CUCM using Vmware harware version 9 on UCS

Hi
Does anyone knows if CUCM is compatible with VMware Hardware version 9 on UCS?
Regards,
- Alex

What do you mean by VMware hardware version 9?
CUCM is compatible with VMWare as of CUCM version 8.0 and all compatibility information is found here:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements
HTH,
Chris

Similar Messages

EBS Install on OEL 5.4 using vmware fails with RC-50004 RW-50010

Hello ALL,
I am trying to install EBS R1212 on Linux OEL 5.4 using vmware on windows xp pro and i am getting the below err in Please help...
I tried the setup with R1212 x86 and R1212 x86-64 on vmware i am getting the same error with both versions... can you please help/assist..
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = /home/oracle/EBS/startCD/Disk1
Thanks,
Arshad

Thanks...
I am installing R1212 i did not find any userful info...
I am trying disabling oom how to disable it in OEL 5.4 echo “0? > /proc/sys/vm/oom-kill (turn off) there is no such file....
also i am tying couple of things like...
# sysctl vm.lowmem_reserve_ratio
vm.lowmem_reserve_ratio = 256 256 32
Thanks for very quick reply... I hope it goes through this time..

CUCM and UCCX JTAPI version 7.1(5) vs 7.1(5b)

Wondering if any one has CUCM 7.1(5) running with UCCX and what JTAPI version is being used? Then if anyone is running CUCM 71(5b) and if what version of JTAPI is being used? Running into bug on CUCM 7.1(3) CSCtb77537 and need to upgrade.

Hi
I recently had a cust with this problem on 7.1(3); upgraded them to 7.1(5) and all was well afterwards.
The version of JTAPI you use is the version of JTAPI that comes with whatever CCM version you install; so no point getting hung up on that - just remember to ensure all your JTAPI apps have their version upgraded to match (as with any TAPI apps).
Regards
Aaron
Please rate helpful posts..

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Switching between OS 10 and Windows 8 using VMware

Using an earlier version of Mac OS, I always used a Spaces window to load VMware Fusion. I could easily switch between OS and Windows by pressing the command and arrow keys. With Spaces no longer available, is it possible to switch between OS and Windows using only the keyboard? Thanks.

What version of the OS are you running. If 10.7 or later, Spaces have been replaced by Desktops, which can be added just like Spaces.
Mission Control - Mac Basics
Mission Control Preferences

VMWare Fusion version 3.1.3 compatible with MAC OS X Lion

Hi, does anybody know if VMWare Fusion version 3.1.3 is compatible with MAC OS X Lion? I need to emulate windows 7 on my mac. Thanks!

Hi Andreas
Your message prompted me to have a quick check at my own VM network settings. I've got a Win7 BootCamp partition based VM, and 2 Linux VM's running DocuWiki and Squiz. On each of these I'm using bridged connections without issue. After my initial problem with Fusion after my upgrade my VM network connections had changed to NAT. All I had to do was change these back and specify Ethernet as the transport (I'm not one for using autodetect settings).
It may be that your DHCP server is needing a reboot. I've got a Netgear router on my network here that acts as my DHCP source and I have on occasion had to restart that to kickstart IP address allocations again. I would try putting your Linux VM back to bridged networking and setting a manual IP address from your main networks IP range. If that gets you on to your main network, then I'd try a restart on the DHCP server.

Installation using VMWare

I want to install mysql, tomcat and idm on my windows xp laptop. i'm thinking of using vmware. i have 2 questions.
1) do you know of any installation instructions on how to do that?
2) i have 1 gig of memory, is that enough?

Hi,
there are no specifiy requirements to run IDM inside a VM. Just follow the instructions from the installation guide for your guest OS.
As far as the memory is concerned it depends what guest OS you use and what you try to do with your IDM installation.
If the guest has a small memory footprint (for example linux without X and unneeded demons running) you should be able to have the VM limited to 256MB RAM and still be able to dedicate a lot of that to IDM.
IDM as such can be run with an Xms of 64MB - but if you do that operations on big numbers will fail. Mostly it limits the numbers of accounts you can handle or the number of audit log entries you can report on at a given time.
Personally I do not use VMWare for this purpose anymore(there are many other things that I use it for tho). I have a Java SDK installed on my Windows XP and built "Standalone Packages". These are Rar archives if not currently used or folders that contain a mysql(set up NOT to run as a service) or a hsqldb repository, a tomcat servlet engine and an IDM installation.
The lh.bat's are modified like described here:
http://forum.java.sun.com/thread.jspa?threadID=5189287&tstart=0
and I have batch files for starting the webapp and BPE.
That way I am able to have an IDM environment for every customer and for every version of IDM used by customers on my laptop without spending gigabytes for virtual machines. If such a package is stripped from documentation, binaries for other platforms,... it may end up beeing about 100 MB in size.
Regards,
Patrick

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can no longer import pictures to my ibook (OSX version 10.6.8) using iphoto 09 version 8.1.2 and now get message that file is in an unrecognizable format. What is wrong? Same camera as before.

I can no longer import pictures to my ibook (OSX version 10.6.8) using iphoto 09 version 8.1.2 and now get message that file is in an unrecognizable format. What is wrong? Same camera as before.

Julesvernet
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

i have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC. You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop. You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines. You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows on your Mac if you installed and ran BootCamp or Parallells.

I am using the latest version of Mozilla Firefox for 64 bit Windows 7 in Verizon Yahoo Mail. My problem is that when I click on an email and scroll through it to read it the whole screen below the tool bars scrolls together. This is wrong.

I am using a Beta version of Firefox.

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

Hello Sandra,
The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
Mac OS X 10.6: Recovering items using Time Machine and Spotlight
http://support.apple.com/kb/PH6379
Sincerely,
Allen

Aperture 2.0 Activation Key does not work after using older trial version

I was using the installed trial version of Aperture 1.5+ in my recently purchased MacBook Pro Duo (December 2007). After using the trial version for 30 days I debated whether to take the plunge ...and then within a few days recieved word that v2.0 was out at 199$. That motivated me ...however, here I am nearly one week later without ability to activate a full blown version of 2.0.
I recieved the activation key, but it doesn't accept it in the dialog to upgrade in the trial version. Hint seems to be that it is not a serial number I am entering but an activation key.
I did not order a boxed version, so what do I do now? Support is not too helpful as I have searched Apple's website and have no clue as to where to go.
Last resort ... I want my $199 back!

did you download the trial for Aperture 2

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2

I keep receiving this message "You can't open your current photo library using this version of iPhoto" You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."

I keep getting this message. What do I do? You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.

https://itunes.apple.com/ca/app/iphoto/id408981381?l=en&mt=12

CUCM using Vmware harware version 9 on UCS

Similar Messages

Maybe you are looking for