Curious about the iOS 5 software that is coming out. If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it? or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?
curious about the iOS 5 software that is coming out. If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it? or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?
Keaten wrote:
Yea I would have to say wait until the release of IOS 5, because the phone will probably run it a lot smoother. I mean go ahead and buy the Iphone 4 if you are dying to have it, because you can just update it which is no big deal at all, but it would be the smarter thing to wait for the new updates.
And the networ issue as far as I am aware is fixed on the Verizon iPhones, so it really depends on which service you have.
- correct me if i am wrong
Have to disagree here, Apple have not even announced an iphone 5, it is pointless to speculate that we will see one or not see one until Apple actually releases a statement. ios was built and tested on the iphone 4 so there will not be any slowdown or laggyness compared to a phone that has not been released yet.
If we are advising potential apple product buyers then we should not be putting them off buying a iphone 4 on speculations alone. Just because apple have for the last few years released an iphone every june/july does not mean then have to stick to this approach.
Apple have not issued any statement regarding an iphone 5, until this time it does not exist, only in heresay on the internet.
Any one looking to get an iphone 4, to you i would say waiting until ios 5 is released is a personal choice, no matter if you wait or not you will be able to update via itunes. One way or another in the future you will have to do an ios update via itunes whether this is the 5.0 software or 5,2,1.
Please note that Apple are very closed mouthed about new hardware releases and potentially a new iphone could be round the corner, however there is no evidence to suggerst this, i.e Apple have not even mentioned an iphone 5 this year anything you hear towards the contrary is media spin thus far and speculation.
ios 5 was built and tested to work seamlessly on iphone 4, the beta software released to developers is being tested on iphone 4. Please do not listen to people telling you that the iphone 4 will not run this ios as well as a phone that does not exist yet. When iphone 5 launches it will most likely have dual processors and not until its launch will the next gen apps start appearing.
Similar Messages
-
I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.
I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left. -
I have an early 2011 macbook air on 10.7.5 I want to use find my mac but it says i need a recovery partition. If i buy 10.85 will it come with a recovery partition and will i be able to use find my mac
If you are using 10.7, you should have a recovery partition, now. Installing 10.8 will install or update the recovery partition if it can. If you have a drive partitioning scheme setup that prevents the recovery partition from being added, then I don't think 10.8 will change that.
Do you have a recovery partition now? -
I am thinking of either buying the Macbook Pro retina display (15") or waiting for the iMac 27" display. I am mainly focusing on the display, so what is better?
vinay.sujan wrote:
Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?
Well there are two or three causes of eyestrain with displays different people seem to have.
1: Small type/UI elements
2: Glossy screens
3: Flicker rate
1:
The higher pixel rate combined with the display set at the higher resolution is going to cause UI and type to be smaller and harder to see. In fact it's advised to set OS X to a lower resolouton so it upscales better to match the pixel of the higher display.
Reports coming in say watching HD 1920 x 1080 trailers on the anti-glare 17" is best as the pixel content matches the display almost fullscreen, where on the MBP-R it's upscaled and thus looks blurry.
HD content makers are NOT going to change all their video cameras to support 2880 x 1800 full screen, so in order to get a clearer image playing HD 1080 content, one will have to do so in a smaller window.
2:
The new MBP-R dispalys are 75% less glossy, but not 100% less glossy like the anti-glare models so this can still cause some people problems. This can be lowered to under 1%, however I'm suspecting to do so would be considered giving up a military advantage to China where Apple gets it products made.
3:
I don't know about the flicker rate if it's better or not on the MBP-R's than the previous screens. -
If I buy an iphone 4 or 4s will it come with Ios 6 or ios 7?if it's ios 6 where can I buy it?
It depends on where you buy the iPhone. If you buy a new iPhone from Apple or an authorized iPhone reseller, the iPhone will probably come with iOS 7 unless the reseller has old stock, which could be the case for an iPhone 4 since Apple discontinued that model quite a while ago.
If you're buying from some other source, there's no way to know what version if iOS the phone will have.
Regards. -
My iPhone will not pair with any of my bluetooth devices even though it recognizes them. any ideas?
iPhone supports a limited Bluetooth profile
Check this list and your other Bluetooth devices
iOS: Supported Bluetooth profiles -
I have been given an iphone 4 from one of my friends it seem that prior to ios 7 coming out he coudnt wait so he ilegally downloaded the software and now i can't activate it as it says my iphone is not regestered please help!
Then you should talk to that person. Apple won't help you if the iOS was downloaded illegally, and since this is their community, due to Terms of Use, no one here will help you either.
-
Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?
Your phone was jailbroken. You can't get help here.
In VERY RARE circumstances, this may indicate a hardware failure. -
I had to cancel a payment that kept coming out my bank, I had no idea what it was for as it was monthly and I never signed up to anything, now my Apple ID is disabled, how can I unlock this?
If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iPad by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
For the auto-renewing subscription, there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098 -
I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?
http://support.apple.com/kb/TS1538
-
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
-
I have been trying to update to IOS 6 for 3 days now - my Iphone4S is in middle of restore and it gets so far then stops - no error messages - the bar does not move further. it stops at different places -
can anybody help please
KulbirStewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck -
Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already and it worked but i'm not sure if it the os is complete. Is It??
Restore to factory settings. That will use the latest iOS and then restore from a backup.
Never, never, never attempt an update/upgrade on any portable computer device without plugging it into its AC charger. -
I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. We are taking a long flight this week, and I wanted to have something new to watch. I've read through lots of threads on this but I can't seem to find a good solution that I haven't tried.
If I can get them to download them on my iMac computer, can I then transfer them to my iPad? How is this done? (Please pardon an older lady's ignorance, and thank you for any assistance!)
JodyHello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
If I buy iphone from carriers will it come with the same accessories/ same packaging
I am thinking of buying iPhone 5c from a carrier in Ireland and I am wondering will it come with the same packaging and accessories
unless the carrier state overwise then I would say they same
Maybe you are looking for
-
Log on to Infoview with SAP authentication
Hi Gurus , Please can some one provide me documentation , to configure , Infoview with SAP authentication . I have R/3 system where i have a datasource and then one Remote cube in BW . On the cube developed a BEx Query . I want to log into Infoview
-
HT1689 how can i get a list of purchases, like for in app purchases?
i have had issues with an app, and was asked to submit receipts for what I had bought. My app crashed with an update and beeline said they would credit my account if I had receipts. I did not save every receipt apple gave to me. Is there a way to vei
-
Disabling Menu Options on New Button in Form Library
In InfoPath form libraries on SharePoint online, I've noticed a new menu that now pops up when clicking the "new" button. I do not see a setting in the library to disable this. Is there a setting some place I'm overlooking? Thanks!
-
Few Questions About Migrating Site & Editing Many Pages at Once
OK. First things first. My manager doesn't want me listing our company name in this post since we are currently trying to get out of our hosting contract and she doesn't want to jeapordize anything in case someone stumbled across the post by a search
-
Smartforms / Font and Lanscape printing issue
Hello, I have developed a smartforms which is in landscape format. When I look at the output which is a pdf the smartform appears to ignore all of the smartstyles that are associated with it so all of the details are printed exactly the same