CSV file not appear as a CSV file in attach

Hi.
I am sending an CSV file as an attach in an email. But the problem is that it appears as a PDF file, even though in SOST it appears as a CVS file. Does anyone faced this problem?
Thanks.

Well, I when I look at this method, I see Attachment_type is of type SOODK-OBJTP.  When I forward navigate into that, I see structure SOODK, with field name OBJTP, type SO_OBJ_TP.  Forward navigating again, I see that that field has domain SO_OBJ_TP.  When I look at the value range for the domain, I find table TSOTD.  Inside that table, I don't find 'csv' as a  type.  This leads me to believe that SAP doesn't know what type of attachment it has.  Since your code implies a hex/binary file, perhaps BIN is the replacement for CSV, and the file name should probably contain '.csv'.  Sorry, it's been a while since I wrote a email with attachment;  I don't remember what I used in prior programs, I believe is used BIN or RAW.
The choices are listed below:
ALI                        X          X      ABAP list document      
ARC                        X                 Archive object (image)  
BCS                                   X      External Document Storage
BIN                        X                 Binary document         
DLI                        X                 Distribution list       
EXT                        X    X            PC document             
FOL                        X                 Folder                  
GRA                        X          X      SAP Business Graphics   
OBJ                        X                 Business object         
OFO                                   X      Object folder           
OTF                                   X      OTF document            
R3I                                   X      IDoc                    
RAW   X                    X                 SAP editor document     
SCR                        X                 SAPscript document      
URL                                          Link to Internet/Intranet
WIM                                   X      Work item               
XXL                        X          X      Document for list viewer

Similar Messages

  • Why do certain Pages and Numbers files not appear in All My Files

    I don't know if this is associated with Yosemite or not.  But some time ago, I noticed files I use a lot no longer show up in All My Files in Finder.  Whenever I want to open them I have to find them in Finder because they are no longer showing up as a recent file.
    Any ideas why?  I can't find any settings that seem to influence this.
    TIA

    Recent builds of iTunes seem to have an occasional problem where the main music section doesn't always list all the music that has been added to the library. Create a smart playlist with the name of one of the albums and you should find that the media is actually present. Often adding some more media seems to fix things. Downloading the iTunes Free Single of the Week has a good success rate.
    Alternatively you could try closing iTunes, then removing the hidden file sentinel from inside the main iTunes folder and restarting. This will cause iTunes to run a consistency check on the database which should sort out any anomalies.
    BTW I had a clue from another thread that the "missing" tracks might be listed in the Unknown Artist/Unknown Album area at the bottom of the listings. Would you mind taking a look to see if you see the same?
    tt2

  • MiniTOC does not appear in translated source file

    RoboHelp 8.0.2
    WebHelp Output
    I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
    The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
    The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
    I have no clue how to resolve this issue. Sample code and screens are listed below.
    Donna
    English Source
    <h1><a name="Top"></a>Working with Web Ordering</h1>
    <p&gt;This topic explains how to generate and maintain NAPA and Factory orders.
    (Special orders and Non NAPA orders will be available in a future release).
    You perform these tasks on the <span style="font-weight: bold;">Order
    Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
    Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
    &gt; Web Ordering</span&gt; from TAMS II BackOffice.</p&gt;
    <p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
    </span&gt;<span&gt;topic</span&gt; for instructions on common functionality such
    as sorting data.</p&gt;
    <?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
    list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
    margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
    <p&gt;&#160;</p&gt;
    <h2>Adding a New Order</h2>
    <p&gt;Follow these instructions to create a new purchase order:</p&gt;
    French Source
    h1&gt;<a name="Top"&gt;</a&gt;Utiliser le module de commande en ligne</h1&gt;
    <p&gt;Cette rubrique explique comment créer et gérer des commandes NAPA et
    d'envoi direct. (Les commandes spéciales seront disponibles dans une version
    future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;"&gt;Gestion
    des commandes</span&gt;. Cette rubrique suppose que l'utilisateur est connecté
    et que la <span style="font-weight: bold;"&gt;Gestion des commandes</span&gt;
    a été lancée à partir de la page de renvoi de TAMS&#160;II. </p&gt;
    <p&gt;Voir&#160;: La rubrique <span style="font-weight: bold;"&gt;Survol de l'interface
    Web de TAMS&#160;II</span&gt; pour des instructions sur les fonctions courantes
    comme le tri des données.</p&gt;
    <h2&gt;Ajouter une nouvelle commande</h2&gt;
    <p&gt;Suivre les instructions ci-dessous pour créer un nouveau bon de commande&#160;:</p&gt;

    The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • Scroll bar does not appear in some PDF files. How can I enable it?

    Scroll bar does not appear in some PDF files. How can I enable it?

    Scroll bars are supposed to appear when needed.
    For example, scroll bars will appear when you zoom in on a page.
    FAQ: How to zoom in/out on a page
    Windows 8 automatically hides scroll bars after a few seconds of inactivity.  Scroll bars will reappear when you touch the screen and move your finger (on a Touch-enabled device) or move your mouse.
    Additionally, page navigation depends on the view mode (Single Page vs. Continuous Page).
    In the Single Page mode, you can swipe left/right (horizontally) or click the left/right arrow button with your mouse to go to the previous/next page.
    In the Continuous Page mode, you can swipe or scroll up/down (vertically) to go to the previous/next page.

  • FTP publishing on iWeb to replace existing site - files not appearing.

    On iWeb, I used FTP publishing to replace my existing site files, then deleted the original files but not only has the new site files not appeared in my public html folder but I get the message:The requested URL /www.geofflevitus.com was not found on this server.
    Additionally, a 404 Not Founderror was encountered while trying to use an ErrorDocument to handle the request.

    but I get the message:The requested URL /www.geofflevitus.com was not found on this server.
    That's an indication that the index.html file that is created alongside the site folder by iWeb is missing. 
    Try publishing your site to a folder on your hard driive and use a 3rd part ftp client like the free  Cyberduck to upload the site folder and the index.html file.
    Cyberduck or Transmit will let you view your server folder in a Finder like window where you can see which files are missing.
    OT

  • Russian text not appearing correctly in excel file while needs to be mailed

    Hi all,
               I am sending vendor data to each vendor to their email id through excel files in a report. This report does not display any of this data.
    For this iam using the FM. SO_DOCUMENT_SEND_API1. The excel sheet consists of Russian text. This Russian text is not appearing properly in the excel sheets sent through mail. Some weird characters are appearing instead of the Russian text.
    I tried using "Translate" but its invain. I also tried to generate the report by logging into the system in Russian still i could not get proper text.
    Kindly help me in resolving this.
    << Moderator message - Please do not promise rewards. >>
    Thanks and Regards,
    Venu.
    Edited by: Rob Burbank on Nov 17, 2011 12:22 PM

    Hi
    You mean to say that the table you have queried doesnt have a column called last_update_login right ? If its the case then what you did for debugging the error. Pls share it since i was also struggling with *<<<< needs to be declared abstract; it does not define the method setLastUpdateLogin() ..>>>*
    error.
    Thanks.
    Praveen

  • Backup device file not appearing in iTunes Device Preferences

    While performing 1st time backup for my iPad to iTunes MacBook, the process was interrupted halfway through. As such, I deleted the registered backup file from iTunes Devices Preferences/device/device backup and attempted to reinitiate the backup process. I have to restart MacBook because the iTunes File/Devices turns grey and I am not able to click on it. Restarting gets me to inititiate the back up and transfer purchase. The problem now the device name is not appearing at iTunes Devices Preferences/device/device backup. I am not sure if the backup is successful/complete and if so where is the files? How do I make the file appear so I can transfer the data / apps to my new ipad air via iTunes. Pls help...

    Device not detected in iTunes for Windows

  • IMSS Min Normalized Measure not appearing in imsmanifest.xml file

    Hello,
    The IMSS Min Normalized Measure line is not appearing in my imsmanifest.xml file. It used to, but since I upgraded to Captivate 5.5, I don't see it anymore. I have thoroughly checked my settings:
    Reporting is enabled
    SCORM 2004/Manifest/Default is selected
    Report Status: Pass/Fail
    Report to LMS as: Percent
    Report Data: Quiz Results and Slide Views
    Reporting Level: Interactions and score
    Did Captivate 5.5 fix it so we don't have to add the minimum score into the zip file anymore? If not, how do I correct this so the line shows up?
    Thanks,
    Barb

    Hi Melody,
    What I've been told by Adobe is that Captivate 5.5 produces a different looking manifest file than previous versions of Captivate.  For our LMS (Knowlagent), we require this line of coding so that we can manually input the minimum passing grade in a course.
    Adobe said I could try to edit the default SCORM template to suit our LMS, but our LMS said it wasn't possible.
    So instead, our LMS told us that if we adjusted the line of coding in each manifest file, it would work. And it has (it's just a little extra work each time you publish).
    This is what you need to do:
    Find the below block of code in your imsmanifest.xml file and change the value for satisfiedByMeasure from false (default) to true.  Once that line is changed, in the same block of code paste in the minNormalizedMeasure line that was present in the file previously (both settings are highlighted below).  The .80 is what we chose as our minimum passing grade (80%) but you can change that number to whatever you want.
                                                                <imsss:sequencing>
                                                                                    <imsss:objectives>
                                                                                                         <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="true">
                                                                                                                             <imsss:minNormalizedMeasure>.80</imsss:minNormalizedMeasure>
                                                                                                         </imsss:primaryObjective>
                                                                                    </imsss:objectives>
    Hope that helps! Are you using Captivate 5.5 too? Which LMS are you using?
    Thanks,
    Barb

  • RSC Files Not Appearing in RH Project Manager

    My three-writer group has experienced a number of RoboHelp/RoboSource Control problems in the last week.
    First this is our setup:
    1. Two writers with 64-bit Windows 7, and one with 32-bit Win 7. We all have the latest patches and updates.
    2. Our RSC database is on a remote machine that has 32-bit Win XP.
    After a time where our group successfully updated our project, I was given a new laptop with Win 7 (I had previously had a 32-bit Win XP desktop), we have now encountered the following problems:
    1. No one can open a RH project from version control. We go through all steps and when we open the XPJ icon it finally crashes after taskbar status messages of something like "Querying version control." It thus crashes at one of the final steps in opening a project from the database.
    2. Even on our remote machine, I cannot open a RH project from version control.
    3. For some unknown period of time, it appears that the three of us have not had our changes uploading to the database because nobody's desktop RH project looks the same. Out of the three of us, I have many--but not all--of my changes up at RSC. I have no idea where my colleagues' changes went.
    4. An unspecified number of files are listed in RSC as well in the File Status pod in RH but they are NOT appearing in the Project Manager pod. If I try to move one image file with the same name into a folder where the original should be, RH displays an error message saying that it already exists there--even though I cannot see it in Project Manager nor interface with it.
    I have used RH for 11 years but RSC for just 1-2. I have never seen behavior like this before and it's really brought our entire OLH efforts to a halt. Can anyone tell me what I might do to restore, if not the database, a version of the XPJ that has as many of our changes that DID make it to RSC?
    Thank You,
    Chris
    Varian Medical Systems

    I have amended the title of the thread for the simple reason that I don't do source control. I guess you've just added another reason why.
    Sorry but I cannot help you on this one.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • UME LDAP Data - XML file not appearing

    Hi,
    I have configured the readonly ADS with DB for the user authentication. Now I want to restore back to the default datasource configuration (dataSourceConfiguration_database_only.xml). But in the dropdown box in the Configtool >> UME LDAP data under the "Directory Security" tab, I am not able see the config XML file for the DB only. I tried uploading the file, but its saying file already exists. After this I tried deleting the fils from the cluster_data\server\persistent\com.sap.security.core.ume.service and then uplaoded the XML file. Still this is not appearing in the List of Datasources available.
    Can you please let me know how shall I revert the Datasouce to DB only?
    Regards,
    Debasis

    Hi,
      Go to ConfigTool -> Global Server Configuration -> Services -> com.sap.security.core.ume.service.
    You can change the value of ume.persistence.data_source_configuration to dataSourceConfiguration_database_only.xml.
    Regards,
    Siva
    P.S: Award points if you find this useful.

  • File not appeared in Application server

    hello gurus
    iam new to SAP
    Iam doing excersice MD (Attributes ,text,hierarchies) loading through PROCESS CHAIN, while iam loading data by infopackage under schedule tab i had given file name which is saved in Application server,but in preview it shows File not found (for text) and hierarchy also same problem,so pls clear my thread any one....!

    Hi,
    Check  the proper authorizations are there or not?. in SU53. Check you are opening structure file or Data File?. Ask Basis team to check the file from backend using command promt, give path and ask them. You create your own Folder in AL11 and try to save the files in that folder only because it is easy to track and maintenance.
    Thanks
    Reddy

  • Imported files not appearing in multitrack view

    I'm using Audition 3.0.
    Someone else used my computer and I believe they changed a default setting.  When I import an audio file it only opens in the edit view. When I try to import into the multitrack view the file doesn't appear in the file panel (but it does open in edit view).  Is there a setting to open in multitrack view as the default? I can't figure out why the file(s) don't appear in the multitrack file panel.
    Thanks!

    Thanks for your reply.
    1. Yes, I am on a Mac using the latest operating system 10.7.4 (Lion).  I'm using a less than 2 year old iMac 27".  I have been using Dreamweaver for several years from about CS3  - before that I used Adobe GoLive.
    2. Yes, I installed the trial CS6 without any errors.  I have installed it twice now.
    3.  Yes, this is correct.  I have taken four screen shots for you to see.  The first one is one of my websites in CS 5.5.  The second is looking into the 'images' folder in CS 5.5.  The third shot is the same as the first shot but as seen in CS 6 and th fourth is the same as the second but as seen in CS 6.  You will see that the image files stop in the 'C's and the scroll bar is still close to the top so that nothing below the images folder will display when I scroll down beyond the bottom of the images folder.
    You can see some of the missing filenames from the second photo.  They are all jpg files in this case although html and pdf files are missing further down.
    The path to my local sites is ~user/Dropbox/Sites/sitename folder (I have three different folders for three different sites).
    1.
    2.
    3.
    4.
    I also found in the process of trying to upload these screen shots that you can't add images using Safari.  I had to use Chrome. The 'insert' button doesn't work in Safari.

  • DTW Error file not  appearing

    Hi All,
       I am working with SAP B1205B patch level 41 and DTW version 2005.0.19. The DTW is running fine but when there is any error in importing the error details is not featuring in the log files. The log files is blank. after every run. What can be the reason. Please suggest.

    hi debraj,
    Go thru SAP Note
    Note 711538 - Cannot save map rule/Cannot see the error message after imp
    Summary
    Symptom
    1. During the import : cannot save the map rule after changing it
    2. After the import cannot  see the error messages and no log file has been
    created.
    Other terms
    Data Transfer workbench, DTW, log file, error message, map rules, SAP Business One,save
    Reason and Prerequisites
    Specific Solution
    Solution
    The read only box of the dtw.mdb file have to be unchecked.
    To do so, please perform the following :
    1. Go to your data transfer workbench folder, find the dtw.mdb.
    2. Right click on the file Select properties, uncheck the read only file.
    3. Press OK
    Header Data
    Release Status: Released for Customer
    Released on: 17.07.2008  14:15:32
    Priority: Recommendations/additional info
    Category: Installation information
    Primary Component: SBO-DTW Data Transfer Workbench
    Secondary Components: SBO-SH-DTW Data Transfer Workbench
    Affected Releases
    SBO-DTW 60 6.2 6.5  
    SBO-DTW 2004 2004 2004  
    SBO-DTW 2005 2005 2005  
    SBO-DTW 2007 2007 2007
    Hope problem will be solved.
    Jeyakanthan

  • Having troubled with already purchased ringtones not appearing in the ringtone file of itunes not able to sync into iphone4 after installing ios5

    the tones show in the music library and also in the purchased section, but in the listing of tones there is nothing.  After sync with the Iphone 4 they do not appear.  So to look I selected on selected tones and it only shows 1 of 15.  How can I fixed this?  either have the ringtones back into "image of a bell" tones so they can appear on the iphone as ringtones and I can select them .

    Anyone?

Maybe you are looking for

  • Help yooja, my montion is not working in final cut 5.1

    I am new user to mac product all together. Recantly sent macbookpro for new supper drive, when my mac came back super drive works great but software has not run the same. After installing all the up dates and disc for final cut pro 5.1 I have tested

  • No data to retrieve error

    Hi , I have a Webi document with 4 queries and I merged all of them with org unit dimension.When I am refreshing this Webi document I am getting a message saying that "no data to retrieve <Query name>". When I created a new document by using same Uni

  • How do I copy Playlists to my iPod nano 3G without duplicating the songs?

    I've created a few playlists in iTunes. These are "best of" Playlists - for example 6 tracks that I really like from an album of 10 tracks. Now the entire album, in each case, is already on the iPod. When I drag the Playlist to the iPod though, it co

  • When i click on photoshop icon nothing happens

    Whenever photoshop is clicked on nothing happens, the app wont open.

  • Default Time for Clock Timer

    Every time I go to set the time on the timer on my iPhone, it's at 1:30. At one point, in the past, wasn't there something where it would stay at the previous setting? Is there a way to make it stay at the previous setting when the alarm goes off?