Custom Theme not reflecting on NWBC HTML

Dear All,
I copied the corbu theme and then modified the same to create the custom theme. Now when I use the custom theme the applications do come up in the custom theme but the shell loses even the corbu theme and falls back to the basic theme. Can you give me any pointers to solve this issue.
Pls see the below screen shot.
thanks,
raghavendra

Thanks Samuli for taking at look at the problem. I put in the config table or the URL parameter, it has the same effect. I am using NWBC HTML. The last patch applied was patch 38 based on this note
1353538 - NWBC -Patch Collection- SERVER SIDE (ABAP)+NWBC for HTML

Similar Messages

Custom theme not reflected for Panel control in HRTMC_SHORT_PROFILE application.

Hi All
After the ECC and portal upgrade , I have been facing issues with most of the application being visible in standard SAP theme.
Some changes were resolved by changing the parameter parpghtbgcolor etc.
For the Short Profile panel under HRTMC_SHORT_PROFILE application , the colour of the Panel bar is coming in blue instead of custom theme.
Can you please suggest which parameter value should be changed under
System Administration -> Support -> Themes -> Update Customer Unified Rendering Theme Parameters
Please reply at the earliest.
Regards
Shaily

Quote from: Svet on 08-October-11, 02:01:08
Remove current Virtu Control Panel/Driver & software with "Your Uninstaller!":
http://www.ursoftware.com/download.php
[which removes any registry entries and files that can be left assotiated with corespond sofware]
when its done, reboot machine and then install the Virtu from msi web again:
http://www.msi.com/service/download/driver-17057.html
Hi Svet,
Thanks for your reply.
I've done as you requested (although I will point out that Your Uninstaller contains a Toolbar which is flagged as Spyware...) and uninstalled Virtu with Your Uninstaller:
And then I re-installed the version of Virtu Control Centre from your link (it's the same as I downloaded earlier but I re-downloaded it to be sure...), and exactly the same happens:
HU16E, I think your correct. Reading the other issues with the missing Certificate/License on the BIOS has plagued a few other MSI motherboards but has been fixed with BIOS updates - I've submitted a support request to MSI but haven't heard anything back yet. I can't beleive they can/would miss something like this out, it's an integral feature of the Z68 chipset!
I might see if the retailer I bought it from will accept it back for a refund, I'll either get an ASUS or the GD80, unless someone can suggest anything else or MSI come up with a BIOS update sharpish!

Custom Theme not affects UWL

Hi,
We've checged the Custom Theme to reflect company branding, but UWL Iview's are only getting Tabstrip changes. We're unable to modify table within UWL although we changed all table related items via theme editor.
does anyone have any idea?

Hi
Are you in EP 7.0?
In the UWL iView , find the value of the property "Launch Wd UI"
If you make it no, the Portal theme will get affected for UWL also. But the look and feel of the iView will be same as of EP 6.0. I don't think it as a good solution
You check this following link.
[How to define theme used by a WD Application|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ea0d790-0201-0010-80b8-b680496a3838]
I haven't tried this. Bt I think that this will be useful.
Best Regards
Aparnna

ITS custom Theme not working after upgrade EHP7

Dear Experts,
We previously created changed the standard theme SL and changed the html templates GENERATOR and GUI_CUA and we also added mime objects for logos and header. It was working fine untill upgrade but after upgrade it is not bringing hte custom theme, instead it is bringing the standard theme.
My page was like below before upgrade:
Now the page looks like below after upgrade:
Below are the parameters maintained in SICF for service:
~TRANSACTION    zva01i
~GENERATEDYNPRO    1
~WEBGUI    1
~COOKIES    0
~NOHEADEROKCODE    1
~THEME    sl
~WEBGUI_THEME    sl
~NO_ITS_HEADER    1
~WEBGUI_SIMPLE_TOOLBAR    34
~WDSKIPSPLASHSCREEN    1
I am new to ITS and I am unsure on what to do. could someone help me resolve this issue.
Thanks,
Naveen

After the upgrade of our systems, the ITS server was not recognizing a few of the things like styling and the linking. So we just published the following core services again:
ITSMOBILE
SYSTEM
ITSGENMOBILE
ITSGENMOBILE4
ITSGENMOBILEXV
and everything fell into place.
If everything else looks fine and is in place, you may try the above.
Regards,
Utkarsha

Changes Not reflecting in NWBC client

Hi Gurus,
We have done some changes to add an Application in ESS Launchpad which is working fine when launched from NWBC for HTML
Link in NWBC for HTML :
When same link is accessed from NWBC Client changes are not reflected. we are using NWBC 4.0 PL9 and we have cleared all the cahce in Extended support .
Link in NWBC Client:
Any input is welcome, I have searched all the usual places however havn't been able to find anything helpful on this particular issue.
Best Regards,
Ashish Sachdeva

Hi Samuli,
Thanks for your inputs. We would check on the pointers mentioned by you.
I am working with Ashish on the same issue. The link Ashish is referring here is the Open enrollment link under benefits.
The link appears automatically if we maintain adjustment reason in 0378.
It is appearing in NWBC for HTML but not for desktop client when we login with the same userid.
We are experincing this almost all are test users in the development and quality systems.
Thanks,
Sahiba
Message was edited by: Sahiba Gandhi- 8/21/2014
To check the cache thing , I just made a quick test. My test user for which Open enrollment link was not appearing was earlier mapped to some user say XYZ at 105/001.
I got a new userid created say ABC and mapped at 105/001 for the same test pernr and I am able to see the Open Enrollment link now.
I am quite sure now that it has to do with some Cache refresh at user level.
Any inputs are highly appreciated.
Thanks,
Sahiba

Uploaded custom, theme not showing in repository

I have copied a existed theme_4 from images/themes/theme_4 to them_200.
when i am trying to export the same from repository, that is not showing in the list..
I have followed the below steps to create new custom theme
1) in images/themes/theme_4 copied the theme_4 directory to theme_200 direcotory
2) changed the CSS files, as per our requirements.
3) should export the them_200, changed one (not showing in repository list) currently stuck
4) after exporting the theme_200.sql , need to replace t4 and etc.... with t200 etc
5) importing the changed one into repository.
currently i am stuck with step 3, can you please help me on this...

1) I copied from theme_4 to Theme_200.
2) I have followed the steps from the below link.
http://rianne.andama.nl/blog/index.php?option=com_content&view=article&id=101:custom-themes-oracle-apex&catid=20:oracle&Item
Now I am trying to export the theme_200, but theme_200 is not visible in the list of themes to export.

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

SAP Portal custom themes not appearing in 'Personalize' link

Hi.
I am trying to make customised themes available to my users through the 'Personalize' link in the masthead. I have successfully customised the Personalize function so it now includes only the ability to choose themes - all other forms of personalisation have been stripped out. I have also successfully created a customised theme.
My problem is that the custom theme I have created does not appear in the values list within Personalize -> Portal Theme. Only SAP standard themes are appearing in the list. I have managed to assign the theme to users through a display rule, so I know the theme works OK. I have tried exporting and re-importing the theme, this did not help.
Does anybody know how I can make my custom theme available through the Personalize -> Portal Theme list?
Thanks in advance for any help,
Simon.

Hi,
Only the themes present in the desktop in which the users fall will be available in the personalize link.
In detail
System admin->portal display->Desktop and display rule ->open your desktop (in which the user falls)
Add all your custom theme to the desktop.
By now the custom theme will be present in personalize->custom theme.
Regards
Karthiheyan M

Changes to custom VO not reflecting

Hello All,
I created a new VO which extends standard. I did a jpximport. First time it worked. But now when I make changes to the VO files, the changes, query and new attributes, are not reflecting on the OA page. The page is picking the old version. Saw the details through About Page. Apache was bounced a couple of times still no use.
Can anybody tell me if I'm missing out anything here ?
Thanks.

You can also use functional administrator responsibility.
--Shiv

WEBSITE NOT REFLECTING EDITS OF HTML FILE THAT WAYS SUCCESSFULLY "PUT" TO REMOTE SERVER

Help! I'm hoping there is a simple reason why I can't get my simple edits to reflect on the website.Here is what I have done/tried:
1. opened and added one simple line of text (with one link to a pdf) to one page of the pre-exisitng site.
2. checked both properties and code to make sure everything matched the preceding, similar line of text
3. connected successfully to remote site through dreamweaver
4. tried both "putting" and synchronizing the file (along with dependent files)
5. the first time I did this I got the message that "no syncronization info is available" from the remote site
6. clicked ok (after going back and unchecking "maintain synchronization information," and making sure there were no sync files in the _name folders)
7. it took a long time to upload all of the files from the local site. when it finished, the log stated that everything put successfully, but the website
doesn't look any different.
Our root folder is saved on our server. We just recently changed web host providers.
Also, for each webpage, there are two html files (one general and then one with a 1, 2 or 3 column descriptor). I edited and put both to the site, but is there
something I should know about these two files?
?? I just need to make some really simple edits and I don't understand why they are not showing up!!??
Any help would be deeply appreciated!!!
Thanks, Jessica

I followed your instructions and was able to see the dummy page in the browser. (no file not found error)
OK - that's good.
I only have one site defined (should I have two - one for local and one for remote?)
Well, one site definition has the ability to contain local and multiple remote site specifications. Under the basic Site category in the Site definition, you will see the path to the local root folder. Under the Servers category, you will see each server that has been defined - usually a Remote server (that would be your web hosting account) and a Testing server (if you are coding a site with server scripting). It's normally the case, with a simple, static HTML site, to have just Local and Remote details in your site definition.
I called our host (Go Daddy) to ask what the name of the root directory was and they instructed me to just leave that blank. so right now it just appears as \
Actually, it should be either blank or "/" (the regular slash).
If you are able to see the dummy file that you browsed to but still do not see changes made to other files, then it must be that the host is caching files on your site. You would have to ask them that question. Otherwise, you should see changes that have been uploaded immediately.

PS 2013 - Changing the formula in custom field not reflected in the report columns

Hi,
The company where I work have a Sharepoint environment / EPM 2013 with about seven hundred registered projects.
We have a customer demand where it is necessary to change the formula of one of the custom fields of the environment. This field is used in some management reports made in Reporting Services and accessed by the entire board. The report uses as a source
'MSP_EpmProject_UserView' view.
The change in formula was simple, but we found that the change will not be reflected in the reports when the user saves the project in Sharepoint or publish the schedule associated with the Project.
I believe this is the expected behavior of the EPM, but I wonder if there is some other way than through the PSI, to publish all environmental projects.
Best regards,
Armando Machado Gonçalves - Sharepoint / EPM 2013

Hello,
That is expected, it will not update until the project is open and republished. No automatic way to do this without automating project pro. Publishing all projects via the PSI wont cause the plan to recalculate, the plans will need to be opened.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Custom tab not reflecting in ME21N & ME22N

Hello,
I need to add an additional tab on the Header level of PO. I have implemented the BAdI ME_GUI_PO_CUST & ME_PROCESS_PO_CUST as specified in the sample example.
However, I'm unable to see the custom tab in ME21N & ME22N, whereas I can see the tab in ME23N. I have code in the method FIELDSELECTION_HEADER but it doesn't stop at breakpoints when I run ME21N & ME22N.
When I debug, I can see the breakpoints but the program never reaches them.
Thank you for any help on this and implementing these BAdIs in general. This is the first time I have worked with these BAdIs and it has proved to be very frustrating.
Kind regards,
Chris Mowl

Hi Chris,
Madhu is right. Check the point he suggests. For instance in IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER
DATA: l_persistent TYPE mmpur_bool,
        l_changeable TYPE mmpur_bool.
* if the item is already on the database,
* we disallow to change field badi_bsgru
l_persistent = im_header->is_persistent( ).
l_changeable = im_header->is_changeable( ).
* after coding
   IF CONDITION IS TRUE.
      IF l_changeable = 'X'.
        <fs>-fieldstatus = '.'. " READY FOR INPUT
      ELSE.
        <fs>-fieldstatus = '*'. " view
      ENDIF.
    ELSE.
      <fs>-fieldstatus = '-'.    "SUPRESS IT
    ENDIF.
Remember note, if all fields that you add are suppressed, then the dynpro will not be viewed.
I hope this helps you
Regards
Eduardo

Custom theme not applied

I've created a new Flex library project called Foo, which contains a css file default.css.
I want to apply the .swc as a theme to project Bar.
So I went to Properties -> Flex Theme -> Import Theme.. and imported Foo.swc.
A new theme called Foo showed up. I selected it and clicked OK to recompile Bar.
The css file was not applied ;(
What am I missing?

I've created a new Flex library project called Foo, which contains a css file default.css.
I want to apply the .swc as a theme to project Bar.
So I went to Properties -> Flex Theme -> Import Theme.. and imported Foo.swc.
A new theme called Foo showed up. I selected it and clicked OK to recompile Bar.
The css file was not applied ;(
What am I missing?

SRM's WDJ application is not taking custom theme

Hi All,
I'm working on the Portal branding. We have SRM BP deployed in our portal. I've created custom theme and desktop for the user.
I'm able to see the portal's different section as per custom theme. WDA/WDJ application's UI which is opening in the content area of portal is also showing as per theme.
When I'm trying to access the SRM BP portal content which is the collection WDA/WDJ application, inside portal content area showing as per theme. But one WDJ Iview related to MDM catlog data is opening in new window, in that WDJ UI is not taking custom theme color. UI is showing default theme "tradeshow".
I tried few SAP note(Note 1446099 - Web Dynpro application not displayed in customer theme) to synch the patch of portal and WDJ stylsheet but no luck.
Pl share your input to solve the issue.
Thanks!!!
Deepak

Hi Shishil,
Thanks for reply. Yes MDM component is in the same server.
I've tried below option to fix the issue but no luck:-
>Note 1446099 - Web Dynpro application not displayed in customer theme
>Note 1012065 - Technical Web Dynpro configuration in SAP NetWeaver 7.1
>Note 1000889 - CSS Style Sheet Integration of Web Dynpro and the Portal
>http://help.sap.com/saphelp_nw70/helpdata/en/1e/535d420447e054e10000000a155106/frameset.htm
When i tried to set the default Web Dynpro theme by modifying the sap.theme.default property, which is also located in the Propertysheet default folder with the below URL, no success:-
http://<host>:<port>//irj/portalapps/com.sap.portal.themes.lafservice /themes/portal/sap_chrome.
Deepak!!!

Custom theme changes are not reflecting after SP upgrade in Portal 7.3

Hi,
I am facing issue with a custom theme after the upgrade of Portal 7.3 from SP7 to SP12.
The landscape has the integration of Web Dynpro ABAP components in Portal. The custom font color set for the field name is not reflecting, instead it show the font color in blank.
Looking for your inputs.
Thanks, Ansar

Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty

Custom Theme not reflecting on NWBC HTML

Similar Messages

Maybe you are looking for