Custom DataSources for Hierarchies  / Missing entry in ROOSGEN

Hi,
I have created a master data dataSource and
changed the corresponding entries in the customizing tables.
The extractors works fine. In the monitor
I can see the records of the request, but
after a while the monitor shows a red light.
I got the following message:
Syntax error in generated program, row 0
Message RSAR683
The corresponding generation template is RSAPTH3.
At the beginning of the template a function module
is called. This function module get its information
form ROOSGEN.
How to get entries in ROOSGEN (RSTRANSACTIVATE*ALL)
does not work.)? Are there other approaches?
Can you help me to become the lights green?
Regards & Thanks,
Guido
P. S.: I have done the same in BW2.0
and has been working.
Okay not for intervals in a hierarchy
P. P. S.: I need to supply intervals. Otherwise
the hierarchy will be to huge for reporting ( >= 200.000 elements).
P. P. P. S.: Other ideas/approaches to makes
a hierarchy with more than 100.000 elements reportable.
For balanced hierarchies: navigation attributes, ...
For unbalanced hierarchies: ?

Hi Guido,
this pretty much looks like a program error.
Depending on the BW release, sap notes 944842 or 500913 apply. I assume that as a consequence the roosgen entry is missing. Otherwise it is straightforward the transfer structure name should appear in field TFSTRUC.
If not I recommend to open a new message for the customer.
Regards, Matthias

Similar Messages

  • Configuring measures with custom aggregation for hierarchies

    Can I Configuring different measures with different aggregation for hierarchies . in AWM the aggregation for measures are disabled, am I missing something.
    For example
    Dimension : supplier
    Measure : risk score
    Aggregation : maximum
    Dimension : supplier
    Measure : spent
    Aggregation : sum

    Yes it is possible. But make sure that you have turned the compression off in the cube

  • Custom Datasource for infoobject

    Hello Guru
    i have created a custom datasource on a SAP table (custom table) to update data from SAP into an infoobject in BW. Everithing works correclty but when i delete an entry in the custom table and update this in BW the entry in the infoobject is not deleted.
    The infopackage and DTP are FULL.
    How can i fix this problem and have always SAP table alligned with master data in the infoobject (new entry and DELETE entry)?
    thanks
    Boris

    As you have created the generic extractor ans alos you are running
    the full load.
    In case of standard extractor delta will be handeled by the
    extractor itself ,but it is not the same with the custom one.
    We face one scenerio with the generic extractor.
    1.Customer used to craete the notification on some date.
    2.The same notification was deleted on some other day.
    3.As in bw t=we load the previos day data.
    4.So we were facing the problem like notification in
    the r/3 side was deleted but they were still there in the BI side.
    What we did is there is one field ie deletion flag and it set to 'X'
    whenever we delete any record by default it is blank.
    So we included the deletion flag file din the extractor and
    create the same in the BW side.
    At lat we restricted the query by filter "blank'.
    So it was not showing the deleted notification in the report.
    Thanks,
    Saveen

  • Is there any Contact Manager or Address Book that I can install on my PC (Windows 7) that when synced to my Iphone that will accept my custom Lables for type of entry, such as you have- Home, Work, then "Private Line" ?

    I am wondering if in fact there is any Contact Manager or Address Book that I can install on my PC running Windows7 that when synced with my 4s that it will retain all my custom lables for phone numbers in Contacts on my iPhone, such as Sandra's Private Line, Cadillac, Bat Phone or what ever?

    Hi sahgin,
    The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
    I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

  • Custom DataSources for use in BIP Reporting

    Hello,
    Is there any further documentation on custom data sources besides the one page at the end of the Custom Reporting Configuration guide?
    Thanks,
    Drew

    Unfortunately, we have very few predefine report parameters.
    There are several PQS related ones - let me know if you are interested in them.
    Otherwise, there is:
    <li>"String" - a text box,
    <li>"Date" - a date control,
    <li>"MonthYear" - allows selection of the month and year.
    <li>"GSMWorkflow" - an EQT/Search control for workflow templates
    <li> an EQTInput control allows you to specify an EQT Search as a parameter. So you would define you own parameter using the
    webControl="~/WebCommon/Controls/EQTInput.ascx" and specify the searchable View.
    <li> a Lookup control (single and multi) - You define your own parameter using the
    webControl="ReportingControls/LookupInputSingleSelect.ascx" or webControl="ReportingControls/LookupInputMultiSelect.ascx" and specify the datasource
    However, Extensibility Pack 3.1 (3.2?) has a ReportingExtensions library with some new reporting parameters.
    It also contains an auto launch report page, designed for parameters that are not for user selection. That is, certain parameters can be passed in or read from the session/user and passed to your report without user interaction.
    <li>the ConstantValueParameter allows you to pass in constants to the report without displaying them. For example, if you have a report that takes a parameter like number of months, and you want to 'hard-code' the input to 24, you could do:
    <!-- example report parameters that pass a specific value as a parameter to the reports, as specified in the Value element -->
    <ParameterType type="Constant_Months" webControl="~/WebCommon/Extensions/Reporting/ConstantValueParameter.ascx" >
         <Value>24</Value>
         <IsHidden>true</IsHidden>
    </ParameterType>     then in your Report Parameters section, you would do:
    <Parameter name="Months" label="lblMonths" isLabelTranslatable="false" type="Constant_Months" Required="true"/>               <li> There are also a couple of User related controls, SessionParamCurrentUgmUser and SessionParamCurrentSupplierUser , which allow you to get specific data from the current user (or supplier user)
    <li> And a non-displayed SecuredObjectControl which allows for parameters to be passed in, such as SpecID, FacilityID, via the request, and then evaluated for security, making sure the current user has permissions to that item.
    And of course, you could always write your own control if you have some custom requirements.
    An upcoming release will have some more helpful functionality around report parameters too.

  • Custom Folders For Received Missed Phone Calls

    I am trying to set up individual folders that can be placed on the main screen for the following:
    -Missed Calls
    -Received Calls
    I can create a folder, but can not figure out a way to isolate the call data from my mailbox folder. I do not want phone calls in my mail folder. Also I would love to have some type of icon on the folders. Is there anyway to do this?
    Thanks

    I understood the question, and I thought I answered that.
    Options:
    1--You can see ONLY the call log by opening your Messages folder and pressing Alt + P
    2--You can see ONLY your missed calls by opening your Messages folder > Menu > View Folder > Missed Calls
    3--You can disable your missed calls from your Messages folder by pressing the Green phone dial key to enter the Call Log > Menu > Call Logging  = None. (this does not disable #s 1 and 2).
    I do not know of a what to view ONLY the missed calls in one folder on your home screen.
    Someone else might.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Procedures for implementing a snapshot scenario with custom DataSources

    Hi Gurus,
    I have checked the How To paper ([How to Handle Inventory Management Scenarios in BW (NW2004)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]). However, only SAP standard BW objects are mentioned in the paper e.g. InfoCube (0IC_C03), Material Stock InfoSource (2LIS_03_BX), Material movements IS (2LIS_03_BF) and Revaluations IS (0LIS_03_UM).
    On the contrary, I need to handle custom DataSources for the Snapshot scenario. Are there any differences in the implementation methodology? Which additional aspects should I take into consideration? For example, the load sequence, delta type, etc.
    Could you please list out the step-by-step procedures for such an implementation?
    Thanks in advance!
    Regards,
    Meng

    Hi Meng,
    You can approach this in two ways.
    1) If the volume of data is not much, you can derive the balance at query level, as follows.
    User enters the date, based on this restrict your key figure to display all values less than this date.
    2) If the volume of data is high, then you will have issues with performance if you are calculating the balance in the front end. In this case, you can model this with 'Non cumulative' key figure.  Again there are 2 ways of approaching this back end solution based on the volume of data. ( Say in one case you have 2 years of history in your DSO and in the second case, you have  5 years of history ).
    A) For example, If there are only 2 years of history
    Create a non cumulative Key figure 'ZBALANCE' with inflow and outflow, in a cube.
    Map this to your credit and debit as + and - respectively and map the calender day to posting date.
    Just initialise the dataload with data transfer and start loading the delta as normal.
    You will be able to see the balances for each and every calday in your reporting.
    This approach is straight forward and simple.
    Compress the cube for getting the better performance.
    B) If there are 5 years of history and you are not interested in loading all the 5 years data in getting the balance
    Here you want to have the initial balance, continue delta and would like to load 2 years of history.
    The cube and non cumulative KF are created as mentioned above.
    For generating initial balance, you have to create another DSO without calander day and ZBalance mapped to credits and debits in additive mode. Load your DSO data into this new DSO to generate initial balance. This balance will be loaded to your cube as initial balance. ( Like 2LIS_03_BX ).
    You have to compress this request with marker update ( Must ).
    Load your historical data for 2 years from the original DSO. Compress without marker update ( Must ).
    initialise without data transfer from DSO to cube and load deltas normally.
    Compress the delta requests normally for performance reasons.
    Please read the 'Inventory document' in detail.
    Please let me know, if any of the information is still not clear.
    Thanks,
    Krishnan

  • Custom DataSource plays in JMStudio, but not in my application

    hello everyone. I need someone to help me out who has played around a lot with DataSources.
    I have been playing around with custom DataSources for a small while and I have not been able to figure out something and its starting to get frustrating.
    First let me tell you what process I exactly follow when I want to create a Custom DataSource (using the "Generating Live Audio/Video Data" datasource code sample as an example - from JMF solutions http://java.sun.com/products/java-media/jmf/2.1.1/solutions/LiveData.html):
    1. Suppose the source files (DataSource.java and LiveStream.java) are lying at C:\customds\.
    I compile the files like this:
    javac -d . DataSource.java LiveStream.java
    As a result this directory is formed C:\customds\jmfsample\media\protocol\live which contains all the compiled (interpreted) files.
    2. Then I register 'jmfsample' in the Protocol Prefix list and commit the changes using the JMFRegistry GUI.
    3. Now if I run JMStudio and enter the URL live: it gives me an error that it can't create a player. I feel this is happening because some classpaths haven't been set correctly. Eventually I figured out that I have to place the \jmfsample\media\protocol\live\ directory inside the <JMF install dir>\lib\. Doing this fixes the problem and now I can go to JMStudio and run the protocol using the 'Open URL'. Giving it 'live://' plays the 'blue screen' like a gem.
    4. But here is the catch now. When I create an application which tries to create a player using live:// as a source, it doesn't run and keeps giving me a noPlayerException, or a noDataSourceException (as the case would apply; code given below).
    The funny part is that i checked the JMStudio source code for the method that is used to 'Open URL'. I haven't found any siginificant change in the way it opens urls.
    I also went a step further and tried to compile and run the JMStudio code myself to trace the code when it is in the process of opening a url. The weird thing is that when I try to do that, giving live:// as a URL gives me the same error that is given by my application. In other words JMStudio when compiled by me gives me same the error of "can't create a player..." when I open the url live://. Has Sun used a JMStudio compiled using a different source file?
    Please please anyone tell me what is wrong here.
    I have basically tried out these two kinds of things in my code, and both give me a noPlayerException error:
    Player guiPlayer = Manager.createRealizedPlayer(new MediaLocator("live://"));and
    DataSource ds = Manager.createDataSource("live://");
    Player guiPlayer = Manager.createRealizedPlayer(ds);Thanking in anticipation.
    regards

    Would it be possible for you to expand on your solution a little bit? I'm trying a similar approach, and having a similar problem to yours. From Googling, it appears as if this is a very common problem, and a lot of people give up before they solve it.
    I'm trying to use jmf.jag (and optionally add fobs4jmf.jar), not compile it from source. But I am trying to compile my own protocol from source and run it in a debugger. I have all the class files going out to the same output directory, and IntelliJ generally adds them all to the CLASSPATH automatically. But I keep getting NoPlayerException. (If I break down the players construction step-by-step, it seems to fail on "Processor ps = Manager.createProcessor(ds);".)
    I'm trying to play a Quicktime movie from memory, and I've confirmed that I'm returning "video.quicktime", that my stream is Seekable and isRandomAccess returns true, my prefix is in the protocol list, and that the package name is correct. I've tried with PLUGIN_PLAYER being true or false, media type being video.quicktime or unknown, and every other permutation I can think of.
    Any help would be greatly appreciated.

  • Approval for revoking service entry

    Hi All,
    I have one requirement that system should ask for approval of manager if the user revokes the service entry. Currently there is no release strategy for service entry in the system as the user is only creating and accepting the service entry sheet. They are fine with this, but if user revokes the already accepted service entry then it should ask for manager approval.Is it possible.
    Thanks.

    Hi,
    This is not possible as User have full authorization to revoke the service entry sheet.
    But you can try based on workflow.Do check with workflow consultant whether he can add an logic.
    Custom workflow for releasing service entry sheet

  • Selection criterion in custom DataSource doesn't appear in Infopackage

    Hello everyone!
    I have implemented a custom DataSource for service processes in CRM.
    I have defined a timestamp field as a selection criterion.
    In BW, in the Datasource fields tab, this field appears correctly defined, but it doesn't appear in the InfoPackage selection criteria tab.
    Any thoughts on this? Any help would be greatly appreciated!!
    Best Regards,
    Luís.

    Have you checked the selection option in Data source maintenance..?
    Thanks
    Tripple k

  • Archiving Object - Entry missing in Customizing table for object Z*********

    Hello friends,
    We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
    "Entry missing in Customizing table for object Z******* "
    I have matched my object with few other archiving objects and things looks similar.
    Have you faced this kind of problem..
    thanks
    ashish

    Hi,
    I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
    But when i enter ZSCS_TRAFO, i get this error :
    Entry missing in Customizing table for object ZSCS_TRAFO
    Message no. BA057
    Diagnosis
    A function cannot be executed due to a missing table entry.
    Procedure
    Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
    However, a few other Z objects works well.
    thanks
    ashish

  • Dump during extraction for the custom datasource (ZFI_GL_14).

    Hello all,
    we are using Ecc 6.0 and we havent installed Enhancement Package 3. However our requirement is to create a custom datasource (ZFI_GL_14) similar to the standard one (0FI_GL_14). Initially we created the custom DS same as the standard one with the extraction method using Function Module. By default custom DS was assigned with extraction method F2. By running a program we changed F2 to F1 to resemble the standard one and made it as delta enabled as specified in the standard extractor.
    when we started extracting the custom DS using RSA3, we encountered so many errors and resolved them. However still we are getting some more errors which requires your help.
    1. While testing One of the function module FAGL_GET_LINE_ITEMS, it throws following ABAP dump.
    Short text                                                                               
    |    A dynamically specified FROM clause has an unexpected format.                              
    |What happened?                                                                               
    |    Error in the ABAP Application Program                                                        
    |                                                                               
    |    The current ABAP program "SAPLYPFI_FAGL_ITEMS_SELECT_BW" had to be terminated                
    |     because it has come across a statement that unfortunately cannot be executed.                               
    |Error analysis                                                                               
    |    An exception occurred that is explained in detail below.                                     
    |    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not               
    |     caught in                                                                               
    |    procedure "YPFI_FAGL_GET_LINE_ITEMS" "(FUNCTION)", nor was it propagated by a                
    |     RAISING clause.                                                                             
    |    Since the caller of the procedure could not have anticipated that the                        
    |    exception would occur, the current program is terminated.                                    
    |    The reason for the exception is:                                                             
    |    The running ABAP program attempted to execute an Open SQL statement in                       
       which a FROM clause was specified dynamically in the field "LD_DBTAB_SYNTAX".                
    |     In this                                                                               
    |    FROM clause, either a table name after a join operator is missing, or an                     
    |     alias name after the key name "AS". The field "LD_DBTAB_SYNTAX" could be empty as well.                                                                               
    |Missing RAISING Clause in Interface                                                              
    |    Program                                 SAPLYPFI_FAGL_ITEMS_SELECT_BW                        
    |    Include                                 LYPFI_FAGL_ITEMS_SELECT_BWU01                        
    |    Row                                     1                                                    
    |    Module type                             (FUNCTION)                                           
    |    Module Name                             YPFI_FAGL_GET_LINE_ITEMS                             
    |Trigger Location of Exception                                                                    
    |    Program                                 SAPLYPFI_FAGL_ITEMS_SELECT_BW                        
    |    Include                                 LYPFI_FAGL_ITEMS_SELECT_BWU01                        
    |    Row                                     353                                                  
    |    Module type                             (FUNCTION)                                           
    |    Module Name                             YPFI_FAGL_GET_LINE_ITEMS                             
    |Source Code Extract                                                                               
    |Line |SourceCde                                                                               
    |  323|                                  lt_fields_flexgl                                         
    |  324|                                  lt_fields_table1                                         
    |  325|                                  lt_fields_table2                                         
    |  326|                                  gv_si_table "erste Tab immer Flexgl?                    
    |  327|                                  gc_bkpf                                                  
    |  328|*                                  ' '                  
    |  329|                                  gc_bkpf_aedat       
    |  330|                                  'X'                                                      
    |  331|                            CHANGING ld_dbtab_syntax                                       
    |  332|                                     lt_fldlist_s                                          
    |  333|                                     lt_where_tab[].                                       
    334
    |  335|*       open cursor                                                                        
    |  336|        DESCRIBE TABLE lt_where_tab LINES ld_lines.                                       
    |  337|        IF ld_lines GT 0.                                                                 
    |  338|          delta_dbcnt          = 0.                                                       
    |  339|          old_dbcnt            = 0.                                                        
    |  340|          flag_cursor_open     = 'X'.                                                     
    |  341|          cursor_flag          = 'X'.                                                      
    342
    |  343|          OPEN CURSOR WITH HOLD i_cursor FOR                                               
    |  344|          SELECT (lt_fldlist_s)                                                            
    |  345|            FROM (ld_dbtab_syntax) CLIENT SPECIFIED                                        
    |  346|             WHERE (lt_where_tab).                                                         
    |  347|        ELSE.                                                                               
    |  348|          delta_dbcnt          = 0.                                                        
    |  349|          old_dbcnt            = 0.                                                        
    |  350|          flag_cursor_open     = 'X'.                                                      
    |  351|          cursor_flag          = 'X'.                                                      
    352
    |>>>>>|          OPEN CURSOR WITH HOLD i_cursor FOR                                               
    |  354|          SELECT (lt_fldlist_s)                                                            
    |  355|            FROM (ld_dbtab_syntax) CLIENT SPECIFIED.                                       
    |  356|        ENDIF.                                                                             
    357
    |  358|        st_selection[]  = lt_selection[].                  
    |  359|        st_fieldlist[]  = lt_fieldlist[].                  
    |  360|        sd_dbtab_syntax = ld_dbtab_syntax.             
    |  361|        st_fldlist_s[]  = lt_fldlist_s[].                
    |  362|        st_where_tab[]  = lt_where_tab[].                
    |  363|        st_seltable2[]  = lt_seltable2[].                 
    364
    |  365|      ENDIF.   "cursor_flag                                                               
    366
    |  367|      lt_selection[]  = st_selection[].                 
    |  368|      lt_fieldlist[]  = st_fieldlist[].                                       
    |  369|      ld_dbtab_syntax = sd_dbtab_syntax.        
    |  370|      lt_fldlist_s[]  = st_fldlist_s[].                 
    |  371|      lt_where_tab[]  = st_where_tab[].              
    |  372|      lt_seltable2[]  = st_seltable2[].                   
    Line 353 contains the error.
    1. L_DBTAB_SYNTAX. As per the statement this field should bring the table name, but it is not bringing any value                          whiledebugging.
    2.also lt_fldlist_s should bring the field names.
    As this is for New GL line item datasource, I am not sure what fields should lt_fldlist_s and what table name , and wheretab value should come , so that the function module can extract the data.
    Kindly help me to get an insight into this issue and to get it resolved.
    thanks,
    Praba...

    Hi Frank,
    yes I agree. That was the first question that came to me in my mind. However, the job was handed over to us, and we were able to exactly create the custom DS , FM and Function groups as similar to the standard one and everthing got activated perfectly. But during extraction, it throws the dump.While debugging, the function module is not able to pick the value for the 3 fileds which I stated above in one of my queries. The main extractor for this Datasource is FAGL_GET_SI_DATA and it uses the extract structure FAGLPOSBW.This Main function module in turn calls one more FM, FAGL_GET_LINE_ITEMS by exporting below parameters.
    CALL FUNCTION 'FAGL_GET_LINE_ITEMS'
              EXPORTING
                i_block_data = 'X'
                i_block_size = sd_max_lines
                i_selection  = lt_select_int
                i_fieldlist  = lt_fields_int
                i_initflag   = i_initflag.
          ELSE.
    From my observation ,  the above statements i_selection  = lt_select_int  and i_fieldlist  = lt_fields_int should contain/pass the value to the line items FM, FAGL_GET_LINE_ITEMS.In the above thread also I mentioned I didnt get the value for ld_dbab_syntax, lt_fieldlst_s and ld_where_tab. I believe it is simply because i_selection and i_fieldlist is not getting the value from lt_select_init and lt_fields_init respectivelyImport parameters for this FM is as below.
    I_BLOCK_DATA     TYPE     C
    I_BLOCK_SIZE     TYPE     SY-TABIX
    I_SELECTION                           TYPE     GUSL_T_SELECTION
    I_FIELDLIST                           TYPE     GUSL_T_FIELDS
    I_INITFLAG                           TYPE     GUSL_BOOL
    I_CHANGED_RECORDS      TYPE     GUSL_BOOL
    export parameter for this FM is as below.
    FLAG_CURSOR_OPEN     TYPE     FLAG
    Changing parameter for this FM is as below
    C_T_FAGLPOSE     TYPE     FAGLPOSE_T
    where FAGLPOSE means Fields for Reading Data: Line Items: New General Ledger.GUSL_T_SELECTION is the same type like DDIC table type FB_T_FIELD_SELECT_OPTIONS which will have Fieldname and selection option range.GUSL_T_SELECTION is created within the type group GUSL as mentioned below.
    TYPES: BEGIN OF GUSL_S_SELECTION,
           FIELDNAME LIKE DFIES-FIELDNAME,
           T_RANGE   TYPE GUSL_T_RANGE,
           END   OF GUSL_S_SELECTION,
           GUSL_T_SELECTION TYPE GUSL_S_SELECTION OCCURS 20.
    wherein
    FIELDNAME LIKE DFIES-FIELDNAME,
    DFIES: --> DD Interface: Table Fields for DDIF_FIELDINFO_GET. Also GUSL_T_FIELDS refers to DFIES.
    Regards,
    Praba..

  • Select option greyed out for fields of custom DataSource (rso2, rsa6)

    Hi
    Why are several fields, in my custom DataSource (created in rso2) not available for select?
    I do not think this is a permission issue, since several fields are selectable, but not all fields.
    It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
    This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
    I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
    What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
    I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
    Is this safe?
    IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
    (I can test this).
    What I most need to know is If this suggestion is safe, or if it has side effects?
    Thank you

    Hi Eileen,
    In Least case to enable the selection for the fields with the below program:
    Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
    SE38: Create a program for ref below code.
    REPORT ZNP_SELE_DS.
    tables: ROOSFIELD.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND   OBJVERS = 'A' AND FIELD = 'BELNR'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
    Thanks & Regards,
    Srinu.Rapolu

  • Creation Of Custom Transaction For RF enabled devices "mobile data entry"

    Hello Everyone,
    i need some information, or some material or some example's for creating custom transactions that will invoke the standard good issue transaction of sap from the handled device using the RF , so can anybody give some reference which will help me in creating custom transaction for a RF enabled handled device, which will invoke the standard sap goods issue transaction( mb1a) ,, there are some LM-transaction which do goods issue from the RF enabled handled device, but in my case i want to do goods issue using reservation as my input, so can anybody guide me or send some reference material matching to my problem, i would really appreciate it..
    thanks in advance...
    sapient2006

    Hi Hussaini,
    Here are the steps.
    1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
    2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
    Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
    Regards,
    Anand.

  • Customer Tax Classification : Missing entry screen in customer master

    Hi All,
    Anyone know if any customizing is required to activate the Customer Tax Classiification entry screen in the Customer Master of Sales Area (BillingT Tab)? I could not enter the customer tax classification as the entry screen doesn't appear in the customer master.

    Hi,
    You have to maintain few settings for this
    In OVK1 Enter the TAX CATEGORY for the Country
    In the OVK3 transaaction code enter the TAX CLASSIFICATION for the Tax category defined in OVK1
    after this assignment try to create the customer master , in the Billing tab the tax classification will appear.
    regards,
    santosh

Maybe you are looking for