CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product

I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!

We only support ESXi
Sent from Cisco Technical Support iPad App

Similar Messages

  • I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  I get a message on my phone that says " the URL you are requesting is not found on this server".  Pics and videos have been deleted too.

    I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play.  I get a message on my phone that says " the URL you are requesting is not found on this server".  I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted.  I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either.  Is there someway to get the videos to play on my phone again?  Make the photos not as blurry as they are now and to restore the pics and videos that have been lost?  I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be.  Please help if you can.

    I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
    Need help too!!

  • When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    TLCMediaDesign wrote:
    I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
    IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
    When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

  • JavaScript required. The browser that you are using does not support JavaSc

    I keep on getting this message when I'm trying to log on to Hotmail
    JavaScript required. The browser that you are using does not support JavaScript, or you may have disabled JavaScript
    And my browser (IE 6) cannot go to any java links. They either don't load or they are blank pages. I tried installing java, enabling them on the internet options, and even installed a new browser it is still the same thing!!!
    I'm very pissed right now but I really really need some help. Sorry for the inconvenience.
    Thank you, Zaragon

    JavaScript is different from Java. Somehow, security has gotten turn on in IE. If you go to tools, internet options, security, then look at Internet (for hotmail anyway), hit the custom level button, you will see that scripting has been disabled.

  • Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

    So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
    The only way I have found is to sell membership to a secure area where the files are linked.
    When I create the secure zone, I want a one-time-fee, but the system says:
    "ERROR: The payment gateway that you are using does not support recurring payments"
    The payment isn't recurring!
    Micah

    "Note that you have to use seamless gateway to process such payments."
    Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error.  Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
    Micah

  • Safari browser version you are running does not support community tool bar. what's that mean and where is it coming from or how do I get rid of it ?

    I keep getting the message "Safari browser version you are useing does not support community tool bar." Where is this coming from and how do I get rid of it ?

    That toolbar/ct plugin causes problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • I downloaded Firefox 4 onto my PowerPC G4 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application "Firefox" because it is not supported on this architecture. I can't find my Firefox 3.6.16 I'm on Safari.

    I just want to download Firefox 3.6 again
    I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.

    Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.

  • Just downloaded mavericks, now iPhoto won't load because of an error message that says "You can't open the application "IPhoto" because it is not supported on this type of Mac" . I have a 17" MacBook Pro, mid 2010 model running 2.53 GHz and Intel Core I5,

    I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!

    What version of iPhoto do you have installed?  Is if one of the versions shown as not compatible in this screenshot?
    If it is then go to the App Store and download iPhoto 9.5.  It will be free if you have an iPhoto 9 or later verson currently.
    OT

  • While trying to open iPhoto this message coming-You can't the application "iPhoto" because it is not supported on this type of Mac

    I recently upgraded my MacBook from Moutain Lion to Maverick.After upgrading I can not open the iPhoto.Whenever I try to open I get the message --You can't open the application "iPhoto" because it is not supported on this type of Mac.Tell me how to solve the problem?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

    I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • Your request could not be completed the item you are request in not  currently available in the u.s store

    hi to support
    i want in the appstore with error
    ::your request could not be completed the item you are request in not  currently available in the u.s store::
    tanks fo support

    You aren't talking to Support here: this is a user-to-user forum. The message you see usually means that the item has been removed from the Store. If you want to follow this up go to https://expresslane.apple.com ; select 'iTunes' in the first column and then 'iTunes Store' in the second column.

  • FF4 will not open after download... "you can't open the application "firfox" because it is not supported on this application." If 4 doesn't work on OS 10.5.8, then how do I get the old firfox back?

    I downloaded the FF4 update and it has the "no smoking" symbol over the FF icon. When you attempt to open the app it states: "you can't open the application "firfox" because it is not supported on this application."
    I have OS 10.5.8
    If it will not work, how do I get the old version of FF back?

    Are you sure you downloaded the .dmg file? It should have automounted for you and opened in finder. Then all you have to do is drag the FF4 icon over the Applications link in that finder window and it will install.
    I seem to recall seeing the error you noted when I accidentally clicked a windows .exe file on my Mac.
    Also, if you visit firefox.com from your Mac, it should be prompting you to download the .dmg anyway. The only way you could get the .exe would be to click the "other operating systems" link below the main download button.

  • On PowerBook G4 OS 10.5.8 my chess App tells me "You can't open the app 'chess' because it is not supported on this architecture. It has worked before. What does that means? What can I do to get it working?

    On PowerBook G4 OS 10.5.8 my chess App tells me "You can't open the app 'chess' because it is not supported on this architecture. It has worked before. What does that means? What can I do to get it working?

    It sounds like you might have accidently copied Chess over from an Intel Mac, or an Intel Mac's installer DVD.  The architecture typically means it is designed uniquely for either Intel or PowerPC.  Be sure to extract Chess from the 10.5 Retail installer disc that looks like * and not any other disk.  http://www.charlessoft.com/ 's Pacifist lets you extract individual applications from installers without having to reinstall everything.

  • You can't open the application "Xcode" because it is not supported on this type of mac

    My System Configuration:
    OS X Version 10.8
    Processor 2.5GHz Intel Core I5
    4GB Ram
    Downloaded xcode 4.5 version and extracted. When I double click on the icon I am getting below error. Can you please some help me out.
    You can't open the application "xcode" because it it not supported on this type of mac
    Thanks in Advance,

    From Application folder.
    By the way found solution myself. to install xcode 4.5 we should have 10.5.8.2 update.
    I am installing now. will update this thread once complete installation.
    Thanks

Maybe you are looking for

  • Macbook Pro to IMac (2009, no thunderbolt) external monitor

    Hi I have just got my new Macbook Pro and wanted to connect it to my IMac to use that as a second display. I have done a bit of research and it looks as if I need a mini display cable to mini display cable, is this correct? I am assuming that this ca

  • Cable to migrate from Macbook (late 2007) to Mac Mini 2012?

    What cable should I use to migrate files from Macbook (late 2007) to Mac Mini 2012. The ethernet migration took 30 hours. The Macbook messaged success but the Mini did not show that any files were transfered.

  • System Registration Error in UWL

    Hello All i am getting following error while trying to register my sap crm system in UWL.: System SAP_CRM: Tue Jul 29 14:56:18 GMT+05:30 2008 (Configuration) :org.xml.sax.SAXException:com.sap.engine.lib.xml.parser.Parser Exception: End of model expec

  • Domain Name Change procedure

    Can anyone tell me which are the changes to do in the alui portal when the domain name change ? Which are the files to modify ? Does any tool exist to automate the task ? ex : portal.toto.com became portal.titi.corporate.com

  • Cannot attach PL/SQL library APPCORE when opening template.fmb

    Hi, we have downloaded all .pll from $AU_TOP/resource directory to local folder and given path in windows registry ie HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/FORMS60_PATH to the local folder in which all pll are kept, i have kept all the important fmb in