CTS - Don't Always Want Transportable Change Lists

Is there a way to turn off automatic creation of the Transportable Change Lists?  At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created.  I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder).  Is there something like this for CTS?

This change did not resolve my issue (and we bounced the system to make sure it took effect).
If anyone knows of anything else, please chime in.
When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates.  I would like that turned off and I will only make transports when I am ready.
Thanks

Similar Messages

  • InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes.

    InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes. Can anyone help?

    See: Replace Your Preferences

  • In CMS, there is no Transportable change list in ID

    Hi All,
    I am using CMS. I want to transport Configuration Objects. But when I am going to Change list tab page in ID, I am able to see only open and close Change list. There is no option called Transportable Change List.
    I have followed HELP.SAP.COM which tells,
    "You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
    Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
    But still the status of the change list changes to closed and there is no tab called transportable change list.
    However I am able to transport IR objects correctly and there I am able to see Transportable change list too.
    Is there any specific configuration for this??
    Warm Regards,
    Gouri

    Hi Gauri,
    for ID, the XI track which you have created, you should specify SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0) swcv.............now you create a new config scenario in ID.............Now you should see transportable change list in ID....
    Thanks,
    Rajeev Gupta

  • Transporting directly from ID transporting from transport change list

    Hello,
    am using CTS+ transport.
    Here, what would be the difference after activating, all my objects of a CS go into tranportable change list and then i release for CTS transport, for all the objects of the CS.
    And, what if I do not do the above step and after activating my change list, right click on my CS and hit "export" and use the mode of transport as "cts" and transport the entire CS?
    My IR objects got successfully transported by the 2nd method.
    MY ID objects are failing, am not too sure, if this is the reason. Groups and tragets in SLD are correctly maintained.
    Thanks,
    vishal

    Hi Vishal,
    What we do is: (From Dev to QA)
    in Dev:
    1) Right click on software component,select Export, mode CMS
    2) Select objects to be transported.
    3) Export
    in QA:
    1) go to change list of lsadmin.
    2) Transfer list to your name
    3) Make necessary changes(communication channel parameters,etc)
    4) activate.
    Same has to be done from QA to Prod
    Are you doing the same?
    Thanks
    Regards,
    shweta

  • Error when other user want to change list item with rejected status

    Hi All,
    I have list with Content Approval option.
    One of users edits one of the items, which are being rejected. After that, other user wants to edit same item. Second user doesn't see rejected changes from other users, he changes some field in this item and want to save changes.
    Unfortunately, SP shows error and doesn't save changes. Content Approval is still Rejected.
    Why SP doesn't allow other users to change this item ?

    Hi,
    According to your post, my understanding is that second user get an error and can’t save changes when one user and the second user are editing the same item in a list at the same time.
    I do this test in my environment, and the result is the same as you get.
    In SharePoint, the system enables you and your colleagues to view the same item in a list at the same time.  
    However, it’s by design that the system can’t allow both you and your colleagues to save the their corresponding changes when they are editing the same item in a list at the same time whether this list enable the Content Approval option, the Content Approval
    status of the current item or not.
    If one user first click on the “Save” button to save the modified item, he can save the changes back, and all the late users will get the error and can’t save their modified item when they click on the “Save” button.
    For more information, you can refer to:
    http://blog.ciber.com/2014/say-goodbye-to-save-conflicts-co-authoring-and-real-time-communication-for-sharepoint-forms-with-signalr/
    http://adrianhenke.wordpress.com/2010/08/20/sharepoint-error-save-conflict-your-changes-conflict-with-those-made-concurrently-by-another-user/
    Best Regards,
    Yumi Fu

  • WGM printers don't always appear in users list

    Seemingly randomly, users aren't seeing the managed printers I setup in WGM. The user can usually log in again to see the correct list.
    The client is a new XServe running 10.4.10 with network accounts for these users. Clients are intel iMacs with 10.4.10 as well.
    Printers are setup in WGM via IP printing and built-in drivers.
    Any thoughts?

    Not that this helps but I have the same exact problem. Before I give my details sorry to be that guy who adds to the problem without solutions!
    All of my machines that I am testing this on are Mac Mini Intel Duo machines. I am also seeing this problem on the Mac Mini Intel Solo machines from last year. I haven't tested a PPC client yet.
    I am finding out that in my case this only happens when the machine first boots up. The first person on has no printers. If they log off and log back in they will have their printers. If anyone else comes to the computer and logs in after that initial login they will have printers. Once the machine has been rebooted the process starts all over again.
    I also have noticed that if the first user to login is a member of multiple groups they will not get prompted to choose the group that they belong to. If they log off and log back in then they are prompted.
    If I login the first time as the local admin I am not given the option to unchoose "enable Workgroup Management". I get to the desktop with no restraints. Again if I log off and log back in I will be prompted.
    Besides this odd group choosing behavior this business with printing though it appears that all other preferences as far as the dock, what programs they are not allowed to run, Machine name, energy saver, etc. All of that stuff works properly just not printing or group choosing up front.
    Message was edited by: Jesse Smillie

  • CTS+ Automated activation of change lists after import

    Hi,
    is there a way to have a CTS+ transport automatically activated after transport?
    Problem is that change lists of the transport user get overlooked. We would like to automatically activated everything after the import of a CTS+ transport.
    thx holger

    Hi,
    we created a transport with a right mouse click for a complete namespace and transported it to the target system ESR/IR and Integration Directory. It had to be manually activated (Change list of the CTS+ User)
    That is what we want to skip.
    --->  Now when I write this I remember that this is a "feature", you guys are right -- sometimes you had to check your comm channels etc.  and make these specific changes..
    Right?
    (You cannot always remember everything, true? That is why we have sdn as collective brain)
    Edited by: Holger Stumm on May 12, 2010 11:18 AM - remembers now

  • HT5312 when i want to change my security questions i don't have option to send rest  security questions ?

    when i want to change my security questions i don't have option to send rest  security questions ?

    You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
    The reset option will only appear if you have a rescue email address. Creating one requires supplying two of the answers.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (105986)

  • Ibook g4 (2005) wont boot from cd.  always wants to boot from hd.  how do i change the boot sequence?

    so my ibook as i wrote will not boot from the cd rom.  it always wants to boot from the hd but i had the hd wiped b/c it had linux and it would not allow me to access the firmware.  now that the hd is clean i was able to access the firmware but i dont know how to change the boot sequence.  the starts to spin in the drive and acts like it want to boot from the cd but the cd just keeps spinning and i get a screen with a blinking question mark and smiley face.

    Hello and welcome to the support community.
    Why do you need to go into the firmware?
    If the disk is a boot disk like Mac OS X, then all you need to do is hold down 'C' key or the option key while the disk is in the drive and the iBook is booting up (After the chime)
    If either doesn't work, then there must be an issue with the disk not being a boot disk or corrupted. Alternatively a problem with the optical drive. You don't need to go into the firmware to change any boot selection.
    Hope this helps

  • I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

    I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

    Good day BenithaK,
    Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
    Apple ID: What to do after you change your Apple ID - Apple Support
    To change your iTunes billing information for either Apple ID account, follow the directions in this article -
    iTunes 12 for Mac: Manage your iTunes Store account
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • Hello I have an apple Id on my ipad 2 and I want to change my password of my Id but I could not do it because I don't remember the answers to the security questions what to do?

    Hello I have an apple Id on my ipad 2 and I want to change my password of my Id but I could not do it because I don't remember the answers to the security questions what to do?

    Did you setup your account with a rescue email address?  If so...
    http://support.apple.com/kb/HT5312

  • I have an iPod nano 1st gen. my system operative is windows vista . I just want to transfer all the music of my iPod to iTunes library like I was able to do it in the past I don't know what have change?

    I have an iPod nano 1st gen. my system operative is windows vista . I just want to transfer all the music of my iPod to iTunes library like I was able to do it in the past I don't know what have change?

    Thank you deggie to answer me . You know, I don't know much of computers and of technology but when I bought that ipod back when  they came out 2005 I was able to download music from my CDs and from Youtube to itunes then transfer to my ipod and back and forth to itunes .  Then if I had changed of computer I was able to transfer to that new computer.Why I'm not able to do it ? There is a program(Sharepod) that allow to do that but it cost $35.00 but I thought that was free or it is because that now I have to buy from itunes only?

  • Can I change my verified primary email address associated with my apple id? I don't want to change my apple id as I have music/apps associated with it.  My current email will be changing soon.

    Can I change my verified primary email address that is currently associated with my apple id?  I don't want to change my apple id because I have music and apps assoicated with it.  I tired following some of the posts that shows going to an apple dialog that allows you to update your apple id and primary email separately, but when I try doing it I get a dialog that says I can update my apple id and my primary email.  I don't want to change my apple id only my primary email.  Anyone have any suggestions?  That email is going away soon.  Thanks for any help.

    Did you change the email for the Apple ID or did you create a new Apple ID? A new Apple ID cannot be used with content that was bought using a different Apple ID.
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • I want to change the file location for the automatic backup file bookmarks.file, but I can't find browser.bookmarks.file in the list on the about:config page.

    I asked about automatic backup of bookmarks and received the following answer:You can make Firefox 3 create an automatic HTML backup (bookmarks.html) when you exit Firefox if you set the pref [http://kb.mozillazine.org/browser.bookmarks.autoExportHTML browser.bookmarks.autoExportHTML] to true on the about:config page. That backup is created by default in the profile folder as bookmarks.html, but you can set the file name and path via the pref [http://kb.mozillazine.org/browser.bookmarks.file browser.bookmarks.file] on the about:config page. I went to about:config page and toggled browser.bookmarks.autoExportHTML to “Yes” and it’s working. However, I want to change the file location, but I can’t find browser.bookmarks.file in the list.

    The browser.bookmarks.file preference does not exist by default. Right-click in about:config and select "New > String" to create it.

  • How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

    How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

    Hi littlemansa,
    If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    http://support.apple.com/en-us/HT4137
    Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results. 
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

Maybe you are looking for