Custom 2-week timecard layout not saving hours on 2nd Monday on 2nd row

We have a custom timecard layout, based on the projects and payroll layout, that moves the comments from the details page to the front page after each day's hours field.
It is working fine when used with a one-week timespan, but for 2 weeks, there is a strange problem. If you enter row 1 with no hours on the second Monday, then try to enter row 2 with hours on the second Monday, it will not save those hours. Instead, the hours are erased and the field blanked out. It will save hours on other days, but not the second Monday. Also, if you hit Continue, the hours are blanked out on the second Monday.
Anyone else experienced this?

Yes, thanks, I have found it.
Independently, I discovered the problem with the timecard. In the two week format, the second Monday hours input element had an ID of B2822, which was the same ID of the comments for the second Tuesday.
The sequencing for the ids for the hours input fields is B2210 .. B2227, B2228, B2229 etc.
The sequencing for the ids for the comments input fields is B2810, .. B2821, B2822, B2823, etc.
It would appear in our case that when the timecard layout is generated, the second Monday on the second row gets an ID of B2822 when it should be B2228, which seems to be a typo somewhere.
Once I understood the problem, following Ramu's suggestion that it was a known bug, I was able to search metalink using the search term 'OTL hours not saved' and found patch 6368806, which addresses a similar problem with a different layout. I will post an update if that patch resolves the problem.
Note:467906.1 and Note:467483.1 have more information.

Similar Messages

Customer & Material Master data is not saved in SAP 4.7

Hi All,
We created a customer in T code XD01 and saved it. system threw a message that "customer 500001 has been saved" but when I tried to check the customer ID 500001 in XD02 and XD03, it says custoemr 500001 has not been created.
I have checked in table KNA1, KNB1 & KNVV. No data is available in these tables.
Same case with material master data even.
Can anyone please tell me what could be the reason for this problem & how to fix it.
Thanks in advance.
JM

Dear JM,
Goto SNRO- Enter the number range object & click on "Change " icon.
NR Object: DEBITOR
Check whether any value maintained in "No. of numbers in buffer", make it blank & re-create customer.
It may not be exact route cause of the problem, but could be the reason .
Test & update the forum.
Regards,
Reazuddin MD

Screen layout not saved

Hi!
When I change the size of the filmstrip and of the right panel, they are not saved after leaving LR. When restarting, they have the old size again. This worked better in the Beta 4.1. (I did not try changing the size of the upper and left panel.)
Bye . . . Joerg Wirtgen

Thanks for that, Brian. Maybe some more folks will chime in.
I've noticed (with interest) that there seem to be a fair number of photographers running LR with only a single monitor setup. It would be unthinkable for a video editor (my primary function) to operate with less than 2 monitors (3 would be better if I had the room, but I don't because of that pesky NTSC broadcast monitor I need to use). But maybe for photo-centric operations a nice widescreen flat panel does just fine.
I wonder if just having the desktop stretched across 2 monitors is involved in this. As soon as I get some down time, I'll try switching to clone mode and see what happens.

Imported pics are not saved

I'm using iPhoto 11 version 9.15.
Since a few weeks iPhoto is not saving my imported pics anymore. Each time I'm importing my pics from my iPhone or my SD card it seems to be ok. But after I restart iPhoto the next time all the pics are lost. And I have to import them again. Luck for me that I didn't delete them on the card or iPhone.
I looked at the apple support page, but I couldn't find any software updates.
Anyone an idea what the problem could be? I'm pretty new in the apple world, and don't have much experience in the mac system.
Thx for your help
Timo

Damaged database file.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Issue in custom component in custom timecard layout-OTL

Hi,
I have created a custom layout based on seeded layout.Added new custom component Dept reference field to the sedded layout.
When trying to save the timecard template including dept reference field completed.The saved timecard template is dropping Dept reference filed.therefore,it is also dropped from the exported/downloaded .csv file.
code details:
BEGIN HXC_LAYOUT_COMPONENTS
"US Projects Alternate Timecard Layout-Dep field"
OWNER = "CUSTOM"
SEQUENCE = "226"
COMPONENT_DEFINITION = "TEXT_FIELD"
RENDER_TYPE = "WEB"
PARENT_COMPONENT="US Projects Alternate Timecard Layout-Day Scope Building blocks for worker timecard matrix"
REGION_CODE="HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME="HXC"
ATTRIBUTE_CODE="DEPT_REF"
ATTRIBUTE_CODE_APP_SHORT_NAME="HXC"
LAST_UPDATE_DATE = "2004/05/23"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS
"US Projects Alternate Timecard Layout-Dep field"
OWNER = "CUSTOM"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
QUALIFIER_ATTRIBUTE1 = "N"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "5"
QUALIFIER_ATTRIBUTE4 = "1"
QUALIFIER_ATTRIBUTE5 = "30"
QUALIFIER_ATTRIBUTE18 = "EXCLUDE"
QUALIFIER_ATTRIBUTE19 = "|TEMPLATE|CSV|"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "HRP"
QUALIFIER_ATTRIBUTE27 = "Attribute3"
LAST_UPDATE_DATE = "2004/05/23"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
Please help me in this regard....
Thanks
Sri...

Did you update the export layout too and added that to preferences?
--Shiv

SRM 7.0 customer fields not saved in shopping cart

Dear experts,
I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document.
Any clues?
Another question, which is a bit techno, is when i have extended the SC screen using the enhancement framework instead of using the standard extension options. i would have thought that by binding these fields to the standard header node with the custom fields as structure would have saved me the job of throwing data and fetching data from the table/bapi. This isn't working either. I reckon the problem will be related to issue #1 above.
Regards
Ali

>
Muhammad Ali Mahmood wrote:
> Dear experts,
>
> I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document.
> Any clues?
Hello Ali,
did you extend both the structure INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF? It should be useful to define a custom structure that contains your fields and append it to both the structure named above. Then re-check if the metadata structure has been enhanced properly (in your case, view /SAPSRM/V_MDF_IC).
Hope this helps,
Matteo
EDIT: I was assuming you were intended to add new fields at item level. If your task is to add fields @ header level, simply substitute HEADER to ITEM in the structure's name.
Edited by: Matteo Montalto on Dec 7, 2009 12:14 PM

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

Custom genres not saved

Hi,
I decided to replace the default "Classical" Genre by something more specific in my iTunes music collection but find that the changes are not saved in the database for existing titles. A number of new entries added since and assigned to the new custom genres are correct, and all custom genres added are also in the list; it is only with the older titles that the change of genres is not saved but always reset to "Classical" when I close the menu.
Apart from that I would have expected that I can also search the database by genre, but this is not the case.
I consider both of these issues, especially the first one, a bug. Is that the case or am I doing something wrong? I'm using iTunes 10.1 (54).

First thing:
Are you saying that if you modify a song's info and change the Genre it does not accept the change?

Firefox v30 Privacy settings: Use customs settings are not saved

After changing privacy settings to
-> Use custom settings for history
[X] Always use private browsing mode
[_] Remember my browsing and download history
[_] Remember search and form history
[X] Accept cookies from sites
Accept third-party cookies: [Always]
Keep until: [I close Firefox ]
When exiting Firefox and relaunching it, this settings is gone.
and 'reset to [Remember history]
Any suggestions as to how to solve this?
Thanks
=

Sorry, to reset firefox will require me to install a number of plug-ins.
All my settings were lost.
Luckely I created a backup using MozBackup.exe.
Some add-ons can easily be re-installed, but what about stuff like Acrobat PDF creator and Norton Vulnerability Protection. I think those add-ons are installed when an application is installed, so it would require me to re-install such applicatons.
Preferences not saved: nothing is write protected.
Deep sigh...
=

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

Customer columns in MM46 will not be saved

Dear experts,
I have one problem:
There is the MM46 where the material mass update for data in some tables can be performed.
I need to enhance the table MVKE with 3 additionall columns...I did it and now I can see those columns in the MM46 (I used the note 44410 for doing this).
But the changes I perform in the columns will still be not saved, so i found the another Note 1024725, which exactly describes my problem and due to this note I need to implement two following BAdi's with some methodes:
first one: WRF_MAT_MAINTAINDATA (Method MODIFY_GENERAL_DATA)
second one: ARTMAS_BAPI_EXTEND (Method MODIFY_MMD_DATA)
But I don't really know how, that's why my question:
is there any examplase for implementation of these methodes or some kind of reference code, where standart fields will be updated, so I can check this logic for my purpose?
Denis

Hi
You can change the message from NWDS if required. As you have checked it in R/3 and data is available , might it could be problem of custome message which is there for UI or soem validation , Send the error log when this error is coming so we can better introspect it .
BR
Satish Kumar

2013 Custom Web Parts in Page Layouts not showing for users

Custom Web Parts in Page Layouts not showing for users
I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
Any help would be appreciated, Havent found anything on this issue online. weird.

It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
John Architect

Changes to printed doc layout not being saved (Robohelp 8)

Whenever I make a change to the TOC in my printed document layout, (i.e., deleting a page or reorganizing the pages), the change is not saved. I have to completely rebuild that chapter. This worked fine in version 6, but is a consistent problem in version 8.

I don't think we're communicating well.
I understand that I only get the Save option if I access the layout via Properties, and that I only get the Finish option if I access the layout via Generate. Those are the two methods I am using. And neither of them will retain the changes I make to my printed document layout.
Please try these steps yourself and let me know if the change is saved for you:
1. Open the CCC sample project.
2. Open the Style Mapping printed document layout, using Properties or Generate.
3. Use the down arrow icon to move the page titled Celebrations beneath the page titled Phone Numbers.
4. Click Save or Finish.

When i attach workflow to document library, the custom columns data is not saving.

Hi, i had created SharePoint designer workflow (send Email) for Document Library.
I had created Custom columns like.
"Employee Name" of type Person or Group
"Resume Type" of type Choice
When i attach my workflow to document library, the columns data is not saved.
It is just uploading resume, and sends email to the user groups, but data is not saved for custom columns. !.e "Employee Name" and "Resume Type".
Any help will be appreciated.

In SharePoint Document Library, first the document will be uploaded and then the metadata will be updated. So, in your workflow settings, select start workflow when item is changed instead of item is created and then try.

Custom 2-week timecard layout not saving hours on 2nd Monday on 2nd row

Similar Messages

Maybe you are looking for