Cumulative balance (FC) show ****, can perform query?

Dear Experts,
Hi,
In the Chart of Accounts -> Account Balance, the cumulative balance (FC) column shows **** when there
are multiple foreign currency transactions being posted to the GL account.
I understand that this is a standard system behaviour but is there a way or any workaround to find out how much balance for each foreign currency in the account?
Is it possible do in query to add up all foreign currecy amount?
Thanks.
Regards,
Danny

Dear Danny,
This is not only a standard system behavior but also the only way to display.  Simply because, the number stand for different values that could not be added together.
You may create a query based on each individual FC to get separate meaningful totals.
Thanks,
Gordon

Similar Messages

  • Cumulative balance (FC) shows **** in GL report by Account

    Hi,
    In the General Ledger report by Account, the cumulative balance (FC) column shows **** when there
    are multiple foreign currency transactions being posted to the GL account.
    Understand that this is a standard system behaviour but is there a way or any workaround to find out how much balance for each foreign currency in the account?
    Besides Export to MS Excel from GL report, please advise any other proposed  solution.
    Thank you in advance.
    Best regards,
    Priscilla

    Hi Thanga Raj.K,
    Thank you for your response and the proposed solution.
    The GL report i am referring to is by Accounts and NOT by Business Partners. Anyway, I agreed with you to write query report to cater for the report limitation.
    Thanks
    Priscilla

  • Calculate cumulative balance in the PCA query

    Hello All
    1. I have a requirement where I have to calculate the 'Cumulative Balance' at a G/L Account, Fiscal Year/Period Level for PCA data.
    2. I am not able to find any source field in R/3 so that I can simply enhance the 0EC_PCA_3 extractor and get it into the PCA cube.
    3. The basic logic is:
                    I have 0CREDIT and 0DEBIT KFs in my cube.
                   The difference of  0CREDIT & 0DEBIT = Balance (ie. credit + debit)
                 But, Cumulative Balance (say for period 1/2010) = Balance for 1/2009 + Cumulative balance for 12/2008 (year end)
    Another ex, Cumulative Balance (say for period 2/2010) = Balance for 2/2009 + Cumulative balance for 1/2009       
    (NOTE: If we go back to the first period when SAP went live in this company, ex: 01/2002 then will see that the:
                       Cumulative balance for 01/2002 = Balance for 01/2002 + 0 (since there is no prior ***. balance)
    4. I can clearly see that I cant do this in the cube by using ABAP, since its granularity goes to Accounting Doc, Material level (ie item level).
    5. So I have to do this on the fly in the BEx Query, by writing a customer exit. I dont think simple offsetting variables would work either.
    Can anyone give me a possible solution to the above problem?
    Regards.

    hi is your problem solved , if so please describe here.
    now i am having the same problem

  • Router can perform static route load balance

    Dear All
    I am not sure a question. I need your idea and help. The question is if the router can perform static route load balance. I tested it. The result showed No. If you have any experience on it, could share it with me. I also post my result here. Thank you

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Normally they can, but you generally need different next hops.  How did you "test".

  • Difference in Cumulative balance amount of ERP and BW query report

    Hi all,
    We have a report to display the Cumulative balance amount based on G/L account.
    The issue we are facing here is, when we check a May month's cumulative balance in ERP side ( using Transaction code FAGLB03 by giving G/L account number, Company code and Year as 2010) we are getting 1000 EUR, and the May month's Balance is 300 EUR.
    When we run our Qury report in BW side for the same conditions( same G/L account, Key due date as 31.05.2010 and same Company code) we are getting the Cumulative Balance as only 900 EUR. we are missing some 100 EUR in our report for our Cumulative balance. But,When I check the Cube on which our Query report runs, I could get the May month's balance as 300 EUR.
    Kindly help me to rectify this issue.
    Thanks.
    Regards,
    Jayaprakash J

    Hi,
    Check is there any restrictions are there . the data must be displayes if the data is there in infocube.
    Regards
    sivaraju

  • Cumulative Balance (FC) not showing (********)

    After posting a Journal Entry in a different currency the cumulative balance (fc) just show "*******"
    The account is setup as a multiple currency account and we have the exchange rate setup for that particular date. We try to reverse the transaction, but the issue continue.
    thanks.

    Hi,
    The issue reported is the standard functionality. If the G\L Account is a mutli currency account and you post enteries in different currencies, then the Cumulative balance (FC) will be '******' and upon reversal of the entry posted will not clear off the same.
    The logic is that the rows total cannot be displayed in the different currencies (say eur and usd together) so it displays '******'
    Hope it clarifies.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Cumulative quantities not showing

    Hi experts,
    I have defined following structure in BEx query designer. The cumulative balance column is not displaying correct result.
    The "cumulated" option has been selected for the formula "Cumulative Balance".
    --- Debit | Credit | Monthly Balance | Cumulative Balance |
    Jan | 100 | | 100 | 100 |
    Feb |  | | | |
    Mar | 400 | | 400 | 400 |
    Dec
    I used to have correct data displayed when there are values for the whole year (from Jan to Dec). Hence, I suspect the problem lies on the unfilled rows (Feb in this example). Besides, I used to have a result row at the bottom of the structure as well!
    1. Is there any solution to this problem?
    2. How can I display zeros (0) instead of blank for the months without values?
    3. How can I display a result row at the bottom of the structure?
    Thanks in advance for your advice.
    Regards,
    Joon

    hi,
    Instead of creating structure you can see the cumulative values at a runtime only.
    right click on the KF, properties > data cell> calculation tab -->check cumulative after applying single value.
    Calculate single value -- sum
    calculation direction -- calculate along row
    tick apply detail calculation to result
    Calculate result as -- Sum
    tick calculation based on previous calculations.
    this way the KF will show the cumulative values at runtime, you can save the view as global view and publish to users.
    This has an advantage as this is easier to do rather than defining each cell in structure.
    regards,
    Arvind.

  • G/L Cumulative Balances report

    Hi All,
    Can someone explain the G/L cumulative balances report.
    Our scenario:
    we are using a standard query 0FIGL_C01_Q0002 for this, Now when i give the fiscal year as 2010 it shows the first , second, third & Fourth quarter of 2009 with alll values populated and also shows the 2010 4 quarters with data , now the enduser says the 4th quarter of 2010 shold be zero but now values are seen.
    How can i solve the issue.
    I see that both G/L Balances & G/L Cumulative Balances are similar expect that for G/L Balances the quarters value is calculated based on the Keyfigure 'Balance ' which is the difference between debit pstings & Credit Postings
    The G/L Cumulative Balances are calculated based on the key figure Cumulative Balane.
    Please can someone give me clarity on this....

    Hi cvjen76,
    Do you have any varibale on reporting period
    1. If yes give reporting month till quarter 2010(reporting month)
    I think your working on P & L report. So your getting G/L balance & G/L cumilative is same.
    G/L balance is difference b/n debit & credit(debit-credit), where as G/L cumulative balance is difference in debit & credit for the present period & previous periods of that particular fiscal year.
    hope this will help you.
    Thanks,
    Vijay.

  • Difference between cumulative balance and line items total in FS10N

    hi,
    when I am executing FS10n, I observed that the cumulative balance amount is not equal to line items total .  This is due to some amounts in previous years are varying from the line ltem totals in those periods of previous years.
    This is not happening with QA server only Prdn server is facing this problem.  Can anybody provide me a way to solve this..!?
    Regards,
    AJo
    I have checked the master data for the GL and the check box for line item display is selected. It has not been changed for years.
    Edited by: Anil Jonnalagadda on Oct 22, 2008 10:57 AM

    Hi Anil,
    The reason for the differences that you are viewing can be various. As the differences are found in the cummulative balance then it means that the differences might have occurred in previous fiscal years. The first stetp is to find when these differences were originated: You can run report SAPF190 (in se38) for previous fiscal years, and company code in question- This report should show the differences with message "Errors" in the log. If differences are found then you have to creeate a message and send it to SAP for further analysis and corrections.(only SAP experts can do this kind of corrections - component FI-GL-GL-X)
    Also bear in mind that if you did archiving in previous fiscal years then this would not be an error:
    If you already did archiving and secondary index deletion on this accounts with SAPF048I. So this explains why line items balance and GL summary balance differ ! There is no programm error.
    See consulting note 81489 which describes this issue:
    The balance of an account results from the balance of the open items. In
    connection with an archiving that has been carried out, the line item
    display - used with cleared items - must not therefore be interpreted as
    a balance display. For the balance display, there are separate
    correspond to the display balance of the open items from the line item
    display.
    Having archived and deleted secondary indexes ( with SAPF048I )
    for an account you can not use line item drill down as a balance
    display any more for a line item managed account.
    ( as not all line items are existing any more in table BSIS ! )
    The transactions meant to display the binding balances are  FS10N,
    FK10N and FD10N.
    They also give you the line items details, but only of those line
    items not yet deleted ( by SAPF048I ).
    kind regards,
    Oscar Diaz

  • Wrong Cumulative Balance in SBO 2007

    Dear Experts,
    I open up BP Account Balance, and notice the Cumulative Balance was accumulated with the C/D column (which is the document total for that transaction), instead of accumulating it from the Balance Due column which shows unreconciled balance due.
    I have found SAP Note describing this problem as a definition. But logically, I will think that the term BP Account Balance is suppose to mean the balance due for that BP, instead of total  of every transactions related to this BP (Which the system defines it currently). Can anyone explain to me the idea between this system definition.
    And if nothing can be changed in SAP now, is there a work around to find out the "REAL" cumulative balance due for a BP, that is how much "unreconciled" due balance do they have?
    Please help and advice. Much Thanks!
    Warmest Regards,
    Chinho

    Hi,
    As you are aware that the version 2007 had the option of partial reconciliation which was earlier not available in the 2005 version. Therefore, in 2005 Version, the cumulative balance was displayed as balance due field accumulation.
    However, in version 2007A, due to partial reconciliations being available, the balance due does not display the correct balance, hence the cumulative balance displays the total of the C\D fields.
    The same is the logic and the working which is explained in note no. : 1128828 as well.
    Hope it clarifies.
    Kind Regards,
    Jitin
    SAP Business One Product Support

  • Cumulative balance - which table?

    Hi there, I am writing a fairly simple query from JDT1, but i can't find the cumulative balance column in either ODJT or JDT1. is it in a different table or is there a formula i should write?
    thanks, my example query is below:
    SELECT T1.[TransId], T1.[Account],  T1.[CreatedBy], T1.[ContraAct], T1.[LineMemo],  T1.[Credit], T1.[Debit], T1.[DebCred], FROM [dbo].[JDT1]  T1 INNER JOIN OJDT T2 ON T1.TransId = T2.TransId WHERE T1.[Account]  = '[%0]' and  T1.[RefDate] between '[%1]' and '[%2]'

    Hello Groovy,
    You can use the word SUM to sum the different values.
    E.g. this sums the values of both credit and debit side and it was used in the query generator:
    SELECT  sum(T0.[Debit]) + sum(T0.[Credit]) FROM JDT1 T0  INNER JOIN OJDT T1 ON T0.TransId = T1.TransId WHERE T1.[TransId]  = '95' group by t1.transid
    or if you want the total of the column you can use:
    select SUM (debit) from jdt1 where transid = 'XXX'
    and it will sum the total of debit for that transid.
    Please, let me know if the information helped you. If not, can you please give us more information about what you need?
    Thank you.
    Marcella Rivi
    SAP Business One Forums Team

  • Different Balance Due and Cumulative Balance

    Hi Experts,
    My Client, SBO 8.8 PL17, are experiencing an issue where the balances differ from the balance due screen and the cumulative balance.
    There are 2 closed invoice showing in the cumulative balance window as well as on Ageing report. These 2 invoices was closed with Credit Notes, both are linked to the target credit, on the actual invoice it shows as closed, the applied transactions clearly states that the doc is closed. In the DB, the INV1 lines for the invoice is also closed.
    For some reason it just doesn't want to pick up that the invoice is linked to the credit.. The credit is not displaying though.
    I have have read through notes but none of them have the same issue as this, they are all related to partial payments, which is not the case here.
    If anyone have any suggestions, please let me know.
    Kind Regards,
    Wynand.

    Hi,
    Kindly check the following query whether the same gives any result :
    select * from OINV t0 inner join JDT1 t1 on t0.transid=t1.transid and t1.account<>t1.shortname
    where t0.docstatus='C' and (t1.BalDueDeb+t1.BalDueCred)<>0
    Also, check the INV6 table and the values displayed therein for the paidtodate and paid fields.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Displaying Cumulative Balances in BA Balance Sheet Report Painter Reports

    Dear SAP Gurus,
    The system has Business Area Balance Sheet reports created in Report Painter. But in General Data Selection when I select period as a full fiscal year then the cumulative balances are shown. But if I wish to see the reports for a period or a quarter the opening balances for that period are not shown. And only the figures pertaining to that period are shown. Can someone tell me why this is happening like this? I wish to see the cumulative balances even for these periods. Please help me.

    Hi
    You can achieve through SELECTIONS. do like this suppose you have the line item called Inventory(this inventory will capture the data from two or three GL accounts say ex: 123,456,789).you can create the selection with the name inventory and use these GLaccounts in that.when you see the report it will show
    Invantory            $1000
    Share Capital     $2000
    Deposits            $3000
    when drill down it will shoe GL account wise also.
    Regards,
    chandra.

  • Cumulative Balance & P/L Reports

    I have to create two sets of reports on cumulative balance and P/L based on my general ledger cube. How would i do that. Which Key figures should i use for each of them. I need to have them with a month-to date, quater to date and year to date looks.
    Thanks,
    Neha

    Look at the reports 0FIGL_VC1_Q0001  / 0FIGL_C01_Q0050  from the content. Also if you use New GL, then look at the report 0FIGL_C10_Q0001.
    Report 0FIGL_VC1_Q0001 should give you balance sheet. Since you need to see monthly, quarterly and yearly view, try to put restrictions on the time characteristics in the query. Even if this report does not suit your needs, you can still the data in the cube 0FIGL_C10, as it has all the balances of GL accounts at a given point in time.
    Ravi Thothadri

  • ? Mail [12721] Error 1 performing query: WHERE clause too complex...

    Console keeps showing this about a zillion times in a row, a zillion times a day: "Mail [12721] Error 1 performing query: WHERE clause too complex no more than 100 terms allowed"
    I can't find any search results anywhere online about this.
    Lots of stalls and freezes in mail, finder/os x, and safari -- freqent failures to maintain a broadband connection (multiple times every day).
    All apps are slow, cranky with interminable beach balls getting worse all the time.
    anyone know what the heck is going on?

    Try rebuilding the mailbox to see if that helps.
    Also, how much disk space is available on your boot drive?

Maybe you are looking for