Curve 8520, 2 little things I would like to know.

Hello everyone,
I have a Black Berry Curve 8520 and I would like to know 2 things.
First:
I would like to know how to add a contact from a text message, like I just gave my number to my mate and he sends me a text how can I add his number to my contacts from his text ?
Second:
When some one sends me a text or calls, it comes up with there number not there name that I put as they are in my contacts, how can I make it come up with there name instead of the number because I never remember numbers ?
Thanks in advance to those who help me.

I am now able to connect to the Internet on my laptop via my Blackberry's data plan using Verizon.
I'm somewhat lost with this question or the way it was worded which isn't hard for me most of the time.
You are able to connect with your laptop over the internet using your Blackberry to access files available on your laptop or are you referring to using the iPhone as an internet connection device for your laptop?
Message was edited by: Allan Sampson

Similar Messages

  • Things I would like to know before I purchase an iPhone

    I am considering purchasing an iphone but need to know if it is capible of a few things first. I teach online classes and when I travel, I need to log in to my course sites to check work and communicate. I also meet my classes weekly for a group chat. Does anyone know if:
    I would be able to log on to secure sites
    participate in chat sessions
    log on to and check several different email accounts? (I am guessing I would only setup my personal email on the iphone but have two work email accounts I need to check regularly.)
    I don't travel that often but am torn between buying an iphone or a data access card for my laptop. The data access card would cost me $60 per month which is excessive because i already have boardband at home and work so would not use it that much. Iphone data access would only cost me an additional $20 per month added to my current at&t phone plan so if it would work for these things I mentioned it would make sense. the other thing I would use it for is to log on to logmein.com to check my home security cameras. That alone would make it work it, I just can't find any information to asure me I could access these secure sites with an iPhone. Any feedback would be appreciated.

    I am now able to connect to the Internet on my laptop via my Blackberry's data plan using Verizon.
    I'm somewhat lost with this question or the way it was worded which isn't hard for me most of the time.
    You are able to connect with your laptop over the internet using your Blackberry to access files available on your laptop or are you referring to using the iPhone as an internet connection device for your laptop?
    Message was edited by: Allan Sampson

  • Things I would like to know before updating to KitKat

    Hi everyone,
    Am new to Sony and am delaying doing the update via PCC or SUS until the bugs I have read about are sorted.  Meanwhile i have a couple of questions which I cannot find answers to. 
    How do I get rid of the notification I have on my phone telling me 14.3.A.0.681 is waiting? selecting 'clear' does not work. 
    I read about the upcoming fixes due shortly but does that mean I will need to go ahead and install the 'buggy' 14.3.A.0.681 beforehand OR will a complete new KitKat be available to replace Jellybean? 
    Have noted alexdon's advice of things to be aware of before updating but should the phone be on or off? 
    Presumably MTP needs to be activated and USB debugging on?
    Generally is it wise to do a factory reset after FW update?
    Sorry to ask so many questions but updating Samsung Galaxy via Kies was never straightforward so want to be prepared this time and hopefully any responses will help others too.  Thank you
    Solved!
    Go to Solution.

    You cannot get rid of the notification until you update,if you clear data for update centre it will come back.
    It seems that you can wait for the next update without installing this one,but I am not sure if it will work fine when you update.
    The phone must be turned on for PC companion(I updated to kitkat about 4 days ago and it needed the phone on).Sony update service needs the phone turned off because it first checks for the firmware version.
    You need to have MTP enabled.
    About the factory reset,it is not necessarily.I have not done factory resets and I do not encounter big problems with the KK(only the loudpeaker-earspeaker thing).Even before,on my Xperia P,I have not reseted to factory settings after each update.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • My ipad was stolen and i would like to know what i can do so that the person who has it dosent get into my personal things

    hi my ipad was stolen n i would like to know besides reporting to police what can i do because i have inportant things can i block it from them using my ipad

    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668

  • I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and other things I might install on my computer. With a PC it's really easy, you just go to the control panel.

    I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.

    See these:
    Switching from Windows to Mac OS X,
    Mac Basics—Tutorials on using a Mac,
    Mac OS X keyboard shortcuts,
    Apple How-To Guides for Mac OS X,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual, Mavericks Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • I lost my iphone and i would like to know how would i be able to back up the things that are on my phone with out me having the phone

    I would like to know how would I be able to back up my phone with out me having the phone with me ?

    sherrickia21 wrote:
    I had my contacts and everything else back up
    Then you can restore from that backup with the new iPhone.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/ht1766

  • Hello, I would like to know how I can open a file without downloading it? Thank you

    Hello, I would like to know how I can open a file without downloading it? Thank you

    matrix wrote in message
    news:[email protected]..
    > I tried that, attached is the vi.
    > My actual aim is to allow data to be plotted to the graph 4 24 hours,
    > after which, it should clear the chart and start at the beginning
    > agin.
    > Does this vi do this.
    No. The attached is the simplest way of modifying it to do as you want. I've
    sped things up a little to make it obvious.
    > Will the array be able to keep all the data, is there a way i can do
    > it without arrays, i.e. kind of dynamically, and therefore try to save
    > memory usage.
    You already are. You're making the arrays as you go along so only the memory
    needed for the data that's in the plot is in use at any one time. To do it
    without storing
    arrays at all you'd need to keep retrieving the data from
    the XYgraph, adding the new datapoint and writing it back. Messy and I
    suspect incredibly inefficient.
    You're going to use the memory in any case- a better option would be to
    pre-initialise an array and fill it slowly. At the end of each 24 hour block
    zap all the data and start again without destroying and recreating the
    arrays. Or if you're only doing the 24 hour wipes to save memory, simply
    start again at the start of the buffer woithout erasing the previous data
    and you always have 24 hours of data to liik at once the system's running.
    Do a search for keywords like "pre initialise" or "circular buffer" on
    ni.com
    [Attachment xy-time_modified.vi, see below]
    Attachments:
    xy-time_modified.vi ‏51 KB

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

    I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
    Let me explain:
    In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
    Thanks for your time! If you need more information just ask.
    (I believe both my iPod and iTunes are up to date)

    I believe you just are able to delete them from iTunes.
    Hope it will be helpful

  • I would like to  know through which ref document they have created returns.

    Order -deliverypgibilling
    When they take goods return I would like know with ref which document they have taken return.
    They created return order I am confusing they have taken with ref to sales doc or delivery or billing.
    I would like to know  through which ref document they have created returns.
    Where can I see this one?

    Hi Aditya,
    First of all I would like to clarify one thing.
    Returns sales order can be created with reference or with out reference.
    Genereally Returns order will be created with reference to sales order or invoice document no.
    The reference document no can be seen in the document flow of the return document.
    Regards,
    Mallesh.
    Edited by: Mallesh on Apr 23, 2008 11:25 AM

  • Hi Dude,     I ve seen all the threads from first to last even am gonna geta iphone 4s from Thailand. Would like to know which sim will be working fine in chennai as you all are using d phone for past many days???  Is it advisable to buy a phone

    Hi Dude,
    I ve seen all the threads from first to last even am gonna get a iphone 4s from Thailand. Would like to know which sim will be working fine in chennai as you all are using d phone for past many days???  Is it advisable to buy a phone from abroad.

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate

    Hi, I have a iphone 4 with IOS 5.1.1 baseband 04.12.01 AT&T recently release me but I have presented a problem with the activation of the device, I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate hopefully help me with this problem and I have 3 months with the phone saying same message ...
    thank you very much ...

    but can not be unlocked
    If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T.  It CAN'T be used with Tigo or Movistar.
    Your post makes very little sense.  Maybe you can get some help with English. 

  • I have jvc gy-hm100 video cam.I would like to know which format is best for final cut pro?

    My camera has a every size of resoloution. From 1080-60/30 to 720-24.It is totally compatiable with FCP.What i would like to know is what format is recomended for music video's and film production.Any info is greatly apprec!!!! Thank you!
    P.S. Ive been producing music for 15 years.Recording on Logic plat.Mastering and remixing every thing. I love mac!!! Now going into video i want to be just Pro with it as i have been with my music.I purchased the jvc because Mac Recomended it and how it plugs right in. FCP 7 is intense!

    All the available formats are "OK" for FCP7, the more important question is what's good for the movies you want to make?
    In my limited experience, music videos tend to favor 24p for it's "film-like" qualities. The 1080 vs. 720 decision is frequently based on intended use; if you're going to release on the web, 720 is fine and brings much less filesize and overhead to the edit.
    My personal preference is towards high-bandwidth footage like the 35Mbps HQ Mode your camera offers because it behaves so nicely in Color.  Many people advise staying away from interlaced (HDV) footage unless you totally need it for action scenes.
    I think the last 4-5 music videos I've done were all 720p24 and were web released.
    Hope this helps...

  • I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
    -Kevin P.
    Message Edited by Kevin Price on 12-01-2006 02:42 PM
    Attachments:
    Binning example.vi ‏51 KB
    Binning example.png ‏12 KB

  • I have reached out  to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know why it went black

    I have reached out  to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know
    1. Why it went black and is there a permanent fix for this
    2.Will the IOS gets automatically updated as I feel the IOS was 5 when I got the phone in 2012 december
    3.Do you suggest 7.1 for Iphone 4

    1. There is no way of knowing. These things happen.
    2. The iOS only gets updated when you want it to be.
    3. You should always update to the latest iOS your phone will support. Apple do not write the updates to make your experience worse.

Maybe you are looking for

  • E72 connected to wifi but 'invalid server name' pr...

    I had no problems connecting to the wifi at the mobile phone shop but have the 'invalid server name' problem at home. however, my husband who is using Nokia too has no problems using the home wifi on his phone.  it shows that the phone is connected t

  • How do i create this kind of effect

    Hi i was just wondering if anyone knows of any tutorials or anything on creating this kind of effect. Do you think it was done in after effects? Its the 3d camera pan at around the 2:40 mark of the video. http://www.coreonlinemagazine.com/index.php/a

  • Getting notepad's current  font

    My application opens rtf,txt files in a JTextPane. These files can have font type like english / hindi or any other font. I am able to open any rtf file. But My PROBLEM is in opening a .txt file as i am not able to get Default notepad font. CAN ANYON

  • Passing selection table as parameter to function modules

    i tried to pass a selection table as a parameter to a function module but there is a problem stating the eror the table length is different. *& Report  ZSFSELECT_OPTIONS_PGM REPORT  zsfselect_options_pgm. TABLES zselect_options. SELECT-OPTIONS sop FO

  • Pages for drawing, not bad at all.

    I tried to take Pages a little over its limits the other day and started using it just for drawing, (just for the fun of it) I know this aint Photoshop but hey you can do some nice stuff, what you think?