Ctrl +p

Any tips on how to make a PDF convert bigger/
When I ctrl+p to create a PDF (from a report generated off the web-not a MS Word doc) it comes out tiny.
I never changed any settings so to me there's no logical explanation why this is happening.
When the PDF is created you have to put it up to 200% just to read the document.
Any tips or advice to what happened and how i can fix it?
Many Thanks,
MB

No, that's not possible. But you can set up the fields to not print unless all required fields are complete. This would require some JavaScript.

Similar Messages

  • Tried installing Windows Vista, cancelled install and now it won't boot from the OEM Vista DVD, all i get is BOOTMGR is missing error... Ctrl Alt Del to restart and when i turn the computer on i get a blank screen and pressing C is not working to boot....

    Topic says it all...
    My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
    So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
    Then after like 15-20sec it will throw out a:
    BOOTMGR is missing
    Press Ctrl+Alt+Del to restart
    I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
    I have tried pressing C while booting up but it doesn't work...
    Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!

    Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
    http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
    The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
    * hold down immediately after pressing the power button and until the OS choice screen appears.
    To summarize.
    1 Use the above method to boot into Mac OS.
    2 Download the instructions and read them.
    3 Use Boot Camp Assistant to remove the partition.
    4 Pick your friends more carefully.

  • I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

    I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

    This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
    Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
    tt2

  • I need an alert message if I press ctrl shift b

    Hi All,
    I Need an alert message if I Press "ctrl+shift+b"(to make the selected text bold). Is this possible?
    Regards,
    Chinna

    Create a keyboard shortcuts (ctrl + shift + b) for your script and try...
    Code must be like this:
    alert("Bold Shortcut....");
    app.selection[0].fontStyle = "Bold";
    P.S.: you have to set conditions for bold, bold italic, etc. 
    Vandy

  • How do I open multiple locations from the History after selecting them with Ctrl+click?

    Let's say I want to read some of the Mother Jones and Alternet articles I'd linked to from e-mails over the past in two months. I open my Firefox history. I do a search of the history libary to get a list of all the relevant locations. Then I use Control+click to select the few articles I want to read. I'd think Ctrl+O would open all those selected, but it doesn't. There must be a more efficient way than what I'm doing now, which is to open a new tab in the browser window, go to history, double click one line, wait for the page to load; open a new tab, go back to the history search results, click on a new location, wait as it loads, repeat.

    Where are you viewing your History? <br />
    Have you tried the History Sidebar? {Ctrl + H} <br />
    You can {Ctrl + Click} the pages you want to open in new Tabs, one at a time. <br />
    Also, if you have your Options > Tabs pref deselected for '''When I open a new tab, switch to it immediately''', it might be less distracting with all those pages opening in the background.

  • Revolve 810 G1 Unlock Computer when in Tablet Mode. Press CTRL-ALT-DEL or Windows Security Button

    1.  I have an Revolve 810 G1
         Running Windows 7 Pro (64 Bit).
    When I change the screen to Tablet Mode
      (Folding tablet over keyboard and using as tablet).
    I lock my computer.
    2.  What to know how to unlock without having to Open back up and use the CTL-Alt-DEL keys.
    When Locked screen shows:  Press CTRL-ALT-DEL or use the Windows Security Button to unlock this computer.
    I would like to use the Windows Button on the bottom of the screen
       (One Used in Windows 8 to change between Desktop and Metro) to Unlock screen And bring up on screen keyboard to put in my password.
    This is probably how it should work, but it does not work.
    Even bringing up the onscreen keyboard via the blue power button On the screen to Ease Of Access does not work.
    The CLT-ALT-DEL on the on screen keyboard will not unlock the screen.
    P.S.
    Where is that Windows Security Button when you need it? 
    Thanks,
    Rog

    If you are using Windows 7 (not Windows 8), you should be able to touch the Ease of Access button at the lower left of the screen, then select Type without the keyboard (On-screen keyboard). When the on-screen keyboard pops-up, press CTRL, then ALT, then DEL. You should get a password prompt; the on-screen keyboard will stay visible unless and until you close it.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

  • Unable to download Additional Loops For Garageband Ctrl R Does Not Work

    I am unable to download the additonal loops for Garageband on my iMac Purchased New Spring 2013.
    I have done the following with no success:
    Uninstalled Garage Band.
    Reinstalled Garage Band from App Store.
    Reindexed Loops
    Clicked on missing loop and choose Update Now
    Clicked on missing loop and choose Update Later
    Used Ctrl+R in App store (nothing available). (Yes, I logged in with AppleID)
    Deleted Apple Loops Folder
    Deleted Apple Loops index Folder
    Re-indexed loops in Garageband
    My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
    I have also tried the terminal command: sudo softwareupdate --list
    There are NO updates available.
    Anyone have any addittional suggestions for installing the missing loops from Garageband?

    What exactly happens, when you try to download the missing loops - when you click on a missing loop and choose "Update now"?
    My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
    Are you looking in the library in your Home Folder 
    "~/Library/Audio/Apple Loops/"  , or in the System library  "/Library/Audio/Apple Loops/"  ?
    The loops should be installed in the System Library  
    "/Library/Audio/Apple Loops/".
    How did you set up your new mac? Did you migrate from an older mac using Setup Assistant or Migration Assistant? Did you migrate an earlier GarageBand installation?

  • When I click on a web link and hold down ctrl the page will not open into a new tab, it is just opening in a new window. How do I correct this?

    When I use to hold down the ctrl key and left click on a web link, the page use to open into a new tab. For some reason this is not working anymore. Instead when I hold down the ctrl key and left click on a web link, the link will open into a new window. How do I fix this?

    I figured out how to correct it. Not sure what exactly was happening. But I started into private browsing and then turned it off. It's been working correctly ever since I did private browsing.

  • Problem with JMS migration when using Ctrl+C to stop the managed server in cluster

              Hi,
              I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
              uses JMS as a asynchrous communication. We have MDB which listens to these JMS
              messages.
              If something is being processed on Managed Server 1 and while the request is in
              process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
              After this, i go to admin console and migrate teh JTA and JMS. After this, i am
              expecting other running Managed Server should restart the incomplete transaction.
              But this is not happening. The Managed Serve2 doesn't process the requst.
              But when i restart teh MAnaged SErver 1 again, it takes up the same request and
              processes it.
              Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
              Please note that the same thing is working fine when i stop the server using Admin
              console(Normal shutdown OR forced shutdown).
              Any comments in this regards are apprecciated.
              Thanks,
              Naresh
              

              Hi,
              I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
              uses JMS as a asynchrous communication. We have MDB which listens to these JMS
              messages.
              If something is being processed on Managed Server 1 and while the request is in
              process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
              After this, i go to admin console and migrate teh JTA and JMS. After this, i am
              expecting other running Managed Server should restart the incomplete transaction.
              But this is not happening. The Managed Serve2 doesn't process the requst.
              But when i restart teh MAnaged SErver 1 again, it takes up the same request and
              processes it.
              Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
              Please note that the same thing is working fine when i stop the server using Admin
              console(Normal shutdown OR forced shutdown).
              Any comments in this regards are apprecciated.
              Thanks,
              Naresh
              

  • Ctrl and left click not working in DW CS5

    When Im working in design view for some reason my links are not working when I press ctrl and left click. To make them work I have to right click and select follow link.
    Its not a major problem because I can still carry on, but its annoying!

    Mr Construction wrote:
    When Im working in design view for some reason my links are not working when I press ctrl and left click.
    I presume you're talking about Live View, because links don't work in Design view.
    One thing you can try is selecting View > Live View Options > Follow Links Continuously, or select the option from the Live View Options menu in the Browser Navigation toolbar.
    It works only for the current tab, but is useful if you're following a lot of links.

  • Zoom the screen with ctrl   2-Finger Swipe not working in Mavericks

    I just bought a new Macbook Air for my wife (running Mavericks) and can't figure out why the Zoom the screen with ctrl   2-Finger Swipe is not working.
    I can't find the setting anywhere. 
    I looked on my Macbook Pro running Mavericks (on which the zoom still works), but I cannot find the setting on that computer either.
    Please help.
    Thanks

    System Preferences---> Accessibility---> Zoom---> Use scroll gesture with modifier key to zoom. Select ctrl in the drop down menu.
    It's a feature not normally turned on, so you might of had it turned on on your Mac before upgrading to Mavericks. And it just kept the setting.
    KOT

  • [LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

    Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
    See the above post for more information - here's a synopsis:
    CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
    Any ideas? 
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

    X. wrote:
    Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
    Any news on that?
    @mellroth figured out the solution :-)
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

  • [Solved]Ctrl+V not working in libreoffice on gnome(non-latin layout)

    When using gnome-shell&libreoffice or calligra, universal keyboard shortcuts such as ctrl+v or ctrl+z don't do anything while on a non-latin layout(hebrew in my case).
    If I want to paste something with ctrl+v I have to change layout to English and only then will it work.
    Under MATE the shortcuts work fine regardless of the layout in both applications(and all others i have tried).
    Under GNOME Shell all other applications I tried accept the shortcuts regardless of the layout(Firefox, gedit, Empathy, Nautilus)
    Anyone has an idea as to what might cause this behavior when using GNOME?
    Thanks.
    EDIT: Solved for libreoffice by removing the package "libreoffice-gnome". UI is not as pretty now but at least the keyboard shortcuts work.
    Last edited by shimi (2013-08-09 09:00:50)

    After months of switching layouts and banging my head against this bug, I thought I should check LibreOffice settings (I'm using 4.1.5.3 now). What figures? I did find something. And in just a few clicks.
    This is not a bug! It's simply a matter of configuration.
    For the regular keyboard shortcuts (like Ctrl+C, Ctrl+V, etc.) to remain operational in LibreOffice applications while using a non-latin keyboard layout (like Greek or Russian), go to Tools -> Options -> Language Settings -> Languages, check the Ignore system input language option, save, and Bob's your uncle.
    Hope this helps.
    Cheers!
    PS
    Technically, though, shortcuts still remain language-dependent. This means if you enable this option, you will have to set your document languages manually.

  • Some of the shortcut keys and directional keys on the keyboard are not working in FF 4 RC1 (i.e. Tab, Ctrl+C, arrow keys). They work fin in FF 3.6x and other applications.

    Crtl+C, Ctrl+V, Ctrl+X, Tab, and arrow keys do not work at all in FF4.0b13 and later. I am not sure about earlier versions as this is the first version I have tried.

    I found this helpful article (http://support.apple.com/kb/TS1381) and worked my way through the section "Some keys don't work as expected".
    All the following functions/settings are disabled or turned off:
    Text to speech / Speak selected text when the key is pressed
    Slow Keys
    Mouse Keys.
    The keyboard viewer just confirms my list of keys that are not working.
    Starting in safe mode makes no difference; nor does booting from the Mac OS X Install Disc and running Terminal from the Utilities menu. The same keys as before fail to work.
    This seems to confirm that it's a hardware issue. Anyone have any suggestions?

  • Ctrl + e and command + e stopped working

    I've seen a few other discussions about ctrl + e not working but none of them fit the problem I'm having here.
    On http://www.clarkwfobes.com I have ICE set up. I've been editing before and so has the client so it was working with no problem. Now when I or he goes to the site, ctrl + e doesn't work on his PC and command + e on my mac doesn't work either.
    Can anyone shed some light as to why this is happening. when I log into the manage sites section, I can edit from there and see that the client edited something on the site in January 2010.
    Thanks in advance for your help!
    best,
    Leslie

    Interesting.
    Well this won't hurt and might resolve your issue, it's sort of a "clean out everythng and reset" sort of approach but I find it cleans out the gremlins.
    Download the free OnyX and run ALL the cleaning and maintainence steps.
    http://www.titanium.free.fr/
    You can Cancel the reboots in between.
    Lastly use the Verify > Preferences check
    Now Reboot the machine.
    Another good piece of free software to have is Carbon Copy Cloner, all you need is a external drive and your a simple "hold option" boot off the clone for any emergencies with your boot drive.

  • E72 - Ctrl+C and Ctrl+V not working in browser

    yesterday i updated my nokia e72 mobile to latest firmware 31 , after that Ctrl+C and Ctrl+V and Ctrl+A shortcut keys are not working in browser. which have made me feel as bad as typing the same text again and again (usfel in blogging or web messaging).
    ALthough these shortcut keys are working in notes and sms application, but not in browser and Quick office applications (word, ecxel etc).
    Can some one tell , how to fix it. or do i need to wait for next firware update. firmware 31 was released on 31 of march 2010. and today is 26th of May. almost two months have passed, and nokia has not yet released patch for this bug ....
    Nokia, how long i need to wait ?, for this bug fix release.

    (Had to edit because didn't read previous post clearly.)
    I originally thought this was a problem of Quick office 6.2.217 Nokia_S603.2. I think it is a Nokia firmware problem as the previous post had stated.

Maybe you are looking for