Customer consignment from vendor consignment stocks

Hello Experts,
I am working on the below scenario,
The stocks in vendor consignment are used for customer consignment.  I believe in standard we need to bring the vendor consignment stocks to company's unrestriced to do the post goods issue. Is there any work around for this solution so that the visibility of stocks still be on vendor consignment ? If so how would the posting when material document is created? Remember that, only after the customer consumes it, I will raise a PO and GR to bring to my own stock and then bill the customer.
Any thoughts?
Thanks,
Suhail Shaik

Hi,
The difference here is the stocks are already lying as vendor consignment stocks in our location and We are using it for customer consignment. Vendor doesnt supply to the customer directly.
Thanks,
Suhail Shaik

Similar Messages

  • About goods issue from vendor consignment stock

    Hi, I meet some issue needs your help!
    The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
    stock for this delivery base on the actual process?
    thanks
    Best Regards,
    Rory

    Hi
    In R3 it is not possible
    If say material X is 100 units lies in your premises the vendor  consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
    To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
    But the same scenario is possible in IS retail
    For this iS retail server is reqd
    In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
    You can search SAP library regarding the settings of the same
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
    Regards
    Raja

  • Sales from vendor consignement stock

    Is it possible to configure sales item catogory and schedule line to automatic withdraw stock from vendor consignement stock?
    I will assume that the special stock vendor consignement must be assigned to the item category, but there are no standard item categories in standard SAP with this special stock vendor consignement.
    Which movement type in the sales delivery should be used for this ?
    Please help with some input on how to configure this scenarioe.
    Best regards,
    Terje

    Hi Paul
    Check for movement type 601 , wheather item category K and special stock K are maintained or not. I suppose for movement type 601 item category K and special stock K are not supported and that is the reason you are facing the error
    Regards
    Srinath

  • Production order with components consumed from vendor consignment stock

    Hi expert,
    I have a production order with components and some of the components should be consumed from vendor consignment stock.
    When the order is created/released : is there  a possibility to have those components created with "special stock indicator" = 3 (consignement stock) by default?
    Thanks,
    P.

    Dear Pete,
    In my understanding it's not possible to populate this value as 3 - consignment stock in the component overview.This has to be
    done manually.
    Check in this way,by indicating a value in any of the material master field(for eg ABC indicator in MRP1 view) and if there's some
    value,then while saving the system populates for all those materials with this value as 3 by using some user exit or BADI.
    I'm not sure,it's only an idea,check and revert
    Regards
    Mangalraj.S

  • Selling directly from Vendor consignment

    Hi All
    <b>How to sell goods directly from vendor consignment ?</b>
    I have to build a selling consignment for a retail company.
    That company receive garment into vendor consignment stock. One customer can buy some shirts or trousers. In the month, company will issue alot of sale order. At the end month, that company total up consumption and sent to vendor. Vendor issue invoice and that company payment.
    My solution like this:
    1. Make PO consignment
    2. GR into vendor consignment, no FI document here
    3. <b>I want to selling directly from vendor consignment, but I can't</b>
    Somebody suggested that I have to transfer FG from vendor consignment to another stock before selling. That solution is not suitable because it take more steps and more time, you can take about <b>10 - 30s per sale order</b>. That company have hundreds of sale order per day, they don't accept that solution.
    Please help me selling directly from Vendor consignment
    Thanks & Best regards
    QuangDD

    Hi,
    You can use the movement type 231 K , it will directly transfer the goods from Vendor Consignment to the Sales order.
    I hope this helps.
    Regards,
    Murali

  • To create a customer invoice from vendor invoice

    Hi i have a requirement to create customer invoices from vendor invoice. i would like to know if it is feasible??
    if it is possible is there any bapi or function module to transfer data from the vendor invoices to the customer invoice.
    regards
    prasannakumar

    hi,
    refer to this below link
    http://help.sap.com/saphelp_47x200/helpdata/en/5f/e411bb044411d2bf5d0000e8a7386f/frameset.htm
    -Reward If helpful
    -chaitanya

  • To Create Customer invoice from vendor invoices

    Hi i have a requirement to create customer invoices from vendor invoice. i would like to know if it is feasible??
    regards
    prasannakumar

    hi friend
    u can do this in THIRD PARTY SCENARIO
    from vendor invoice u can create  u r customer invoice
    the item category for that is TAS
    THANKS
    REWARD POINTS

  • Withdraw stock from vendor blocked stock

    Hi
    There are stocks at vendor in Restricted status.
    I wanted to withdraw this stock for scrapping.  But movment type 555 do not have option to withdraw from vendor restricted stock.
    Can you please help me to remove the stock ? to unristricted/scrapping.
    Warm Regards
    Chetan.

    hi chetan,
    As per u narrated the stock is at vendor but in restricted stock. it means under vendor liabilities.. but now u want to scrapp it correct??
    as per my knolwedge the restricted stock should have liabilities at your side then only u can scrapp it. for that u have to move the vendor stock to unres. one and then receive it to scrap.
    please find your self and try.
    regards,
    ninad kshirsagar

  • Returns from vendor special stock O

    Hi, all.
    Does anyone know, how can I make a returns from vendor, special stock O?
    Thanks in advance.
    HAL

    Hi, Vivek.
    I can not do MB04, because I don´t know always de PO that originates the stock "O" and this movement creates a FI document, with isn´t correct, because the 541O (that puts stock in vendor)   does not create a FI document.
    Any other idea? I mus say that I have WM, so I need to create an transfer order to store that sock in my warehouse.
    HAL

  • Goods Issue in SD delivery (from vendor consignment stock)

    Hi, all.
    I'm trying to make a goods issue in SD delivery from a vendor consignment stock (movement 601K), but the system gives me an error message M7071 - I have to enter a vendor at item level, but where? And if I have a stock determination strategie, why the system needs the vendor, if I have stock K available for a vendor?
    Please advise.
    Thanks,
    HA

    Hi Helena Maria,
    I think you have made some mistake in the movement types in the consignment processes..
    just go through this and its easy to remember...
    <b>Please reward if this is useful for you..</b>
    1. Consignment fill up:
    Sales document type is KB
    Item category KBN
    schedule line category 1
    In this step, you are not invoicing the customer. document flow is sales order -
    delivery item category. It will not be relevant for billing and pricing because you are not charging money for these goods in this step.
    In schedule line category, you will set movement type 631 & set for availability check and TOR.
    2. Consignment Issue.
    Once the customer informed you that he used all the goods or partial goods then you will create consignment issue for used goods.
    Sales document: KE
    Item category: KEN
    schedule line category: C0 or C1
    Here you are invoicing the customer(because he used the goods). you are assigning the delivery document and billing document to the sales document.
    In item category, you are setting relevant for billing, pricing, special stock.
    In schedule line category, your setting is 633 movement type, relevant for availability check & TOR.
    3. Consignment Return:
    Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that you are creating this document.
    Sales document type: KR
    Item category: KRN
    You will assign delivery document and billing to sales document. you will create return order, return delivery, return billing.
    Your setting item category relevant for billing, returns, pricing, special stock.
    Your setting schedule line item category: 634 movement type, NO availability NO TOR.
    4. Consignment Pick up:
    Even if you create the consignment return the goods are not come to direct to your plant. For that you need to create consignment pick up. here the owner ship is not changing so you do not need to create billing.
    Assign return delivery to sales document type.
    Sales document: KA
    Item category: KAN

  • Goods Issue from Vendor Consignment

    Hi All,
    Does SAP have a functionality to facilitate us to issue the stock
    against a customer order from the Vendor consignment?
    In fact there should be no transfer posting of the consignment to own.
    Stock should straight away get picked from the consignment stock while
    doing the PGI for the outbound delivery.
    I would appreciate for your valuable comments.
    Regards,
    S Anand

    Hi,
    You can achieve this using stock determiantion.
    SPRO > MM > IM > Stock Determination > Define Strategies for SD
    Here you have to define group, rule and assign them, etc
    SPRO > MM > IM > Stock Determination > Assign Stock Determination Rules for CP > Delibery
    Assign the rule to the suitable item category
    SPRO > MM > IM > Stock Determination > Assign Stock Determination Rules for CP > IM
    Assign the rule to the suitable movement type
    MM02 > Plant data / storage 2
    Assign the suitable group for your material
    Regards,
    Csaba

  • Posting from vendor consignment into project not possible?

    Hello,
    I want to consume my materials out of vendor consignment stock for a project.
    Everytime I try to do a GI consgt f. project (mvmt 221 K) with MIGO, I receive following error message:
    "Account 41100100 requires an assignment to a CO object".
    Is it maybe not possible to consume out of vendor consignment into project?
    Regards,
    Sofia

    Hi,
    That's right, you must assign an WBS code to the consumption from consignment to project, beacause system need to book the consumption stock value under the WBS of project.
    Hope can help you!
    Good day and nice weekend
    Tao

  • Sales from vendor consignment

    Hi Gurus,
    I have a vendor consignment stock and I to get the stocks from the vendor consignment whenever I PGI.  I already set item cat to K and movement type in schedule line as 601.  When I do PGI, I get this error: Special Stock K not supported (check your entry).  Kindly advice.
    Regards,
    Paul

    Hi Paul
    Check for movement type 601 , wheather item category K and special stock K are maintained or not. I suppose for movement type 601 item category K and special stock K are not supported and that is the reason you are facing the error
    Regards
    Srinath

  • Free goods issue from vendor consignmemtn stock

    Hai Friends,
    I am doing here delivery thru vendor consignment stock. When i do the delivery  with 601 k  movement type. for that quantity vendor liability will be booked thru MRKO Transaction.  this process is going smoothly.  But i got problem in Free goods processing, to narrate in detail.
    in sales order for a material free goods (inclusive 8+2), in sales order itself the material will be divided into 2 line items with quantity 8 & 2
    When i do delivery  the vendor liability has to be booked for the quantity 8 and not for quantity 2.
    ur suggestion are welcome, early responses sure get reward points.
    Thanks

    Hi
    If you donot want the system to generate the second line item for the qhuantity 2 and the entire quantity 10 is to be displayed in one line item (8 priced and 2 free)......
    goto VBN2 - select the free goods condition record you have created and at the right side colum (not sure of the column name) select the value - FREE GOODS INCLUSIVE Without Line Item Generation.
    Now if you create a sales order, it will not create the second line item. Here it uses the condition type NRAB instead of R100 for determining the free goods.
    Thanks,
    Ravi

  • Create Customer Master from Vendor Master

    Is there a program that allows for batch creation of customers from vendors so that you don't have to rekey all the information?
    Thanks,
    CM

    No, You may have to create a custom program to do that.

Maybe you are looking for