Cube does not get refreshed after maitainence

Hi
I have a cube in a schema that was existing.
I have added new data to the fact table that is mapped to the cube.
I maintained the cube by using the complete refresh option in the analytical workspace manager.
After maintaining the cube and selecting from the cube view I do not see the new data that I have added.
I have even tried dropping and recreating the cube but still it does not work.
I have also tried adding the clean step for all measures and yet it does not work.
Creating the cube with a different view name is a solution but that is not what I want. I want to be able to refresh the same view.
Please advise / suggest
Edited by: CelestialCitizen on Sep 4, 2011 9:53 PM

Hi All
The above is a false alarm.
Basically it turned out that one of the keys in the fact table was not a leaf node in the dimension.
After rectifying that all works fine now.

Similar Messages

Lov command link does not get refreshed

We are using Jheadstart 11.1.1.4.26 with Jdeveloper 11.1.1.4 and we think we have found a bug.
The scenario includes two items, an inputtext (FirstName) and an LovItem (ManagerId)
The LovItem (ManagerId) is dependent on the inputtext (FirstName) with Clear/Refresh and has a Disabled Expession #{bindings.EmployeesFirstName.inputValue==null} so that when the Firstname is null the LovItem (ManagerId) is disabled.
This seems to work fine except from the commandLink of the LovItem which does not get refreshed. This is probably because the Id of the commandLink is not included in the componentsToRefresh item inside the EmployeesFirstNameDependsOnItem.
Of course we could create a custom vm for the default/misc/facesConfig/dependsOnItemBean.vm and pass the id of the commandlink but we are looking for a more generic way.
<managed-bean id="__168">
<managed-bean-name id="__169">EmployeesFirstNameDependsOnItem</managed-bean-name>
<managed-bean-class id="__170">oracle.jheadstart.controller.jsf.bean.DependsOnItemBean</managed-bean-class>
<managed-bean-scope id="__171">application</managed-bean-scope>
<managed-property id="__172">
<property-name id="__173">itemsToClear</property-name>
<list-entries id="__174">
<value id="__175">EmployeesManagerId</value>
</list-entries>
</managed-property>
<managed-property id="__176">
<property-name id="__177">componentsToRefresh</property-name>
<list-entries id="__178">
<value id="__179">EmployeesManagerId</value>
</list-entries>
</managed-property>
</managed-bean>
I sent a testcase to '[email protected]' last friday.
Regards
Vasileios

Vasileios,
Thank, I was able to reproduce this. We will fix it in the next release.
Here is how you can fix it using custom templates:
- add the following macro to your custom macros file:
#macro (ITEM_LINK_PARTIAL_TRIGGERS)
partialTriggers = "#foreach($item in $JHS.current.item.dependsOnItems) #if (($JHS.current.pageComponent.hasOverflowRight || $JHS.current.pageComponent.hasOverflowRightWithSplitter || $JHS.current.pageComponent.hasOverflowBelow || $JHS.current.pageComponent.hasOverflowBelowWithSplitter) && $JHS.current.item.displayInTableOverflow && !$item.displayInTableOverflow)${JHS.current.group.shortName}PC:${JHS.current.group.shortName}Tab:#end${item.id}#end" #end
- in the custom formLovItem and tableLovItem templates, add this macro to the commandLink element:
<af:commandLink immediate="true" partialSubmit="true" #ITEM_DISABLED_IN_FORM() #ITEM_UPDATEABLE_IN_FORM() id="#NEW_ID("cl")" #ITEM_LINK_PARTIAL_TRIGGERS()
Steven Davelaar,
JHeadstart team.

Toplink Cache not getting refreshed after executing UpdateAllQuery

After executing UpdateAllQuery, the records in the database are getting updated, however the Toplink cache is not getting refreshed with the new data, it still has stale data which is causing issues.
We're also setting
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
Thanks.

Toplink version is 10.1.3.0.0
Here is the code
UpdateAllQuery updateQuery = new UpdateAllQuery(RegisterImpl.class);
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
ExpressionBuilder registerBuilder = updateQuery.getExpressionBuilder();
updateQuery.addArgument("userIdArg");
updateQuery.addArgument("channelArg");
updateQuery.addArgument("tokenArg");
updateQuery.addArgument("dateArg");
updateQuery.addArgument("businessFuncIdArg");
Expression reservedDetailRegExp = registerBuilder.get("reservedDetail");
// build expressions
Expression userIdExp = reservedDetailRegExp.get("userId").equal(
registerBuilder.getParameter("userIdArg"));
Expression channelExp = reservedDetailRegExp.get("channel").equal(
registerBuilder.getParameter("channelArg"));
Expression tokenExp = reservedDetailRegExp.get("token").equal(
registerBuilder.getParameter("tokenArg"));
Expression dateExp = reservedDetailRegExp.get("date").equal(
registerBuilder.getParameter("dateArg"));
Expression busFuncExp = registerBuilder.get("businessFuncId").equal(
registerBuilder.getParameter("businessFuncIdArg"));
// set selection criteria
updateQuery.setSelectionCriteria(userIdExp.and(channelExp.and(tokenExp.and(dateExp
.and(busFuncExp)))));
// substitute the values
updateQuery.addUpdate(reservedDetailRegExp.get("userId"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("channel"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("token"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("date"), "");
updateQuery.addUpdate(registerBuilder.get("businessFuncId"), "");
In the object model for the query, the RegisterImpl has an aggregate mapping (ReservedDetail), which in turn has a number of direct-to-field mappings and an one-to-one mapping to businessFunction (for our query we use a direct query key "businessFuncId")

Report is not getting refreshed after changing prompts once again?

HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
Harshad

The workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda

Memory does not get released after encrypting/ decrypting files.

I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I have kept my application run for days but this memory do not come down.
Interesting thing is if I encrpyt/ decrypt the same file again and again the memory do not rise by 70 Mb, but for first 3-4 iterations 5-8 Mb of memory is released in each iteration and after that memory starts increasing again in chunk of 2-5 Mb and after few iteration some memory get released but in all the memory always increases. The code to encrypt file is simple
Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] salt = generateRandomBytes(16);
Rfc2898DeriveBytes rfc = new Rfc2898DeriveBytes("123456", salt, 1000);
SecretKey key = new SecretKeySpec(rfc.getBytes(32), "AES");
c.init(Cipher.ENCRYPT_MODE, key );
FileOutputStream fos = new FileOutputStream(encryptedFile);
CipherOutputStream cos = new CipherOutputStream(fos);
FileInputStream fis = new FileInputStream(largeInputFile);
int len = 0;
byte[] buf = new byte[1024 * 128];
while((len = fis.read(buf)) != -1) {
cos.write(buf, 0, len);
cos.close();
fis.close();
This is simple observation I have seen in my program:
I am using Windows 7 64 bit with 16 GB RAM Intel Core 2 Duo 3.00 GHz and file encrypted was 700 MB size
Explanation
Memory Usage (As shown in Windows Task Manager Private Working Set column)
When program starts
9924 K
After first iteration of encryption
81,180 K
Second Iteration
78,254 K
3 Iteration
74,614 K
4 Iteration
69,523 K
5 Iteration
72,256 K
6 Iteration
70,152 K
7 Iteration
83,327 K
8 Iteration
85,613 K
9 Iteration
95,124 K
10 Iteration
92,698 K
11 Iteration
94,670 K
I kept the iteration on for 2000 iteration, the same pattern was observed and at the end memory usage 184,951 K, this memory was not released after calling System.gc() also.
What could be the possible problem, is it the CipherOutputStream or Cipher class having some memory leak or I am doing something wrong here?

ash wrote:
We are using WebLogic Server 7.0 runing on Solaris 2.7.
We are experiencing a problem where the memory does not seem to be released after
the application has been shut down.What do you mean by "application has been shut down"? Is the server
process running or not? Is it a zombie?
The
Unix 'top' command reports that memory has not been reclaimed by the O/S. What exactly has it reported? If the process is gone, then I'm pretty
sure your O/S has reclaimed the memory. What exactly are you looking at
in top?
-- Rob
> Continue
restarting it will forces us to reboot the server as there will be more and more
memory lost when restarting the WebLogic.
Advice to fix the problem is much appreciated. Thanks.

ADF Region not getting refreshed after Commit

Hi everyone!
I'm having some trouble with a region that is disturbing me for more than 2 weeks, its true guys, I tried everything!!
My parent page is a normal ADF .jspx page that contains inside it a task-flow call. The first task-flow activity is a router, after sending a String
to router it chooses the region activity that fits the page (in this example I always pass the same value, same String).
After the router is called then it delegates to "ExecuteWithParams" method call before calling my final region that have its query executed with
parameter set inside task-flow.
The region is refreshed (refresh="ifNeeded") when I change row inside a table in ParentPage, all fine here.
The problem is:
- After any Commit (with navigation case or executable binding) is issued inside Region the region save its state and does not refresh anymore, even if task-flow parameters change.
Already tried CacheResults="false" on iterator too.
I'm using Jdeveloper 11.1.2.1.
Thanks in advance!!

Hi,
so I think the shirt summary of your problem is that an ADF region doesn't refresh after it issued a commit. Sounds like a bug to me if this reproduces in a test case. Do you have a testcase based on the Oracle HR schema ? If so, send it my way in a zip file you rename to ".unzip". My mail address is in my OTN profile. Note that bugs I file are not visible to customers. So if you need to keep track of any state of the issue, you need to file a service request with support yourself.
Frank

My jsp page does not get refreshed

I have a jsp page which looks like -
the top portion of the page has 3 textboxes and a submit button to add an entity.
the rest of the page displays a list of all the entities in the system.
when i load the jsp and add a new entity, the new entity shows up on the list. when i try to add a new entity second time, the entity does get added into the database, but does not show up in the list.
In the action class, i make a request to the dao and print all the values from the list, returned by the dao. Since the newly added values are present in the list, returned by the dao, i dont think there is anything wrong with my business layer or the DAO layer.i dont understand, why it does not show up in the jsp page.
any ideas. i am wondering if the data is being cached, so, in the jsp page i have also set the following parameters:
<head><meta http-equiv="Expires" CONTENT="0"><meta http-equiv="Cache-Control" CONTENT="no-cache"><meta http-equiv="Pragma" CONTENT="no-cache">
--------------------------------------------------------------------------------Has this to do anything with Struts and Hibernate which i use in my application? The same thing happens, when i edit. when i click on edit button, it takes the user to a different page, i edit the details and click on save button. the control returns back to the list page, but the changes are not shown, although the changes are saved to the db. how do i prevent cache. i am putting my entire list in a request object, before doing an action forward to the jsp page

Hi,
instead of using the cache in the meta tag try with the following lines,
response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("Expires", 0); Regards,
Bala A

ALV tree not getting refreshed

Hi
I have 2 fields A and B in the main screen and a tabstrip with 4 tabs.
Each tab contains a ALV tree
Now when I open the main screen for the first time the ALV tree data is coming properly as per the default values of A and B.
But when I change the values of A or B the ALV tree does not get refreshed. The final table has the changed data but the ALV shows only the old data.
I am doing the ALV tree for the first time in module pool. Please provide some sample code to refresh the ALV tree.
Regards,

Hi
Alv tree is now getting refreshed.The subscreen refresh problem is solved
we have to use REFRESH_TABLE_DISPLAY method to do it.
if tree1 is initial
create object
create container
call method set_table_for_first display
else.
call method refresh_table_display.
endif.
Regards,
Mozila

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

Data is not Getting refresh in Dashboard

Hi I have implemented Xcelsius on the top of SAP BI System.
I have the following architecture -
SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
what could be the possible casue ?
Is QWaas always fetch the dat at run time ?
Thanks

QaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
Hope that helps,
David.

Tree Table is not getting refreshed properly in Jdev 11.1.2.0

Hi,
I am seeing a peculiar issue with tree table not getting refreshed in Jdev 11.1.2.0.
Let me explain you my use case.
I have a tree table in a page, where the first column is displayed as selectBooleanRadio component. When user selects this selectBooleanRadio component, that treetable node should get expanded and at the same time all the child records(I have a select boolean check box component(transient attribute) at the child level) for that node should get selected. This is to allow user to unselect the child records, which he/she does not want to process further(some functionality).
Now when the user selects any radio button, the tree table node is not expanded, but the arrow beside the radio button for that node can be seen as expanded.
I thought it may be a partial trigger issue, so i tried refreshing the tree table programatically as well. But it was of no use.
Then I set the partial triggers wrt to SelectBooleanRadio component on the parent container of the TreeTable. After which somehow the node got expanded but the tree table shrinks in width and the actual disclosure functionality of a tree table is lost.
The same use case works perfectly fine in Jdev 11.1.1.5.
For reference:
I created a sample test case(Dept/Emp) in jdev version 11.1.1.5, which works fine. Workspace: http://adf-use-cases.googlecode.com/files/TreeTable1.rar
But the same test case, when i created in jdev version 11.1.2.0, gives issues. Workspace: http://adf-use-cases.googlecode.com/files/TreeTableUseCase.rar
If you download the application and run in respective jdev version, you will get to know more about the issue.
Please let me know, If I am doing anything wrong in the implementation of this use case.
Any help/suggestions are appreciated.
Thanks
Umesh
Note: My complete application is in Jdev 11.1.2.0, so I can't degrade my jdev version to 11.1.1.5.

Thanks Frank for the reply.
But upgrading the jdeveloper to 11.1.2.2 is not an ideal solution for us now, because of the size of the project.
Some how, the issue of refreshing the tree table is resolved. I am using a command button with clientComponent to true and causing a full page refresh.
I am not sure, if this is a perfect solution.
As you said, that this behavior may be an issue with the Jdev version 11.1.2.0, I am using. I am going with the above said approach.

Cell data not getting refreshed in which user enters data OO ALV(editable)

Hi Friends,
I am using OO ALV for editable grid display.
I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
      CALL METHOD obj_alvgrid1->refresh_table_display
does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
Piece of code:
SET HANDLER obj_event_receiver->handle_data_changed
                                     FOR obj_alvgrid1.
    METHODS: handle_data_changed
                   FOR EVENT data_changed OF cl_gui_alv_grid
                       IMPORTING er_data_changed
                                 e_onf4
                                 e_onf4_before
                                 e_onf4_after.
METHOD handle_data_changed.
DATA : v_valid    TYPE char1,
         v_refresh TYPE char1.
*--check mt_good_cells semantically
CALL METHOD perform_semantic_checks( er_data_changed ).
*--If PBO is again visited, just refresh the ALV grid.
CALL METHOD obj_alvgrid1->refresh_table_display
    EXCEPTIONS
      finished = 1
      OTHERS   = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
ENDMETHOD.
METHOD perform_semantic_checks.
    LOOP AT er_data_changed->mt_good_cells INTO w_good.
      v_index = sy-tabix.
      CASE w_good-fieldname.
        WHEN 'ZASCAS'.
*Now here based on some conditions I am changing my final internal table i_zamtsmatnp
                          MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
                                           w_good-row_id TRANSPORTING
                                             zascas modif.
User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
Regards,
Surya

Hi Surya,
   The approach you are following is correct. You need to use the comibnation of all these things:
Event - DATA_CHANGED
Methods - CHECK_CHANGED_DATA
             - GET_CHANGED_DATA.
However, here are few standard programs which are having similar functionality.
BCALV_EDIT_03
BCALV_EDIT_07
Check out these once.
Note: If anything is helpful, dont forget to reward points
Thanks,
Adithya K
SAP Practise
[email protected]

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

Oracle BI Publisher Report from OEM12c data is not getting refreshed...

Hello,
We've integrated BI Publisher with EM12c. I've developed a report which checks a given database extents information (initial, next, maxextents) at tablespace level. The dataset is chosen as EM repository. The report runs absolutely fine until new data is added to a database. For eg, I created a new tablespace. The new tablespace related info is not getting refreshed despite the fact that I've refreshed the data source and checked that the tablespace exists in the database.
Can anyone pls help.
Thanks,
Dhananjay

Dhananjay,
Has the data in the EM repository view been refreshed? The report retrieves data via the published repository views. If the view does not display the latest information, then you will have to wait till the relevant config or monitoring collections are complete.

Cube does not get refreshed after maitainence

Similar Messages

Maybe you are looking for