Customer Exit Variable Period 000 is not valid in financial year variant Z2

Hi all,
I am trying to get the week number from a particular posting period. But I get this error when I execute the Query:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
SYST: Period 000 is not valid in financial year variant Z2
I checked in "FIRST_DAY_IN_PERIOD_GET" FM and it is not accpting period 000 for PERIV Z2. It works fine for all other periods.
Does anyone have an idea on this?
Thanks.

Simon,
So do you think that there is a problem in my Query restrictions? You ask me to restrict from 0 - 12, but this period is calculated based on the SY_DATUM in a cust. exit variable. And this period is being used to pull week number. So, do I need to change the code?
But I already have another query which is similar to this, only ready for input options are missing in the new one. The older one is working fine but the I have problem with this.
Any more ideas?
Thanks!!

Similar Messages

FGV003 - SYST: Period 000 is not valid in financial year variant K4

Hello,
I am getting the error below when trying to bring Period 000/2008 from our BCS cube into a basic cube. I've run the "Transfer Global Settings" for our R/3 system but am still getting this error. The BCS does have Period 000 Yr 2008 with FYV K4 and is showing in the master data for fiscal period. Any ideas??
SYST: Period 000 is not valid in financial year variant K4
Thanks,
Senthil

Dear colleagues:
The same problem is appearing to me. I am trying to run a job in background but the following error appears to me>
SYST: Period 000 is not valid in financial year variant 36
Do you know what I have to do to suprime the error?
The job I am trying to run is for creating an evaluation in order to run the report S ALR 87012167
Your Sincerely
Leonardo López
FI Consultant

Error in AS01 E003 SYST: Period 000 is not valid in financial year variant

Hello SAP Gurus,
I am encountering an error when creating an asset for a certain CC. Upon saving, error message 'E003 SYST: Period 000 is not valid in financial year variant' appears which prevents me creating the asset. My FY Variant K4 is already assigned in the correct company code. Not sure if this has something to do in period control, posting period or FY variant.
Can someone help me explain the root cause of my error?
Thanks in advance.
Carlo

Basically, period control will determine the depreciation start date. For 02, it is Pro rata upto mid-period at period start date.
This is means that for asset value date after mid month, depreciation will be start from next month.
As an example,
asset value date from 01.01.2012 to 15.01.2012 -> Depreciation start date is 01.01.2012
asset value date from 16.01.2012 to 31.01.2012 -> Depreciaiton start date is 01.02.2012
etc

Create asset-error"E003 SYST: Period 000 is not valid in financial year var

Error during Asset Creation: E003
AS01: Create asset was executed. During saving the asset got an error
E003 SYST: Period 000 is not valid in financial year variant
Following are the Depr keys assigned;
LINA is being used for Book Depreciation
MSTL Depreciation key is being used for ACRES, ALT MIN, ACE, E&P.
Asset Class is Buildings

Hello!
I had the same problem a few month ago. There is a SAP note about this. Run the Asset Year end technical proces in ARJW. Try again your asset creation.
Greetings,
Stéphane

SYST Period 012 is not valid in financial year variant R2 Msg no;FGV003

Hi SAP Gurus,
I have encountered with an error as following :
SYST: Period 012 is not valid in financial year variant R2
Message no. FGV003
Our client following calendar year till December 2009. They want to change to April to March , from April 2010 . So we need to define a shortened fiscal year for January to March 2010 for 3 months.
One important thing is Depreciation should be calculated only for 3 months ie., from January 2010 to March 2010 for year 2010. For year 2011 u2013 April 2010 to March 2011 be calculated.
I have done the following settings :
Current fiscal year variant = K4, i.e. the standard variant with 12 periods (calendar year)
-the current fiscal year must be closed on 31.12.2009
-this change have to be done in the next month, i.e. on 01.01.2010
-on 1.1..2010 starts the new fiscal year 2010
-the fiscal year 2010 ends on 31.03.2010 and have 3 posting periods
1) Create a new Fiscal Year Variant for the shortened fiscal year u2013 e.g. "R2" (OB29).
2) R2 to be made Year Dependent. Current Period Configuration
Month Days Period Year Shift
1 31 1 0
2 28 2 0
3 31 3 0
4 30 4 0
5 31 5 0
6 30 6 0
7 31 7 0
8 31 8 0
9 30 9 0
10 31 1 +1
11 30 2 +1
12 31 3 +1
3) Company Code assignment (OB37): K4 to be replaced with R2 .
4) Controlling Area (OKKP): K4 to be replaced with R2.
5) Fiscal Year to be shortened for Depreciation Areas in Asset Accounting customization (OAYP).
6) Table T093C to be viewed to check whether the field XRUMPF (Shortened Fiscal Year) has been activated with u201CXu201D..(SE 11 Check Table) Done manually
Other Problem : 1. The system calculates deprecation for period 3 ( Full year deprecation) as seen from AW01n for one asset.
2. When I run AFAB for 2010 period 1 the error is displayed
SYST: Period 012 is not valid in financial year variant R2
Message no. FGV003
Please anybody help me in this issue .
Subbu

Have you maintained the Year Shift Properly in OB29
For e.g if Financial Year is from July to June, year shift will be as follows:
Month      Days        Period       Year Shift
1     31     7     0
2     29     8     0
3     31     9     0
4     30     10     0
5     31     11     0
6     30     12     0
7     31     1     +1
8     31     2     +1
9     30     3     +1
10     31     4     +1
11     30     5     +1
12     31     6     +1
Check also FI period and aseet periods are open through OB52 and AJAB

SYST: Period 012 is not valid in financial year variant V3 Message no. FGV0

Hi!
While I am going to create Asset it is giving me following error :
SYST: Period 012 is not valid in financial year variant V3
Message no. FGV003
I checked in OB29, I have maintained 12 period,
can you please tell me what will be the problem.
Rakesh

Have you maintained the Year Shift Properly in OB29
For e.g if Financial Year is from July to June, year shift will be as follows:
Month      Days        Period       Year Shift
1     31     7     0
2     29     8     0
3     31     9     0
4     30     10     0
5     31     11     0
6     30     12     0
7     31     1     +1
8     31     2     +1
9     30     3     +1
10     31     4     +1
11     30     5     +1
12     31     6     +1
Check also FI period and aseet periods are open through OB52 and AJAB

"SYST: Period 012 is not valid in financial year variant Z4"

Hi
Iam getting this error "SYST: Period 012 is not valid in financial year variant Z4"
in Asset accounting when using the shortend fiscal yr with 9 periods in 2010.
Generated the period control OA84 for this variant Z4 but still getting the error.
Please advise.
Thanks in advance

Srini,
Our FY is Apr 2 march.
For 2010 , i put below and in shortend fiscal yr tab i put 9. still having this error.
1     31     10     -1
2     28     11     -1
3     31     12     -1
4     30     1     0
5     31     2     0
6     30     3     0
7     31     4     0
8     31     5     0
9     30     6     0
10     31     7     0
11     30     8     0
12     31     9     0
Please help
Thanks,
Heera

BEX Error: SYST: Period 053 is not valid in financial year variant M2

Hi All,
We have a merchandising report which bring the data for current year and previous year. While I execute the data for Fiscal Year/Period - 011.2011, I get the output. But when I execute the report for Fiscal Year/Period - 012.2011, I receive the below error.
SYST: Period 053 is not valid in financial year variant M2
We have variants M4 and M2.
M4 is month wise where are M2 is weekly.
In table T009B, we have a record for week 053 for year 2011 whereas we don't have a record for week 053 in year 2010. This is obvious as there are only 52 weeks in 2010 but 53 in 2011.
I'm not able to track the exact reason for this error.

Hi All,
Thanks for the reply.
I have tried maintaining entry for week 053 against year 2010 in T009B but this didn't work. I checked the 'Check Table' button for any dependencies and I saw T009 table.
I maintained the entry as below in T009 table and it worked. Can someone explain how this work?
Earlier entry for which I received the error:
Fi.Year Variant    Year-dependent     Posting period    Special        Periods Description
M2                            X                      052                     00              Retail Calendar Weekly
Changed entry for which the error stopped appearing
Fi.Year Variant    Year-dependent     Posting period    Special        Periods Description
M2                            X                      053                     00              Retail Calendar Weekly
Please help me understand so that if I transport the entry to Production, I don't face any serious issues.
Regards,
Murthy

Period 012 is not valid in financial year variant V3

Hi all
i already posted this issue on ASSET ACCOUNTING two weaks ago ....but still waiting for your responce .............
Can any one pls help me out ..........its an urgent ...........
when i check dep. thro' t.code AW01N/AS02 i am getting an error like "SYST: Period 012 is not valid in financial year variant V3".....
i don't know why the system is throwing this type of error and where i have to do changes...........
i am in 4.6c and the dep has not been run for long time . i suppose the last time the dep may be in year 2003......
Can u guide how to rectify his error........ and bring all the assets upto date and run the dep in the SAP system.
Presently my clients are posting the manual JV's for every Quater.
Any help in this would be highly appreciated....
Revert
Regards
Praveen

Hi,
Posting periods are controlled by two ways.
one is technical point of view - OB52 (see here are you maintain account type wise or *)
second is FI-MM point of view go for OMSY. You can see what are current period open for your company code. You can use T.code MMPV- for close the posting periods and MMRV to open or allow the period for posting.
Hope this is fine, If yes assign points,
Regards,
Sankar

Error saying 'Posting period 000 is not defined for fiscal year variant K4'

Hi All,
   When I try to add a new entry in the transaction OB52, I get an error message saying 'Posting period 000 is not defined for fiscal year variant K4'. The entry that I add is,
Variant           : 0001
Account Type: +
From Period    : 1
Year               : 1995
To Period        : 12
Year               : 2010
From Period2 : 13
Year               : 2000
To period2      : 16
Year               : 2010
Please let me know what customising needs to be done to solve this issue.
Thanks a ton.
Best Regards,
Jeff

Hi,
Hava you checked in OB52 screen, by default 0001 posting period variant will be there for +, A, D, K, S account types.
If it is already existed in your OB52 screen, you won't create one more record with the same name. You have to edit the existing 0001 posting period with new values.
Thanks
Chandra

Custome Exit Variable Not prepopulating Parameter of CRE Report

Hi
I am using a customer exit varibale to pre populate a parameter in a Bex query I have created. When I run the bex query the customer exit variable populates the parameter just as it is supposed to. However when I use the bex query in Crystal Reports for enterprise the customer exit variable does not pre populate the parameter. Is there something I need to do to make sure that CRE recognises the customer exit variable or does CRE not recognises them? If it doesn't recognise them is it possible to create CRE level Customer Exit Variable?
Many Thanks in advance
Neil

Hi Alun
Thanks but I'm in BW so Stored procedures are not really an option on this one. I suppose my primary question is, is there a reason that Customer Exit Variable is not working as it is creating a lot of difficulties by not populating the parameters in the same way it does in the bex query I am using to develop my Crystal report.
Thanks
Neil

Text Variable replace with Customer Exit Variable

Dear Experts,
I created a text variable based on replacementh path (instead of customer exit). The reference characteristic is same that as my customer exit Variable and replace it by Key.
I want to replace it with already Existing Customer Exit Variable but it is not displaying in the List Box even though existing variable option is mandatory.
Can any one Suggest me the answer for this.
Regards
Supraja.K

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Customer exit variables

Hello,
I have created two customer exit variables, although I'm not an ABAP expert. Both are calculated based on two optional variables selected by the user.
When running my query I get the message "Warning Value '' is too long for variable ZPERSTRT". I suppose that really means the value is empty while a value was expected. The type of this variable is 0DATE.
I try checking the code to examine how the value can be empty, and that results in a few questions some of you probably can answer.
Unfortunately, for complex reasons I have to program the customer exit variables in the development system, while testing them in the test system where I don't have access to the ABAP editor.
QUESTION 1
When finding the values of the other variables, I must be prepared to find them without a value. How can I know if they have a value or not? I've tried with the following code, which I suspect is not working quite as expected:
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'ZCALWINT'.
        IF loc_var_range-low <> ''.
          l_week0 = loc_var_range-low.
          l_flag = 1.
        ENDIF.
      ENDLOOP.
I later use l_flag to check if a value was found or not.
QUESTION 2
How is type conversion done in a statement like
date = string + 1
If string has the value "20071031", will 1 be added as a string (resulting in "200710311" which is then somehow converted to a date), like a number (resulting in "20071032" which is then somehow converted to a date) or like a date (resulting in "20071101")?
QUESTION 3
More type conversion. Would it be ok to concatenate year, month and day into a date variable, or should I always concatenate into a string which can then be converted to a date afterwards?
QUESTION 4
If the variable I want to read has an interval and not only a single value, is the only way to see this by checking the -high value? If this one has a value it is an interval, if not it is a single value? Or can I be sure the -opt value will be 'BT' if it's an interval?
Thanks and regards,
Christoffer

Anyone?
I'll award 10 points to the best overall answer and 6 points to answers which are first or best on one of the four questions.
Regards,
Christoffer

Customer Exit variable of Query not working in View

Hi,
I have a customer exit variable in my query to calculate the last 6 month period on Calendar month. I have used 0CMONTH for the same and then using offset of 6 on its value range to get it.
Now, I have many views based on this query, which should ideally be having the same filter condition for the calendar month, but it is not happening. Although, it is working fine for the query! The views do not seem to be catching the selection correct.

Hi there,
As far as I Know, yes they exist. The only difference here, is that you build a query with a selection screen, and you execute the query with some selection parameters, and therefore all customer exit variables, offsets, etc, will be read and changed at the runtime execution of the query, and you can rearrange your query visualization drilling down free char., making filters, etc. and storing that visualization in a view.
If you save your view and execute it afterwards, you'll get the same selection parameters to input, the same offsets, etc, that you have with the query, but with a visualization stored by you.
So that should have been working.
Diogo.

Customer Exit variable and Filter routine in DTP does not works?

Hello Experts,
Does anyone know what might be the possible reason - A customer exit variable working fine on the OLAP side does not work in a DTP??
I have also tried to use the Filter routine, which does not give me the right results..I am trying to fetch a Fiscalyear period maintained in an infoObject as follows in my Filter routine..
ata: sel_period like /BIC/PZPARAM-/BIC/ZPARAMVAL.
DATA: zperiod type /BI0/OIFISCPER.
          SELECT SINGLE /BIC/ZPARAMVAL INTO sel_period
          FROM /BIC/PZPARAM
          WHERE /BIC/ZPARAM = 'ZPCA'
          AND objvers = 'A'.
          zperiod = sel_period.
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'FISCPER'.
          l_idx = sy-tabix.
          l_t_range-iobjnm = '0FISCPER'.
          l_t_range-fieldname = 'FISCPER'.
          l_t_range-sign = 'I'.
          l_t_range-option = 'EQ'.
          l_t_range-low = zperiod.
          if l_idx <> 0.
            modify l_t_range index l_idx.
          else.
            append l_t_range.
          endif.
          p_subrc = 0.
Please let me know if I am making any mistakes above..
Kind Regards,
Kadriks

Hi
1. CLEAR l_t_range-high. is missing in your code befor assigning values to l_t_range.
2. use simple append l_t_range after the l_t_range asisgnments. remove below code :
if l_idx 0.
modify l_t_range index l_idx.
else.
append l_t_range.
endif.
p_subrc = 0.
3. I dont think you need to assign infoobject.
4. Clear sel_period and zperiod is also missing
Hence your code should be :
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'FISCPER'.
CLEAR l_t_range-high.
l_idx = sy-tabix.
l_t_range-fieldname = 'FISCPER'.
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low = zperiod.
append l_t_range .

Customer Exit Variable Period 000 is not valid in financial year variant Z2

Similar Messages

Maybe you are looking for