Currency conversion error by changing the currency

Hi all,
i am facing a problem by refreshing the query with  another currency. f.e. i am calling the report in Euro and then i say refresh variables and change the currency in USD. So i get the same values and the currency conversion dont work.
I get the following alert message after i change the currency and run the report.
Diagnosis
You attempted to convert a currency. The system cannot find a valid currency into which to convert the value.
System Response
The OLAP processor cannot convert the currency. The drilldown is not changed.
Procedure
Specify a valid target currency.
Procedure for System Administration
This message can only appear for Web templates in which currency conversion is set manually (using the SAP BW URL). If this message appears following a currency conversion dialog box, an SAP error has occurred; report this error using OSS.
Can someone help me before i open a OSS error. Thanks.

Hi,
did you check the setting  in BI for source system ?
Else just try it
RSA1 - goto source system
Expand SAP
Context Menu of Source System
There are
Global Settings
Transfer Exchange Rate
Hope it will help you ...
BVR

Similar Messages

  • Conversion error in company code currency for general costs activity

    PS Experts,
    Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
    This is the scenario
    Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
    in the third activity (General act)  in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
    note: Company code curr same as projet curr & controlling area curr
    Is there any setting is missing in customizing
    Conversion error in company code currency for general costs activity 0010
    Message no. CK443
    Diagnosis
    For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
    Procedure
    Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
    Thanks

    Hi Yassin,
    I believe you have maintained exchange rates for rate type M as per your config in OPSB.
    Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
    This will solve your problem.
    Regards,
    Kabir

  • How to change the currency of the order  while creating the sales order??

    Hi all,
    I am new to this field.I have to create a Sales Order with reference to another
    SO but with different sold to party.Here i also have to change the currency of
    order from dollar to GBP.
    Please assist me to do this.
    Thanks.
    syed

    Hi
    Goto VA01 and try to create the order with reference to the Old order
    and after that order details are copied to the New order then, change the Sold to party and the currency in the Sales order Header and see? whether it allows you to change it or gives some error? then based on that you have to check and do further processing.
    Try and see
    If it won't allows you to change
    then create a New SO with the new sold to and currency and just take the old orders data from VBAK and VBAP tables and enter into the new order fields and save it will be created.
    <b>Reward points for useful Answers</b>
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Currency conversion Error in 0sd_c15

    Hello Experts,
       I am having a problem in the ETl of the cube 0SD_C15 .Its showing Currency conversion error
    0MEANTODAY while loading data.Please help me in this regard
    Prasad

    Hi
    You will find the transfer global settings for the source system where you are extracting the data.
    Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
    Then Reload the data into the cube,
    After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
    I think, this will work....
    Regards
    Sudheer

  • Bex to Business Objects - Currency Conversion error in Webi

    Hello,
    I am attempting to transfer a Bex 7 key figure currency conversion to a Business Objects filter in a Universe for display in a Webi report.  The version of Business Objects XI 3.1 SP2.  The Bex Conversion Type is based off Calendar Month, and the Target Currency variable is a selection prompt. The filter is passed to the universe and prompts when the report is ran in Webi, but an error occurs if the currency is populated.  For instance, if I populate the filter in Webi with 'USD', the following error occurs:  The MDS query SELECT "....." failed to execute with the error Value 'USD' FOR variable "Currency" is invalid (WIS 10901).
    I'm not sure if the currency conversion information is being properly transferred and translated to Business Objects.  Does anyone have any insight on this issue?
    Thank you,
    Brock

    I was able to modify the dimension for the filter to retrieve the correct object (Ex. USD), but there are multiple incorrect selections for USD and other currency types.  For instance, when I type in USD i get 5 different options, and the one with the description 'American Dollar' is the correct one.  Why is Webi displaying all these different options?  When I display the options for currency in Bex only one 'USD' is shown in the list.   Here is my filter condition for currency type in the Universe:
    <OPTIONAL><FILTER KEY="[SELCUR]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Select Currency','A','Organization\Cur Key',mono,primary_key)"/></CONDITION></FILTER></OPTIONAL>
    Cur Key is my customized hidden dimension
    Thank you

  • Unable to create shopping cart due to currency conversion error.

    Hi,
    We are currently working in a extended classic scenario. We have about 8 users connected under a common entity ( dept). Out of which for one user (user1) we are able to create the shopping cart and able to run the entire procurement cycle the entire cycle.
    When we are trying to create a SHC with any other user ( user2 to 8)  its giving the errors like
    1) Currency Conversion Error ( to GBP). Please inform help desk.
    2) Error in account assignment for item 0.
    Attributes for all the users ( user1 to user8) are same and we are not getting any error in the attribute check as well.
    Please suggest.

    Look up note 419423 + related notes to repair incorrect SRM users. What you report sounds a bit strange. A debugging session might be helpful too. Especially the 2nd error looks like something 'home-made'...

  • How can you add/change the currency rate in spro?

    Hi all,
    you can add a new currency code by going to spro --- general settings --- check currency codes
    for example: PERU ---> PEN
    But, how can we add/change the currency rate PEN in spro?
    for example: Peruvian Nuevo Sol     = 4,3567619
    Is it still in customizing? And if so, where can i find it?
    Many thanks in advance.
    Kind regards,
    Pamela.

    Hi Aman,
    I have entered the field to add the new currency rate.
    But the system doesn't want to valid my new rate.
    I get the following error message:
    "Input should be in the form ._,____ "
    Do you know how to override that command?
    Thanks.
    Regards,
    Pamela

  • Error while deriving the currency from table

    i am getting the below error while simulating the payroll for india.
    Error while deriving the currency from table T001P & Error during Initialization of payroll.
    i am SAP HCM Trainee.. practicing at home.

    Pls check the currency in table T500C.
    You can use TCode OE00 for table maintenance T500C.
    Also check whether currency is there in table V_CURC and T510.
    Hope this will help.
    Regards
    Ghouse

  • Error while deriving the currency from table T001P.

    Hi Friends,
    I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
    I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
    Could you please help me as to where this error can be corrected.
    Thanks,
    Manj

    About the incidence, the problem might be related to the links between
    personnel area, company code and currency set up (table T001P, T500P and
    T001).
    Please check the following points:
    1- Have you assigned the Personnel area to the Company code under SPRO -
    IMG -> Enterprise Structure -> Assignment -> Human Resource Management
    -> Assignment of Personnel Area to Company Code.
    2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
    Determine Currencies (Public Sector Currency Need to be maintained along
    with the other node).
    3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
    Basic Pay -> Define Hourly Rates for several decimal places. (Please
    maintain all the nodes).
    4- Maintaining the table t500c through transaction code OE00.
    Regards
    Ramana

  • Change the currency of Operating Concern COPA

    Hi,
    In my SAP environment there are 4 controlling areas. Only one of them is assigned to Operating concern. The remaining 3 have COPA inactive.
    I would like to extend the existing operating concern to remaining 3 controlling areas, but before I do that I need to change the Operating concern currency as the one currently set is only relevant for only one controlling area and company code which is GBP. I need to change it to group currency - USD.
    When I use F1 help on currency field in Operating Concern settings in configuration, I get information that 'once data has been posted, however, a change in the operating concern currency would cause the existing data to be interpreted as if it were posted in the new currency (for example: USD 1000.00 in old currency -> DEM 1000.00 in new currency).'
    Even though we have transactional data posted in that operating concern , it is not being used by any department and we are quite happy to have existing data interpreted in USD instead of GBP. No reports are being generated in COPA currently so it will not be an issue for us. We want new data to be proper and constistent.
    When I try to change the currency in operating concern config, the field is greyed out. I believe there is  more complex workaround for that, but the only note I found on this is  651142 which says that SAP provides different tools to reorganize operating concern. But no further details are included.
    If anybody managed to change operating concern currency, please help me with that.
    Regards,
    Karol

    Hi Karol
    I read the note given by you.. It asks you to contact the SAP for SLO Service (System Landscape Optimization )
    This is a chargeable service by SAP... In case you decide to go ahead with this, do share your experience with us
    Create an OSS msg and give ref of this note... I would suggest to go with SAP service and not with any one else's experiences... The tools that SAP is talking about are available only with SAP..
    You may try to archive the existing data from COPA tables and then see if the currency field opens up for editing.. Am not sure about it..
    Regards
    Ajay M

  • Currency Conversion Error

    In one of my report for Foreign Currency Conversion I am using the FM 'CONVERT_TO_LOCAL_CURRENCY'
    The foreign Currency value is 19,120 but in debugging it is shown as 191.20 but finally displaying in the output as 19,120.
    After converting, Local currency calculated is shown as 47397 in debugging whereas it should be 473.97 and is displayed in the output as 474.
    Please suggest any possible solution to avoid the rounding of the last digits.

    Hi marina,
    in this FM 'CONVERT_TO_LOCAL_CURRENCY'  is correct  . in your case you have  :
    CLIENT
    DATE
    FOREIGN_AMOUNT
    FOREIGN_CURRENCY
    LOCAL_CURRENCY
    RATE
    TYPE_OF_RATE
    READ_TCURR
    as import parmaters.
    Type of rate    M=Average rate G=Bank buying rate B=bank selling rate rate.
    check the long text inside the function module -> import parameters.. then set the value accoriding to that.
    regards,
    safel
    In one of my report for Foreign Currency Conversion I am using the FM 'CONVERT_TO_LOCAL_CURRENCY'
    The foreign Currency value is 19,120 but in debugging it is shown as 191.20 but finally displaying in the output as 19,120.
    After converting, Local currency calculated is shown as 47397 in debugging whereas it should be 473.97 and is displayed in the output as 474.
    Please suggest any possible solution to avoid the rounding of the last digits.

  • Can we change the Currency in the PO after GR and  invoice posting

    Hi
    Can we change the currency in the PO , Once after posting of the GR and Invoice.
    If posssible please suggest me the steps.
    Best Regards,
    Sairam

    Hi  Sai,
                   I suggest  not  to change the PO Currency once the GR and Invoice  is Posted , As the  Reports which fetch the PO value will go wrong if we do that.
    PS.  In ME22n System disables  the Currency feild once GR and Invoice Is posted.
    Thanks
    Sudhakar

  • How to change the currency in Billing plan in SO line item

    Hi Experts
    Pls help in following scenario.
    Company Code Currency: HKD
    Sales Document Currency: INR(Indian Rupees)
    Item Pricing Condition Currency(PR00): 100 USD
    Item Netvalue: 4800INR(System caluculated as per exchange rate type M)
    Document Netvalue: INR 4800
    The sales document item is linked to a billing plan.
    I wanted to maintain 100USD in the billing plan.
    When i goto Sales->item-->Billing Plan, The currency in billing plan screen is document currency and is greyed out.
    How to change the Currency in Billing plan (to Item Condition currency) and maintain the Billing value in USD?
    Pls help.
    Regds
    Hari

    Currency change we wanted to do is not during Invoicing.
    In billing plan itself we want to change the currency setup the billing value in item condition currency.
    Any one, pls help.

  • How to change the currency in Adobe X Reader

    Hello,
    New here and looking for some help in changing the currency from the £ sign to a $ sign.
    I am not very program savy so any help anyone could provide would be great!
    Thank you in advance.

    Is this a form you created in Acrobat or is it a form that you're using with Reader? If the latter, there's nothing you can do if the field has been set up to format the field with a £ for the currency symbol.

  • How change the currency in trnasaction CON2?

    Hi,
    I have problem with transaction CON2.
    CO Area currency type is  20 -EUR but currency of company code is RON. In FI there is parallel currency 40 hard currency EUR.
    This configuration in FI means that depreciation is separate calculate in RON and in EUR. To calculate depreciation in EUR system take acquisition value in RON and transfer it into EUR using the currency rate from the date when fix asset was opended in the system (for example it was 2008 - so  the currency rate was completely different then now), and from that calculated acquisition value in EUR system calculate depreciation.
    Into CO system take value in RON and EUR, but remember that depreciation in EUR is calculated using historical currency rate so the value of depreciation in EUR is not correct if we compeare it with value in RON (the currency rate is from 2008).
    To calculate actual fixed rate (transaction KSII) I use settings "interate amounts independently " so the rate is calculated independently in RON from value in RON and in EUR form value in EUR, in this way I have correct rate in RON, but rate in EUR is not correct because the value of depreciation in EUR is not correct because  of historical currency rate.
    And till now is ok, I have correct total and fixed and variable part of rate in RON in transaction KSBT.
    But when I use transaction CON2 system take correctly in RON total rate in RON, and in EUR the total rate in EUR as well as the fixed and variable part of rate in EUR.
    But the fixed and variable part in RON is not correct because system calculate the percentage of fixed part  in EUR in total rate in EUR and using this percentage calculate fixed part  in RON (using this percentage to multiple total rate in RON). IN this way in CON2 I have correct total rate in RON but wrong fixed and variable part of rate in RON.
    Why? system calculate one more fixed and variable part of rate in RON form the rate in EUR and use it in transaction CON2 but not use the correct fixed and variable  part of rate in RON  which are in report KSBT? What can I do?
    thanks in advance.
    Iza

    Currency change we wanted to do is not during Invoicing.
    In billing plan itself we want to change the currency setup the billing value in item condition currency.
    Any one, pls help.

Maybe you are looking for