Customer field not fill in FAGLFLEXT
I'd actived a customer field (PS_PSP_PNR) in the main ledger and I'd included this field in totals table (FAGLFLEXT). I tested this customization and it worked fine.
The problem happens when G/L account is a statistical cost element (type 90). In this situation, I fill the field (PS_PSP_PPNR) and save the document, when I'm going to check its value in the position of the document (BSEG) is filled ,but when I check the balance of this G/L account in the table FAGLFLEXT it's empty.
I appreciate your help in this problem.
Dear Anto,
In the table Enhancement, you select Additional fields and choose ZZPS_PSP_PNR.
Field name (total) Data element Check Table Short Text Field Name
ZZPS_PSP_PNR PS_PSP_PNR PRPS Work Breakdown Structure Element (WBS Element) PS_PSP_PNR
Similar Messages
-
Manual bank statement error: "Bank reference" field not filled
Hi,
I'm getting an error (see below) while entering details in the manual bank statement. I've checked the variant already, and the manual bank statement variant with "Bank Reference" field is already deactivated. How come FF67 still validates on this field?
Did I miss something?
Hope for your speedy reply. Thanks!
"Bank reference" field not filled
Message no. FV094
Diagnosis
An interpretation algorithm is given in transaction 003-. This algorithm interprets the value entered in the field "Bank reference" and automatically determines the items to be cleared.
The field "Bank reference" is not filled.
System Response
No interpretation will be carried out.
Procedure
Recheck your entries.Hi,
The Bank Statement Transaction you are using has an Int. Algorithm configured, which requires the Bank reference field.
In IMG in the transaction where you create and assign business transactions to posting rules, there is also a filed for Int Algorithm. The system uses the Int Alg. to determine the fields on which to match and clear documents. The transaction you are using may have an int algo. configured which uses the reference field for clearing.
Even if you remove the reference field from the Manual Bank Statement Variant, the system is still going to look for it because that is one fields defined for clearing in the int alg.
You can change the config settings for the transaction, but either removing the Int alg. or using a different one. The description of the Int Alg. on the drop down list, will give you an idea of what fields will be used for clearing.
IMG path...FA->Bank accounting> business transactions-> payment transactions>manual bank statement-> Create and Assign business transactions.
Hope this helps.
Thanks,
Uma -
Custom Field not showing in analytics?
We have a custom field on the account object called sales stage. It is a simple pick list (our organization does not use the opportunity object). The custom field is not available in analytics. Is there something on the field setup that needs to be flagged? All of our other fields seem to appear just fine. This is so bizzarre!!
Any help is greatly appreciated.Hm. Still no answers.
We have a similar problem concerning custom fields not available in Answers. It concerns a custom field for an additional tel no. in the user record type. I thought it might have something to do with the fact that it can only be utilized through the other data types, using "owned by user".
But as you have the same problem, maybe there is a solution... Any idea would be appreciated. -
PO Custom Field not getting filled from Shopping Cart
Hi Gurus,
I am new to SRM. The requirement I had was to add a new field to the SC. I read several posts and articles on this but couldn't find the solution to it. I managed to do this modifying the corresponding structures in SRM and making the necessary changes in R/3 so the new filed can be seen in ME21/22/23N.
I checked Andreas Milbredt document to achieve it as mentioned:
Document: How to transfer custom fields from SRM to Backend.
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27
After that, when I create a Shopping Cart, the value in the New field is not transferred to the Back end.
I coded the following BADIs and User Exits:
In SRM:
BBP_CUF_BADI_2 (MODIFY_SCREEN) ->To enable or disable the field depending on conditions. Works fine.
BBP_DOC_CHECK_BADI (BBP_DOC_CHECK) -> To do some checks. Works Fine
BBP_CREATE_BE_PO_NEW (FILL_PO_INTERFACE1) ->Here I fill structures BAPI_TE_MEPOITEM and BAPI_TE_MEPOITEMX. I added another u2018Xu2019 to indicate the new field to BAPI_TE_MEPOITEMX. But I think I am not doing it right. This structure BAPI_TE_MEPOITEM/X, does the order of the fields correspond to the order of the fields in any of these 3 structures (which I am using)?
INCL_EEW_PD_HISTORY_CSF
INCL_EEW_PD_ITEM_CSF
INCL_EEW_PD_ITEM_CSF_SC
I also checked the following link:
Map a custom SRM field to a standard field in R/3
In R/3 I populated the Exits Andreau2019s mentions on his article. Am I missing anything else?
Thanks & Regards,
Ernesto.Hi Ernesto,
You can find out how your BAPI structure is being populated (by generating the test data ) using FBGENDAT program and activating the BAPI_PO_CREATE1 (and you will need to set the parameter for the specified user id)... This will provide you ability to execute the BAPI offline and figure out what is happening...
Note 517767 - Generate test data for function modules
Things to look for, Is any of your custom fields quantity fields or integer?
Check out the following OSS note
Note 509898 - BAPI enhancement concept and Unicode
Also check out the following SDN Thread,
problem using BAPI_BUS2001_CREATE to create project definition
Check out a similar thread that we are discussing (for PR)
Custom Fileds Data Was Not Getting Updated In BAPI_PR_CREATE -
Hi,
We Recently upgraded our R/3 System from 4.6 C to ECC 6.0.
Shopping card number is getting created in SRM side and after approval it is getting sent to R/3 Back end,We have some customer fields that need to be populated in the back end from the shopping card,Which is not happening as of now.We are using the BAPI_PO_CREATE1 for creating the PO in R/3.We tried running the BAPI_PO_CREATE1 Standalone by giving the customer fields Table EXTENSIONIN and in Structure BAPI_TE_PO_ITEMS,But the custom fields are not populating in the PO.
Pls suggest,
Thanks
Rakesh.Hi Rakesh ,
1.wat is ur target table that ur custom fields were added using apped structure.
2. Have u passed the Communcation strucure also means
in ur case BAPI_TE_MEPOITEMX along with BAPI_TE_MEPOITEM .
Plz find similar code which is for sale order coding which may help u .
***Constant Declarations
Constant: C_BAPE_VBAP (9) type u2018BAPE_VBAPu2019,
C_BAPE_VBAPX (10) type u2018BAPE_VBAPXu2019
TYPES: BEGIN OF T_BAPE_VBAP,
VBELN TYPE VBELN_VA,
POSNR TYPE POSNR_VA,
ZZcontract_num type ZZcontract_num "Custom field
END OF T_BAPE_VBAP.
***Communication Fields
TYPES: BEGIN OF T_BAPE_VBAPX,
VBELN TYPE VBELN_VA,
POSNR TYPE POSNR_VA,
ZZcontract_numX type CHAR1,
END OF T_BAPE_VBAPX.
Declaring the Internal table and Work areas
DATA: I_EXTENSIONIN TYPE STANDARD TABLE OF BAPIPAREX. u201CInternal table for BAPI Extension Table
w_EXTENSIONIN like line of I_EXTENSIONIN, u201CWork area for BapiExtension Table
I_return type standard table of bapiret2,
W_return like line of i_return,
is_BAPE_VBAP type T_BAPE_VBAP, u201CStructure declaration
is_BAPE_VBAPX type T_BAPE_VBAPX, u201CStructure declaration
v_vbeln type BAPE_VBAP-VBELN, u201CVariable for the doc no
v_posnr type BAPE_VBAP-POSNR, u201CVariable for the itemnumber
v_zzcontract_num type BAPE_VBAP-ZZcontract_num, u201CVariable for the Contract number
Filling the BAPI table Extension Structure.
W_BAPE_VBAP-VBELN =u201D00001234u2019.
W_BAPE_VBAP-POSNR =u2019000010u2019 .
W_BAPE_VBAP-ZZcontract = 'ABC123'.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAP.
w_EXTENSIONIN+30 =W_BAPE_VBAP.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN..
k_BAPE_VBAP-VBELN =u201D00001234u2019.
W_BAPE_VBAP-POSNR =u2019000010u2019 .
W_BAPE_VBAP-ZZcontractx = 'X'.
*********same to pass Communication Structure.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAPX.
w_EXTENSIONIN+30 = W_BAPE_VBAPX.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN.
6) Then Call BAPI u2018BAPI_SALESORDER_CHANGE u2018to Update Sale Order with Contract number
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_SALORD_NUMBER
ORDER_HEADER_IN = K_ORDER_HEADER_IN
ORDER_HEADER_INX = K_ORDER_HEADER_INX
TABLES
RETURN = I_RETURN
ORDER_ITEM_IN = I_ORDER_ITEM_IN
ORDER_ITEM_INX = I_ORDER_ITEM_INX
EXTENSIONIN = I_EXTENSIONIN.
****COMMIT WORK AND WAIT.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.
Hope it may help you
Rgds
Sree -
Custom field not getting displayed in SUS PO item level
HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
KishanHi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan -
Custom fields not getting updated in Mass Maintenance-MM17
Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
GeetaI had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work
-
Data fields not filled in DSO Activation
Dear All,
I have written an End routine to extract data into a DSO to fill some data fields. The End routine will perform a lookup on another DSO and modifies the records of the result_package. The data fields are characteristics and hence in the transformation, they are set to No Transformation.
When I extracted the data into DSO, the new table has all the data fields correctly filled. But, after activating the request, all the data fileds data are erased. However, the keyfields data is still available in the Active table.
Can you please help me on this.
Thanks,
SrinivasHi Srinivas
I have faced the same issue.Data was coming till new table,but after activation fields were getting
blank.
There is no necessity for doing a dummy mapping. In the transformation screen you will be having an ikon near to the delete
routine symbol with an arrow symbol
similar to select all and unselect all, just clikc on it and then mention the setting as Update all the target fields need to be populated.
This will solve the issue, if it is not solved, then you can make a direct mapping to any of the field in the source, it need not be the
exact field in the target.
Thanks,
Saveen Kumar -
SRM 7.0 customer fields not saved in shopping cart
Dear experts,
I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document.
Any clues?
Another question, which is a bit techno, is when i have extended the SC screen using the enhancement framework instead of using the standard extension options. i would have thought that by binding these fields to the standard header node with the custom fields as structure would have saved me the job of throwing data and fetching data from the table/bapi. This isn't working either. I reckon the problem will be related to issue #1 above.
Regards
Ali>
Muhammad Ali Mahmood wrote:
> Dear experts,
>
> I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document.
> Any clues?
Hello Ali,
did you extend both the structure INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF? It should be useful to define a custom structure that contains your fields and append it to both the structure named above. Then re-check if the metadata structure has been enhanced properly (in your case, view /SAPSRM/V_MDF_IC).
Hope this helps,
Matteo
EDIT: I was assuming you were intended to add new fields at item level. If your task is to add fields @ header level, simply substitute HEADER to ITEM in the structure's name.
Edited by: Matteo Montalto on Dec 7, 2009 12:14 PM -
Custom field not getting populated in the "Show Results where" drop down
Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.
-
Custom fields not display in SRM5.5 Basic Data Frame
Hello Everybody,
I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
I added these fields by help of 672960 OSS notes..
Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance... -
Address Book, importing text tab file, custom fields not there
Searched thru all past posts. Found some that are close but not what I am trying to do.
Open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Keyword".
I also add two more custom fields in the Phone area called "Work 3" and "Work 4". There are other custom fields I need but I want to keep this short.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Keyword, Work 3 and Work 4 are there. All good so far.
I have a Now Contact file with about 800 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing?
That is my problem.
Adding new contacts as I get them, is fine. Importing 800 contacts with these custom fields is not possible.
I could map them to go to the Notes field along with actual notes but that is inelegant. The custom fields are there, why can't we use them to their full potential.
This appears to be a bug to me. Let me know what you think.Hi Adam,
Thanks, but the problem is not importing to AddressBook, it is exporting. I did discover from another that I can export very easily to a Numbers spreedsheet. It is exceptionally simple. But it will not export custom fields. Someone said that is because of a vcard standard. My custom fields are just "name" fields that I have labeled differently. But Numbers does not support the name (it only takes the name of the card).
Christine -
0HR_PY_1 Datasource: Fields not filled
Hello to everyone!
I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource and I have realized that the extraction program doesn´t fill these fields.
Do you know how can I do to make these fields to be filled?
The fields are:
- KOKRS_CO
Controlling area
Not filled
- CO_AREA_WP
Controlling area of master cost center
Not filled
-LSTAR_CO
Debited activity type
Not filled
VORNR_CO
Debited transaction
Not filled
GSBER_CO
Debited business area
Not filled
KOSTL_CO
Debited cost center
Not filled
BUKRS_CO
Debited company code
Not filled
NPLNR_CO
Debited network
Not filled
AUFNR_CO
Debited order
Not filled
PS_POSID_CO
Debited WBS element
Not filled
Thanks in advance!
Best regards,
Mª Victoria DuráThank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
Mariví -
Custom field not found in in the definition of EAI Integration Component
Hi,
I added a custom field to Account with integration tag "FirmsOfficesType". I got an error when I'm adding an account:
Element with XML tag 'FirmsOfficesType' is not found in the definition of EAI Integration Component 'Account'(SBL-EAI-04127)
Here is the soap message for adding a account:
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" s:mustUnderstand="1">
<wsse:UsernameToken>
<wsse:Username>user</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">passwd</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<AccountInsert_Input xmlns="urn:crmondemand/ws/ecbs/account/10/2004">
<ListOfAccount xmlns="urn:/crmondemand/xml/Account/Data">
<Account>
<Status>Active</Status>
<PrimaryBillToCity>KANSAS CITY</PrimaryBillToCity>
<PrimaryBillToCountry>USA</PrimaryBillToCountry>
<PrimaryBillToPostalCode>64150</PrimaryBillToPostalCode>
<PrimaryBillToState>MO</PrimaryBillToState>
<PrimaryBillToStreetAddress>1805 ABC ROAD</PrimaryBillToStreetAddress>
<PrimaryBillToStreetAddress2>STE 300</PrimaryBillToStreetAddress2>
<ExternalSystemId>OF222652</ExternalSystemId>
<IntegrationId>OF222652</IntegrationId>
<Location>OF222652</Location>
<MainPhone>+1 1235877526</MainPhone>
<AccountName>ABC Inc</AccountName>
<AccountType>INDEPENDENT BD A</AccountType>
<FirmsOfficesType>Branch</FirmsOfficesType>
<FirmName>ABC SECURITIES CO</FirmName>
</Account>
</ListOfAccount>
</AccountInsert_Input>
</s:Body>
</s:Envelope>
thxHi
Please go through the related pointers ->
The OSS note 672960 has already indicated you need to use BADI to address it.
For Search criteria
You can also use user-defined fields as search criteria. To do this, you have to set fields XINPUT and XDISPLAY to 'X' in table ET_FIELDS for the fields you want to use in BADI BBP_CUF_BADI_2 in method MODIFY_SCREEN. The fields defined this way are displayed if you choose the 'Extended search' link.
Re: Custom field in Create Bid Invitation..
Re: Search Help for Purchasing Group..
Re: urgent help request - How to add custom fields to header BID.
Re: New Screen with table control information in Process Bid Invitation
Do let me know.
Regards
- Atul -
PS 2013 - Changing the formula in custom field not reflected in the report columns
Hi,
The company where I work have a Sharepoint environment / EPM 2013 with about seven hundred registered projects.
We have a customer demand where it is necessary to change the formula of one of the custom fields of the environment. This field is used in some management reports made in Reporting Services and accessed by the entire board. The report uses as a source
'MSP_EpmProject_UserView' view.
The change in formula was simple, but we found that the change will not be reflected in the reports when the user saves the project in Sharepoint or publish the schedule associated with the Project.
I believe this is the expected behavior of the EPM, but I wonder if there is some other way than through the PSI, to publish all environmental projects.
Best regards,
Armando Machado Gonçalves - Sharepoint / EPM 2013Hello,
That is expected, it will not update until the project is open and republished. No automatic way to do this without automating project pro. Publishing all projects via the PSI wont cause the plan to recalculate, the plans will need to be opened.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS
Maybe you are looking for
-
My hard drive's gone, I did repair it and now I'd like to get my 'photoshop Elements 7 back, but got a message saying that the serial number is incorrect and it's not. can you help me, please?
-
Creative Cloud Application "Download Error"
Hello, first of all, this is a Repost the orginal Discussion is here: Creative Cloud "Download Error" message I repost this, cause the solution which was given by one of your Staff Members did not help me.. When I go to the App section on the creativ
-
Hello, my boss recently enlisted me to fix alot of her inventory and customer issues she is having in the store. The most pressing issue is gaining the ability to run a report that displays customers within a certain area. For example, she could find
-
Problem with 'HR_INFOTYPE_OPERATION'
Good day to everyone. This is my first post and I'm looking forward to get your help. I'm working on a project and I need to insert a record into infotype. The problem is when the program reach HR_INFOTYPE_OPERATION the system hangs! and you cannot e
-
How to perform an open backup? A closed backup is not possible, because afterwards the cache needs to be rebuild with the forms. The pop up of a mask would take too long. The backup has to be done in one step with a script file and using OS-Utilities