CSM-S "Configuration Sync is not supported by this card"

This is the message everytime I try to sync the cards.
NETCSP01#hw-module contentSwitchingModule 5 standby config-sync
Configuration Sync is not supported by this card
NETCSP01#
The are both installed into the same 6513.
Here are the configs
module ContentSwitchingModule 4
ft group 1 vlan 400
priority 30 alt 20
vlan 200 client
description Client Facing CSM Interface
ip address 192.168.100.6 255.255.254.0 alt 192.168.100.7 255.255.254.0
alias 192.168.100.8 255.255.254.0
vlan 100 server
description Server Facing CSM Interface
ip address 172.18.10.6 255.255.254.0 alt 172.18.10.7 255.255.254.0
alias 172.18.10.8 255.255.254.0
module ContentSwitchingModule 5
ft group 1 vlan 400
priority 20 alt 30
I am running the following version
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXE4, RELEASE SOFTWARE (fc2)
What am I missing?
Thank you!!

The configuration synch feature is supported from CSM-S version 2.1.1. I suggest you upgrade your device for using that feature.

Similar Messages

  • Backup Assistant Service Failed - Sync state not supported by this operation

    I have a Samsung Stratosphere running Gingerbread 2.3.5.  Recently I tried to use the Backup Assistant app and it gave me the error message:
    Service Failed
    Sync state not supported by this operation
    How do I get it to work again?  I can't think of anything that could have caused this.  It worked when I first got the phone.

    I clicked on "backup my contacts" and they backed up--I see them.  Here is
    the strange thing:  the first person to get back to me told me to disable
    the app since it didn't work well with Android.  I did that.  Two days
    later, it started to back up.  Huh?????  Seems like it is inconsistent.
    So, do I just wait until it doesn't work again  (dumb question--what else
    can I do???).  Does this happen to others?
    Thanks so much.  I am new to Verizon and so far I am pleased and really
    like that you got back to me!!
    Sincerely,
    Fran
    On Wed, Nov 21, 2012 at 6:10 PM, Frances Purcell-Abbott <

  • GRMG RFC Configuration "HTTP method GET is not supported by this URL"

    Hi All,
    when i create the RFC Destinaton for SLD  with regards to GRMG Configuration and test the rfc i get the Reason code 400 with error "HTTP method GET is not supported by this URL".
    Even if i call  http://hostname:port/sld/rtc in the browser i get the same error.
    RFC Details:
    Target machine:Host
    Service No: port no
    path prefix: /sld/rtc
    My other RFC destinations for rwb,IR,ID,Adapter Engine works well.
    I would appreciate your suggestions on this
    Aravind

    Hi David,
    I feel sorry to wake this thread up after long time.
    It's the same situation, connection testing for SLD returns 400 "HTTP method GET is not supported by this URL".
    However, CCMS hearbeat seems to work fine with SLD. It returns green.
    I have a question here. Is it OK if we leave it that way without changing GRMG?
    Is there any potential problem, or side effect when the RFC destination returns 400?
    Thank you very much,
    Teyun

  • JDWP-based debugging not supported in this configuration

    I can't seem to get the debugging feature of SQL Developer to work. I current use Quest SQL Navigator and I can debug with that product just fine. I have set my connection up using the basic tab after reading about a possible bug using the TNS tab. I can connect fine, but when I try to debug I get the following...
    ORA-30683: failure establishing connection to debugger
    ORA-30679: JDWP-based debugging not supported in this configuration
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    ORA-06512: at line 1
    Any ideas?
    I'm running SQL Developer on a Windows XP box and my database is an Oracle 10g running on VMS.
    Thanks

    Has your database schema been granted the privileges to do debug?
    DEBUG ANY PROCEDURE
    DEBUG CONNECT SESSION
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    Mike

  • Updated to IOS 8.0.2 now iphone will not sync to Bose or Phillips docking station. Receiving Iphone not supported by this accessory error. Please help!

    I Updated from ios 7 today to iOS 8.0.2. Now my phone will not play music from neither my Bose or Phillips docking stations. Receiving iPhone not supported by this accessory error. Does anyone know how to fix this?

    Hey Aclinkscales,
    Thanks for the question. It is my understanding that you are experiencing issues using third-party bluetooth devices after updating to iOS 8.0.2 - The following resources should help troubleshoot any issues you are experiencing:
    If you can’t use a Bluetooth accessory or car kit
    http://support.apple.com/kb/ht6473
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks,
    Matt M.

  • Error message charging is not supported with this accessory

    I have an iPhone 3GS from Jul 2009. Fully updated. I normally charge it using a USB port on my MacBook Pro so it also syncs at the same time. This week began getting an alert on my phone which said "charging is not supported with this accessory". I resolved initially by unplugging/replugging the cord. In all cases the phone had been charging for some time before the alert appeared. In most cases the phone was sitting on the same surface as the macbook and had not been moved since beginning charge.
    The only support document I can find refers to firewire and does not apply to my device.
    Since starting this week it is happening more frequently and may require being re-connected several times.
    It is still intermittent issue but I depend on my phone.
    Thank you for your assistance

    I just found some on eBay for about 1.99 each with free shipping and ordered about 6 of them from the seller, I think they came from China so it takes a couple weeks. So far I never got a bad cable, but if you do use eBay please check their feedback to make sure they have a history of delivering quality cables and working cables. Always pay using PayPal if possible so you don't lose your money. There are online sites like Meritline and such that have cheaper cables for direct sales with PayPal checkout and free shipping.
    I use the 6' cable in the car, so I don't have figure where to put the iPhone or iPod when plugged into the stereo and it is helpful to have them when trying to charge when the plug is being a dresser or something when I travel.
    I also like the retractable cables ($0.99)
    I also have the Scosche FlipSYNC Keychain cable too, a bit expensive, but you always have a cable with you just in case.
    Message was edited by: cls24

  • Raid Utility Error Message "raid utility is not supported on this computer"

    I am not doing anything that I know of, but Raid Utility keeps opening up on its own, and a message pops up multiple times a day telling me "raid utility is not supported on this computer"
    Anyone have any idea how to fix this?

    Network startup is if you want to start your macbook using a network drive.
    Keep your startup settings at your current drive.
    Raid utility doesn't apply to you since you only have one hard drive installed, unless you installed another hard drive in your optical bay.
    Fibre Channel is another type of hard drive connection via network connection.
    You can't access things you don't have installed in your macbook.  Those are there in case you decide to have a network drive start up options, a raid configuration of a fibre channel network drive.

  • The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

    After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 Secure Store Service         
     Secure Store                   g0n6 High     The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
    trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
    operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
    e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
    has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)    
    at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     Getting Error Message for Exception System.Web.HttpUnhandledException
    (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
    at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.86  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        aat87 Monitorable   b3b6e19b-7de2-e016-ad32-0fc975829ef0
    Is it a bug or any issue in configuration?
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    Hello
    something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
    1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
    1>  MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
    2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
    2>  Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
    2>  Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
    2>  Copying all files to temporary location below for package/publish:
    2>  obj\Debug\Package\PackageTmp.
    2>  Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
    2>  Adding sitemanifest (sitemanifest).
    2>  Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding declared parameter 'IIS Web Application Name'.
    2>  Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
    2>  file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
    2>  To get the instructions on how to deploy the web package please visit the following link:
    2>  http://go.microsoft.com/fwlink/?LinkId=124618
    2>  Sample script for deploying this package is generated at the following location:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
    2>  For this sample script, you can change the deploy parameters by changing the following file:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
    2>  Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
    3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    3>Active Deployment Configuration: Deploy App for SharePoint
    3>Uninstall app for SharePoint:
    3>  Skipping the uninstall step because the app for SharePoint is not installed on the server.
    3>Install app for SharePoint:
    3>  Uploading the app for SharePoint...
    3>  Creating a trusted root authority in SharePoint for IIS Express.
    3>  Installation is in progress (00:00:00)
    3>  Installation is in progress (00:00:01)
    3>  Installation is in progress (00:00:02)
    3>  Installation is in progress (00:00:03)
    3>  Installation is in progress (00:00:05)
    3>  Installation is in progress (00:00:06)
    3>  App failed to install, cleaning up...
    3>  App installation cleanup failed due to errors.  Please see the app on the SharePoint site’s “Site Contents” page for details.
    3>  App installation encountered the following errors:
    3> 
    3>  @"Error 1
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3> 
    3>  @"Error 2
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    ========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    ========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

  • SSRS in SharePoint Mode: Reporting Services scale-out deployment is not supported in this edition of Reporting Services [not true]

    Hello,
    We are experiencing some issues with SharePoint 2013 which is driving me insane.
    We have a deployment with two SQL Servers (HA groups) and four SharePoint servers: 2 Application servers, and 2 Web FrontEnd servers.
    We installed SSRS for SharePoint in both application servers. The disc I have used is the MSDN image of SQL Enterprise 2012 w/ SP2.
    ISO name: en_sql_server_2012_enterprise_edition_with_service_pack_2_x64_dvd_4685849.iso
    MD5: 003e14c55fa648ad15f8be1e2439bd06
    The installation completes without any problems. We can start the SSRS SharePoint Service in the first application server without any issues. However when we try to start the second one, we get the following error:
    Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the sql reporting services service in the farm. The SQL Server Reporting Services cannot be started on
    this server unless it is stopped on all other servers in the farm.
    Now I am at a loss here. As I mentioned, we have used an image of SQL Server Enterprise. This is the same image we used on other environment, which worked as expected (we got no such error).
    I have included the text related to the correlation error from the SP logs below.
    Has anyone ever seen this issue before? Very, very strange!
    Regards,
    P.
    01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://spap-01:5555/_admin/Server.aspx?ServerId=7f7d5eec-3791-44cf-a992-673eaea90f48) 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostAuthenticateRequestHandler). Execution Time=9.742 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.28 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General 6t8h High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.23, Original Level: Verbose] {0} 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.28 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Web Controls 88wu High [Forced due to logging gap, Original Level: Verbose] SPGridView.OnRowCreated() - Row.RowType={0}, .RowState={1}, .RowIndex={2}, .DataItemIndex={3} 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.37 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General af4yd High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.28, Original Level: Verbose] TenantAppEtag record requested but there is no sitesubscription or tenantId for site {0} so we will use the WebApp Id for the cache. 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.37 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Asp Runtime aj1kp High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.43 OWSTIMER.EXE (0x1F10) 0x0B40 SharePoint Foundation Health abire Medium Failed to Sql Query data XEvent collector on sql-01. The error is Object reference not set to an instance of an object.
    01/29/2015 14:13:26.51 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 7034 Critical An attempt to start/stop instance of service Microsoft SQL Server Reporting Services Shared Service on server SPAP-01 did not succeed. Re-run the action via UI or command line on the specified server. Additional information is below. Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.53 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.40, Original Level: Verbose] SQL connection time: 0.0821 for Data Source=sql-01;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][SharePoint_Config] 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.53 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 88b9 High [Forced due to logging gap, Original Level: Verbose] Determining if the current user is a SharePoint Farm Administrator 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.53 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject ReportingWebServiceInstance. Version: 1118292 Ensure: False, HashCode: 52212853, Id: 5a4058b9-2ecd-421e-b9ae-818bbc57c8c6, Stack: at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.79 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.57, Original Level: Verbose] SQL connection time: 0.0965 for Data Source=sql-01;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][SharePoint_Config] 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.79 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.86 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 88ch High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.84, Original Level: Verbose] {0} 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.86 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General 8nca Medium Application error when access /_admin/Server.aspx, Error=Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. at Microsoft.ReportingServices.SharePoint.SharedService.Service.ReportingWebServiceInstance.Provision() at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.87 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Runtime tkau Unexpected System.InvalidOperationException: Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. at Microsoft.ReportingServices.SharePoint.SharedService.Service.ReportingWebServiceInstance.Provision() at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.89 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.InvalidOperationException: Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. at Microsoft.ReportingServices.SharePoint.SharedService.Service.ReportingWebServiceInstance.Provision() at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.92 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,2 agb9s,9 b4ly,309 8xqz,331 8nca,15 tkau,8 ajlz0 6f83e49c-cc03-d049-90f4-81439b542cf8
    01/29/2015 14:13:26.92 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://spap-01:5555/_admin/Server.aspx?ServerId=7f7d5eec-3791-44cf-a992-673eaea90f48)). Execution Time=712.2145 6f83e49c-cc03-d049-90f4-81439b542cf8

    Hi Wynn,
    I appreciate your attempt to address my concerns, but even your reply seems to ignore the fact that I have not only provided the name of the ISO, but the MD5 checksum of the ISO as well. Also this is the first time I am being asked to double-check the version
    of SSRS. The first reply I got to my query simply disregarded the version mismatch.
    As per your request, I have checked under the folder you have specified (C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\WebServices\LogFiles), but unfortunately there are no files under this folder in neither of my two application
    servers.
    We only have logfiles under C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS 
    Is there a way I can turn those logs on?
    In the meantime, we run the SQL Server Discovery tool and I have attached the summary for you to see that it finds the Enterprise Edition of SQL Server:
    Final result: Passed
    Exit code (Decimal): 0
    Start time: 2015-01-29 15:17:44
    End time: 2015-01-29 15:17:56
    Requested action: RunDiscovery
    Machine Properties:
    Machine name: SP-AP-02
    Machine processor count: 4
    OS version: Future Windows Version
    OS service pack:
    OS region: United States
    OS language: English (United States)
    OS architecture: x64
    Process architecture: 64 Bit
    OS clustered: No
    Product features discovered:
    Product Instance Instance ID Feature Language Edition Version Clustered Configured
    SQL Server 2012 Management Tools - Basic 1033 Enterprise Edition 11.2.5058.0 No Yes
    SQL Server 2012 Reporting Services - SharePoint 11.2.5058.0 No Yes
    Package properties:
    Description: Microsoft SQL Server 2012
    ProductName: SQL Server 2012
    Type: RTM
    Version: 11
    SPLevel: 0
    Installation edition:
    User Input Settings:
    ACTION: RunDiscovery
    CONFIGURATIONFILE:
    ENU: true
    HELP: false
    IACCEPTSQLSERVERLICENSETERMS: false
    INDICATEPROGRESS: false
    QUIET: false
    QUIETSIMPLE: false
    UIMODE: Normal
    X86: false
    Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150129_151743\ConfigurationFile.ini
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file: The rule result report file is not available.
    The \Setup Bootstrap\Log folder also has several log files that indicates the version of SQL Server that has been installed. For instance here is an entry of the Detail.txt file:
    (01) 2015-01-28 19:10:27 Slp: -- SkuPublicConfigObject : CreateSKUCookie succeeded, new checksum is 195 bytes.
    (01) 2015-01-28 19:10:27 Slp: -- SkuPublicConfigObject : Updated skuCheckSumInfo -> daysLeft=0 sqlEdition='ENTERPRISE' (0x6B9471A8) fileTimeInstalled=0 timeBombValue=0 editionType='Enterprise Edition' edition='Enterprise Edition' writeEditionStrings='True' checkSum=195bytes
    (01) 2015-01-28 19:10:27 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    I hope this help while we don't have any logfiles in the folder you asked me to look into. Please advise me as in how to proceed if logfiles must be generated.
    Regards,
    P.

  • "error: thread-local storage not supported for this target"

    I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
    I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
    Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
    Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
    Thread model: posix
    gcc version 3.4.4
    /opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /opt/gcc/3.4.4/include
    /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
    /usr/include
    End of search list.
    GNU C version 3.4.4 (sparc-sun-solaris2.8)
            compiled by GNU C version 3.4.4.
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    func_stack.c:16: error: thread-local storage not supported for this target
    func_stack.c:17: error: thread-local storage not supported for this target
    func_stack.c:19: error: thread-local storage not supported for this target
    xs@gamera% gcc -v -D_REENTRANT  -c -o func_stack.o func_stack.c
    Using built-in specs.
    Target: sparc-sun-solaris2.9
    Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    /pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
    ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
    ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
    /usr/sfw/include
    /usr/include
    End of search list.
    GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
            compiled by GNU C version 4.0.4 (gccfss).
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    func_stack.c:16: error: thread-local storage not supported for this target
    func_stack.c:17: error: thread-local storage not supported for this target
    func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
    Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
    Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
    Thread model: posix
    gcc version 3.4.4
    /opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /opt/gcc/3.4.4/include
    /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
    /usr/include
    End of search list.
    GNU C version 3.4.4 (sparc-sun-solaris2.8)
            compiled by GNU C version 3.4.4.
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    /usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
    /usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
    I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
    If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
    As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
    xz@gamera% cc -V -# -D_REENTRANT  -c -o func_stack.o func_stack.c
    cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
    ### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
    ###     command line files and options (expanded):
    ### -c -D_REENTRANT  -V func_stack.c -o func_stack.o
    /pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT  -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT  -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
    acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

    Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
    Using built-in specs.
    Target: sparc-sun-solaris2.9
    Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    /pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
    ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
    ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
    /usr/sfw/include
    /usr/include
    End of search list.
    GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
            compiled by GNU C version 4.0.4 (gccfss).
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    /pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
    /pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

  • HT1476 Charging is not supported by this accessory?

    I'm really frustrated because I have tried every possibly way to fix my iPod Touch fourth generation. There are two things wrong with it and I have already purchased things to fix them- a home button and a new charger. I am not sure this new charger will work because my sister just got an iPod with a new charger. I tried that on my iPod and it did not work. It shows the bolt with the red connector thing (iPod is off) but it does not turn on after being connected for 20 minutes.
    I don't know what to do. I've already spent over $50 to buy things to repair it, so I don't want to spend more money on Apple. I don't have any protection plan for it. I've only had it since April 2011. Anyone know a fix I'm not trying? Thanks!
    P.S.: It turned on once, but displayed the message "charging is not supported by this accessory." I have used four of our different USB cables with no luck. When I plugged my iPod in when it was on, iTunes came up but it did not sync or charge. Please help!!!
    I have the most recent version and I do not think restoring will fix it...

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • HELP!!! "Charging is not supported with this accessory" suddenly happening CONSTANTLY with iphone 4

    Suddenly without warning my IPhone 4 has been giving me a "charging is not supported with this accessory error" every time I plug it into ANY charging device.  That means my car charger, USB to the PC... USB to a macbook pro... Directly to the wall with the included charger, etc.  It doesn't matter.  I guess I'm past the 1 year warranty so Apple is not any help.  Essentially I'm supposed to accept that my $200 (with a contract) phone has a 1 year life span and that I should be completely fine with it becoming useless out of nowhere.  Here's some facts.
    #1 - It has nothing to do with 3rd party accessories.  One day it was working... one day it wasn't. 
    #2 - I cleaned lint out of the charging port on the phone.  That was the first thing I tried. I used compressed air to blow it out, I used a soft bristle tooth brush...  It's lint free.  It has nothing to do with lint.  I understand this is the most likely cause of the problem.
    #3 - When I plug it into a PC or macbook via USB, I'm able to access the IPhone 4 like I ALWAYS have.  In other words, I can see pictures, I can back up the phone, I can restore the phone, I can transfer music, sync, etc.  So this would presumably rule out the idea that it's the dock connector, right?  Why would USB work, but the charging function will NOT work?
    #4 - On that note, I was able to update the software to the latest version 5.1.1.  That was one of the first things I tried.  No dice.  I still get the "charging not supported with this accessory" error literally every time I plug it in with a yellow triangle icon... Seen here for example: http://tapatalk.com/mu/4c5f44af-af20-d86c.jpg .
    #5 - So since it's not charging, the phone inevitably dies.  Here's the weird part... if I leave it plugged into the wall/pc/mac/car when it's dead... eventually it will charge enough to turn back on.  But once it's back on... that **** error will pop back up, it will stop charging... and inevitably die again.  So then... that would suggest that it actually IS capable of taking a charge... it's just that something in the software is preventing it from charging when the software is active, no?  Am I off base here?
    #6 - So I decided I'd take it to the genius bar to have them look at it.  Right before I did that, I got the brilliant idea to try using an alcohol swab on the dock connector just to make sure it was super duper extra clean.  Oddly enough, it suddenly started working without the error.  It was working on every charger I tried.  Wow.  I thought I had fixed it.  A day later it started happening again, though.  Bizarre.  I've tried the alcohol swab thing again and it didn't make a difference... maybe it was just a fluke.... the one day I take it to the Apple genius bar and it works.  Go figure, right? 
    #7 - The only helpful thing the tech at the Apple Genius Bar was able to tell me was that the phone did NOT have any kind of water damage.  That rules that out.  No water damage in the charging dock OR the headphone jack.  So there's that.
    #8 - Since it's no longer under warranty... I took it upon myself to buy a replacement battery via Amazon.com and installed it myself.  Didn't make a difference... still the same error.  
    What, if anything, can I try?  Could it really be the dock connector?  Should I try replacing the dock connector?  Is there any software-related thing I can try?  Has this happened to anyone else?   Apple has essentially told me it's my problem.  From my perspective... any product that randomly stops working a little over a year is a faulty product.  I'm not pleased at all.

    Tried at least 6 different cables.  It isn't the cable.  All of them worked one day... then stopped working the next day.  My girlfriend has an identical Iphone 4 and all of the cables still work for her. 
    Interesting point on the data and power using different pins.  So your suggestion would be to replace the dock connector?  Found this on Amazon: http://www.amazon.com/Apple-iPhone-dock-connector-cable/dp/B003UGVOO2/ref=sr_1_1 ?ie=UTF8&qid=1338277549&sr=8-1 ... and found a tutorial online:  http://www.ifixit.com/Guide/Installing-iPhone-4-Dock-Connector/3147/1#.T8SG_sXWu -o  ... Sounds like that might be my best bet here.
    It's just odd to me that the phone gives me that error and refuses to charge... then inevitably dies.  But once the phone is dead, it starts charging enough to actually turn back on.  Isn't that slightly odd? 

  • Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2

    I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer

    Hi,
    According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
    does not support opening this list with Windows Explorer.
    There can be multiple reasons for it.
    So, I recommend you can check with the following steps:
    Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
    Go to the “Services” of “Administrative Tools” >
    Ensure the “WebClient” service is started.
    Ensure that your computer has supported Web browser.
    Ensure that Internet Explorer is configured correctly to add
    https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
    Ensure that
    you have applied the latest updates on the system.
    For more information, you can refer to the following articles:
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • You can't open the application "..." because it is not supported on this type of Mac.

    I migrated all files from OS 10.7 to OS 10.8 through time machine. However, I always see error packages like the following if I want to run some .pkg files.
    You can't open the application "..." because it is not supported on this type of Mac.
    But when I switch to a different account, then the .pkg files can be run. Therefore, I think that there might be something wrong with my account configuration files. But I don't know which one. Does anybody which one might cause the problem and how to fix it? Thanks!

    softwater wrote:
    And both are on the same startup disk, right? Because, to be honest, it's hard to figure out how you could have this problem with both accounts on the same startup disk, so I just want to check that before we get too involved.
    Assuming that's the case, the first thing I'd do is remove all those except Dropbox from the list, then restart the mac and test for the problem. If that doesn't solve it, run this free analytical tool and post the results back here so we can see if anything stands out:
    http://www.etresoft.com/etrecheck
    I have removed these login items. But I can not restart my mac now and I will have to restart it later.
    Here is the output of etrecheck. Would you please take a look if there is anything wrong?
    Hardware Information:
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4 cores
        16 GB RAM
    Startup Items:
        CUDA - Path: /System/Library/StartupItems/CUDA
    System Software:
        OS X 10.8.2 (12C3006) - Uptime: 3 days 2:52
    Disk Information:
        APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
            disk0s1 (disk0s1) <not mounted>: 209.7 MB
            Macintosh HD (disk0s2) /: 749.3 GB (311.8 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        MATSHITADVD-R   UJ-8A8 
    USB Information:
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple, Inc. Keyboard Hub
            Logitech USB-PS/2 Optical Mouse
            Apple, Inc Apple Keyboard
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    FireWire Information:
    Kernel Extensions:
        com.eltima.ElmediaPlayer.kext    Version: 1.0
        com.bresink.driver.BRESINKx86Monitoring    Version: 8.0
        com.nvidia.CUDA    Version: 1.1.0
    Problem System Launch Daemons:
               [failed]    com.apple.emond.aslmanager.plist
               [failed]    com.apple.xprotectupdater.plist
    Problem System Launch Agents:
               [failed]    com.apple.afpstat.plist
    Launch Daemons:
               [loaded]    com.adobe.fpsaud.plist
               [loaded]    com.cisco.anyconnect.vpnagentd.plist
               [loaded]    com.eltima.ElmediaPlayer.daemon.plist
               [loaded]    com.google.keystone.daemon.plist
               [loaded]    com.timesoftware.timemachineeditor.backupd-auto.plist
               [loaded]    io.redis.server.plist
               [loaded]    org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
               [loaded]    com.adobe.CS4ServiceManager.plist
               [loaded]    com.cisco.anyconnect.gui.plist
               [loaded]    com.google.keystone.agent.plist
               [loaded]    com.Logitech.Control Center.Daemon.plist
               [loaded]    com.nvidia.CUDASoftwareUpdate.plist
               [loaded]    org.macosforge.xquartz.startx.plist
    User Launch Agents:
               [loaded]    com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
               [loaded]    com.akamai.single-user-client.plist
               [failed]    [email protected]
               [loaded]    org.apache.couchdb.plist
    User Login Items:
        Citations
        Dropbox
        Xmarks for Safari
        VNC Viewer
    3rd Party Preference Panes:
        Akamai NetSession Preferences
        CUDA Preferences
        DivX
        Flash Player
        FunctionFlip
        Logitech Control Center
        NuFile
        SwitchResX
        TeXDistPrefPane
        Xmarks for Safari
    Internet Plug-ins:
        AdobePDFViewer.plugin
        DivXBrowserPlugin.plugin
        Flash Player.plugin
        FlashPlayer-10.6.plugin
        Google Earth Web Plug-in.plugin
        googletalkbrowserplugin.plugin
        iPhotoPhotocast.plugin
        JavaAppletPlugin.plugin
        NPDjVu.plugin
        PrintDialogExt.plugin
        npgtpo3dautoplugin.plugin
        OfficeLiveBrowserPlugin.plugin
        QuickTime Plugin.plugin
        RealPlayer Plugin.plugin
        Silverlight.plugin
    User Internet Plug-ins:
    Bad Fonts:
        None
    Top Processes:
        11.1  %    WindowServer
        1.4   %    EtreCheck
        0.3   %    vncviewer
        0.1   %    beam.smp
        0.1   %    ps
        0.1   %    JavaApplicationStub
        0.0   %    Cisco
        0.0   %    CoreServicesUIAgent
        0.0   %    Dictionary
        0.0   %    AdobeAcrobat

  • Web Deploy error - "This method is not supported by this class"

    I have an MVC project which I am trying to deploy to one of our internally-hosted web front end servers via a TFS build process. Our server hosts the MS Deploy service, and other solutions deploy without problems to the same box. The parameters for the build
    process are as follows:
    /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:MSDeployPublishMethod=WMSVC /p:MsDeployServiceUrl=https://<server>:8172/msdeploy.axd /p:DeployIISAppPath="<internal.site.com>" /p:username=<username> /p:password=<password>
    /p:IncludeIisSettingsOnPublish=false /p:AllowUntrustedCertificate=True /p:OutputPath=bin\ /p:SkipExtraFilesOnServer=True /p:VisualStudioVersion=11.0
    The error message I receive at the point the build reaches the deployment activity is:
    Web deployment task failed. (Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.)
    Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.
    The request was aborted: The request was canceled.
    This method is not supported by this class.
    We've found
    this StackOverflow post which describes the same error we're experiencing, however the suggested solution is something we already do in our server configuration, so this doesn't resolve the issue for us.
    Has anyone seen this error before, or is able to make any suggestions why it is happening?

    Hi Matt,
    You have to have a look in the build log then copy the command that is under Run MSBuild node and executed it on the build agent.
    You should find something like below:
    C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe /nologo /noconsolelogger "C:\Builds\....sln" /nr:False /fl /flp:"logfile=C:\Builds\...log;encoding=Unicode;verbosity=normal" /p:SkipInvalidConfigurations=true /p:CreatePackageOnPublish=true /p:DeployOnBuild=true /p:SkipExtraFilesOnServer=True /m /p:OutDir="C:\Builds\...\bin\\" /p:Configuration="DEV" /p:Platform="Any CPU" /p:VCBuildOverride="C:\Builds\....sln.Any CPU.DEV.vsprops" /dl:WorkflowCentralLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;BuildUri=vstfs:///Build/Build/31630;IgnoreDuplicateProjects=False;InformationNodeId=14;TargetsNotLogged=GetNativeManifest,GetCopyToOutputDirectoryItems,GetTargetPath;LogProjectNodes=True;LogWarnings=True;TFSUrl=http://...-tfs:8080/tfs/...;"*WorkflowForwardingLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;" /p:BuildId="aa2d3857-27e9-4854-b44f-4ca625ccd786,vstfs:///Build/Build/31630" /p:BuildLabel="..._2015.02.27.2" /p:BuildTimestamp="Fri, 27 Feb 2015 11:16:41 GMT" /p:BuildDefinition="..."
    Daniel

Maybe you are looking for