Customer master data using LSMW std batch input

Hello all,
i m using LSMW method to create customer master records in the SAP system.
we need to cover all the fields for addresses.
Following are my doubts :
1. some address fields are gettng truncated while loading customer master using std batch input program (for ex name1,name2,name3,name4,street..)
2. some fields are not part of std batch input program . how to load that fields
3. if we load address data first and then other customer data ,how to handle internal number range?
4. how to upload internation address data in the system? is there any bapi for that?
5 . how to upload additional communication data in address (ex mail,URL)
Please help asap. its required urgently.
thanks
Jigs
note : helpful ans will be rewarded.

Message type DEBMAS
Idoc type DEBMAS**  where ** is highest number available in your system (check via WE30). e.g. DEBMAS06

Similar Messages

  • How to upload different views of customer master data using LSMW-IDOC

    I need to upload customer master data  using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.

    convinient is the method that you can handle.
    but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
    In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
    the data can be in one source file, but need then to be maintained in a certain way
    Example1: all data in 1 structure
    GD1 - CC1 - SO1
    GD1 - CC2 - SO2
    GD1 - CC2 - SO3
    in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
    Example2: all data in 3 sturcures but one file
    GD1
    .CC1
    .CC2
    ..SO1
    ..SO2
    ..SO3
    Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
    FILE General data:
    GD1
    GD2
    GD3
    file Compamy code data:
    CC1
    CC2
    CC3
    file Sales org data:
    SO1
    SO2
    SO3
    LSMW is flexible and can handle each of this scenarios, are you flexible too?

  • Loading customer master data using lsmw and bdc

    Hi all..
    Iam a beginner in sap world and my first project is to load the customer master data from mainframes into sap.
    Can anyone guide me how to approach to this project and what are the best materials to go through. Also can any one send some sample programs related to these..
    It would be a great help of you guys for a beginner like me..
    Thanks,
    mahi

    Message type DEBMAS
    Idoc type DEBMAS**  where ** is highest number available in your system (check via WE30). e.g. DEBMAS06

  • I am unable to upload the customer master data using BAPI.?

    Hi Guru's,
    i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
    Please guide me how upload the data...
    Thanks in iadvance
    Srinivas...

    Hello Srinivas
    This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
    The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
    The BAPI does the same like transaction XD01 with Reference.
    Regards
      Uwe

  • Export materials master data using LSMW?

    Hello gurus,
    is it possible to export material master data using LSMW? Or are there other ways to do this (apart from manually selecting the desired data from the DB tables?)
    It would be great if anyone could point me to some documentation on this.
    We would like to export the master data from one SAP system and import it in another one.
    Thanks in advance
    Alicia

    What I usually do is transferring the data via ALE (BD10) as IDOC to a file (instead of a different system). This file can even be located in an shared folder that can be accessed from both SAP systems
    Then I use LSMW in target system, map IDOC to IDOC (almost done automatically) and import the data from this file, and beeing able to exchange field values if necessary.

  • Getting error while uploading gl master data using LSMW batch input data

    Hi Experts,
    I am getting error while uploading the GL master data through lsmw using batch input recording.
    After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
    and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

    Hello,
    Kindly post in the FI forum to get a better response.
    Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
    Kind Regards // Shaubhik

  • Problem in Customer Master Upload using LSMW

    Hi,
    I am using LSMW direct input method to upload customer master. I have used ZSOURCE structure as parent structure and for multilple entries like Bank details and contact details i have used other child structure like ZBANK and ZCONTACT. I am using separate flat file for Bank and contact details.
    I have used one common field 'ID' as the first field both on ZSOURCE, ZBANK and ZCONTACT structure to link-up. Thus, i am able to load multiple records for Bank data. But i am unable to get contact details.
    Also, value for Reconciliation account(KNB1-AKONT) and sales group(KNVV-VKGRP) is not passed to screen.
    I have checked 'Generate Read Program','Read Data', 'Generate Conversion Program' and 'Convert Data' step again and again. Upto step 'Display Converted Data', data is converted successfully, but the same field values are not passed to screen.
    Can you pls help me to get the value..

    Hi,
    LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
    check that single charecter field, if that is X that means the header record is processed, and do the items.
    and, this is another way, try this out also
    YOu can do this in "Define Source Structures" step,
    the HEADER is defined first,
    then the DETAIL below the HEADER.
    add the fields to the structures.
    Both should have some common key field
    Please take care that the name of the common field is the same.
    Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
    Re: Table control in LSMW

  • Transferring MATERIAL MASTER DATA USING lsmw

    I am using LSMW to transfer material master data from text file using direct input program RMDATIND.  The problem is that the field WRKST in screen is of 48 characters while the batch data structure BMMH1 of field WRKST contains 14 characters. How can we transfer the full 48 characters in text file to THE FIELD BMMH1 IN DIRECT INPUT PROGRAM. Can we write any translation or routines . If yes, how is it possible. I can do the same using BDC but our client is already using the LSMW , only the new field WRKST for material has to be inserted. It is picking only 14 characters.
    Regards
    Debopriyo

    Hi
    Kindly use the sap note 351557 it is applicable for your release
    if you have any further clarifications let me know
    Regards
    Damu

  • PO creation using LSMW through batch input method

    Hi, I am new to working with LSMW and i have completed a project for creating purchase orders using the direct data input method. I need to do the same using batch input method, however in the maintain structure relationship step, it is only allowing me to assign one structure to the recording that i have done, however in po creation we need separate (nested) structure for header and line item, could anybody help me past this please?

    Hi Rudra!
    OK, now you just know, why you have only one line, not multiple PO item lines. To get a dynamic number of items, you need a complex program - just like standard direct input.
    If you need a field, which is not part of this program, don't try to write your own program for batch input - it's just to much work before you have a good result.
    You can use Bapi method instead with BAPI_PO_CREATE1. This can handle a lot of fields and there is some documentation available how to fill the Bapi.
    If this looks to complicated in the first moment, think about creation of POs via direct input and a small batch recording to change your additional field(s) afterwards. (You can select EKPO table to generate list of 'wrong' migrated orders for input in LSMW.) Use field 'Item' in the bottom of ME22 to position your desired line in first screen line, just change one PO-line after one other (every time a 'save' -> no problem with different number of lines / PO).
    Regards,
    Christian

  • Upload Vendor master data using LSMW

    Hi All,
          i am working on LSMW for uploading the Vendor master data (XK01),
    when i execute the 13 th step (Create batch input session), i got a message like
    "Editing was terminated" .
    Could you please tell me why that message is comming.
    Regards,
    Amjad.

    hi
    good
    try with these links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/smartforms/smartform%20in%20abap.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/smartforms/tutorial%20with%20code%20sample%20on%20smart%20forms.pdf
    thanks
    mrutyun^

  • Re:Uploading of material master data using lsmw-idoc method

    Hi friends,
                While processing each idoc  one log on window is opening,and status of idoc is 51,eventhough i am passing material description to maktx of e1maktm,it is showing an 'No description is passed'.
    Colud you please tell me how to correct these errors,i am new to this lsmw-idoc method.
    Thanks in advance,
    Anusha.

    Thank you for reply.
    Actually I am uploading the data in flat file from file port to sap.
    In idoc inbound processing of lsmw i have created a file port and iam giving the logical system name of the same client.
    is this the correct procedure.
    Every time when i process each idoc one new logon window is opening and it is showing idoc status as 51.
    could you please tell me how to correct this one.

  • Customer Master using LSMW standard batch

    Hi All,
              I am uploading the customer master data using LSMW standard batch input method. When i process the session created using this i am getting an error that input data that "No batch input data for screen SAPMF02D 0310". This is happening when it reachs the sales area screen. All the remaining screens are processed correctly.
    Please help me in this regards,
    Thanks & Regards,
    Sudheera

    Hi,
       Refer
    https://forums.sdn.sap.com/click.jspa?searchID=9408057&messageID=4828875
    Regards
    Kiran Sure

  • XD01 assertion failed error while updating customer master data

    Hi Guys,
    This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
    The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
    The error is as follow
    ASSERTION_FAILED
    Short text
    The ASSERT condition was violated.
    What happened?
    In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
    activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
    for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
    The things that I have tried and not work
    using xd01, fd15, fd16, fd01, does not wok and gives the error as above
    The things that I have tried and it works
    Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
    So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
    My number is 9820029197
    Will also keep you'll posted on any developments on this case,
    Ronan Pinto

    >
    > Firstly I am from SAP FI, so totally new to SAP SD
    >
    Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the  profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the  balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
    >
    > 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
    >
    I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the  change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is  a crooked method and/or not a professional method.
    >
    > 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
    >
    As explained above, how the sales will be accounted  in different company codes (even if the system allows  to assign the same sales org to different company codes)?
    I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
    Regards,

  • Problem in Uploading sales order text data using LSMW

    Hi All,
    I am facing Problem in uploading open sales order data from legacy to SAP using LSMW.
    We are trying to upload sales order data using LSMW Standard Batch/Direct input using program name RVINVB10 and program type D. We are not able to upload item text but have no problem in uploading remaining data.
    the details we are passing to BTEXHKOM structure are......
    BTEXHKOM-OLDNR = IHEADER-OLDORD_NO.
    BTEXHKOM-LAISO = 'EN'.
    BTEXHKOM-TDID = 'Z009'.
    and the for structure BTEXLKOM
    BTEXLKOM-OLDNR = IHEADER-OLDORD_NO.
    BTEXLKOM-TXPARGRAPH = '/'.
    CONCATENATE LITEM-DEPTID LITEM-DEPTNAME
    INTO BTEXLKOM-TXLINE SEPARATED BY ' '.
    we have three input source structures.
    IHEADER Header structure
    LITEM Line item structure ( Material data )
    IPARTN Partners structure
    The structure relationships are
    BTEXHKOM <<< IHEADER.
    BTEXLKOM <<< IHEADER.
    Please let me know if I am doing some thing wrong or some thing else need to be done.
    Thanks,
    Chindam.

    you can pass below values also
    OLDNR         :  order number and item nuber
    TXPARGRAPH  : VBBK
    TXLINE        : your text.....

  • BAPI CUSTOMER MASTER DATA

    Hi
    I want to create Customer Master data using BAPI 
    Can someone tell me what is step by step procedure for this.or just an example code.
    Thanks 
    Namrata.

    hi
    use the BAPI BAPI_CUSTOMER_CREATE.
    Go thru the documentation of this BAPI for more details..
    Cheers,
    Abdul Hakim
    Mark all useful answers...

Maybe you are looking for

  • Custom Screen using BADI seen in ME23N, ME22N Display, but not in ME21N

    Hi, I have developed a custom screen for purchase order using badi ME_PROCESS_PO_CUST and ME_GUI_PO_CUST. But, its not visible in ME21N, whereas its dipalyed in ME23N, ME22N . Please advise. Thanks, Shivaa....

  • Help with event listener

    I'm having some trouble trying to figure out how this event listener will work. The main application is building an arrayCollection of a calendarDay custom components which is displayed by a DataGroup. Within each calendarDay custom component i may c

  • Problems with display

    So I was using my G3 800Mhz iBook this evening and was reading a web page when the screen went weird and these horizontal lines appeared all over the screen. The machine would not respond to any input so I forced it to shutdown. I restarted the devic

  • Anybogy know anything about PHP Classes & Objects?

    I need some guidance. I've got a problem that I think I know the way around, but need a bit of help. Basically I'm trying to create dynamic classes - which I don't think I can do. I *should* be able to, but for some reason I can't make my mind see ho

  • Strange Issue  with Logout | Shared Library in WebCenter

    For our customer, we have written a couple of task flows. We deployed this as an ADF Library JAR and included the JAR into our WebCenter Portal project (using IDE Connection -> File System Connection). We then placed the task flows onto a few portal