Current IBase Component is not in an active IBase

Hello Everybody,
I have a big problem.
I am using a BAPI for create a Change Request on Solution Manager, this is the bapi BAPI_BUSPROCESSND_CREATEMULTI
The parameters for IBase is 1 and the IBase Component is 3400.
The Change Request is created, but the fields IBase and IBase Component are empty and the message return is "Current IBase Component is not in an active IBase".
I do not know the cause of this.
Please help us whit this.
Regards
Juan

Hello QT,
Have look to note 1030498.
Also from dswp->Solution run Edit-->Initial Data transfer to iBase
Hope this helps,
Dolores

Similar Messages

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

Installing ST-A/PI Addon : "OCS package SAPKITAB9L does not match the current software component vector"

Dear Gurus,
When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
My downloads ;
1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
2 - SAPKITAB9K==> CSR0120031469_0081131.PAT (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
3 - SAPKITAB9L==> CSR0120031469_0076956.PAT   (ST-A/PI , 01Q_731 , Package Level=0002)
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
What could be problem ?
Here is system components ;
SAP_BASIS
740
0005
SAPKB74005
SAP Basis Component
SAP_ABA
740
0005
SAPKA74005
Cross-Application Component
SAP_GWFND
740
0005
SAPK-74005INSAPGWFND
SAP Gateway Foundation 7.40
SAP_UI
740
0006
SAPK-74006INSAPUI
User Interface Technology 7.40
PI_BASIS
740
0005
SAPK-74005INPIBASIS
Basis Plug-In
ST-PI
2008_1_710
0007
SAPKITLRE7
SAP Solution Tools Plug-In
BI_CONT
757
0001
SAPK-75701INBICONT
Business Intelligence Content
BI_CONT_XT
757
0001
SAPK-75701INBICONTXT
Business Intelligence Content for Bobj I
SAP_BW
740
0005
SAPKW74005
SAP Business Warehouse
CPMBPC
801
0005
SAPK-80105INCPMBPC
CPM Business Planning and Consolidation
POASBC
100_731
0005
SAPK-10205INPOASBC
POA Shared Business Components

in 000 client but now i am getting DUMP ;
Category               ABAP Programming Error
Runtime Errors         CALLBACK_REJECTED_BY_WHITELIST
ABAP Program           SAPLSTPA
Application Component BC-CTS
What happened?
    An RFC callback has been prevented due to no corresponding whitelist
    entry being configured. The original RFC called function module "RFC_TP" in
    the target system with destination "CALLTP_WindowsNT". The callback called
     function
    module "TRINT_PROGRESS_INDICATOR" in its own system.
Error analysis
    Function module "RFC_TP" was called. This execute an RFC callback via ABAP
    statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
    . This action resulted in this ABAP short dump.
    This action was triggered explicitly by the application in transaction
    "SAINT               " and in ABAP main program "SAPLSAINT_UI".

Run-time error '429':Active X component can not create an object

Hi Folks,
I am using some VBA code to run logic in BPC for Excel. When i try to click on VBA button, It's giving the below error.However when i am trying to execute same from server it is working fine. Accessing from BPC client only we are facing this problem.
Code have no issues. Is there any specific thing need to mentioned in client when we use VBA programming? Basically we used the VBA program to create the id's in BPC for Excel. So that it will automatically created on fly. Testing was fine interms of working in Server.
" Run-time error '429':Active X component can not create an object ."

Hi,
Are you trying to add a member into the dimension from excel? As you said that this has been already tested in the server and is working fine, I believe, you have taken care of everything.
Now, coming to the point, when you are adding a member in the membersheet, you need to process the dimension. This requires the admin rights. So, please check the task profile of the user ID, with which you are trying from your system. This user ID should be the primary admin.
Hope this helps.
Additionally, can you please elaborate on the steps on what you followed for adding a member from the excel directly?

OCS package SAPK-603DHINISUT does not match the current software component

I'm getting an error in my installation of EHPI4 using the SAPehi tool in the PREP_EXTENSION/EHP_INCLUSION stage that says: OCS package SAPK-603DHINISUT does not match the current software component.
The SPDA_EHP_INCLUSION.log says " Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
3 ETN112 The OCS Package Queue is empty
2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
3 ETN245 The following import prerequisites of OCS Package "SAPK-603DHINISUT" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3 ETN264   In the (alternatively) Requirement set "02":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3WETN492 Required Add-On component "IS-UT" rel."602" is not installed
3 ETN264   In the (alternatively) Requirement set "03":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3WETN493 Not allowed software component "ECC-VPACK" rel."*" is installed
2WETN543 OCS package "SAPK-603DHINISUT" does not match the current software component vector"
I have added the package IS-UT 602 along with all the support packs that go with the IS-UT 602 component but I am still recieving this error. Would anyone have an idea on how to correct this? Any help would be greatly appreciated. Thank you!

I ended up solving the issue with note #1150349. I had to go into transaction SEPS -> INBOX there where several versions of the ACP
IS-UT=====603:
Origin Number Ext. Subject Delivery date/time
CSR0120031469 0032968 PAT IS-UT=====603 07.10.2009 15:30:27
CSR0120031469 0032633 PAT IS-UT=====603 14.10.2009 21:19:46
delete them all out in SEPS and in the EPS\IN folder. Load teh ACP files from the note which corrected the issue. Thank you again for your help!

SPAM/SAINT - OCS package does not match current software component vector

Hello Experts,
This could happen on any type of system I suspect, but it is on my Solution Manager (7.01 on Eh1). I downloaded a support stack (27)and was checking the components requirements. I use the Directory box in SPAM, and I go into New Support Packages. I highlight the support package for ST 400 then click on the Queue button. It comes back with this message: OCS package SAPKITL437 does not match the current software component vector.
I click continue and the requirements window comes up. It shows that I have currently loaded the wrong BI_Content. It says: Non-permitted release of add-on BI_CONT installed. The release information is BI_CONT,706.
If I go back to the main window to look at the current package level, I see that BI_CONT component release (loaded) is 704 - sp 8.
I must have gotten very creative when loading that back in 2008. MOPZ was used, but it was before the support stack restrictions were in place on my system.
I can't get around this issue, because even trying to load the Basis support package I get this message.
If anyone has had the problem and knows what to do I would appreciate some help. Notes searching has not found anything. So far my Customer message has not been helpfull, but it is not SAP support .
Pat

Hi Patricia,
Please, check prerequisites for SAPKITL437 in SPAM.
It seems like you need to install/update some components in SAINT before.
From official note: https://service.sap.com/sap/support/notes/1274287
"Requirements with component ST400 for SP27
- Support Package 00 for BI_CONT 706 (SAPK-706BHINBICONT)
- Support Package 00 for ST-BCO 400 (SAPK-400AGINSTBCO)"
Additional info: https://service.sap.com/sap/support/notes/1169247
Best Regards,
Aleh
Edited by: Aleh Mikhniuk on Jul 20, 2011 1:59 PM

OCS package SAPKITAC4E does not match the current software component vector

Hello Experts,
I am running EHP4 upgrade on ECC system, I have downloaded files from MOPZ, I got an error message in PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION, error is as follows,
Last error code set: Unable to generate addon queue. Return Code = 1, Reason = "OCS package SAPKITAC4E does not match the current software component vector", check log file 'SPDA_EHP_INCLUSION.LOG' for details
As per the log 'SPDA_EHP_INCLUSION.LOG' it is looking for BBP CRM patches, error message is as follows,
3 ETN490 Use the Add-On installation package "SAPKITAC4E" (type &4"AOI") for Add-On &2"ST-A/PI" rel.&3"01M_CRM570"
3 ETN245 The following import prerequisites of OCS Package "SAPKITAC4E" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN491 Required software component "BBPCRM" rel."500" is not installed
3 ETN264   In the (alternatively) Requirement set "02":
3WETN491 Required software component "BBPCRM" rel."510" is not installed
3 ETN264   In the (alternatively) Requirement set "03":
3WETN491 Required software component "BBPCRM" rel."520" is not installed
3 ETN264   In the (alternatively) Requirement set "04":
3WETN491 Required software component "BBPCRM" rel."600" is not installed
3 ETN264   In the (alternatively) Requirement set "05":
3WETN491 Required software component "BBPCRM" rel."700" is not installed
3 ETN264   In the (alternatively) Requirement set "06":
3WETN491 Required software component "BBPCRM" rel."701" is not installed
2WETN543 OCS package "SAPKITAC4E" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251   End of phase: "'Add-on Queue Calculation'"
1 ETN254       End date: "02.08.2011"
1 ETN255       End time: "23:30:08"
1 ETN214 ."**************************************************"
BBP CRM is not installed in our ECC system, I am not sure why it is required.
Can you please advise me how to move forward without installing BBPCRM.
Regards,
Fazil

If someone one found the following errors during SAP ECC6-EHP6 implementation with Software Update Manager:
1:
Error message set: 'Unable to generate addon queue. Return Code = 1, Reason = "Extended attribute STACK_XML_REQUIRED for SAPK-100AHINUI2FND is unknown"
Solution:
Please update the SPAM/SAINT version with latest available at OSS site, then restart the implementation with INIT option.
2:
Error message set: 'RFC error system DEV nr 00 function 'SPDA_READ_NEW_PACKAGES' failed with code 3 key CALL_FUNCTION_NOT_FOUND: Function module "OCS_CHECK_PATH_CONSISTENCY" not found.
Restart the Software Update Manager and SAP instance. If possible then update SAP Kernel with latest available patch, R3trans and tp as well.
Regards.

OCS package SAPKITL437 does not match the current software component vector

I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
Lalit Kumar

I have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
Lalit Kumar

OCS package does not match the current software component vector

Hello TECHIES,
Please help me with following error it is very emergency
We had developed an ADD-ON in CRM7.0 and when we try to Install in it into CRM EHP1 server
we get the following error:
OCS package does not match the current software component vector"

"emergency" errors should be handled through OSS/CSN, not here on the forum.
The error message means that the source system has a different support package level than the target system.
Markus

No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José Espases

Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com

HT1414 The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert anothe

The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert another sim card from a supported carrier or request that this iphone be unlocked by your carrier.please contact apple for more information.

I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

OCS package SAPK-60501INEAPS does not match the current software component

Hi Friends.
I installed NetWeaver 7.02 with ECC 605. When I try to update EA-PS component (SAPKGPPD16) with SPAM (7.02/0043) to SAPK-60501INEAPS, I got the following errors:
- OCS package SAPK-60501INEAPS does not match the current software component vector
- EA-PS,605 Non-permitted release of add-on EA-PS installed

I downloaded K-605DHINEAPS.SAR from marketplace.
In the note 1456663 there is a workaround for SEM_BW and FINBASIS components.
"Load ACP (attribute change package).
Before starting the installation of SEM_BW or FINBASIS load the attached file "ACP_EHP5_on_NW702.SAR" into your system (Transaction SPAM -> Support Package -> Load Packages -> from Frontend). Otherwise the installation will require a stack XML file which cannot be provided for this scenario."
My question is, I just can generate the stack XML file with Solution Manager?
Best regards.
Cesar Teixeira

ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.

When I generate a pdf Reporte using <af:fileDownloadActionListene> and Ireport this erros fires when i click active tab.
I'm Using Studio Edition Version 11.1.2.3.0:
pt1 is a <af:pageTemplate>
cil2 us <af:commandImageLink disabled="#{!bindings.CreateInsertEnc.enabled}" id="cil2"
<af:commandImageLink id="cil11"
binding="#{backingBeanScope.BakingDocument.cil11}"
icon="/Pictures/printer.png"
shortDesc="Print">
<af:fileDownloadActionListener method="#{backingBeanScope.BakingCotizar.PrintDoc}"/>
</af:commandImageLink>
Error Log:
java.lang.IllegalStateException: ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.
     at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.unregisterComponent(PageDataUpdateManager.java:600)
     at oracle.adfinternal.view.faces.context.RichPhaseListener.handleStartAndStopActiveData(RichPhaseListener.java:478)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:487)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Don't work, all iterator have ChaangeEventPolicy: default none.
And adfc-config.xml has ChaangeEventPolicy unchequed.
Another suggestion please. I need a solution so fast.

Component Usage Does Not Have an Active Component

Hi All,
I get the following error "Component Usage MASTERS_ALV Does Not Have an Active Component" i got the same type of error before and resolved but now i forgor how to do can any one help me in resolving this error.

Hi ,,
In WDDOINIT hook method you need to instantiate the component usage otherwise you will get such type of dump.
Paste the below code in WDDOINIT hook method view or component controller doinit then you will not get dump
data lo_cmp_usage_alv type ref to if_wd_component_usage.
lo_cmp_usage_alv = wd_this->wd_masters_alv( ).
if lo_cmp_usage_alv->has_active_component( ) is INITIAL.
lo_cmp_usage_alv->create_Component( ).
endif.
Regards,
Devi

Required Itunes component is not installed -42404

My system is Windows 7 64bit. After the iTunes update to 10.3, iTunes is now unusable, will not reconize my iphone.
Get the following messages
Required iTunes component is not installed -42404
Could not purchase required iTunes compoenet is not installed.
I got a message that my IPhone was not reconnized also and that I needed to re-set to factory default which I did, but now I lost all the apps on the iphone and I can not reinstall iTunes without receiving these error messages. No problems with Itunes until this new update.
I have followed the suggestions to completeley uninstall iTunes and all the components including QuickTIme and MobileME.   I have done this 3 times now. The last error message was regarding iTunes Helper.
Really frustrating as I can not install Itunes so that I can reinstall my apps and music on my iPhone. Any help would be greatly apprecaited.

Hi, I've had exactly the same issue as the chap who first posted. Don't really want to have to re-install iTunes and lose all the stuff/iPhone backups I've got on there. I've rune the diagnostics as mentioned; please see below:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
INTELR AWRDACPI
iTunes 10.4.0.80
QuickTime 7.6.9
Apple Application Support 1.5.2
iPod Updater Library [Error:0000000D]
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0012ACB80A0DBBB8
Current user is an administrator.
The current local date and time is 2011-08-16 21:28:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 6800
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d5b1c7246190ab8289f67d3e590bcbb3
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {711D230C-2B09-4DF9-B298-0F8A66D46DD0}
Description:          NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter - Packet Scheduler Miniport
IP Address:          192.168.1.66
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.254
DHCP Enabled:          Yes
DHCP Server:          192.168.1.254
Lease Obtained:          Tue Aug 16 21:22:10 2011
Lease Expires:          Wed Aug 17 21:22:10 2011
DNS Servers:          192.168.1.254
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-08-16 21:24:16.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0), Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp CD/DVDW TS-H552U, Rev US06
Audio CD in drive.
Found 12 songs on CD, playing time 51:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:44:68
Track 3, start time 07:07:08
Track 4, start time 11:12:72
Track 5, start time 15:30:35
Track 6, start time 20:39:22
Track 7, start time 25:50:40
Track 8, start time 28:54:65
Track 9, start time 33:01:69
Track 10, start time 38:22:40
Track 11, start time 41:58:62
Track 12, start time 45:58:43
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   40.
The drive CDRW speeds are:   40.
The drive DVDR speeds are:   40.
The drive DVDRW speeds are:   40.
**** Device Connectivity Tests ****
iPodService 10.4.0.80 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 4.3.3
Serial Number:          86*********
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
Any help much appreciated!

Current IBase Component is not in an active IBase

Similar Messages

Maybe you are looking for