CUCM Upgrade from 9.1.2 to 10.5
Hi all,
I have tested upgrading CUCM from 9.1.2 to 10.5 in my lab. As i read before, we need some cop files to upload to CUCM before upgrade procedure.
Cisco named this upgrade as <Refresh Upgrade> and during this process, RHEL version will also upgrade with CUCM version.
On my test, i dont upload any cop file before upgrade. Just uprade to 10.5 version.
Before upgrade my RHEL version was 5(32 bit) and after upgrade it is 6(64 bit).
After upgrade, everything seems ok but upgrade took lots of time, like 4 hours.
During upgrade there is no connection to CUCM and i saw blue screen :)
What is your opinion? Will this method work on customer enviroment?
Do you test this procedure before?
Best Regards,
Mesut
Dear Carlo & Chris, May I ask you to clarify on below comment which is mentioned in Release note of CUCM 10.5
I don't understand why Cisco has mentioned this, if its not required ? I would appreciate your any inputs.
Preupgrade COP File
If you are upgrading to Cisco Unified Communications Manager Release 10.5(1), or later, from a release earlier than Cisco Unified Communications Manager Release 10.0(1), you must download and install ciscocm.version3-keys.cop.sgn on every node in the cluster. This Cisco Options Package (COP) file has the RSA keys that are required to validate the upgrade. Missing RSA-3 keys will result in status errors in the Software Installation/Upgrade window of the Cisco Unified Operating System Administration interface.
Suresh
Similar Messages
-
CUCM upgrade from 7.1.5 to 10.5.1.10000-7
Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2.
The reason why I preferred because this jump upgrade we can achieve in isolated network.
In that case can anybody please help to get specific document for that. Kindly have a look on this case.
Regards,
AbiYou can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..
Please refer to the vide below.
https://www.youtube.com/watch?v=JzG4kz1_hL4
All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html -
CUCM Upgrade from 8.6(2a) / 8.6.2.20000-2 to 8.6.(2a)SU2 (8.6.2.22900-9)
I'm getting ready to upgrade a client's CUCM cluster from 8.6(2a) / 8.6.2.20000-2 to
8.6.(2a)SU2 (8.6.2.22900-9). They use extension mobilty with UCCX version 8.5.1.11003-32.
Does anyone know of any issues with ugprading this cluster vis a vis their UCCX version ?
The current CUCM Version 8.6(2a) / 8.6.2.20000-2 shows a JTAPI shows the following JTAPI version:
admin:show packages active cm-jtapi-
Active Side Package(s): for cm-jtapi- package(s)
cm-jtapi-plugin-8.6.2.10000-2
From the ReadMe For Cisco Unified Communications Manager Release 8.6(2a)SU2
http://www.cisco.com/web/software/282074295/93949/cucm-readme-862asu2.pdf
I see that it shows:
cm-jtapi-plugin-8.6.2.10000-10.i386.rpm
Once I have performed the CUCM upgrade - do I need to upgrade the JTAPI plugin on the UCCX Platform?
TIAMohamed,
I have not actually peformed the upgrade yet. If you have done so - please reply with any lessons learned that you have.
I would upload the file to all the servers in your cluster prior to your upgrade maintenance window. This should not be service impacting.
Then during your upgrade maintenance window -
Step 15 Once the Publisher and the subscribers have been upgraded, a version switch must be completed so the servers reboot to the new upgraded partition as follows;
Web Browse to the Publisher’s OS Administration GUI
To restart the system and activate the upgrade, choose Settings > Version; then, click Switch Version.
The system restarts and should be running the upgraded software. Once the Publisher is accessible, proceed with the subscribers.
Good Luck,
Amir -
CUCM upgrade from 6.1(2) to 6.1(3b) - rollback problems...
Hi all,
I have upgraded our test lab CUCM server from 6.1(2) to 6.1(3b). Although we have a genuine MCS server bought from Cisco, we run only the demo licencing on the server (simply because we only have a few test phones and gateways running on the server). We have rebuilt this server a few times so we may have had more licences installed previously - the 'demo' licencing seems to allow me test all i need to.
The upgrade to 6.1(3b) seemed to go ok. My only concern was the time it took after the CUCM server restarted for the IP phones to 'register' - seemed to take 30 mins or more before they jumped into life and re-registered etc? Is that normal? (I suspect the CallManager Service took a while to start?)
However, I have had a few problems when trying to rollback the upgrade to the older partition. I followed the Cisco doco and all seemed to work ok, the CLI showed it selecting the old partition on the reboot, and then starting services for 6.1(2) [lots of green [OK] messages etc)
Upon the full restart of the server, i noticed that the CallManager Service and the Cisco Messaging Service were NOT running! I tried all i could think of to get these to restart:Went to Service Activation – stopped and restarted the CallManager service and the other one. Then went back to Feature Services. CallManager was ‘running’ then after i refresh the page it reverts to ‘Not Running’ ! IP Phones therefore do NOT register.
Tried a restart of the server (same partition) - Watching CLI during reboot – all green [OK] messages. No errors reported that i can see. IP phones still dont register when server restarts. The two services remain 'Not Running'
I then restarted using 'switch' and ran the upgraded CUCM version - this started fine, and all ran ok! Phones regsitered, all seems fine!
I have attached a few screenshots, not sure if they are relevant or of any use.
Has anyone seen this issue before after an upgrade? I am not overly comcerned becaue the 'upgrade' worked, but it would be nice to know i can rollback if i need to do incase of any issues.
Is there anywhere in CUCM i can check to see if the failed services are generating an error message or a reason for them not starting?
Thoughts appreciated
RgdsHey Andy,
Hope all is well buddy!
The problems you are seeing here are most likely "purely" License related due to the changes
that were implemented between 6.1(2) and 6.1(3). I don't see this being a problem with permanent
"production" Licenses. Have a look;
Cisco Unified Communications Manager Releases 7.1(2) and 6.1(3) introduce these licensing enhancements.
Description
Cisco Unified Communications Manager Releases 7.1(2) and 6.1(3) identify the state of a license; that is, if it is missing, if it is a demo license, or if it is an uploaded license. In addition, Cisco Unified Communications Manager Administration warns you whether Cisco Unified Communications Manager currently operates with demo licenses, with an insufficient number of licenses, or with an incorrect software feature license.
GUI Changes
The following windows display the state of licenses in Cisco Unified Communications Manager
Administration:
- Cisco Unified Communications Manager currently operates with demo licenses, so upload the appropriate license files.
- Cisco Unified Communications Manager currently operates with an insufficient number of licenses, so upload additional license files.
- Cisco Unified Communications Manager does not currently use the correct software feature license. In this case, the Cisco CallManager service stops and does not start until you upload
the appropriate software version license and restart the Cisco CallManager service.
License File Upload (System > Licensing > License File Upload)-This window displays a message
that uploading the license file removes the demo licenses for the feature.
http://www.aironet.info/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613a.html#wp472518
Now for the Cisco Messaging Service
This is only used in "Legacy" integrations which I'm guessing is not
the setup for your lab, so you should be good to go here.
Cisco Messaging Interface Service
The Cisco Messaging Interface allows you to connect a simplified message desk interface (SMDI)-compliant external **Third Party** voice-mail system with the Cisco CallManager. The CMI service provides the communication between the voice-mail system and Cisco CallManager. The SMDI defines a way for a phone system to provide a voice-mail system with the information needed to intelligently process incoming calls.
Hope this helps!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727 -
ELM shows insufficient licenses after CUCM upgrade from 9 to 10.0.1
Hi All,
I just finished upgrading cucm 9 to cucm 10.0.1. Upgrade completed successfully, but elm now shows insufficient license message.
This is a Vmware installation BTW, I doubt that it matters the CUCM 901 worked fine with its ELM.
The ELM is coresident with CUCM. I though that upgrading CUCM will upgrade ELM too, but the Dashboard says to upgrade to latest version of ELM.
When I ordered upgrade through UCSS and downloaded all the files that were included in this upgrade order, one of the files was CiscoPrimeLM_64bitLnx_10.0.1.10000-19.sgn.iso.
I tried to use CUCM OS administration with this file to upgrade ELM, but OS Administration doesn't recognize it as a valid file.
The file that I used for CUCM upgrade was: UCSInstall_UCOS_10.0.1.10000-24.sgn.iso
So at this point I'm not sure whether ELM needs to be upgraded or I need new licenses for CUCM version 10.
Thanks
Yury Brodsky
Telecommunications Specialist
AudioCodes
27 Worlds Fair Drive
Somerset, NJ 08873
Direct: 732-652-2162
Fax: 732-469-2298
Email: [email protected]
Upgrading co-res CUCM should have upgraded your ELM as well. It should now show as Prime License Manager when you log in. I'm guessing you just don't have any CUWL 10.x licenses installed. Can you attach a screenshot of the License Usage page in PLM?
You may need to email [email protected] to move your 9.x licensing to 10.x licenses. -
CUCM Upgradation from 8.6 to 9.1
Hi
when we upgrade cucm 8.6 to 9.1, can we use the same 9.1 iso file which we wre using for the full installation?
Thanks in Advance....Hi Midhun,
You need to use an upgrade file, not the bootable file that you use for fresh installation. You can either request it through the PUT tool or you can download it from the following link
http://software.cisco.com/download/release.html?mdfid=284510097&flowid=45900&softwareid=282074295&release=9.1%282%29SU1&relind=AVAILABLE&rellifecycle=&reltype=latest
HTH
Manish -
Cucm upgraded from 8.6 to 9.1 and now want to add uri dialing
Environment:
Upgraded 8.6.2 to 9.1
AD Sync users and authentication
Upgrade went well
I thought that with the upgrade the existing AD integration would bring over the Directory URI or give me the option to choose the Directory URI choices from the existing AD integration. I went to the existing LDAP Directory integration and I can't choose to sync Directory URI with MSRTCP... or email. I am forced to create a new LDAP directory so I can have the option to choose. Fair enough I said... I will create another one pointing to the same AD. I did that and then I was going to delete the old LDAP directory. It gives me a warning that all users that were created with this LDAP integration will be deleted. Yikes!!!
I'm stuck. Should I sync the new LDAP directory with the URI (which is pointed to the same AD as the old one) then delete the old LDAP Directory? Will my users stay intact?I found a note in the documentation that expkained that MSRTCSIP... URI needs to be populated manualy or if the user was/is a Lync user it is populated automatically by Lync. Easy fix was add all users as Lync users then delete users as Lync users and then the AD attribute stays populated.
-
CUCM upgrade 8.6 to 10.5 7500 user OVA
Hello,
I'm planning a CUCM upgrade from version 8.6 to 10.5 (both virtualized) This was deployed using the 7500 user OVA. In 10.5, the HDD requirement has changed from 2x80 to 1x110. According to the upgrade guide, I can resize my drives using disk expansion COP file. My question is, what should the end result be of my drive changes? Do I change both drives so I end up with 2x110 or do I only change one leaving me with 1x110 and 1x80?
I don't have enough CPU resources to create new VMs and migrate using PCD.
Thanks,
GlennHi Glenn,
My understanding is that the COP file is used to regain used space within the VM in the sense that you do not have enough space to proceed with the upgrade to 10.5. The COP file essentially removes your inactive partition in order to gain that needed space. As long as there is enough free space to complete the upgrade I wouldn't modify the drive structure of the VM in question.
Hope this helps
Tony
Please rate helpful posts -
Does an CUCM upgrade affect the device defaults?
Hello
we intend to do an CUCM upgrade from 9.1(2) to 9.2(2)SU2a.
However, our phones have the firmware 9-4-2-1S, different from the original firmware (9-3-1-SR2-1)
After the CUCM upgrade, will the device defaults get back to its original firmware version (9-3-1-SR2-1) or the current version will be kept?
Thank you
MarcosHi Marcos,
Yes, When you upgrade to a newer version of CUCM the phones will upgrade/downgrade to the Firmware version listed in the readme doc for the CUCM upgrade version as I have linked below. So in your case the the CUCM readme for 9.1(2)su2 is shown here;
http://www.cisco.com/web/software/282074295/116350/cucmreadme912su2a.pdf
In 9.1(2)su2 it looks like the Device defaults would be 9.3(1SR4.1) but it looks like the Device defaults in CUCM 9.1(2)su3 would be the same as what you are currently running so you would be good to go as they are 9.4(2.1) ;
http://www.cisco.com/web/software/282074295/122683/cucm-readme-912su3.pdf
You could also copy the current device defaults into something like notepad and re-enter them after the upgrade, but if it were me, I would go with the later CUCM version 9.1(2)su3.
Cheers!
Rob -
Problem in upgrading from CUCM 8.5.1 to CUCM 8.6.2
Unable to upgarde cucm 8.5 to 8.6 ,
installed referesh upgrade cop file . tried on SFTP and using local DVD same below error displayed . Any one have any solution please share .
Installation Status
File
UCSInstall_UCOS_8.6.2.21900-5.sgn.iso
Start Time
Mon Dec 10 14:31:47 GST 2013
Status
Error encountered: An unknown error occurred while accessing the upgrade file.
12/10/2013 13:44:37 file_list.sh|Starting file_list.sh|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|SFTP command complete (0)|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|List file (pre-filtered):|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) ciscocm.refresh_upgrade_v1.1.cop.sgn|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|/opt/cisco/install/bin/filter file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|No patch type specified. Optional.|<LVL::Debug>
12/10/2013 13:44:38 filter|No upgrade mode specifed. Optional.|<LVL::Debug>
12/10/2013 13:44:43 filter|Processing filter candidate names|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "UCSInstall_UCOS_8.6.2.21900-5.sgn.iso"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|INorOUT=IN UCSInstall_UCOS_8.6.2.21900-5.sgn.iso: Filter passed.|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "ciscocm.refresh_upgrade_v1.1.cop.sgn"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern Signed Standard upgrade patch file (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop\.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter|INorOUT=IN ciscocm.refresh_upgrade_v1.1.cop.sgn: Filter passed.|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|List file (post-filtered):|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <?xml version="1.0" encoding="UTF-8"?>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="patch" secure-file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" version="8.6.2.21900-5" file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="cop" secure-file="ciscocm.refresh_upgrade_v1.1.cop.sgn" version="0.0.0.0-0" file="ciscocm.refresh_upgrade_v1.1.cop" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|success|<LVL::Info>
12/10/2013 13:44:45 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Get //UCSInstall_UCOS_8.6.2.21900-5.sgn.iso size via sftp|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Size of file obtained from sftp is 4793341952|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Total space needed is 9586683904|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Check free space|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Free space : 25916985344|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Space needed : 19827077120|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Remote SFTP request complete (0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|success|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|Unmount DVD|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:45:08 upgrade_get_file.sh|source_dir=/, dest_file=/common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Starting SFTP|<LVL::Debug>
12/10/2013 14:29:34 upgrade_get_file.sh|Mount /common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso on /mnt/source|<LVL::Info>
12/10/2013 14:29:34 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
12/10/2013 14:29:34 upgrade_get_file.sh|Create md5 "/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso.md5"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|MD5(/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso)= e8:da:df:9a:3a:61:ee:27:4d:c5:4f:7b:77:78:bc:f1|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|Authenticate file "/common/download/8.6.2.21900-5/checksum_file.sgn"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|authenticating ISO name, filename=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, isoname=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
12/10/2013 14:30:49 upgrade_get_file.sh|Checking for preflight script|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Executing preflight script: /mnt/source/Cisco/install/bin/preflight isolocation=/mnt/source|<LVL::Info>
12/10/2013 14:30:49 preflight|Starting preflight|<LVL::Info>
12/10/2013 14:30:49 preflight|Validate preflight data|<LVL::Info>
12/10/2013 14:30:49 preflight|Preflight data validation complete|<LVL::Info>
12/10/2013 14:30:49 preflight|Determine upgrade type|<LVL::Info>
12/10/2013 14:30:50 preflight|Active RH version = 4AS|<LVL::Debug>
12/10/2013 14:30:50 preflight|New os version(xml) = 5Server|<LVL::Debug>
12/10/2013 14:30:50 preflight|HW model = VMware|<LVL::Debug>
12/10/2013 14:30:50 preflight|Upgrade type = RU|<LVL::Debug>
12/10/2013 14:30:50 preflight|Obtain product type|<LVL::Info>
12/10/2013 14:30:53 preflight|Obtained product type CallManager|<LVL::Info>
12/10/2013 14:30:53 preflight|Processing preflight install mode|<LVL::Info>
12/10/2013 14:30:53 preflight|Set preflight cancel utility|<LVL::Info>
12/10/2013 14:30:53 preflight|Execute install preflight commands for CallManager:RU from /mnt/source/Cisco/install/preflight.xml|<LVL::Info>
12/10/2013 14:30:53 preflight|Found 10 preflight commands to execute|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (1/10): mkdir -p /common/preflight/CM/RU|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (2/10): cp -f /usr/local/platform/conf/dynamicConfig.xml /common/preflight/CM/RU/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/platform/conf/dynamicConfig.xml': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (3/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp /common/preflight/CM/RU/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (4/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp /common/preflight/CM/RU/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (5/10): cp -f /mnt/source/Cisco/install/dynamicConfig_RU.xml /usr/local/platform/conf/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (6/10): mkdir -p /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (7/10): cp -f /mnt/source/Cisco/install/dynamic_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (8/10): cp -f /mnt/source/Cisco/install/install-confirm-content_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (9/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/dynamic_RU.jsp dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Source dir/file = /mnt/source/Cisco/install/dynamic_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Destination file name = dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Execute preflight command (10/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/install-confirm-content_RU.jsp install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Source dir/file = /mnt/source/Cisco/install/install-confirm-content_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Destination file name = install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Exiting with result 0|<LVL::Info>
12/10/2013 14:30:54 upgrade_get_file.sh|preflight rc=0|<LVL::Debug>
12/10/2013 14:30:54 upgrade_get_file.sh|Preflight completed successfully|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|success|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes done
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling inactive side processes
12/30/2014 14:31:50 sd_cancelInstall.sh|Canceling inactive side processes done
12/10/2013 14:31:55 upgrade_install.sh|Starting Upgrade -- upgrade_install.sh|<LVL::Info>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/usr/local/platform/bin/startcsa status|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|(CAPTURE) Cisco Security Agent is running with pid 23124|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/etc/init.d/ciscosec stop|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|(CAPTURE) Stopping ciscosec: [ OK ]|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|Upgrade the system|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Start upgrade manager|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|/common/download/8.6.2.21900-5/upgrade_manager.sh type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Cleanup data from a prior upgrade attempt|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /grub/boot/grub/grub.conf.recovery|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate upgrade partition|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Clean up rpm any stale __db. files in rpmdb on the to side|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any master RPM from /partB|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /partB/etc/opt/cisco/install.conf|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate any product configuration file|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|upgrade_type="upgrade"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|L2 upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Calling "source /mnt/source/Cisco/install/bin/install_func"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check for Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check if /mnt/source/upgradeConfig.xml exists|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Checking RedHat release version (4AS, 5Server)|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initiate Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Copy /mnt/source/Cisco/install/bin/refresh_upgrade to /common/download/8.6.2.21900-5/refresh_upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Check that /common/download/8.6.2.21900-5/refresh_upgrade exists and is executable|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Calling exec /common/download/8.6.2.21900-5/refresh_upgrade type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|No 'to' version specified. Extracting it from base path.|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|NEW_VERSION updated to 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Refresh Upgrade Starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|IOWAIT monitor starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Checksum the upgrade source on /mnt/source|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Calling sha1sum -c /common/download/8.6.2.21900-5/checksum_file|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Checksum complete|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize staging area|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize globals for hard drive|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Calling rm -rf /common/refresh_upgrade /common/component|<LVL::Debug>
12/10/2013 14:34:23 refresh_upgrade|Copy /mnt/source to /common/refresh_upgrade|<LVL::Info>
12/10/2013 14:34:23 refresh_upgrade|Execute find /mnt/source and cpio to /common/refresh_upgrade. This may take several minutes.|<LVL::Debug>
12/10/2013 14:37:31 refresh_upgrade|Copy source files to staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Initialize staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Prepare Refresh Upgrade support directory|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Make /common/mnt/product_img mount point|<LVL::Info>
12/10/2013 14:37:32 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup support directories|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling mkdir -p /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Create /common/cisco link to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/download/8.6.2.21900-5/Cisco /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Copy files from /common/refresh_upgrade/images/product.img to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling mount /common/refresh_upgrade/images/product.img /common/mnt/product_img -o loop|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/iproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/iproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihardware.sh /common/download/8.6.2.21900-5/Cisco/bin/ihardware.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihistory.sh /common/download/8.6.2.21900-5/Cisco/bin/ihistory.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/xproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xcomponent.sh /common/download/8.6.2.21900-5/Cisco/bin/xcomponent.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xplatformconfig.sh /common/download/8.6.2.21900-5/Cisco/bin/xplatformconfig.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/install_emailer /common/download/8.6.2.21900-5/Cisco/bin/install_emailer|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/component_install /common/download/8.6.2.21900-5/Cisco/bin/component_install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup install information in /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/refresh_upgrade/Cisco/install /common/download/8.6.2.21900-5/Cisco/install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Setting up cisco specific enviroment|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|PATH=/common/download/8.6.2.21900-5/Cisco/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/home/sftpuser:/root/.security|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|LD_LIBRARY_PATH=/common/download/8.6.2.21900-5/Cisco/lib:/opt/cisco/install/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|PYTHONPATH=/common/download/8.6.2.21900-5/Cisco/python:/usr/local/cm/lib:/usr/local/cm/lib:/usr/local/cm/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_CONF_PATH=/common/download/8.6.2.21900-5/Cisco/install/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_BIN_PATH=/common/download/8.6.2.21900-5/Cisco/bin /opt/cisco/install/bin /usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_PLATFORMCONF_PATH=/common/cisco /usr/local/platform/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_LIB_PATH=/usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Set logging globals for upgrade|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Before: ILOG_CONTEXT="Upgrade", ILOG_FILE="/var/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/var/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|After: ILOG_CONTEXT="Upgrade", ILOG_FILE="/common/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/common/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Initialize APIs|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Initializing the product API|<LVL::Info>
12/10/2013 14:37:37 refresh_upgrade|Initializing the hardware API|<LVL::Info>
12/10/2013 14:37:38 ServerApiManager|INITIALIZE: sam_legacy_mode_init=1|<LVL::Debug>
12/10/2013 14:37:46 ServerApiManager|INITIALIZE: sam_hssi_mode_init=0|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initializing the history log API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xplatformconfig API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xproduct API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "source /common/download/8.6.2.21900-5/Cisco/install/setup/utils.sh"|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions complete|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Getting deployment ID from active side|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Copy /usr/local/platform/conf/platformConfig.xml to /common/cisco/platformConfig.xml|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "cp /usr/local/platform/conf/platformConfig.xml /common/cisco/platformConfig.xml"|<LVL::Debug>
12/10/2013 14:37:48 refresh_upgrade|Check if the upgrade is allowed|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Validate hardware for the upgrade|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Hardware is supported for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate hardware for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Hardware is supported for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate from version 8.5.1.10000-26|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Upgrade from 8.5.1.10000-26 allowed|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate free space for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|(CAPTURE) Free space: 26040668160, Needed space: 15014745300|<LVL::Debug>
12/10/2013 14:37:50 refresh_upgrade|Free space validation complete|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Run component export scripts|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xproduct.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xcomponent.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xplatformconfig.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument export|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument mode=refresh-upgrade|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument install_root=/common/refresh_upgrade/Cisco|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument data_root=/common|<LVL::Debug>
12/10/2013 14:37:50 component_install|Run component export scripts, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "to" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "to" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "from" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "from" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize ucos "to" side version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucos available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucos|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucos export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucos export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Building the command list for ucos is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTStart|<LVL::Notice>
12/10/2013 14:37:51 component_install|Execute commands in the command list for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|No commands to execute for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:51 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucplatform available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucplatform|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucplatform export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Add "security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Building the command list for ucplatform is complete|<LVL::Info>
12/10/2013 14:37:52 component_install|Command execution for ucplatform component RTMTStart|<LVL::Notice>
12/10/2013 14:37:52 component_install|Execute commands in the command list for ucplatform component|<LVL::Info>
12/10/2013 14:37:52 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:52 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare|<LVL::Debug>
12/10/2013 14:37:52 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Parse arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Validate arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Initialize global variables|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Handle Security Information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export security information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export /etc/shadow file|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export login warning message|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export SFTP data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export DRF data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export CCM Service Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export IPSec Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|get_fips_status returning partB fips_cnf as 0|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Racoon Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Tomcat Data|<LVL::Debug>
12/10/2013 14:37:53 security_prepare|security information prepare successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Handle password information|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Export password information|<LVL::Info>
12/10/2013 14:37:53 password_migrate|Calling mkdir -p /common/component/ucplatform/etc/pam.d|<LVL::Info>
12/10/2013 14:37:53 password_migrate|password information migrate successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 platform_certs_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export platform certificates|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|exporting certmon config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform/config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|copy /usr/local/platform/conf/certMonitorConfig.xml /common/component/ucplatform/conf/|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export bulk sftp config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|sftp config not available|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|platform certificates migrate successful|<LVL::Info>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 servm_export|Start servm Export processing|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/activate.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/services.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|SUCCESS: servm Export processing completed|<LVL::Info>
12/10/2013 14:37:56 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:56 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate|<LVL::Debug>
12/10/2013 14:37:56 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Export network configuration files to /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/common|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copy network configuration files|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network-scripts/ifcfg-eth0 to /common/component/ucplatform/etc/sysconfig/network-scripts/ifcfg-eth0|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network to /common/component/ucplatform/etc/sysconfig/network|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/hosts to /common/component/ucplatform/etc/hosts|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying /etc/resolv.conf to /common/component/ucplatform/etc/resolv.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying //etc/nsswitch.conf to /common/component/ucplatform/etc/nsswitch.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copy network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 network_files_migrate|Export network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:57 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Component ucplatform_cluster available on active side|<LVL::Debug>
12/10/2013 14:37:57 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Build the command list for ucplatform_cluster|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Build ucplatform_cluster export phase commands|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster export element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster script element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Add "platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Building the command list for ucplatform_cluster is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform_cluster component RTMTStart|<LVL::Notice>
12/10/2013 14:37:57 component_install|Execute commands in the command list for ucplatform_cluster component|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:58 platform_sso_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component thirdparty available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for thirdparty|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build thirdparty export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing thirdparty export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for thirdparty is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component serviceability_core available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for serviceability_core|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build serviceability_core export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing serviceability_core export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for serviceability_core is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component database available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>hi gupta ,
admin:run sql car select * from tbl_event_log
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDr iver;)
admin:run sql car select * from tbl_system_preferences
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDriver;)
restarted the below sevices
Cisco CDR Agent
Cisco Database Layer Monitor
Cisco CDR Repository Manager
Cisco CAR Scheduler
Cisco SOAP - CDRonDemand Service
Cisco CAR Web Service
while accessing cdr reporting showing below error .
------------------------------------------WARNING-----------------------------------------
* Cluster wide parameter 'Call Diagnostics Enabled flag' is set to false. Hence no QoS information will be generated on calls. If required, please configure the same from service parameter page for Call Manager service.
* Problem in determining 2M/HWM breach status. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Tbl_System_Preferences table is corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Problem in determining Loader Configuration. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
-------------------------------------------NOTICE------------------------------------------
* Problem in determining Billing Tables status. Please check the CAR DB for tables Tbl_Billing_Data and Tbl_Billing_Error.
* Problem in getting the Mail parameters. It might result in mails/alerts/notifications not been sent to CAR Administrators. Please configure this at CAR->System->System Parameters->Mail Parameters.
* Mail id for 'ccmadmin' is not available. CAR Reports/Notifications/Alert Emails might not be able to sent to this user properly. Please configure a mail id in end user configuration page.
if we apllied Restore Defaults ,geting below error
Error Code
Error Description
30029
Direct access to this screen is not allowed.
and try to access system and data base , getting below error
Error Code
Error Description
10012
Database Error. Contact System Administrator.
Does any other way to avoid cdr and do the istallation . -
CUCM, IMP and CUC upgrade from version 9.1.1 (on VMWare) to version 10.5 (on VMWare)
Hello,
I have to perform a Refresh Upgrade to 10.5 for a client who has the following UC apps on a virtual environment:
CUCM version 9.1.1
IM and Presence version 9.1.1
CUC (Unity Connection) version 9.1.1
A. I see on the CUC Upgrade document below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx.pdf
P.39 --> Change Guest Operating System after CUC Upgrade to Red Hat Enterprise Linux 6 (64-bit). But nothing about the Network Adapter.
B. I see on the CUCM 10.0 Upgrade Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.pdf
Page. 44:
Step 3: Change the configuration of the VM as needed (Guest OS, ...) Step 4: Modify the Network Adapter to use VMXNET 3 Adapter type as steps before the CUCM upgrade.
My questions would be:
1. Do I need to change the Network Adapter for CUC as well? If yes, should this be done before upgrade or after?
2. What would be the implication of not changing the Network Adapter from "Flexible" to VMXNET3?Hi csrlime,
Not sure about future issues by remaining on the flexible adapter but best practice suggests going with what the OVA requires. I performed a refresh upgrade from 8.5 to 10.5 in a virtualized environment. For CUCM and CUC I changed the Network Adapter before beginning the upgrade. The steps I took to make the network adapter change were:
1. Download a copy of the vmx file from the server(s) you are upgrading to your local machine.
2. Create a back up of that file incase you need to restore it in the future. From cmd prompt in the same folder as the download .vmx. copy "<virtual_machine_name>.vmx"
then run the following from you cmd prompt
copy "virtual_machine_namet.vmx" temp_file.vmx
findstr /V /R "^ethernet0.virutalDev.*" temp_file.vmx > "virtual_machine_name.vmx"
echo ethernet0.virtualDev = "vmxnet3" >> "virtual_machine_name.vmx"
Upload the edited vmx file to your the datastore which will replace the current. Then remove the vm from inventory and then add it back. Check your setting and the network adapter should be changed to vmxnet3 now.
Steps are from the Read Me file as an option to change it. I don't why you can't make this change during a maint window. -
Standard upgrade from CUCM 9.1(1a) to 9.1(2)
I am upgrading from 9.1(1a) to 9.1(2) and as I was reading the upgrade guide it states "You cannot install upgrade software on your node while the system continues to operate". I have always been able to stage standard upgrades on the inactive partitions of my Publisher and Subscribers without service disruption then switch versions and reboot after hours. I assume that is still the case for standard upgrades within version 9.x, but I figured I would ask the experts for clarification. Can anyone confirm that the 9.1(2) upgrade can be installed on the inactive partition without taking the node out of service.
Thanks in advance,
DeanHi Dean,
It is a standard upgrade.
When you perform a Refresh Upgrade to the latest release of Cisco Unified Communications Manager,
the system reboots several times as part of the upgrade process, and the service outage period is longer
than with traditional upgrades. Therefore, you may want to perform the upgrade during a scheduled down
time for your organization to avoid service interruptions. (The upgrade is a Refresh Upgrade when the
major OS version changes between the “from” version and “to” version. For Unified Communications
Manager upgrades to 9.1(2), the upgrade executes a Refresh Upgrade when the “from” version is earlier
than Release 8.6(x)).
you can refer release notes.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/9_1_2/CUCM_BK_C9FFFCD0_00_cucm-release-notes-912.pdf
regds,
aman -
Upgrade from CUCM and Unity 3.x to CUCM Business Edition 8.5
I'm trying to find the recommended upgrade path from CUCM 3.x and Unity to 3.x to a single CUCM Business Edition 8.5 server. As far as I can see there is no migration strategy from call manager cluster environment to a Business Edition environment. If there isn't has anyone done this and if so what steps did you take. As it stands right now I'm thinking of building it fresh but I would think there would be some more efficient way to do it. Any suggestions?
Hi Philippe
Not necessarily. If you're going to BE6K, then there should be a path to upgrade each of your applications from their current versions. As BE6K implements CUCM and CUC as separate VMs, you should simply be able to follow the well documented mechanisms to upgrade these platforms.
If you're going from Unity to CUC (any versions), then you'll need to use COBRAS for this available form the unitytools web site.
The method I've used for for CUCM upgrades (7.1(5) and higher).
1. Build CUCM under VMware at the same release as your physical appliance with same IP address and hostname (obviously put this on an isolation VLAN).
2. DRS backup current PUB and DRS restore onto new VM.
3. Upgrade new VM PUB to whichever release you want to get to following standard upgrade instructions. Note you may need to get a temporary V7 license from Cisco for this, otherwise you may not be able to upgrade (you'll receive a message saying upgrades not allowed in grace license period).
4. Rehost existing CUCM licenses. If you're going to V9, carefully check your license status before doing the upgrade. There's a few gotachs here, one recent one is that analog devices attached to VG2XX gateways now consume licenses whereas they didn't in earlier versions of CUCM.
If you're going to BE5K then it will be a manual process start to finish using BAT for CUCM, although COBRAS should work for Unity to CUC.
HTH.
Barry Hesk
Intrinsic Network Solutions. -
Hi
What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server) , please let me know the steps to what would be the backup procedures and upgrades.
Regards
GauravI'd suggest reading this guide to make sure you have prepared your environment to support 10.x first. The link below also contains the upgrade path to 10.0(1).
One of the ways you can do this is:
1/ Apply refresh upgrade cop file on all servers in cluster.
2/ Upgrade the cluster to 8.6(2). Take a backup of the cluster.
3/ Build a cluster of 8.6(2) servers on VMs, and assign them the same hostnames and IP address as the hardware cluster. (You may need to keep these on a separate network until switching off the hardware machines)
4/ Restore the backup taken from the hardware cluster on to the VM cluster.
5/ Upgrade VM cluster to 10.0(1).
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100_chapter_010.html#CUCM_RF_UA60AFAB_00 -
Upgrade from Cisco Unified CM 4.2 to CUCM 6.0
We are planning an upgrade from CUCM 4.2 to CUCM 6.0 in March, 2009. Is it significantly different? Should I try to get some training classes before upgrade? Or are functions esentially the same?
Hi Mary,
Happy 2009 my friend!
First off, if you can get some training it's always a valuable thing. That being said, functionally, the knowledge that you have gained while working with CUCM 4.x versions will carry across nicely. So you won't be working "in the dark" here. The look and feel is quite different but is not a "show stopper".
If you get some time to play in the "lab" you should be good to go.
Here is one Cisco Press book that is good for CUCM 6.x studies;
Implementing Cisco Unified Communications Manager, Part 1 (CIPT1)
Implementing Cisco Unified Communications Manager, Part 1 (CIPT1), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides the knowledge necessary to install, configure, and deploy a Cisco Unified Communications solution based on Cisco Unified Communications Manager, the call routing and signaling component of the Cisco Unified Communications solution. By reading this book, you will gain an understanding of deploying a Cisco Unified Communications Manager to support single site, centralized, distributed, and hybrid call processing models.
This book focuses on Cisco Unified Communications Manager Release 6.x. You will learn how to install and configure Cisco Unified Communications Manager, power over Ethernet switches, and gateways using MGCP. You will also learn how to build a scalable dial plan for on-net and off-net calls. The dial plan chapters of the book cover call routing, call coverage, digit manipulation, class of service, and call coverage components. This book will teach you how to implement media resources, LDAP directory integration, and various endpoints including Skinny Client Control Protocol (SCCP) and Session Initiation Protocol (SIP). Cisco Unified Video Advantag endpoint configuration is covered, in addition to, Cisco Unity® voice mail integration and basic voice mail box creation. Various user features are discussed including Presence.
Whether you are preparing for CCVP certification or simply want to gain a better understanding of Cisco Unified Communications Manager fundamentals, you will benefit from the foundation information presented in this book.
https://ciscobookstore.informit.com/bookstore/product.asp?isbn=1587054833
Hope this helps!
Rob
Maybe you are looking for
-
Long boot due to ata recognition problems [SOLVED]
As the message says my boot is taking about 10 minutes, of which 95% of the time is spent trying to recognize ata4 device. I'm using the x86_64 version of arch, which works just fine on my laptop, and on my desktop - when it boots that is. Another th
-
Very slow (glacial) performance after 10.4.10 update
Updated Mac mini 1.66GHz last night via Software Update. Initially got extremely slow reboot and finder performance. Tried many things ie safe boot, repair permissions, reset pram, and even reinstall via Combo Update but all to no avail. It has been
-
Printing Black and White in Adobe Acrobat Pro 9
Hi there, Can somebody please explain how to print my color pdfs as B/W so I'm not wasting my colour ink. I have tried many of the different settings but it keeps on going back to it's default? Thanks.
-
I bought a sound blaster audigy SE, and the front 2 speakers are the only thing that played music even though when i click test the voice went through each speaker, and updated it and now when i select 5. nothing happens the picture that i gives only
-
Nokia E5-00 Issue- Camera takes pictures of less r...
Hi, on my Nokia E5-00 I am experiencing when I take a photo it is whitish and ugly comparing to the quality in the standby mode of the camera. Does anyone know what do I need to do in order to fix this? Thanks!