Cupsd's bootstrap server port not found

I've got both Samba and CUPS turned off at startup, yet I get this recurring error in the system log:
Dec 12 19:07:12 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:14 /usr/sbin/smbd: cupsd's bootstrap server port not found
I kill smbd but it starts up again, apparently thanks to /usr/libexec/launchproxy
I'm using the default configuration files for Samba and CUPS and there is no printer set up. Using OS X 10.4.3 (not Server). repaired permissions.
this is driving me nuts...any suggestions welcome.

I get that response all the time, it doesn't seem to have any relevance to anything and as far as I can tell, doesn't impair the functioning of my machine.
sometimes, too much information is too much information...
Miriam

Similar Messages

  • Servermgrd: cupsd's bootstrap server port not found

    This issue was posted last fall, but no one had ever posted with a solution to it. About every 2 minutes in /var/log/system.log, I get the following message:
    servermgrd: cupsd's bootstrap server port not found
    This is on an Xserve running 10.4.5. No printers are attached or will be. I'm not sharing any printers either.
    Again, its just an annoyance, but why is something logging to system.log if its not actually a problem?

    same prob here. really annoying. ever find the cure?
    -ed

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
    server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
    How Can i solve this?

    1. Make sure SQL Server Service is running
    2. If a named instance, make sure SQL Server browser service is running
    3. Make sure SQL Server is configured to allow remote connections
    4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
    5. Test server connectivity with PING from the client machine
    6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine.  For example
    a. TELNET <server-name> 1433
    b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
    7. Check firewall settings if step 5 or 6 connectivity test fails
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • PI MDM Adapter Error - MDM port not found

    We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
    In RWB - Communication Channel Monitoring
    MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
    In RWB - Message Monitoring
    2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
    2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
    2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
    2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
    Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
    Anyone experience this same issue?

    We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
    In RWB - Communication Channel Monitoring
    MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
    In RWB - Message Monitoring
    2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
    2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
    2009-09-11 14:04:15 Information Message successfully put into the queue.
    2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
    2009-09-11 14:04:15 Information The message status was set to DLNG.
    2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
    2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
    2009-09-11 14:04:15 Information The message status was set to DLVD.
    I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
    Edited by: Chris Williar on Sep 11, 2009 9:56 PM

  • Why wlserver_10.3\server\lib not found?

    Hello, I was following a cue card in Jdev to install the database schema when I got this error:
    BUILD FAILED
    C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
    C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
    C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
    C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\DBSchema\build.xml:28: C:\Oracle\Middleware\jdeveloper\wlserver_10.3\server\lib not found.
    Line 28 is this:
    <sql driver="${jdbc.driver}" url="${jdbc.url}" userid="@{username}"
    password="@{password}" classpathref="oracle.jdbc.path"
    src="@{script}" onerror="@{onerror}"/>
    So does this mean the JDBC driver path is incorrect? I have installed the whole JDev suite and Oracle 10g XE, so I guess the driver is not missing? How can I check this? Thank you.

    Out of the box, build.properties doesn't have those entries. I have followed these cue card steps before, on another machine, and it worked right out of the box. Does this have anything to do with the environment variables like ORACLE_HOME, ...?
    Here's build.properties:
    # Base Directory for library lookup
    jdeveloper.home=C:/Oracle/Middleware/jdeveloper/jdeveloper
    src.home=..//..
    # JDBC info used to create Schema
    jdbc.driver=oracle.jdbc.OracleDriver
    jdbc.urlBase=jdbc:oracle:thin:@localhost
    jdbc.port=1521
    jdbc.sid=XE
    # Information about the default setup for the demo user.
    db.adminUser=system
    db.demoUser=FOD
    db.demoUser.password=fusion
    db.demoUser.tablespace=USERS
    db.demoUser.tempTablespace=TEMP

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible.

    Server Error in '/' Application.
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
    System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887
    System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
    System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189
    System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90
    System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342
    System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221
    System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189
    System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185
    System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31
    System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433
    System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
    System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499
    System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65
    System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117
    System.Data.SqlClient.SqlConnection.Open() +122
    System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +31
    System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +112
    System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +287
    System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92
    System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1297
    System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +19
    System.Web.UI.WebControls.DataBoundControl.PerformSelect() +142
    System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +73
    System.Web.UI.WebControls.GridView.DataBind() +4
    System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
    System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +72
    System.Web.UI.Control.EnsureChildControls() +87
    System.Web.UI.Control.PreRenderRecursiveInternal() +44
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Control.PreRenderRecursiveInternal() +171
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
    Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

    On what website/link did you received this error message ??

  • The server was not found or was not accessible.

    I've upgraded to a Windows 8.1 machine, and installed SQL Server 2012 (version 11.0.3128.0), and SQL Server Express 2008 R2 (v 10.0.5500.0).
    I've created a database in the 11.0.3128.0 instance, and populated it by restoring it from a .BAK from another server.
    I've opened Visual Studio 2012, and accessed the database via the Server Explorer, with no problem.
    I've copied a running web app to this same machine, and opened it in Visual Studio 2012.  But when I attempt to run in debug mode, my first attempt to access the database gives me this error: 
    "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
    (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
    Here's my connection string, as defined in the <connectionStrings> section of my App.Config:
    <add name="EMSDataModelContainer"
    connectionString="metadata=res://*/EMSDataModel.csdl|res://*/EMSDataModel.ssdl|res://*/EMSDataModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=xps-8500;Initial Catalog=EMS;Integrated Security=True;multipleactiveresultsets=True;App=EntityFramework&quot;"
    providerName="System.Data.EntityClient" />
    Thanks in advance.

    Hello,
    Please read the following resources:
    http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/20d8edf8-f36d-48ac-8623-c06e485448a3/i-have-a-problem-with-a-connection-to-database-sqlserver-2012?forum=sqlexpress
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • After restoring SharePoint farm backup ( The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connection)

    Hi,
    I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error: 
    Error  
    An unexpected error has occurred. 
    Troubleshoot issues with Microsoft SharePoint Foundation. 
    Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57 
    Date and Time: 7/15/2014 11:26:35 AM 
    When i checked in log i got below error
    System.Data.SqlClient.SqlException: A network-related or instance-specific
    error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
    - Could not open a connection to SQL Server)    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
    stateObj)     at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu... 
    Thanks in advance
    Said Al Balushi

    Hi Wendy,
    i have checked all below points, every thing is fine but still i am getting the same error.
    Check SQL services are runing
    Check remote conenctions are enabled
    Check SQL Browser service is runing
    Check TCP/IP protocal enabled at SQL server
    Check out windows firewall setting
    Thanks,
    Said
     

  • SQL Server Agent Log showing errors [298] SQLServer Error: 10061, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL

    Hi All,
    I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
    Can anyone guide me what could be the problem.
    Date                      17/4/2014 2:04:20 PM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
    and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    Date                      17/4/2014 2:11:55 PM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error
    has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. [SQLSTATE 08001]
    Date                      7/4/2014 11:00:31 AM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error
    has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. [SQLSTATE 08001]

    Check this link
    http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
    Regards, RSingh

  • Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

    hi ,
    when generate the schema , i  got the below error, please any one put your inputs:
    Connecting to the LOB system has failed.  A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
    is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

    thaks shanky,
    but facing another , after generate schema from  WCF_SQL, im unable get elements in my schema.
    this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
    id, name
    <xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
      <xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
      <xsd:element name="Test.dbo.sample">
        <xsd:complexType>
          <xsd:sequence>
            <xsd:element name="id" type="sqltypes:int" minOccurs="0" />
            <xsd:element name="name" minOccurs="0">
              <xsd:simpleType>
                <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
                  <xsd:maxLength value="1000" />
                </xsd:restriction>
              </xsd:simpleType>
            </xsd:element>
          </xsd:sequence>
        </xsd:complexType>
      </xsd:element>
    </xsd:schema>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>18</id>
      <name>BIRADAR</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>18</id>
      <name>BIRADAR</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>19</id>
      <name>sw</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>18</id>
      <name>BIRADAR</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>14</id>
      <name>swe</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>13</id>
      <name>se</name>
    </Test.dbo.sample>

  • Restlet Error "The server has not found anything matching the request URI"

    I want to serve some static html pages along with my restlet services from the same app ( running in Tomcat )
    Here is my web.xml
    <?xml version="1.0" encoding="UTF-8"?> 
    <web-app id="WebApp_ID" version="2.4" 
                xmlns="http://java.sun.com/xml/ns/j2ee" 
                xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
                xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee 
                     http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"> 
       <display-name>first steps servlet</display-name> 
       <!-- Application class name --> 
       <context-param> 
          <param-name>org.restlet.application</param-name> 
          <param-value> 
             firstSteps.FirstStepsApplication 
          </param-value> 
       </context-param> 
       <!-- Restlet adapter --> 
       <servlet> 
          <servlet-name>RestletServlet</servlet-name> 
          <servlet-class> 
             org.restlet.ext.servlet.ServerServlet 
          </servlet-class> 
       </servlet> 
       <!-- Catch all requests --> 
       <servlet-mapping> 
          <servlet-name>RestletServlet</servlet-name> 
          <url-pattern>/*</url-pattern> 
       </servlet-mapping> 
    </web-app>
    Here is my Application router class
    public class FirstStepsApplication extends Application
         @Override
         public synchronized Restlet createInboundRoot()
              Router router = new Router(getContext());
              // Defines only one route
              router.attach("/hello", HelloWorldResource.class);
              router.attach("/login", LoginResource.class);
              router.attach("/", BasicResource.class);
              return router;
    }I've gone back to the basic first steps example.
    It works fine if the url pattern is <url-pattern>/*</url-pattern>
    localhost/rest/login returns a string from my LoginResource, same too for /hello
    However a static html page I have /Mypage.html does not get returned when I enter the URL /MyPage.html
    However, if I then modify the url pattern to be
    <url-pattern>/login</url-pattern>
    and then enter the url /MyPage.html I will get the html page.
    But ...... I get the error "The server has not found anything matching the request URI" when I enter the url /login which worked ok the first case.
    What must I do in order for both Restlet & Static HTML resources to work together?
    Thanks ... J

    yes, basicResource is my own class. It's a catch all for restlet requests that don't match any of the other ones. It just returns String = "My catch all resource"
    Because you highlighted it I decided to try and remove it from my Restlet Router. Presto, it now works, the login & hello requests are serviced by my Restlet resources and the MyPage.html requests are served the mypage.html file. This now brings another question. If from my servlet mapping in web.xml all urls are to be handled by restlet "/*", how then does a mypage.html request not get serviced by my restlet? Seems to be just passed through the restlet framework when there is no router to match it? what do you think?

  • When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !

    When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !

    You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
    Is this ADSL?
    Do you have the modem in bridge?
    How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported.

  • Report Application Server was not found

    Post Author: dgindy
    CA Forum: Deployment
    Product: Crystal Reports
    Version: XI
    Patches Applied:
    Operating System(s): Windows 2003 Server
    Database(s): SQL 2000
    Error Messages:  " An Enterprise Report Application Server was not found. "Steps to Reproduce:
    So we have an existing CR 9 reports application server on a different system .  We are trying to migrate over to crystal report 11 with out affecting it.  I modified our .Net web application and uploaded it to the server.  This is the error I'm currently getting.  We have Enterprise XI install on the server so i'm stumped
    Any Ideas?
    Thanks
    D

    Hi Fade,
    Ah, the SDK for CR for VS is not what you want. What you need to do is log into Service Market Place and go to the appropriate download section. The SDK is NOT installed as in previous versions with Crystal Reports Designer, it's a separate download now.
    I assume you are also using CRSE 2013 then so you get the SDK from SMP:
    Then in the list you'll see .NET installer for SP 1 or SP 2, you must use the same patch level as the Server:
    If you don't see this option then please contact your account manager to give you access to SMP and the download section.
    If you are not set up you will not be able to see the above.
    Thanks
    Don

  • MDM port not found

    Hi Friends,
    I'm doing currently MDM-PI-Idoc scenario. When I start the mdm adapter I get this error.
    MDM Adapter listener could not start due to: MDM port not found
    However I have checked PI sp level i.e 05 and MDM sp level i.e 04, will this really be a problem for happening this issue?
    How can I solve this?
    Regards
    Nag

    Hi.
    Pls now on search before on SDN. We have multiple threads about this.
    MDM Port not found error in MDM adapter for PI 7.0
    SAP PI 7.1 MDM Adapter
    PI MDM Adapter Error - MDM port not found
    MDM Adapter 7.1
    Regards.

Maybe you are looking for

  • Erro de Validação SCS = 9

    Bom dia pessoal, tudo bem? Estamos atualizando a NFE 2.0 no ambiente QAS. Após a geração da NFE, retornou o status para J1BNFE da seguinte forma: - status ação: em comunicação (rodinha) - log NFE: verdinho - status do documento: branco - status de co

  • Why doesn't my arrow keys work?

    I can not use my arrow keys. When I got into my messages and try to use the arrow keys it brings me back to the main screen.

  • Can we reduce the size of the disk having the Log files for a Dag Database

    There is an issue with disk space filling up for 4 databases part of the same DAG, each having 1 non lagged passive copy. The Disks containing the log files are from the VSphere Storage. The Disk size was temporarily expanded to avoid any outages. Th

  • Install license via C.L.I

    Hi people, I need to install the license using saplicense.exe -install ifile=. I´ve logged with user sidadm and execute this command and I get the next message error: SAPLICENSE (Release 701) ERROR ***     ERROR:   Can not set DbSl trace function    

  • PHP Code, Variables & CSS. Would this work?

    Hello, I am new to PHP, this is my first script I have made without any help, I am using xammp to test my site, but the basics of the code is this. I am adding an include code into the navigation menu and in the CSS I have defined certain rules for t