Currency Conversion Error from KRW to EUR in for March 2011

Hi,
We are facing problem in Currency conversion from KRW to EUR in BW Production.
The report shows proper value for JAN, FEB 2011, but when we execute the report for March2011 it shows wrong value.
Month               |   BW Production Value    |           BW TEST Value     
Jan2011 u2013        |   102,459                         |              102,459                                          
Feb2011 u2013        |   120,008                         |              120,008                                      
March2011 u2013    |   12,056,385                    |              120,564
As we can see the value for BW Production for the month of March is 2 decimals higher than the value in BW test.
Regards,
Nix
Edited by: nix_mania on Apr 18, 2011 4:20 PM

Hi,
My problem here is that the values for JAN and FEB are correct with their decimal values but only for March it is 2 decimals higher.
Hence the TCURX table wonu2019t come into picture, since if TCURX entry was incorrect then it should show wrong values for JAN and FEB also.
When I checked the data in cubes for BW Test and Production the values for March are same still in the report I am getting the difference.
Report Output:-
March2011:-
BW Test                    12,056,385
BW Production          120,564
Feb 2011:-
BW Test                    120,008
BW Production          120,008
Jan2011:-
BW Test                    102,459
BW Production          102,459
Regards,
Nix

Similar Messages

  • Currency conversion Error in 0sd_c15

    Hello Experts,
       I am having a problem in the ETl of the cube 0SD_C15 .Its showing Currency conversion error
    0MEANTODAY while loading data.Please help me in this regard
    Prasad

    Hi
    You will find the transfer global settings for the source system where you are extracting the data.
    Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
    Then Reload the data into the cube,
    After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
    I think, this will work....
    Regards
    Sudheer

  • Unable to create shopping cart due to currency conversion error.

    Hi,
    We are currently working in a extended classic scenario. We have about 8 users connected under a common entity ( dept). Out of which for one user (user1) we are able to create the shopping cart and able to run the entire procurement cycle the entire cycle.
    When we are trying to create a SHC with any other user ( user2 to 8)  its giving the errors like
    1) Currency Conversion Error ( to GBP). Please inform help desk.
    2) Error in account assignment for item 0.
    Attributes for all the users ( user1 to user8) are same and we are not getting any error in the attribute check as well.
    Please suggest.

    Look up note 419423 + related notes to repair incorrect SRM users. What you report sounds a bit strange. A debugging session might be helpful too. Especially the 2nd error looks like something 'home-made'...

  • Fetch dollar to euro currency conversion rate from the interwebs ...

    Hey guys,
    this might sound like a dumb question to you, but is there a way
    to fetch the dollar to euro currency conversion rate from let's say
    yahoo finance into a single cell inside numbers 09?
    Basically what want is, just a plain output in a number like:
    0,7421 so that I can use it to convert various values.
    I'm just sick of going to the website every day and copy paste the
    value into my numbers file.
    I'd really really appreciate it, if someone could help me.
    I don't know anything about apple scripting, but I think this might
    be the way to go?
    Best, JK

    Go to my idisk :
    <http://public.me.com/koenigyvan>
    download :
    For_iWork:iWork '09:forNumbers09:insertquotes.zip
    You will get several scripts more or less complex.
    Yvan KOENIG (VALLAURIS, France) lundi 14 février 2011 21:48:54

  • Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

    Hi,
    I have a file where fields are wrapped with ".
    =========== file sample
    "asdsa","asdsadasdas","1123"
    "asdsa","asdsadasdas","1123"
    "asdsa","asdsadasdas","1123"
    "asdsa","asdsadasdas","1123"
    ==========
    I am having a .net method to remove the wrap characters and write out a file without wrap characters.
    ======================
    asdsa,asdsadasdas,1123
    asdsa,asdsadasdas,1123
    asdsa,asdsadasdas,1123
    asdsa,asdsadasdas,1123
    ======================
    the .net code is here.
    ========================================
    public static string RemoveCharacter(string sFileName, char cRemoveChar)
                object objLock = new object();
                //VirtualStream objInputStream = null;
                //VirtualStream objOutStream = null;
                FileStream objInputFile = null, objOutFile = null;
                lock(objLock)
                    try
                        objInputFile = new FileStream(sFileName, FileMode.Open);
                        //objInputStream = new VirtualStream(objInputFile);
                        objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
                        //objOutStream = new VirtualStream(objOutFile);
                        int nByteRead;
                        while ((nByteRead = objInputFile.ReadByte()) != -1)
                            if (nByteRead != (int)cRemoveChar)
                                objOutFile.WriteByte((byte)nByteRead);
                    finally
                        objInputFile.Close();
                        objOutFile.Close();
                    return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
    ==================================
    however when I run the bulk load utility I get the error 
    =======================================
    Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
    ==========================================
    the bulk insert statement is as follows
    =========================================
     BULK INSERT Temp  
     FROM '<file name>' WITH  
      FIELDTERMINATOR = ','  
      , KEEPNULLS  
    ==========================================
    Does anybody know what is happening and what needs to be done ?
    PLEASE HELP
    Thanks in advance 
    Vikram

    To load that file with BULK INSERT, use this format file:
    9.0
    4
    1 SQLCHAR 0 0 "\""      0 ""    ""
    2 SQLCHAR 0 0 "\",\""   1 col1  Latin1_General_CI_AS
    3 SQLCHAR 0 0 "\",\""   2 col2  Latin1_General_CI_AS
    4 SQLCHAR 0 0 "\"\r\n"  3 col3  Latin1_General_CI_AS
    Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
    Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
    http://www.sommarskog.se/arrays-in-sql-2008.html
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Convert mails from apple mail to outlook for mac 2011

    Hello, 
    need to convert mails from apple mail to outlook for mac 2011. have gone through Imap procedure and am tired of transferring mails manually coz there are thousands of'em. can anyone suggest any simple solution to this problem?
    thanks.

    Create a IMAP account (GMAIL icloud etc.)
    add account to Apple mail and Outlook 2011
    Drag emails into a folder on the imap server and then go back to Outlook 2011 and drag the emails from the imap into your email. and your done all your emails
    are there.
    There are third party tools available now-a-days for this kind of problems and they are pretty useful. You have just to select the files from the apple mail
    that you want to convert and your mails are transferred within no time.
    Convert Apple Mail to Outlook for Mac 2011

  • Currency COnversion Error: RUN_LOGIC:Member LC not exist.......Please help

    Hi All,
    I am trying to run currency conversion and following is my script logic.
    *RUN_PROGRAM CURR_CONVERSION
          CATEGORY  = %CATEGORY_SET% 
          TID_RA = %TIME_SET%
          RATEENTITY = GLOBAL
          CURRENCY = %RPTCURRENCY_SET%
          OTHER = [ENTITY=%P_CC_SET%]
    *ENDRUN_PROGRAM
    I have also tried the following reading from other post
    *RUN_PROGRAM CURR_CONVERSION
          SELECT(%RptCurrency_SET%,"[ID]",RptCurrency,"[CURRENCY_TYPE]='R'")
          CATEGORY  = %CATEGORY_SET% 
          TID_RA = %TIME_SET%
          RATEENTITY = GLOBAL
          CURRENCY = %RptCurrency_SET% 
          OTHER = [ENTITY=%P_CC_SET%]
    *ENDRUN_PROGRAM
    My RPTCURRENCY dimension had following entries
    ID REPORTING CURRENCY_TYPE
    USD Y R
    EUR Y R
    LC       L
    Also my Currency Conversion data package selection is as follows:
    P_CC: ALL
    CATEGORY: ACTUAL
    RPTCURRENCY: ALL
    TIME: 2008.JAN
    Following is the error
    RUN_LOGIC:Member "LC" not exist
    Failed
    Application: PLANNING Package status: ERROR
    Please help.
    Thanks,
    Diksha.

    Hi All,
    My LGX files is as follow
    *RUN_PROGRAM CURR_CONVERSION
    SELECT(,[ID],RptCurrency,[CURRENCY_TYPE]='R' )
    CATEGORY =
    TID_RA =
    RATEENTITY = GLOBAL
    CURRENCY =
    OTHER = [ENTITY=]
    *ENDRUN_PROGRAM
    If I am not wrong it should have substituted vales for variable %RptCurrency_SET% to USD and EUR.
    Please let me know.
    Diksha.
    Edited by: Diksha Chopra on Dec 22, 2010 5:27 AM

  • Currency conversion error in SAP HANA

    Hi,
    I am new to SAP HANA and learning to create information views in HANA studio (SAP HANA SP6 on Cloudshare, HANA studio 1.0.68). I am trying to create a simple analytic view (on purchaseOrderItem table in SAP_HANA_EPM_DEMO sample database) to have GrossAmount converted to EUR.
    I added a calculated column as follows:
    When i click on "OK", i get error -
    The check box “Calculate before aggregation” has been unchecked, because the definition of the calculated column contains measures with currency conversion, restricted measures or operands with input parameters. For such a calculated column the calculation is always done after the aggregation."
    and checkbox "calculate before aggregation" get unchecked. See screenshot below:
    Please suggest what could be reason? Thanks in advance.
    Regards,
    Amit

    Hi Amit,
    If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
    By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
    Regards,
    Ravi

  • Currency conversion error in SRM

    Hi,
    When we are trying post the confirmation in SRM it is giving the error message that "Error in currency conversion between EUR and USD".
    We have checked the exchange rate settings in SRM and Backend (R/3) there is no issue at all. Everything is maintained properly but still the sytem is giving error.
    PO currency and vendor currency is USD and company code currency is EUR.
    Is there any other settings missing which is causing the error.
    Thanks in Advance
    S.Parvahi

    hELLO Parvahi,
    Did you check OB08 in backend if maintained properly? also check validity...
    also on the SRM side is below report run using SA38?
    Update exchange rate tables in component system :BBP_GET_EXRATE       
    Hope that helps                    
    Arshad
    Edited by: arshad ahmed on Feb 9, 2010 12:06 PM

  • CONVERT_TO_LOCAL_CURRENCY currency conversion errors in Delta mode

    Hello,
    I have been working with SAP via customer messages for a month now with no resolution.  As many of you have experienced, the SAP Level 1 support is pretty useless so I would like to check here to see if I can get some help.
    I found a thread where another user has had the exact same problem as I have. 
    Problem: Exchange rate in Update rules with DELTA mode
    However, there was no answer given to him.  So, if anyone can help, I appreciate it.  Here's the problem:
    When a record comes through 2LIS_13_VDITM (for example), it had a document currency of EUR, a local currency of PLN and a statistical currency of USD.  The first time the record comes through, it comes through just fine.  The exchange rate from EUR to PLN is 3.533.  The statistical currency value is calculated by taking the document currency value and multiplying it by the exchange rate from EUR to PLN to get the local currency.  Then, this local currency is converted to USD by multiplying itself by the PLN to USD exchange rate of 1.519.
    These are the exchange rates that are coming through as key figures on the transaction data.  The problem is when a delta occurs.  The data goes into the ODS and then once the update rules to the cube get it, the signs are backwards on the exchange rates.  This makes sense so that the exchange rate key figures will cancel themselves out, but the SAP code says to calculate the local currency, it must first take the document currency and divide by the exchange rate.  It should still be multiplying because the exchange rate from EUR to PLN is still 3.533.  The negative on the key figure that is being zeroed out tells the code to divide though.
    You cannot simply set the reversal indicator because the values that do come through ok would then be erraneous as the previous poster who had the same issue encountered.  This is really causing some bad data for us.  This is SAP delivered code.  Any help would be appreciated.
    Thanks,
    Brent

    hi,
    chk out various application currency conversion  links
    Need Urgent Help on Currency Conversion Routine
    Currency conversion using transformation rule
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/058f4073b2f30ee10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/16/088f4073b2f30ee10000000a155106/frameset.htm
    Ramesh

  • HTTP-Receiver: Code page conversion error from UTF-8 to ISO-8859-1

    Hello experts,
    In one of our interfaces we are using the payload manipulation of the HTTP receiver channel to change the payload code page from UTF-8 to ISO-8859-1. And from time to time we are facing the following error:
    u201CCode page conversion error UTF-8 from system code page to code page ISO-8859-1u201D
    Iu2019m quite sure that this error occurs because of non-ISO-8859-1 characters in the processed message. And here comes my question:
    Is it possible to change the error behaviour of the code page converter, so that the error will be ignored?
    Perhaps the converter could replace the disruptive character with e.g. u201C#u201D?
    Thank you in advance.
    Best regards,
    Thomas

    Hello.
    I'm not 100% sure if this will help, but it's a good Reading material on the subject (:
    [How to Work with Character Encodings in Process Integration (NW7.0)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42]
    The part of the XSLT / Java mapping might come in handy in your situation.
    you can check for problematic chars in the code.
    Good luck,
    Imanuel Rahamim.

  • Bex to Business Objects - Currency Conversion error in Webi

    Hello,
    I am attempting to transfer a Bex 7 key figure currency conversion to a Business Objects filter in a Universe for display in a Webi report.  The version of Business Objects XI 3.1 SP2.  The Bex Conversion Type is based off Calendar Month, and the Target Currency variable is a selection prompt. The filter is passed to the universe and prompts when the report is ran in Webi, but an error occurs if the currency is populated.  For instance, if I populate the filter in Webi with 'USD', the following error occurs:  The MDS query SELECT "....." failed to execute with the error Value 'USD' FOR variable "Currency" is invalid (WIS 10901).
    I'm not sure if the currency conversion information is being properly transferred and translated to Business Objects.  Does anyone have any insight on this issue?
    Thank you,
    Brock

    I was able to modify the dimension for the filter to retrieve the correct object (Ex. USD), but there are multiple incorrect selections for USD and other currency types.  For instance, when I type in USD i get 5 different options, and the one with the description 'American Dollar' is the correct one.  Why is Webi displaying all these different options?  When I display the options for currency in Bex only one 'USD' is shown in the list.   Here is my filter condition for currency type in the Universe:
    <OPTIONAL><FILTER KEY="[SELCUR]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Select Currency','A','Organization\Cur Key',mono,primary_key)"/></CONDITION></FILTER></OPTIONAL>
    Cur Key is my customized hidden dimension
    Thank you

  • Currency conversion error by changing the currency

    Hi all,
    i am facing a problem by refreshing the query with  another currency. f.e. i am calling the report in Euro and then i say refresh variables and change the currency in USD. So i get the same values and the currency conversion dont work.
    I get the following alert message after i change the currency and run the report.
    Diagnosis
    You attempted to convert a currency. The system cannot find a valid currency into which to convert the value.
    System Response
    The OLAP processor cannot convert the currency. The drilldown is not changed.
    Procedure
    Specify a valid target currency.
    Procedure for System Administration
    This message can only appear for Web templates in which currency conversion is set manually (using the SAP BW URL). If this message appears following a currency conversion dialog box, an SAP error has occurred; report this error using OSS.
    Can someone help me before i open a OSS error. Thanks.

    Hi,
    did you check the setting  in BI for source system ?
    Else just try it
    RSA1 - goto source system
    Expand SAP
    Context Menu of Source System
    There are
    Global Settings
    Transfer Exchange Rate
    Hope it will help you ...
    BVR

  • Conversion error, from character set 4102 to character set 4103

    Hi,
    We've developed a JCO server(in Java) with an ABAP report the function provided by the JCO server.
    MetaData:
         static {
              repository = new Repository("SMSRepository");
              fmeta = new JCO.MetaData("ZSMSSEND");
              fmeta.addInfo("TO", JCO.TYPE_CHAR, 255,   0,  0, JCO.IMPORT_PARAMETER, null);
              fmeta.addInfo("CONTENT", JCO.TYPE_CHAR, 255,   0,  0, JCO.IMPORT_PARAMETER, null);
              fmeta.addInfo("RETN", JCO.TYPE_CHAR, 255,   0,  0, JCO.EXPORT_PARAMETER, null);
              repository.addFunctionInterfaceToCache(fmeta);     
    Server parameters:
           Properties prop = new Properties();
           prop.put("jco.server.gwhost","shaw2k07");
           prop.put("jco.server.gwserv","sapgw01");
           prop.put("jco.server.progid","JCOSERVER01");
           prop.put("jco.server.unicode","1");
           srv = new SMSServer(prop,repository);
    If we run JCO server in both my client machine(from developer studio) and in the WAS machine(stand alone Java program), everything is ok. In the Abap side, the SM59 unicode test return the destination is an unicode system, and the ABAP report call the function can run smoothly.
    But we package this JCO server to a web application and deploy to WAS, problem occured. The SM59 unicode test still say the destination is an unicode system. But the ABAP report runs with an ABAP DUMP:
    Conversion error between two character set
    RFC_CONVERSION_FIELD
    Conversion error "RETN" from character set 4102 to character set 4103
    A conversion error occurred during the execution of a Remote Function
    Call. This happened either when the data was received or when it was
    sent. The latter case can only occur if the data is sent from a Unicode
    system to a non-Unicode system.
    I read the jrfc.trc log, it shows it receives data in unicode 4103(that's ok), but send data in unicode 4102(that's the problem).4102 is UTF-16 Big Endian and 4103  UTF-16 Little Endian. Our system is windows on intel 32 aritechture, so based on Note 552464, it should be 4103.
    Why it sends data (Java JCO server send output parameter to ABAP) in 4102?????
    What's the problem??? Thank you very much!!
    Best Regards,
    Xiaoming Yang
    Message was edited by:
            Xiaoming Yang

    Hello Experts,
    Any replies on this?
    I am also getting a similar kind of error.
    Do you have any idea on this?
    Thanks and Best Regards,
    Suresh

  • Currency Conversion Error

    In one of my report for Foreign Currency Conversion I am using the FM 'CONVERT_TO_LOCAL_CURRENCY'
    The foreign Currency value is 19,120 but in debugging it is shown as 191.20 but finally displaying in the output as 19,120.
    After converting, Local currency calculated is shown as 47397 in debugging whereas it should be 473.97 and is displayed in the output as 474.
    Please suggest any possible solution to avoid the rounding of the last digits.

    Hi marina,
    in this FM 'CONVERT_TO_LOCAL_CURRENCY'  is correct  . in your case you have  :
    CLIENT
    DATE
    FOREIGN_AMOUNT
    FOREIGN_CURRENCY
    LOCAL_CURRENCY
    RATE
    TYPE_OF_RATE
    READ_TCURR
    as import parmaters.
    Type of rate    M=Average rate G=Bank buying rate B=bank selling rate rate.
    check the long text inside the function module -> import parameters.. then set the value accoriding to that.
    regards,
    safel
    In one of my report for Foreign Currency Conversion I am using the FM 'CONVERT_TO_LOCAL_CURRENCY'
    The foreign Currency value is 19,120 but in debugging it is shown as 191.20 but finally displaying in the output as 19,120.
    After converting, Local currency calculated is shown as 47397 in debugging whereas it should be 473.97 and is displayed in the output as 474.
    Please suggest any possible solution to avoid the rounding of the last digits.

Maybe you are looking for

  • How to view my pics on my ATV3

    I just need a simple walkthrough. I just upgraded my iPhone 4 from 6 to 7 (in spite of caveats) and would like to know exactly how to stream my Photo Stream Pics to my ATV3. Thanks.

  • Pages on my Mac will not open...

    when opening the open file comes up but a small window with a blue scrolling bar comes up and I cannot open, close, or do anything at all.  A force quit and reboot, or cutting the net hasn't helped either.

  • Download only selected record from ALV

    Hi   I want to download only selected records from ALV output with button. i hav to fix the button on ALV screen using &ZDL whenever user presses the button record should be downloaded. Pl with coding its very very urgent.

  • Word 2010 Mail Merge Missing Data

    I have a large Excel data file: 1725 records, 31 columns, 1.74MB total size. Other data: Windows 7 (64 bit) Word/Excel 2010 Version: 14.0.7116.5000 (32-bit) I am running a standard mail merge on a filtered subset of the data (112 records). At least o

  • "Only sync checked items" grayed out

    I've updated iTunes to the newest version and my 5th gen. iPod to v1.2. I'm trying to get the box on the iPod summary page to become "checkable"... it's the "only sync checked items" box, and it's grayed out... without it, the way I manage my podcast