Currency fields on Adobe Interactive Form
Hello,
I have placed a currency field on the Adobe Interactive Form.
Local has been set to 'Viewer's System Locale'.
But if I try to put any amount in this field, the following error message is displayed:
"Distance Between Separators for Thousands Must Be 3."
I tried with following amounts:
10000
10000.54
10
1
Note that my default decimal point is '.'.
Regards
Sagar
Sagar,
Goto Object Palette --> Value Tab --> Check if you set any Validation Pattern for the currency field.
If you don't want, remove the validation.
Chintan
Similar Messages
-
Process data of none bound fields in Adobe Interactive Form (stack 13)
I use a Adobe interactive form (made in Designer 7.0)which is a combination of fields bound to Web Dynpro Context fields and fields which has no binding at all (in Designer: Default binding = Normal). The Adobe Document Services on the J2ee server is of stack 13.
When I save the Adobe Form (off-line scenario)from the Web Dynpro Application, only fields bounded to the Web Dynpro Context are saved in the Form on my local file system(no warning that data isn't saved).
When I open the Form for off-line editing, I can change bounded fields and none bounded fields. But when I save and re-open the form, the data in the none bounded fields is lost.
I used the same scenario in a stack 11 j2ee/portal system, but then all data (bounded or not) in the form was saved!
Could anyone explain the difference, but better tell me how to save both kind of fields in the off-line form (and bounding all fields is <u>not</u> a solution).
Thanks in advance,
RichardHi,
Check your ADS settings, I feel it's due to lack of some config in ADS only.
Regards
<i><b>Raja Sekhar</b></i> -
Need help with calculated fields in Adobe Interactive Forms
Hi Gurus,
I have an Adobe Interactive form in which i have radio buttons. Upon selecting any of the radio buttons, value in text box should be changed( Calculqated filedS). How i can achieve this?
Regards,
Srini
Moderator message: wrong forum, please post again in Adobe Interactive Forms, but always try yourself before asking.
Edited by: Thomas Zloch on Jul 13, 2010 11:58 AMHi Tapan
No, it's working ,with one remark.
I've done a mistake, in the final formula. The logic remain the same! ;)
The calculation values for second column ( COL2 ) are 1,2,3 and not 0,1,2 as I wrote before and as for COL1 are so the formula is
=3*if(COL1="ABC",0,IF(COL1="DEF",1,2)+if(COL2="RST",1,IF(COL2="YYZ",2,3)
and not
=3*if(COL1="ABC",0,IF(COL1="DEF",1,2)+if(COL2="RST",0,IF(COL2="YYZ",1,2)
I created also a real example for you, with 2 dif calculation ways . First I created 2 calc_columns for COL1 and COL2 ( CALC_COL1+CALC_COL and after I added both these 2 column , and second way is to calculate directly) .
Check this image
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you. -
Hiding a field in adobe interactive form
Hi All!
I am working with Adobe Interactive form. I want to make a <i><b>subform</b></i> invisible based on the selection of one of the options in the <i><b>dropdown list</b></i>. I tried the following javascript in the change event of the <i><b>dropdown list</b></i>:
<i><b>xfa.resolveNodes("subformName").presence = "invisible";</b></i>
but nothing happens when i change the value of the <i><b>dropdown list</b></i>.
Please suggest some solution for this.
Thanks!Hi Temp,
We can use a data driven approach for setting the presence. The Minimum Occurrence property has to be set as 0. In this approach if data does not exists at runtime for that particular node, the complete subform will be invisible without any reserved space. (In this approach also layout has to be set as Flow Layout only).
regards
Sumit -
Changing the background of a text field in adobe interactive forms
Hello All,
Is there any way to change the background colour of text field in interactive form dynamically.??
Thanks,Naresh,
Change the language to JavaScipt in Script Editor of LiveCycle Designer and use the following code to highlight the area of TextField where R,G,B means that you have to give the RGB values of the color you want.
<YourTextFieldName>.border.edge.color.value = "R,G,B";
For eg:- If you have a textfield with name TextField1 then this will highlight the TextField1 area in red color.
if ((TextField1.rawValue==null) || (TextField1.rawValue==""))
TextField1.border.edge.color.value = "255,0,0";
You can use this on exit event of Textfield1 or at the submit button where you check the form data.
Chintan -
Decimal field in Adobe interactive form
I am making one report in which i am displaying decimal field , if that variable contains value then there is no problem but when the value is null then it is showing 0.00 so please suggest me any method by which i can remove these 0.00 and the space left blank.
Thanks. AnkeshDo one thing...
write the following code on "intialize" event of LSF field:
xfa.host.messageBox( $.rawValue );
if ( $.rawValue == 0.0 ) {
$.rawValue = "";
What is the message coming in messageBox in case of value is 0, write that value in if condition.
Edited by: Amit on Jun 6, 2008 7:07 AM -
Use Of Dictionary Based search help in adobe interactive form
Hi friends,
I wanted to export the search help value into corresponding field of Adobe interactive form.
I am using dictionary type search help in WD context attribute property. I am able to get the search help popup with right data on form. But if select some value it is not exporting data into the field and getting "entry too longer" error.
Can any one help out for this issue.
Note : Wanted to use only dictionary based search help.
Thanks in advance
Naganath Mudalethanks
-
Hi Experts,
I'm working on Adobe Interactive form developed in WDP ABAP.( I have successfully config the ADS in my server.)
Action:
1. Create two view -
first_view and second_view in the WDP ABAP..
2. In the first_view, there are a input field( named "elements_number") and a button(named "create_button") .
3. In the second_view, there is Adobe Interactive form ( named "adobe_form" ).
4. Run the WDP ABAP: first_view is opened. Type a number ex."3" in the "elements_number", click the "create_button".
5. The second_view is opened.
6. The "adobe_form" is occured.
7. There are 3 text_fields in the "adobe_form".
Steps (1) ~ (6), I have completed, but I don't know how to implement the step (7).
Please give me some hint on this. I try to use the CL_WD_ADOBE_SERVICE, but I didn't found any examples. Do you give me some ways to implement the function? Thanks a lot.
Thank you very much.
Thanks,
TaoHi Philippe,
Thank you very much in advance.
Do you tell me how to hide elements in the "adobe_form" in the WDP ABAP? How can I get the elements attributes in the "adobe_form" from the method WDDOMODIFY of the second_view in the WDP ABAP.
Please give me some hints on this. Do you give me some ways to implement functions( hide elements and get elements's attributes)? Thanks a lot.
Thank you very much.
Thanks,
Tao -
Making field for output in adobe Interactive Form
Hi Gurus,
Actually we have an requirement to input date from user, But user always select the wrong format for date.
Hence it is required to select the date from F4 only.
Let us the optimal solution for this.
Thanks,
Shiva
Moderator message: please have a look in the dedicated forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on Feb 10, 2011 10:25 AMDo one thing...
write the following code on "intialize" event of LSF field:
xfa.host.messageBox( $.rawValue );
if ( $.rawValue == 0.0 ) {
$.rawValue = "";
What is the message coming in messageBox in case of value is 0, write that value in if condition.
Edited by: Amit on Jun 6, 2008 7:07 AM -
Adobe Interactive Forms - F4 help for fields
Hi,
I'm new to Adobe Interactive Forms.
I'm building a interactive form and there in it I've a field named as CARRID which is bound to webdynrpo context.
Is there any way through which we can enable F4 help for a DataField( CARRID in my case ) in both Online and Offline Forms.
Any pointers will be appreciated..
Regards
Manas DuaHi,
In the library Webdynpro Native there is a UI for value help drag the UI in ur lay out and bind the value of the field in click event.
var fieldName = "CARRID"; // CARRID is the field name
Kind Regards
Mukesh -
Web Service is not triggering using Adobe Interactive Form
Hello Experts,
I know this is a common topic now , but the problem I am facing, no thread help me to solve that.
Problem:--
My requirement is to create an adobe form , in which
-> an input field is needed,and some description is needed.
I used button to trigger my webservice.
Here , I want to clear that , I have made a proper WEB SERVICE using Remote Enabled FM.
My web service is working fine as I have tested from WS NAVIGATOR(Note: http://<source>:<port>/wsnavigator).
In Adobe Form (SFP), I have made a new Data connection using WebService WSDL.
All Request and Response parameters are availabe in Data View palletes of Form.
Button that is available from data connection is used.
I have used Button as an Execute button , under execute tab in connection , I had given DATA CONNECTION name .
But above things not worked so ,
I also tried with Regular Button , and under click written Javascript/FormCalc which is:--
var cURL = 'http://x.y.com:8012/sap/bc/srt/rfc/sap/ZMATERIAL_DESCRIPTION?sap-client=800&wsdl=1.1';
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection2.execute(0);
But this also not worked .
So, I think there can be a little issue may be , I am forgetting to click some special atrributes in form .
Please help me and let me know what can be probable reasons that webservice is not triggering
Thanks a lot ,
JeetSolved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.
-
Error message while clicking PDF Preview of a ADOBE interactive form
Hi -
I am creating an ADOBE interactive form having Tables, few text fields and E-mail submit button. The scripting language used is FormCalc.
Whenever I am clicking on PDF Preview to see the form layout and to check other functionality, I am getting an error message:
Error message -
Error: syntax error near token '|' on line 1, column 14.
Script failed (language is formcalc; context is xfa[0].form[0].data[0].Mainpage[0].Subform3[0].Table2[0].Row1[0].RATING[0])
script=this.isnull || (this.rawvalue >= -32768 && this.rawvalue <= 32767
I checked my scripts and there is no syntax error in that. My form is also working absolutely fine except getting this error message pop up whenever I try previewing my form.
Can you please tell me, what can be the possible reason.I tried everything, but couldn't figure out the reason for error. I wrote the script again, but the error is still coming.
Here is a part of my script. I have written this script on Email submit button in preSubmit event, to check if the RATING field value is less than or equal to 3. depending upon this condition, I am making the COMMENT field as mandatory. The same script is repeated for all the RATING & COMMENT fields.
if (data.GyanMainBodyPage.Subform2.Table1.Row1.RATING1 <= 3)
then
data.GyanMainBodyPage.Subform2.Table1.Row1.COMMENT1.mandatory = "error"
data.GyanMainBodyPage.Subform2.Table1.Row1.COMMENT1.mandatoryMessage = "Please fill corresponding comment"
else
data.GyanMainBodyPage.Subform2.Table1.Row1.COMMENT1.mandatory = "disabled"
endif -
Adobe Interactive Form in Web Dynpro ABAP
Hi all.
I want to create an web dynpro application in ABAP using an Adobe Interactive Form. Can anybody share the document regarding this or any articles.
Thanks & Regards
Sagar IngalwarHi,
it is so simple..
1) Create AdobeInteractiveForm UI element in your screen.
2) Create pdf_source for pdf source attribute to bind it should be byte data.
3) Create node for data Source. (The data which you want to place on the pdf form)
4) right click on interactive form UI element & edit
5) PDF editor will be open.
6) drag the required data fields from data source to the form.
7) place submit button on the form.
Finally there are two kinds of interactive modes
1) native mode (it runs on firefox browser)
2) active X mode (it runs on Internet Explorer 6)
Please use appropriate submit button on the form (i.e. native/ActiveX submit button)
Best Regards
Ravi -
ADOBE Interactive Form in webdynpro not allowing to enter value
Hi,
I have developed a Adobe interactive form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
regards,
RoopsHi friends,
The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
1.) any notes or patches ???
2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
Regards,
Roops. -
Adobe Interactive Form is displayed in Read Only mode
Hi All,
I created Adobe Interactive Form in SFP.
The following properties are set to the form.
Layout Type -ZCI Layout
Preview Type - Interactive Form
XDP Preview Format - Acrobat 7.0.5 Dynamic PDF
In PDF preview tab, I can enter data into the Text Fields.
I added this form in a web dynpro ABAP application using Interactive Form UI element.
The following properties are set to the UI element.
DataSource - bound to the context
displayType - native
enabled - checked
templateSource - Formname
readonly - unchecked.
When I run this application, the form is displayed in readonly mode.
I can't enter any data into the text field.
Any of you guys know that how to resolve this?
Thanks
ThrunaHi,
I already face the same issue and after several days working on this issue and many hours on debugging it seems that interface type is very important if you want to use the form in WD4A (this requirement is confirmed by SAP thru an OSS message for me )
Does the interface based on DDIC or XML ?
If it's a DDIC interface , sorry that can't works in WD4A as interactive forms. You must define the interface as based on XML for this .
Hope this help you.
PS : Finally ,as my forms was very complicated my customer decide to not make it available in WD4A .....
Maybe you are looking for
-
Time machine stops in the middle of first backup
I just bought a LaCie external hard drive, plugged it into my Mac Mini and started Time Machine. Everything looked fine but at 20,46 GB it stopped and would not progress any further. I tried to stop the backup but it would not. I restarted, reformatt
-
Anyone knows if the new Mac Mini will work with two 24" Displays DVI (1920X1200, not the Apple LED) (with adaptaters : MiniDisplay --> DVI and Mini-DVI---> DVI) ? Does it work fine as extended desktop ? Thx
-
Facts and Dimension tables.
We have around 6 facts tables and 10 dimensions tables. The ER diagram shows the fact tables are joined. Now how do I arrange these tables in order to form a star schema? Any suggestions?
-
Can you use more than one email address on one account as to enable two or three devices to use imsg as when i add new email address's in settings it just says veriyfying and nothing happens????
-
How to Install Oracle Smart Update Utility
Please help me in installing Oracle Smart update utility to apply patches. Thanks, Mihir Panda