Custom infotype will also come in PNP Ldb

Hi Friends-
If we create a custom infotype which is starting from 9  eg  9001 , then  if we use PNP LDB   would this Ldb  provide me data for thsi custom infotype also apart from all PA standard infotype ?
Regards
Meeta

Hello Meeta,
It will not be a part of PA Info types.
Yes, you will be able to get values of the custom info type in the GET PERNR and END-OF-SELECTION loop as you get values for other standard info types. For this you need to declare the custom info type same as you declare info types for which you want data in your program.
Hope it helps.
Thanks,
Jayant

Similar Messages

  • Control the transfer of custom infotype  in PBA7

    Team,
    I am facing a issue in Recruitment module. the issue goes as below:
    We have a Custom Infotype 9024 (Test Score) which is maintained in PB30 after applicant actions (PB40)are completed. Which means we have not included this (9024)infotype in the Infogroup for applicant hiring. We maintain this IT manually in Tcode PB30.
    How ever when we try to transfer the applicant data to the Master data through std tcode PBA7 the custom IT9024 will also get transfered. Now we do not want to transfer this information (IT9024) to PA.
    How do I control this from transfering in PBA7?
    Note: Right now we do not save during transfer so it does not get transfered. Is there a ways to stop that screen from comming in PBA7 only?
    Kindly suggest any possible solutions.
    Thanks & Regards,
    Sunita

    Hi,
    Thanks for the reply.
      I understand the solution which u suggest is as follows :
    We need to go to screen PBA7 --> Go to the System > Status>Program.
    We have the screen number 1000.
    When we click on the program we have to find the PB0 and implement the changes suggested by you.
    How ever we do not find the Screen 2000 and the infotype 9024 in the program.
    Are we going in the right direction suggested by u?
    Thanks & Regards,
    Sunita

  • How to add custom infotype in ALE for HRMD_A  message type

    Hi  Friends-
    Pls help me for our req  we are using HRMD_A  Message Type for  HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type   how i can do that pls let me know ?
    <<removed_by_moderator>>
    Regards
    Meeta &  Glory
    Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

    Hi
    Thanks for your support,
    Pls let me know which steps i should go ?  my secanrio is  inbound side only,
    step 1 )   Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
    step 2) do i need to write some code in BADI also to update information for my custom infotype also  if yes then where and which BADI pls let me know  ? because already am working on one badi HRALE00INBOUND_IDOC for  few validation for incoming data.
    step 3 )  add  this new custom infotype in my standard ALE  filters.
    Pls let me know if am mistaking some where or if  i have to do some thing else ?
    Regards
    Meeta & Glory

  • Sap hr - deleting custom infotype

    Hi,
    Is it possible to delete custom infotype ?
    If I delete a custom infotype, will I be able to use the same code to create a different custom infotype.
    Rgds,
    Santosh

    Hi Remi,
    Thanks for your reply.
    Sorry, I have taken long time to reply.
    I will provide the details :
    I have created custom infotype having two fields.   The data is selected from the master tables.  We have created few records for the period 01.04.2012 to 31.03.2013.  Now, the functional team wants to add new data to the Master Tables and remove some of the existing fields from the Master.  I can add new fields to the master and it will get added as f4 field help.  However, if I remove the data from the Masters,  there will not be entries in master for the said records. 
    I am referring to PRD System.
    Hope I have clarified the things.
    Rgds,
    Santosh

  • Add the custom infotype in Fast entry screen

    Dear All,
                       I add the one new created the custom infotype in the fast entry screen but when am going to create the entry threw pa70 transaction in that case my table control which is been in that infotype is not in editable mode means it's only display mode ..
    Kindly help me to fix this issueees.
    thanks
    Regards
    Sandeep Dabral

    Hi Sandeep,
    Can you share the steps to create fast entry screen to custom infotype? Also is it possible to create custom TCODE to access this instead of PA70?

  • How can we create subtypes for om custom infotypes

    hi,
        I want the detailed procedure how to create Subtypes for Organzational management custom infotypes.
        Pls send me the detailed path how to create Subtypes for Org management.
    thanks & regards,
       Sekhar.

    Access transaction SM30/31 for table maintenance. Enter view name V_778U.
    Select maintain and enter the subtype for the custom infotype.
    Also remember to enter the time constraint for the subtypes mainatined in table T777Z.
    SPRO Path
    Personnel Management --> org management --> basic settings --> data model enhancement --> infotype maintenance --> maintain subtypes.
    Regards
    Ravikumar

  • Does the Macbook pro non retina also come with haswell processors.. After 22oct 2013 event??, Does the Macbook pro non retina also come with haswell processors.. After 22oct 2013 event??

    I am planning to change my Macbook pro and due to office network structure i need a macbook with ethernet port. It seems that the only option i have is the 13 inch macbook pro non retina.. I just wanted to confirm that will the basic non retina model of macbook pro will also come with HASWELL processors or not..? (After the 22 oct 2013 apple event)

    13-in remains unchanged since early 2013 update.  Source: http://www.engadget.com/2013/10/22/apple-unveils-haswell-based-macbook-pros-with -retina-display/

  • Custom Infotypes: Deleted in Development system

    Hi Gurus,
    I have commited a fatal mistake by deleting the existing infotype by clicking the Generate Objects button in Development System.And the Existing custom infotypes are also moved to the production system.We had tried Re-importing the overwritten objects.We got the PS Structure for that infotype.But the module pool programs are not transported back to the development system. Please provide me the solution to get the objects back to the development system.It is also not allowing to create the Module pool programs manually....Please help me out.

    The only way I see is either restore from a backup of your dev system.
    Or trace all the transports related to your custom infotypes and re apply them manually by downloading them from production or QA and importing it into dev enviornment.
    Ask your basis team they would know how to do this.
    By they way take it easy, it happens but nothing is to disastorus unless applied into production.
    Make sure that your transports related to regenerated objects are not released to any systems,
    Thanks.
    FY
    Reward if this helps.

  • Can SCAN VIPs also come back, when the node is Up after failover?

    Hi,
    Consider a two node cluster, as two SCAN vips are running on Node1 and one on Node2.
    As,Node1 is down so the resources and the Node vip failovers to other node.
    When the Node1 is back again, what about the SCAN VIPS they will also come back and work for Node1.
    Thank you
    -Satya

    Hello,
    First of all answer of your question is YES.
    Now Oracle suggest that we should use 3 SCAN VIPs (SCAN LISTENERs).
    See this demo for your question:
    I have 3 node RAC setup : HOST01 & HOST02
    *# crsctl stat res -t*
    As you can see currently SCAN VIPs are running on all the machines, now i am going to stop crs from HOST02 and see the status of SCAN VIPs:
    From host02
    # crsctl stop crs
    FROM HOST01,
    *# crsctl stat res -t*
    [root@host01 ~]# crsctl stat res -t
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    *1 ONLINE ONLINE host01*
    ora.LISTENER_SCAN2.lsnr
    *1 ONLINE ONLINE host01*
    ora.LISTENER_SCAN3.lsnr
    *1 ONLINE ONLINE host01*
    ora.gns
    1 ONLINE ONLINE host01
    ora.gns.vip
    1 ONLINE ONLINE host01
    ora.host01.vip
    1 ONLINE ONLINE host01
    ora.host02.vip
    1 ONLINE INTERMEDIATE host01 FAILED OVER
    ora.host03.vip
    1 ONLINE INTERMEDIATE host01 FAILED OVER
    ora.oc4j
    1 OFFLINE OFFLINE
    ora.orcl.amdbs.svc
    1 ONLINE ONLINE host01
    2 ONLINE OFFLINE
    ora.orcl.db
    1 ONLINE ONLINE host01
    2 ONLINE OFFLINE
    3 ONLINE OFFLINE
    ora.scan1.vip
    *1 ONLINE ONLINE host01*
    ora.scan2.vip
    *1 ONLINE ONLINE host01*
    ora.scan3.vip
    *1 ONLINE ONLINE host01*
    [root@host01 ~]#
    This time you can see all the SCAN VIPs are running on HOST01.
    Again after starting crs on both the machines : HOST02
    see the status again :
    *# crsctl stat res -t*
    [root@host01 ~]# crsctl stat res -t
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    *1 ONLINE ONLINE host02*
    ora.LISTENER_SCAN2.lsnr
    *1 ONLINE ONLINE host01*
    ora.LISTENER_SCAN3.lsnr
    *1 ONLINE ONLINE host01*
    ora.gns
    1 ONLINE ONLINE host01
    ora.gns.vip
    1 ONLINE ONLINE host01
    ora.host01.vip
    1 ONLINE ONLINE host01
    ora.host02.vip
    1 ONLINE ONLINE host02
    ora.host03.vip
    1 ONLINE INTERMEDIATE host01 FAILED OVER
    ora.oc4j
    1 OFFLINE OFFLINE
    ora.orcl.amdbs.svc
    1 ONLINE ONLINE host01
    2 ONLINE OFFLINE
    ora.orcl.db
    1 ONLINE ONLINE host01
    2 ONLINE OFFLINE
    3 ONLINE OFFLINE
    ora.scan1.vip
    *1 ONLINE ONLINE host02*
    ora.scan2.vip
    *1 ONLINE ONLINE host01*
    ora.scan3.vip
    *1 ONLINE ONLINE host01*
    *[root@host01 ~]#*
    After starting crs on HOST02 again SCAN VIPs move back to HOST02 automatically.
    Thanks,
    Ashish Shukla
    Edited by: Ashish Shukla on May 15, 2013 7:19 PM

  • HR LDB PNP and customer infotypes in 640

    Hello,
    I encountered the following problem during an upgrade from 4.6C to SAP ERP Central Component 5.0. When using logical database PNP and customer infotypes the syntax check produces the following syntax error:
    - INCLUDE report "%_HR9731" not found
    I have added an example program below. Prerequisite for this program is that the cutomer infotype 9731 exists in the system.
    Has anyone experienced this problem before? And if so, is there a solution? I can program some workarounds, but I prefer a solution, which does not involve changing my code.
    Regards,
    Marcel
    REPORT ZTESTINFOTYPES.
    tables: pernr.
    infotypes: 0000,
    0001,
    0002,
    9731 mode n.
    start-of-selection.
    get pernr.
    write / p0002-pernr.
    end-of-selection.

    Hi all,
    "You will have to run report RPUMS40CCI (XPRA for generation of
    infotype include) for existing customer-defined infotypes.
    If you have not run this report then please do so.
    The report RPU40CCI creates the infotype include %_HRnnnn (nnnn =
    infotype number) and the additional data structure Pnnnn_AF (nnnn =
    infotype number) for the given infotype, provided that the correspondin parameter ("generate infotype include" or "generate additional data
    structure") are set on the selection screen. If the parameter "maintain only T77ID" is set, no infotype include or additional data structure is maintained, only those entered in table T77ID."
    Best Regards
    Silvio Galery

  • Logical database PNP not retrieving data for custom infotypes.

    Hi all,
    I am using logical database PNP in a program. I have declared infotypes as follows:
    INFOTYPES: 0001, 0002, 0041, 9801, 9840.
    The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
    regards,
    Hamza

    solved

  • PNP LDB custom selections

    Hi All,
    I have created a report using PNP LDB and assigned a master data report category. I have also created additional selections in my report, besides the selections offered by the LDB/report category.  The issue is, the additional selections that I have defined appear at the bottom of the screen below the standard selections.  I need my custom selections to be shown at the top of the screen and the standard selections below that.
    How do I do that ?! I appreciate any pointers.
    Thanks,
    Kiran.

    HI Kiran,
    use reporting catagiries .
    change selection as per  your requirment
    rex

  • Change layout of Adhoc query output list for Custom infotype

    Hi All,
    The fields in the Infoset query output on a custom infotype are aligned with the fields u2018payment typeu2019 and u2018amountu2019 appearing repeatedly(in columns) as declared in the Infotype and the output will be a long horizontal list.
    Instead, the requirement is that the output list should show vertically so that If I choose u2018Payment Typeu2019 and u2018Amountu2019 as output fields, it will show a long vertical list as in the case of a standard infotype (IT0008).
    Also, this way enables user to use Payment Type as a selection criteria so as to just pulling the needed payment type. When we use IT0008 in the infoset it works fine but in custom IT it does not work.
    Any pointers/suggestions on how we can achieve this would be helpful.

    Hi yu liang,
                     You can find vendor list having Vendor No. & without showing total liability for every vendor.
    after executing the report,
    1.You need to select "change layout (ctrl+F8)",
    a small window comes, it has two part -> column content & hidden fields.
    then u select "Vendor" from hidden field & move it to column content.
    2. at column content there is a column named "Total". u need to remove check for your column name "amount".
    now select "copy" button or enter. u will find the req. report.
    u can save it also by ur name.
    hope its helpful to u.......
    plz, reward points as a way of thanks if helpful...

  • Adding Custom Infotype to a Infoset

    Hi,
    I have created a Custom Infotype for OM with some custom fields.These fields need to be made available to the Infoset for Adhoc Query.
    Any idea how this infotype can be added to the infoset?
    or made available for Queries.
    Thanks,
    Vijay

    Here are the steps that I followed:
    Enter the transaction code PPCI
    Enter a four digit infotype number (9nnn) and an infotype name.
    Select Field Infotype
    Choose Infotype Create.
    Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
    Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
    Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
    Press the Maintain button.
    From the list of Infotypes locate the custom infotype created and select the entry for that.
    Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
    The screen for Change View Time Constraint would appear.
    In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
    Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
    Create a new entry here for your infotype and save it.
    Come back to the Transaction PPCI and you are all set.
    This is all I did and it worked.
    Thanks,
    Vijay

  • Custom Infotype In HR

    Hi All,
    plz send me detailed process in creating new custom infotype.
    Regards,
    Ashwin

    Hi,
    Check these,
    Tcode->PM01 is used to create a new custom infotype.
    If you want to create a letter from SAP after a transfer action, you need not create any custom infotype for this. Develop a Z-report & use LDB to fetch the data before & after the transfer action from IT0001. The data before transfer action will always be there in infotype 0001.
    http://www.sap-img.com/human/how-to-create-a-hr-infotype.htm
    Rewards points if helpful.
    Regards,
    Srinivas Ch

Maybe you are looking for

  • Household of iPhones -- How to Sync multiple iPhones with Multiple Computer

    We just purchased two iPhones, one for me and one for my wife. Awesome so far, activation was a breeze, no problem getting on our wifi network. Now we're choosing what to sync. We have two computers -- one macpro for me, a powerbook g4 for my wife. W

  • Install Oracle 8.1.7 (64 bit) on AIX 5L

    Hi all, I'm installing Oracle 8.1.7 (64 bit) on IBM AIX 5L and everything goes fine while copying files, but there are problems in the relinking phase. I've installed the 32 bit version and it works, so the problem seems to be with the 64 bit version

  • Business Objects and Data Services on VMWare

    My company has a requirement to deploy Business Objects 4.0 as well as Data Services. We are going to be deploying them on Windows Server 2008 R2, hosted on a VMWare cluster.  I have reviewed the PAM, but my question is: Will these run using SQL Serv

  • Slicing image on different angle and exporting to Dreamweaver ?

    Hi! I think I searched entire web and didn't find the answer.. Is it possible to slice image on different angle not just rectangle ? On images below you can see the section that I'm trying to make a slice and slowly I'm loosing hope because I think I

  • Re: Foreign Transaction Credit Card Fees

    My Skype account + debit card are both denominated in GBP. When I was authorising the payment, it said on screen "Pay GBP 20", not any other currency or amount. What Skype actually debited was EUR 25.27 (says on my bank statement: "SKYPE COMMUNICATIO