CSS trouble (disk full without useful file)

Hi all,
i've got problem with CSS 11150 SW Version: 5.00 Build 63, so i can try to upgrade OS of CSS but after 3 timeout in uploading the disk was full with a part of the OS (i've tried 3 times...). SO now i have not idea about how can i clean the disk...i'm sure i've got a lots useless file but i don't know how see and erase them. How you can see (see below) just one uncompressed OS is present on the system....may you help me?
THK a lot
cssA# show disk
Disk Size: 216 MB
Disk Free: 2 MB
Bad Cluster Count: 0
File Count: 648
Directory Count: 103
cssA# show installed-software
ap0500063

type 'llama' to enter debug mode.
FRom there do 'ap_file delete c:/?' and delete the 3 tmp files you should see there.
Gilles.

Similar Messages

HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared.

Upload file without using file upload UI Element

Hi all.
I need upload a .txt file without using file upload UI Element because filename is not insert by user. The filename is generated by program. I try to use 'GUI_UPLOAD' and 'WS_UPLOAD' but don't work.
Many thanks in advance.

As you correctly pointed out we cannot use the gui_upload and gui_download fm's in webdynpro because they require sap gui and WD Components generally run in a HTML or Portal environment.
The only option available is File Upload Element

My computer is saying start up disk full, erase some files.

Hello I'm looking for help to fix my disk full problems. I want to use an external hd. but not in the time machine way, which as i understand erases older things. I want what I put on there to stay there.
Can anyone tell me how to check where the disk use is heavies so i can erase that part. Any help with managing disk space would be much appreciated.

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Can I partition a drive in Disk Utility without erasing files?

Hello,
According to the third screenshot, I have the option of partitioning an external drive without losing files already on it, but when I try to do so, I only get a message indicating that it will erase the disk: http://osxdaily.com/2009/11/20/resize-partitions-in-mac-os-x-with-disk-utility/
I backuped my internal drive with Time Machine and I would now like to partition it so that only one half is for Time Machine purposes. If it's possible to do that without starting from scratch, if I decide later to eliminate that partition, would that require losing any files?
Thanks.

You may find your answer here. Have a look around.
http://pondini.org/OSX/DU.html

I want to create a sign on PW without using file vault

I have an MPB and I want to have the screen and computer secured via a logon PW, but I don't want to use file vault.
It has been a while and I have my password that allows me install software and make changes etc.
How do I make that same PW to be the PW every time I start up or wake up the computer?

Disable Automatic Login under System preferences, Accounts, Options
You will then have to enter your password on the login screen to unlock everything
To easily lock the screen with a single mouse click, open Keychain Access, then choose preferences and click "show state in the menu bar"
You will then see a lock appearing in the upper right corner of the menu bar.
Clicking it will reveal a menu with a lock screen option
Hope that helps

[10g - XE] Why is my disk full of trace files?

Just in case there's another silly person like me out there who encounters this problem...
I have XE 10g installed on my local machine (Windows XP), as my own personal test environment.
My computer was acting really weird yesterday, then today I got an error while using Excel that my disk was full.... and after some investigating, I discovered that I have 39 GB (gasp!) of trace files! These are all located in the directory C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\trace
...and some of them are quite large (obviously, since I have 39 GB of them...); one of them by itself is 2 GB.
Almost all of the files are named like: sqlnet_trace.txt_3132_1.trc And, for example, I already have 5 trace files from today, totaling 15 MB.
I vaguely recalled setting my trace level to 16 or SUPPORT a LONG time ago, and funny thing, I couldn't remember changing it back to OFF.
So, if you've been silly like me, check your sqlnet.ora file, and set TRACE_LEVEL_CLIENT=OFF

Thanks for the tip. I checked listener.ora, and it doesn't appear that any trace files are enabled there. I don't know what Net manager is.
At least in this case, the server/database is just my personal PC, so the only person it impacted was me. It took 7 months for the trace files to grow to that size with just me using the database, so I can only imagine what it would do to a database in an actual environment.

MacBookAir Disk Full - but my files aren't that big...

I have the 128MB MacBookAir which i recently bought whilst in the US, it is the most recent hardware and came with Lion installed originally. Now, some 2 months on I find the hard drive is full, however my documents etc aren't that big:
     Audio 14.5 GB
     Movies 10 GB
     Photos 3.5 GB
     Apps 6 GB
     Other 85 GB
Clearly this "Other" is the problem. Looking through Finder at "All my Files" I have around 30 documents etc ranging between 40KB to a max of 6MB, so I really don't know what this "Other" consists of. I can't find it to delete it, but it is getting in the way of my MacBookAir functionning properly; I have insufficient room to download updates.
Can anyone help?

i had the same problem with my 128GB hard disk MacBook Air too. I used Finder to identify that it's my Users folder that contained invisible folders or files excessive in sizes. They accounted for some 80GB of the hard disk while the sizes of files in viewable folders totaled less than 6GB (including music and photo files). The culprit folders and files must have been hidden within the Users folder, I concluded.
I downloaded TinkerTool successfully - be sure to download the corrrect version to match your Mac OS X version - and in thet General tab, I selected "Show hidden and system files", then I selected "Relaunch Finder" and using the relaunched Finder I was able to see a hugh hidden folder named "Library" within my Users folder. Probing further, I discovered hugh back up files in a "Back Up" folder within an "Application Support" folder inside the "Library" folder. The back up files numbered in the ten thousands, had cryptic file names, but were viewable by opening them with Textedit. I decided I don't need them and trashed the "Back Up" folder files to recover 70+GB.
I read from TinkerTool FAQ that the Mac OS X originated from NeXT so many of the advanced file management features have been "deactivated" for the general user migrating up to OS X from the previous Mac OS. The simplicity, cleaniness, and user friendliness have been retained. It thus takes the use of tools like TinkerTool to accomplish additional tasks at times.
Thanks all for the TinkerTool tips above! Just to share my own success story.

Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
Clinton

After effects error: rendering error while writing to file. Disk full.

Hi,
I tried to render a video in AE CC 2014, with RGB + Alpha as I wanted to keep the background transparent (rotoscoped) so that I can then use it in Premiere.
I chose to export in Quicktime, with uncompressed 8bit.
After it rendered it for a little while I had a window pop-up saying
After effects error: rendering error while writing to file "E:...blabla". Disk full. The file may be damaged or corrupted. (-1610153463).
I read a thread posted in the forums but i do not understand the solution provided there.. What is a POD??
I have a Win7 Ultimate, x64. Plenty of disk space, and 16 Go ram.
Please help, I canoot go further in my project with this bug...
Jaywaii

Is the drive you are rendering to formatted FAT32 by any chance? If so you can only render up to 4Gb for one file. Try rendering out a TIFF sequence instead. Litte tip - push the LZW compression tickbox in format options for a lossless compression, this will keep you file size way down.

Why asm startwith with + sign? what happen add file in asm tablespace without using + sign,please explain with error no.

Hi folks,
I have one query why asm startwith with + sign? what happen add datafile file in table space,or add disk in disk group without using + sign ,please explain with error no.

hello,
+ sign is to indicate the diskgroup you intended to place datafile. this apply to all database files.
without + sign,will be place in ORACLE_HOME/dbs directory. there will be NO error.
see example here: without using +
SQL> create tablespace test45 datafile 'temdg' size 10m;
Tablespace created.
SQL> select name from v$datafile;
NAME
/u01/app/oracle/product/11.2.0/dbhome_1/dbs/temdg
7 rows selected.
second example: with using + sign to specify diskgroup
SQL> create tablespace test55 datafile '+temdg' size 10m;
Tablespace created.
SQL> select name from v$datafile;
NAME
/u01/app/oracle/product/11.2.0/dbhome_1/dbs/temdg
+TEMDG/orcl/datafile/test55.261.844200359
8 rows selected.
HTH
Tobi
Tobi&#39;s Oracle DBA &amp; UNIX Blog

After Effects Disk Full error (-1610153463) when rendering to QTs

Hi! I'm having a very weird error on most of my computers when rendering to our shared storage,
After Effects error: Rendering error while writing to file "E:\xxx.mov". Disk Full. The file may be damaged or corrupted. (-1601053463)
All the machines in here can access the same media and storage volumes, they are mounted as NTFS volumes fron an iSCSI storage called DDP. All this was working fine until about 2 weeks ago, nothing was updated or upgraded on the storage.
Weird this is this do not fail if the render to the same location is done in AVI format, or with certain QT codecs.
NON codec fails immediately, writes a QT that is about 8 MB in size and fails.
DNXHD writes about 1 second of frames and fails.
BMP codec fails too.
but...
all those codecs render fine if I render to my desktop or to my D drive that is also a local drive inside of the computer, NTFS formatted too. So the codes mys be fine.
I can not discard ad storage issue, but like I said before, it ONLY fails if I use QT and some codecs, PhotoJPG for example does not fail, space, I have plenty.... and, this only happens from the windows computers, the MAC does not fail.
I'll keep testing stuff and will post what I find.... but if anyone have any suggestions or ideas.... are very welcome...

wonder if you read my previous post answering to myself?
It is actually not a network drive, is is a NFTS drive mounted over iSCSI, its not a NFS volume. Workd fine for over a year, until last Windows Defender update... and it is actually fasted than my local drives since the local drives are simple SATA drives and this is a 48 Drives RAID connected over 10 GigE iSCSI and with a performance of 1050 MB/s.
Even our projects are saved on these iSCSI volumes, so all the rooms we have can work from the same project without having to duplicate media or projects between rooms, so producers can jump from room to room with the projects if the artist is bussy with something else and they need changes, someone else can take care of it...

ERR: EXCEPTION_DURING_EXECUTE while using FILE CONTENT CONVERSION

Hi,
I'm trying a file to file scenario with File Content Conversion for Sender communication channel. But am getting the following error in SXMB_MONI
<SAP:Category>Application</SAP:Category>
<SAP:Code area=<b>"MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code> </b>
<SAP:P1>com/sap/xi/tf/_MM_ContentBased_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_ContentBased_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I tried the same message mapping for normal file to file scenario without using File Content Conversion. It went through fine.
<b>Our file structure follows</b>
    <Header>
      <Sysnum>01</Sysnum>
   </Header>
   <Body>
      <Name>ABCDE</Name>
      <Age>25</Age>
      <Stream>XYZ</Stream>
   </Body>
<b>The Sender Communication Channel Parameters follows:
</b>
Recordset Str: Header,1,Body,1
Header.fieldFixedLengths : 2
Header.fieldNames : Sysnum
Body.fieldFixedLengths : 5,2,3
Body.fieldNames : Name,Age,Stream
ignoreRecordsetName : true
Looking for a solution
Thanks,
Ajay.

Hi Ajay,
your message mapping failed.
Copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
Regards,
Udo

I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....

What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

What is the best way to find a file on the servers disk without using web.xml?

          What is the best way to find a file on the servers disk without using web.xml?
          I want to find a configuration file not contained within the war file I have
          created. Is there a way to pass information into the ServletContext with out
          rebuilding the ear or war files? Tomcat 4.0 can do this in its server configuration
          files. Does BEA have the equivalent?
          Regards,
          Eric


You can specify the path to the file as a system property
          eg
          java -Dconfig.file.location=./mydirecotry/myfile.txt com.test.MyApp
          "Eric White" <[email protected]> wrote in message
          news:[email protected]..
          >
          > What is the best way to find a file on the servers disk without using
          web.xml?
          > I want to find a configuration file not contained within the war file I
          have
          > created. Is there a way to pass information into the ServletContext with
          out
          > rebuilding the ear or war files? Tomcat 4.0 can do this in its server
          configuration
          > files. Does BEA have the equivalent?
          >
          > Regards,
          > Eric

CSS trouble (disk full without useful file)

Similar Messages

Maybe you are looking for