as per below.
When it does succeed it takes about 15 min but we see several end points failing consistently everytime (up to 19 now and increasing). I am going to check some of these manually.
This consistency in failed time suggests to me it is unlikely a connectivity issue. I'm am wondering whether it has something to do with the number of endpoints that need their SN checked (over 2,500) or related to some of the endpoints failing? (or the number that are failing)
22/10/2012 8:52 AM - Event executed by XXXXXXXXXXXX
22/10/2012 8:52 AM - Software update check started. Connecting to the update service.
22/10/2012 8:54 AM - Update check error for system XXXXXXXXXX.
22/10/2012 8:54 AM - Update check error for system XXXXXXXXXXX
22/10/2012 8:55 AM - Update check error for system XXXXXXXXXXXX
22/10/2012 9:01 AM - Update check failed. Please see system logs for details. Note that TMS must have internet access to contact the software update service.
22/10/2012 9:01 AM - The event failed to complete. Details: Update check failed. Please see system logs for details. Note that TMS must have internet access to contact the software update service.
I've just opened a new TAC case so will see if TAC have any recommendations other than a wireshark trace!
Thanks!

Similar Messages

Feature Request: iTunes support CD drive letters A&B

Not sure how to submit this feature request to Apple for iTunes for Windows enhancement so I figured I would start at the forum.
I know in the "dark ages" drive letters A&B where pretty much reserved for floppy drives. Not sure how many computers are actually still in use running Windows XP and up that still have one of those drives.
Therefore, for some time now these two drive letters have gone unused. C: in general was the first HD letter, and CD-Roms (or now DVD/Blu-Ray) drives started somewhere with D: and above depending on your computer configuration.
I changed my setup a while ago and named my two DVD drives A & B since Windows supports it just fine, as do a lot of other programs, with the exception of iTunes :-(. For some reason, iTunes will not support reading CDs from drives A or B, even if Windows autorun feature is enabled asking if it should import the CD into iTunes. Apple, what's up with that? Why actual restrict reading music from CD drives assigned letters A & B? Is this an old piece of code still lingering around in iTunes?
So, simple feature request for an upcoming iTunes release, please enable reading/important CD music from drives labeled A&B so that we can start using these letters again as well.
Anybody else want to support this simple request that should be fairly easy for Apple to implement?

We're a user-to-user community, so there's no guarantee that an Apple person will see your request. But you can make enhancement requests directly to the Apple folks if you like. Here's a link to the iTunes product feedback form:
http://www.apple.com/feedback/itunesapp.html

Feature Request: Collection Support

I already submitted this as part of a long laundry list of feature requests. Its becoming pressing enough that I thought it warranted its own post.
The purpose of this feature is to allow collections to be built using any programmatic algorithm combining information available ala SDK or XMP. Example function calls:
- LrCollections.createNewCollection( collectionName, clearIfAlreadyExisting )
- LrCollections.addToCollection( photo )
That would do it.

Dynu.com uses a HTTP-update mechanism. So you can change the updater-settings in your config to match the syntax from dynu. The URL is shown in their SDK: http://downloads.dynu.com/files/basic_sdk.txt
Sent from Cisco Technical Support iPad App

Feature request: Replaygain support for FLAC files

Hi guys,
When converting some of my mp3's to FLAC, I noticed that the REPLAY_GAIN_TRACK tags are not used by the Walkman app on my Z3C. It works perfectly for mp3 files though. This is a real obstacle for me as I do not like having to change the volume all the time when playing different kinds of music.
So my request would be to extend the replaygain support to FLAC files. I think anyone who uses FLAC files would consider that a very welcome addition, and it should be really easy to do!

No, the album art actually works for both mp3 and FLAC. What I'm referring to is the REPLAY_GAIN_TRACK tag that you can attach to your files (for mp3 you could use e.g. the program called mp3gain). This allows you to normalize the volume of each track to for instance 92dB. When you do this, you will find that each track plays at a pleasant loudness without having to change the volume all the time. Or to put it differently, if this tag is not supported (like for FLAC at the moment), then I'm listening to one track and when the next one starts it may be way louder or quieter, meaning I have to reach for my phone and change the volume. It really is a very nice feature to have, and since Sony has it working for mp3 it seems very easy to extend this support to FLAC as well.
Are you having issues with album art though? Perhaps I could help you then.

Feature request: keymapping support for basic GVIM style editing

Maybe this isn't the right forum, but it seems to be the only mechanism for providing
feedback. I'm getting used to the workshop environment and like a lot of the
features it provides. Tab completion of methods, parameter info, import automation
are all very nice modern features. I come from a Unix background and cut my teeth
coding on VI and GVIM off the command prompt. A feature that would really sell
me on an IDE and many that I know, would be some support for VI keymappings.
Once you are used to an editor that doesn't make you run to the mouse or the arrow
keys every time you need to move the cursor, anything less feels slow and taxing.
If basic support for "VI like" operation could be added, I think you'd find more
people like myself willing to spend time in the IDE for its other features. GVIM
offers a rich set of features, of which about 10 would suffice for most of what
I do.
1. insert/navigate modes so you can use ijkl instead of arrow keys.
2. support for '/' as a search prompt as well as 'n' and 'N' to jump between
findings.
3. support for regular expressions on the search line
4. support for regular expressions via a VI style substitute command {range}:s/search/replace/
5. :w for write or "save"
6. :e to open a file
7. 'A' to jump to the end of a line and enter insert mode.
8. 'D' to delete beyond the cursor to the end of the line.
9. :line-number to jump to a line number.
10. 'x' to delete a character and 2x for two etc...
Okay, my list goes beyond ten if I continue, but if I could perform basic editing
without having to go to the arrows or the mouse or a separate window of gvim,
I'd be a happy customer.
Thanks,
Morgan

Morgan,
The engg team has confirmed that its a goal to support this in the next
version.
Thanks for the suggestion. Keep them coming!
-Anurag
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Hello Morgan,
I have forwarded the information to our engineering team for evaluation.
Regards,
Raj Alagumalai
WebLogic Workshop Support
PS: Wasn't sure if you had come across the kit available at
http://dev2dev.bea.com/products/wlworkshop81/workshop_ext.jsp
"Morgan Hall" <[email protected]> wrote in message
news:[email protected]...
Worth noting, I just found viPlugin for Eclipse on Sourceforge.net.
From
the looks
of the documentation, it will act as a layer on top of any JDT editor oran editor
that extends ITextEditor, which might be an Eclipse class. Hope thathelps your
development team.
"Raj Alagumalai" <[email protected]> wrote:
Thanks for the feedback Morgan. I will make sure that this information
is
forwarded to our engineering team. We love to hear what our customers
feel
about the product.
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Morgan Hall" <[email protected]> wrote in message
news:[email protected]...
Maybe this isn't the right forum, but it seems to be the only
mechanism
for providing
feedback. I'm getting used to the workshop environment and like alot of
the
features it provides. Tab completion of methods, parameter info,
import
automation
are all very nice modern features. I come from a Unix background andcut
my teeth
coding on VI and GVIM off the command prompt. A feature that wouldreally
sell
me on an IDE and many that I know, would be some support for VIkeymappings.
Once you are used to an editor that doesn't make you run to the mouseor
the arrow
keys every time you need to move the cursor, anything less feels slowand
taxing.
If basic support for "VI like" operation could be added, I think
you'd
find more
people like myself willing to spend time in the IDE for its otherfeatures. GVIM
offers a rich set of features, of which about 10 would suffice formost of
what
I do.
1. insert/navigate modes so you can use ijkl instead of arrow keys.
2. support for '/' as a search prompt as well as 'n' and 'N' to jumpbetween
findings.
3. support for regular expressions on the search line
4. support for regular expressions via a VI style substitute command{range}:s/search/replace/
5. :w for write or "save"
6. :e to open a file
7. 'A' to jump to the end of a line and enter insert mode.
8. 'D' to delete beyond the cursor to the end of the line.
9. :line-number to jump to a line number.
10. 'x' to delete a character and 2x for two etc...
Okay, my list goes beyond ten if I continue, but if I could performbasic
editing
without having to go to the arrows or the mouse or a separate windowof
gvim,
I'd be a happy customer.
Thanks,
Morgan

Feature Request: HDR support

HDR is becoming more and more important.   LR really needs to support 32-bit PSD and TIFFs.   It would also be nice if it support OpenEXR and HDR file formats.

I think that supporting HDR files is really independent of how well PhotoShop handles them.   Though, in my experience OpenEXR support is fine in PS.   But having LR completely ignore 32-bit files whether they are OpenEXR, TIFF, PSD, or Radiance files is really a problem.   On projects that use them, having them missing from the LR browser complicates management of the project.   Even if there is no support for HDR in the develop module, just being able to import and see them from the browser and have them be meat for plugins or external editting would be a big win.
As to the stacking feature suggestion:
   Maybe this should be a separate thread as the handling of stacks is really independent of support for HDR.
Brent

Feature Request - DynamicDNS Support

Is it possible to add the support for
http://www.dynu.com
for DynamicDNS within CISCO firmware? DynDNS and TZO.COM is not longer free of charge.
Thanks in advance!

Dynu.com uses a HTTP-update mechanism. So you can change the updater-settings in your config to match the syntax from dynu. The URL is shown in their SDK: http://downloads.dynu.com/files/basic_sdk.txt
Sent from Cisco Technical Support iPad App

Feature request to support ICE

ICE is adding "In Case of Emergency" information to your phone contacts. I would like to have ICE information on my phone but I also want to password protect the phone. The feature would be to enable access to ICE identified contacts & information with the password enabled.

In here, "we" are users like you.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

OS/X RDP client feature request - Applescript support

The new OS/X RDP client is very nice overall, but it can't be easily scripted. You can get most of the way there using OS/X UI scripting:
tell application "Microsoft Remote Desktop"
activate
tell application "System Events"
set frontmost of process "Microsoft Remote Desktop" to true
tell process "Microsoft Remote Desktop"
keystroke "f" using {command down}
keystroke "a" using {command down} -- select all
key code 51 -- delete
keystroke item 1 of argv --search query
keystroke tab
key code 126 -- up
key code 125 -- down
key code 36 --enter
end tell
end tell
end tell
But UI scripting is brittle. For example, the recent update to the RDP client pops up a dialog box announcing the new changes - that breaks the UI scripting. You have to launch the app and clear the dialog box before the UI scripting starts working again.
It would be much simpler and far more reliable if the OS/X RDP client supported Applescript to both list desktops and to connect to a desktop.

Hi,
Thanks for the feedback and I will forward your concern to the product team.
Best Regards.
Jeremy Wu
TechNet Community Support

[Feature Request] Better support for new buttons in JUNavigationBar

In my project I use a home made sub-class of JUNavigationBar, which contains some new functionality apart from a new button as well. This button allows me to refresh the currently selected row.
However, since I added this button though a simple this.add(), some of the functionality in JUNavigationBar may get confused.
For example, when I have removed some of the standard buttons but left my own button in place (setHasXXX()), the component index (calculated in JToolBar) and the array index for the buttons in JUNavigationBar may not match. This occasionally causes an ArrayIndexOutOfBoundsException.
In short, what I'm asking for, is a better way to manage buttons on JUNavigationBar. Even making the array of buttons and related methods and such protected in stead of private (so that my sub-class could handle it) would be a good start.

Hi Arno,
I had a similar issue with trying to create a Nav bar with dynamic content. My solution was to leave all the standard buttons in place and to use setVisible(x) to make them appear or not as required.
BTW have you noticed that rollover behaviour isn't consistant ie works for FIRST/LAST etc but not for FIND/QUERY.
Regards
Andy

SSLSocket to support NIO - feature request voting

Hello All,
I know there were many discussions here regarding this subject.
I've seen the SSLEngine solution for the problem... But I didn't like it since it is too complicated.
For my understanding SSLSocket inherits Socket so an application that can handle Sockets should be able to handle SSLSocket without writing a specific code besides the factory.
NIO allows Socket to be none blocking... So why SSLSocket which is a Socket does not?
If I write a Web server in Java, why should I deal with none SSL and SSL connections in a different way?
I recently wrote one threaded NIO server and was amazed that I could not use SSL with the same implementation.
I've opened a feature request for Java, but they told me to gain support for this subject here before they will consider it...
As I understand I can re-implement SSLSocket to use SSLEngine and support NIO with blocking and none blocking support... But I think Sun should do it.
One caveat is to make sure that the SSLSocket HandshakeCompletedListener should be called by a daemon thread, so that it will not block other sockets while certificate verification occur.
Of course when I refer to SSLSocket I also refer to SSLServerSocket.
Can you please comment regarding this issue... Every comment will be welcomed!
Best Regards,
Alon Bar-Lev

nah, I am very glad they released an engine separate from transport allowing encryption on any transport.
I am also working on an abstraction of nio that you may be interested in if you don't want to do the security yourself......it is here...
http://sourceforge.net/projects/channelmanager
Right now, it only contains the api, but there are 3 implementations behind it right now with 3 to be added.
1. Basic implementation that does just nio
2. Secure implementation that implements same api and uses implementation 1
3. Packettizer implementation which puts things in payloads with headers and footers
4. (to be added) Threadpool implementation allowing a threadpool to be inserted in the stack somewhere
5. (to be added) TestProxy implementation allowing exxceptions to be thrown on purpopse to test a system on a bad network....can test failure on bind, connect, read, write, etc....everything.
6. denial of service layer.
7. Exception catch layer to protect #1 and #4 mainly from bad clients that throw exceptions back to the channelmanager.
Each one of these layers (2 - 4) implements the same api and uses the same api so 2 -4 are all proxies. You can reorganize the proxies as you want.
The secure one is almost done. Any comments on the api will be welcome.
thanks,
dean

Feature request: more xpath support in XMLElement

Hey guys,
Just wanted to submit a feature request. I'm trying to write code to find the number of Invocation service threads that Coherence uses. It would be very nice if I could use XPath syntax such as the following:
getSafeElement("cluster-config/services/service[@id='3']/init-params/init-param/param-value")
Since the API doesn't support that, I have to resort to something like the following:
XmlElement services = com.tangosol.net.CacheFactory.getClusterConfig().findElement(
        "cluster-config/services");
List servicesList = services.getElementList();
for (Iterator i=servicesList.iterator(); i.hasNext(); ) {
    XmlElement element = (XmlElement)i.next();
    if (element.getAttribute("id").getInt() == 3) {
        XmlElement value = element.findElement("init-params/init-param/param-value");
        System.out.println("invocation threads: " + value.getInt());
}I haven't quite gotten that to work yet, but it's probably close. :)
Thanks,
Matt

Matt,
There is a helper function in com.tangosol.run.xml.XmlHelper class that makes it almost as easy as using the XPath.
XmlElement xmlCluster    = CacheFactory.getClusterConfig();
XmlElement xmlInvocation = XmlHelper.findElement(xmlCluster,
        "cluster-config/services/service/service-type", "Invocation");
XmlElement xmlThreads    = XmlHelper.findElement(xmlInvocation,
        "../init-params/init-param/param-value");
System.out.println("invocation threads: " + xmlThreads.getInt());Regards,
Gene

Feature request: Slideshow module support for video files

I'm very excited about your MTS support!
Feature request: Slide show module support for video files...
Say you have 10 takes to choose from. Are you able to almost like SLIDESHOW view the 10 clips full screen so you can decide, like a playlist? Or rate them as they play? It would also be great, like SLIDESHOW to be able to export a MP4 with a title, the 10 clips you are working with, and maybe add an end title and a song, just like SLIDESHOW.
I have found editing stills like this in slideshow far faster than in any other editing program.
Basically, I just need a fast means to view or export an MP4 of a set of video clips to review. You are almost there.
great job!!!
Max

I was also disappointed that video is not supported in the slideshow module -I currently have to use another solution when I want stills mixed with videos, would be great to be ablo to keep it all in LR!

Feature request: Support for more than 2 monitors

I currently use an external monitor for my critical editing/evaluation as my iMac display doesn't reproduce reds very well. I understand newer iMacs can support 2 external displays, obviously desktop machines can support as many displays as there are open slots for video cards.
While editing a photo shot in portrait on a monitor set for landscape is not a problem, it would <really> be cool to have two external color-accurate monitors for developing/loupe views, one oriented in portrait, one in landscape, with the third (iMac in this case) showing the develop controls. Even if the two external monitors showed the same image, one would always be fullscreen in the correct orientation.
MacOS and Windows both give the user control over all the displays connected to a given system, so driving a portrait and a landscape monitor simultaneously shouldn't be a problem from an OS/hardware standpoint.
Is this something that can be rolled into LR4?
Respectfully,
Andre

I use 3 or 4 monitors too, so that's one I'd like to see too. We wouldn't want the request to get lost in beta land, so might I suggest adding the request to the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked? If you post the link to your request here, others can also vote on your request.

Feature Request: support previews for png files

hello,
i like to see previews supported for png files. This is a common file type and should be supported Especially since it is one of the options supported for export to creative cloud from photoshop touch. It would make a lot more sense.
Thanks.

You would want to go here for feature requests: Photoshop Family Customer Community
Gene

CSCuo38919 - TMS - Feature request to support Huawei endpoints

Similar Messages

Maybe you are looking for