Custom field not getting populated in the "Show Results where" drop down

Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

Similar Messages

  • Functional Area field not getting populated in the AUFK table

    Hi Friends,
    The table AUFK is the table for Internal Order master data.
    The issue which we are facing is:
    In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
    But the cost centers which are maintained in the order master has the functional area field populated with value.
    In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
    Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
    Thanks a lot in advance for your help.
    Regards,
    Shilpi

    Hi,
    maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
    I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
    If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
    Best regards, Christian

  • Values not getting populated in the o/p

    Hi,
    I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
    Regards,
    Hema

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • Values not getting populated in the SMOPCCAPRO

    Hi,
    We had added a new field to CPGProduct in component CPGOE_ABLOCKS. But the extension field was not included to the BOL structure automatically.
    So ,we had used the SAP note 1472567 to add the include structure INCL_EEW_MKTPL_PRD to structure CRMS_MKTPL_CPG_PROD which inturn would rectify our BOL  structure CRMS_MKTPL_IB_CPG_PROD.
    The field which we had added using AET was added in tables CRMD_MKTPL_PROD and SMOPCCAPRO. But we are facing an issue that the values are not getting populated in the SMOPCCAPRO table on save.The values are gettign populated in the CRM table.
    Do we need to implement any other SAP note on the midleware side too to rectify this issue as i infer some interface structure would be missing this field which results in the truncation of value from being passed to the CDB table . Any pointers in this regard would be helpful.
    Thanks
    Swapna.

    Hi Swapna,
    as the CDB table has been extended with the new field I assume that you have enabled the mobile flag for the enhancement.
    Then it will also extend the mobile BDOC and the data should be transfered automatically.
    If this does not happen there's an error somewhere. Either the middleware is not set up properly or the mapping routine does not transfer the fields properly.
    I recommend to raise an OSS message for this.
    Best regards
    Matthias

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • SAP Fields not getting displayed on the BDT screen

    Hello Gurus,
    I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
    1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
    2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
    3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
    4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
    5. Attach the section to the Subclaim Overview Screen.
    6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
    Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
    Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
    Reagrds,
    Shiva

    Hi Shiva,
    did you create your own Z BDT application? Is it set to be active?
    I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
    Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
    Regards,
    Frank
    Message was edited by: Frank Vieregge

  • Search Help for Vendor Feild not getting populated in the Screen Element

    Hi Everyone,
    In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
    The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
    Now that the search help exists and I can drill down the values too but when i select/choose any value,  that value is not getting populated in Screen feild.
    is there any validation I need to do for this.
    Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
    Regards,
    Raj

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • Custom fields not getting updated in Mass Maintenance-MM17

    Hi,
    I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17.  I have checked the notes 44410, 576160, 414020 and 116311.  I have done the following changes as per the sap notes.
    1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that  
        segment.
    2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
    3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
    4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
    5. Added the custom field in the table MASSFLDLST.
    6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the 
        sap notes.
    The custom field is not getting updated through mass maintenance.  Please let me know if i have missed anything?
    Thanks,
    Geeta

    I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

  • Workday field not getting populated in BAPI_ENTRYSHEET_CREATE

    Hi MM gurus,
    I am trying to upload service entry sheets using bapi's , i checked the note 420334 and its working fine now.But, i want to populate  the workday field also in the service entry sheets, but this field is not getting populated even if i enter this field in the test data directory.
    Can anyone give me the reason for this?

    Hi
    Are you trying to populate the workdays field using BAPI in SE37 transaction??
    If you are executing the BAPI in SE37 then the data would not get updated in database.
    You need to run the BAPI FM & another BAPI "BAPI_TRANSACTION_COMMIT" in sequence in SE37 to post the data in database.
    I hope this helps.
    Thanx
    Prasad

  • XREF3 field not getting populated in BSEG table while posting MIRO

    Hi,
         I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
    any hint on this?
    Thanks & Regards,
    Soniya S.

    Hi,
    1.- According to SAP Note 904652 - MIRO: Different from FB60
    https://service.sap.com/sap/support/notes/904652
    MIRO is an independent Materials Management (MM) transaction that does not
    claim to be the same as the accounting transactions (such as FB60 or FB01).
    MIRO was developed to allow users to process vendor invoices within the
    context of the MM procurement processes as simply as possible.
    For this reason, among other differences, the field selection was limited
    to the absolutely necessary. For example, the following fields from the
    accounting document are not available in Transaction MIRO (this list is not
    complete):
    Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
    2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
    https://service.sap.com/sap/support/notes/1156325
    Have a look at badi MRM_ITEM_CUSTFIELDS.
    This badi will create a new tab at item level in order to display the new fields.
    I haven´t used this badi so i cannot talk from experience here.
    Think twice before deciding.
    Best regards.

  • Fom field not getting populated

    Hi,
    I have a field in the form role(multi select field). The value of another field in the form 'abc' is depedent on role selection. I have a rule with a switch and case statements for this. In the rule i am using
    <Rule>
    <switch>
    <ref>role</ref>
    <case>
    </case>
    </switch>
    </Rue>
    I tested the rule and it's working good.
    Now i am calling the rule in the field 'abc':
    <Field name='abc>
    <block trace'true'>
    <Expansion>
    <rule name='xxx'/>
    </Expansion>
    </block>
    </Field>
    The prolem here is that, even after i select the role, this field is not getting populated. It is empty.
    Not sure what i am missing. Please help.
    Thanks,

    step1) when you are getting value in the field on which "abc" is dependent , how are you getting that value?you are getting this value in derivation or expansion???
    step2: write the code logic for field "abc" in Derivation instaed of expansion. That should help.
    Please let me know if you are still facing the problem.
    Warm Regards,
    G

  • Users details not getting populated in the portal tables..

    Hi,
    We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
    Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

    You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
    Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

  • Fields Not getting Populated in Queries on Multi Provider

    Hi All,
    Product class,Product form and Packet size from Zqn6x03 (ods) are not getting populated in Queries(Multiprovider). Our`s is Heterogenous Multi Provider
    Points will be awarded.
    Thanks in Advance....

    Hi xys redd,
    After checking all the options it is very much important to run a report "RSR_GEN_DIRECT_ALL_QUERIES" IN SE38.
    This is the report used to generate all the changes to reflect in BEx
    It will aolve your problem if am not wrong.
    Don't forget to assign points.
    Venkat

  • Drop down vales not getting populated all the records

    Hi,
    I have the scenario. Drop down has the values. But it is getting populated for only one record. Second record drop down is there, but values are not there.It is blank from second record.
    Thanks
    GJ

    Hi ,
    Sorry for the confusion.
    I am working on xml schema offline scenario. I have 10 line items. It has one drop down list. I have populated the value in drop down. But in the first item drop down list, the first value is appearing as deafult one. From the second line item onwards, it is not appearing as default value. When you dropped down on the list, I can see all the values. I want all the drop down list, the first value should be appear as default value.
    Thanks
    GJ

  • Quantity fields not getting displayed in the second total row

    Hi,
    As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
    The second total row will have different values based on a formula.
    Please help me out in resolving the issue.
    Thanks,
    Abhishek

    You can provide first row as the SUBTOTAL and next row as the TOTAL.
    Get one extra column on which you can do the SUBTOTAL.
    Regards,
    Naimesh Patel

Maybe you are looking for