Customer master-idoc issue

Hai gurus,
the scenario is that ours is a sender system and other is receiving system.
customer master data is sent form our system and other receives it.
what happened here is idoc is sent to the other system and data went to other system is incorrect
example : sender system Receiving system
customer master
First Name DAVID constant
Last Name DECOSA DECOSA
so when the idoc is sent the 'first name ' of the customer is getting "constant".
what could be the possible reasons for it?
It is urgent and could help in this case.
Thanks in Advance
sameer

Hi
No filteration is maintained in bd64; and in the other case in the segment data also from outbound side all data relevant to first name and last name are correct;
Now what step can be taken?
Thanks in advance
sameer

Similar Messages

  • Itegration with Websphere Message Broker and Customer Master IDOC

    Hello All. I am new to this forum. I have a couple of questions.
    What I am trying to do: I have to interface to SAP with Websphere Message Broker which has inbuilt nodes to interface with SAP using BAPI or ALE to send Customer Master Record (create/update/delete)
    The questions I have:
    1/ Has anyone done this? What did you use BAPI or ALE?
    2/ When a Customer Master IDOC is sent to SAP, if successful, a return code is sent back by SAP. This indicates that SAP has received the IDOC successfully. However, our requirement is that we have to know whether the IDOC was successfully posted within SAP. I am of the opinion that this is manual task within SAP and it should not be the function of the middleware layer as its responsibility is only to successfully deliver the IDOC's. I would welcome opinions on this issue. Please let me know If there is a way to determine if the IDOC has been successfully posted in SAP.
    3/ Is there anywhere where I can get an XML representation of the Customer Master Record. I want to see the structure and the available fields. How can I get this info from SAP?
    Thank you

    Hi;
    Similar issue has been answered at -Steven Chan blog*
    From blog:
    Hello, RM,
    I have not seen any Oracle-produced documentation along those lines. I don't think there are any Oracle teams that are investing in producing documentation for IBM WebSphere.
    I would suggest contacting IBM to see whether they have produced any WebSphere-specific documentation.
    Regards,
    Steven
    Referance:
    http://blogs.oracle.com/stevenChan/entry/ebusiness_suite_release_1211_now_available
    Ps: You can rise SR for your issue also
    Regard
    Helios

  • How can I include Customer Hierarchy in Customer master IDoc -DEBMAS06 ?

    Hi,
    I am generating Customer master IDoc using basic message type DEBMAS06. But when I include customer hierarchy data while creating customer master, it is not included in any of the segments. The segment containing the data from KNVH is not included in standard.
    How do I include this hierarchy data in the IDoc? If I create a segment, under which basic segment should it  be included and how to update the data in the segment?
    Can anybody help?
    Points assured.
    Best Regards,
    Rajendra

    Hi
       You can use LSMW :-
    1) Create a project , sub project and an object.
    2) execute it from 1 st screen to enter the object.
    3) You will find proces steps.
    4) In Maintain Object Attributes  choose Program Name RFBIDE00.
    or I-DOC or the way you want the input to be.
    5) You can proceed from there following the instruction..

  • Customer master idoc scenario

    Hi gurus,
           customer master idoc should be sent based on customer group in sales area data of customer data.
    for example if customer group is 01 then this customer master data  should be sent as idoc and if customer group is 02 then this data should not be sent.
    How can this requirment be fulfilled.
    Thanks in advance
    sameer

    >>u can use synch-Asynch bridge using BPM
    This can not be done via sync-async bridge.There are 2 reasons for this
    1.He has file adapter as sender and that doesn't support synchronous scenarios.
    2.He has standard IDOC as receiver.there is no way you can fetch customer# from IDOC without writing a custom program,Thats why i said he need to either use RFC/Proxy or do some custom development.
    Thanx
    Aamir

  • Customer Master Idoc DEBMAS

    Hi
    I kindly ask you how can I send customer master IDOC in full. I am using change pointer and change pointer allows only to be send ,changed fields other fields are filling with '/' character. Is there any way to send this '/' what is in original

    Idoc type will change with the SAP release version with changes in the segments. You may see the difference in segments if you Compare DEBMAS01 and DEBMAS06 segments.  Always use the Idoc type which of the current SAP Release.

  • Why customer master idoc named like DEBMAS?

    hi,
    i am just curious know why customer master idoc named like DEBMAS?
    vendor master data idoc as cremas?
    any German abbreviation or English abbreviation behind this will be appreciated.
    thanks & regards
    Raja
    Message was edited by:
            Raja

    To my knowledge I do not think that the naming has anything to do with the German translations since in German:
    Customer = Kunde and
    Vendor     = Verkäufer....
    However the naming has some connection with the Business Case behind customers and vendors. In SAP, a customer is a business partner whose account you debit for money, hence the name DEBMAS and a vendor is a business partner whose account you credit money, hence the name CREMAS.
    PS: Reward points and close the question if you find this helpful.
    Regards.

  • IBAN Update Issue in Customer Master IDOC

    Hi Experts,
    We need to pass the IBAN No and Swift COde via Customer MAster Interface (DEBMAS) . So IBAN No and Swift Code is being correctly updated in E1KNBKM segment . But when IDOC is processed these IBAN details are not passed to Customer Master.
    I have got OSS Note no. SAP Note 1097088 - Using ALE to distribute the IBAN: I tried configuring distributiion model as suggested in OSS Note . But still it's not working .
    PS : Bank key and Bank Account No is not passed to the IDOC .
    Please suggest how this issue  can be resolved .
    Regards,
    Kaustubh.

    Hi Kaustubh,
    SAP Note 1097088 describes using ALE to distribute the IBAN using 'IBAN_SAVEREPLICA' message type, which needs certian ALE config detailed in the note.
    However note isn't relevant as you plan to send details in DEBMAS, I'm trying to understand what field in E1KNBKM (Master customer master bank details and bank master) are you using to send the IBAN # and what table/field do you intend to save it in target system ?
    Regards,
    Abhijith.

  • Posting only customer master IDOC which has data change

    Hello experts,
    I need some help urgently.
    We have a scenario where a third party system sending customer master data using IDOC's. The issue is the sending system is posting the entire customer master thru IDOC's . Now we want to pick only those IDOC's which has undergone change.
    Is there any standard way of doing this or i need to write code in user exit to compare data?
    Awaiting responses
    Thnx
    Harry

    Ya I agree. I think this solution is the only solution which we can think of now.
    Thanks !
    If any one has a different idea please post
    I am closing the thread

  • Custom Master Page Issue in Intranet

    Hi All,
    I hope someone can assist with this, we implemented this particular SharePoint 2007 portal approximately 5 years ago.  An outside consultant created this custom master page, for some reason out of nowhere we are experiencing this bizarre issue with
    the master page and checking in and out documents. I have attached an image showing the error message being displayed below(couldn't attach until my account was verified but it states 'Error invalid viewstate, port 52208, user agent Mozilla/4.0..., viewstate,
    referrer, path).  I came across one source on the web that stated something about the search box code and it causing issues out of nowhere on the master page.  So in my dev environment I made the change and removed the following code from the master
    page below.
    <td style="padding-top:8px;" valign=top>
                <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server">
                <SharePoint:DelegateControl runat="server" ControlId="SmallSearchInputBox"/>
                </asp:ContentPlaceHolder>
    </td>
    As soon as this code is removed and the page is published again everything begins to work again, the problem is I can't remove search from this intranet portal as it is heavily used.  Any assistance would be greatly appreciated.

    By any chance, do you still have access to the solution package in which the master page was contained? Normally, you would see another .ascx user control overriding the delegate search control in there. I'm almost positive that this custom control is
    what causing this issue.
    Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

  • Custom Master Page issue with Document Set Libraries

    Details: Publishing site using SharePoint 2013.  The SharePoint is on my company's servers.
    Have a custom Master page that has a navigation banner (built with HTML/CSS/javascript).  The site has it applied successfully to the "Site Master Page" but when I also apply it to the "System Master Page", the libraries that have
    Document Set type content do not show the files within.   We'd like to be successful in applying to the "System Master Page" as that allows the banner to show when an actual library is accessed.    Any suggestions, please?

    Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
    roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
    If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
    On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
    This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
    It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
    Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
    custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
    Thanks again,
    Steven

  • Custom master page issue only some pages not all (spwebpart manager)

    Hi i am using html custom master page in  sharepoint 2013, In my search page (home)  working properly without any issue,
    But in my Result.aspx page showing below error. 
    A WebPartZone can only exist on a page which contains a SPWebPartManager. The SPWebPartManager must be placed before any WebPartZones on the page.
    How to solve this? Thanks in advance

    There are 4 web parts in this page
    1.Refinement
    2.Search Box
    3.Search Navigation
    4.Search Results

  • Custom master page issue in subsites

    Greetings!
    I've run into an oddity with a custom master page on my SharePoint 2013 Enterprise server. I copied the html for the seattle master page, renamed it so it wouldn't change the seattle master, made an addition to it to add a reference to a custom css
    file, then threw it back up on the site so SP would make a new .master file with it. I created a new web app and site collection, put the custom css file in the Style Library and added the custom master page to the Master Pages.
    So, all that being done, I changed the look of the top level site to use the new master page and it looks great and seems to be working as expected. We've got a number of subsites planned for underneath this top level site, I'm thinking no problem, just
    put the custom master file in the master pages and we'll be good. So I create a subsite, put the custom master page in the subsite's Master Pages, change the look. The master page and custom css apply and it looks good, but, then the problem starts.
    When I go into a document library and change a view or add a view or delete a view I get back an odd response page from SP. In the url I see this: https://topsite/subsite/_vti_bin/owssvr.dll?CS=65001
    and in the body of the message: 69|pageRedirect|owssvr|https://topsite/subsite/Shared%20Documents/Forms/AllItems.aspx|
    When I go back into the subsite, whatever change I was attempting when I get these results worked fine.
    So, why does my custom master page work fine on the top level, but not on the subsites? If I switch the subsite back to the Seattle.master, the oddity goes away, so that tells me it's something to do with my custom master page and/or custom css. I did
    some searching for owssvr.dll?CS=65001 and didn't see anything that helped. I checked IIS and the web.config file and don't have ASP.net tracing on that I could find.
    All that the custom css is doing is increasing the size allowable for the site icon (.ms-siteicon-img) to allow for a larger icon (180px square) and it pushes the side Nav Box down a bit to make room for the larger icon and changes the font size for the
    side Nave Box (#sideNavBox). Since it works on the top site, I'm not suspecting the css, but, it's not making sense to me why the custom master page wouldn't work in subsites either.
    I ran into this issue earlier, it was showing up when deleting folders from the document library. I thought I'd made a boo-boo somewhere in creating the custom master page, or how I'd added it, or something (kind of a learn as I go situation here), so I
    deleted the entire web app and recreated it, hoping for a clean start and a good master page and everything would be good. Guess I'm still missing something.
    I swear that the ONLY change I made to the seattle html file for my custom page was to add this line just below the corev15.css line: <!-- SPM:<SharePoint:CssRegistration Name="/Style Library/skcustom.css" after="corev15.css" runat="server"/>-->
    So, that's my sad story. Any suggestions, other than to punt on the custom master page?
    Thanks!
    Steven

    Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
    roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
    If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
    On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
    This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
    It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
    Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
    custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
    Thanks again,
    Steven

  • How to find - Customer Master IDoc was created Manually or by Change pointe

    Hi all,
    I have an IDoc(Customer master) number (which I have taken from the payload in SXMB_MONI).  I would like to know whether this has been created by a user manually(BD14) or by a change pointer.
    Please help.
    Cheers
    danus

    Hi Vardharajan,
        Yes I agree with you. What I mean by IDoc created by change pointer is - 'IDoc generated because a change(pointer) is tracked by the system', in other words, due to some change made to the data.
    As you know, the other option of creating IDoc is by BDxx transaction. This option is usually used to push (unchanged) data.
    So in essence, what I am interested to know is , has the IDoc been generated because someone made a change using say, VD02 / XD02 or pushed the data manually.
    Please do ask, if anything is not clear.
    cheers
    danus

  • Customer Master IDOC

    Hi all,
    I am new to IDOCS. And i have some knowledge regarding the same. Now i had a requirement to send as well as obtain customers from other system.
    So can i know how can i procceed. Please can any body explain me step by step how to do In-bound and Outbound fro the Customer master. And also the problems we are going to face.
    Thanks and Regards,
    sagar

    Hi,
    Do make the ale set up as per the previous posts....
    Pondering over the problems that you might face, as you had asked for might be any of the following....
    1. Idocs might not get generated, i.e., 0 communication IDocs would be generated in which case you need to re-check the distribution model configuration.
    2. If IDocs are generated, they might fail in any of the error status (status 02, 26, 29 - outbound or status 60, 51, 56 - inbound) in which case you would have to rectify the error according to the status text and then reprocess the IDocs using the standard programs, RBDMANI2, RBDAGAIN based on their present status.
    3. Idocs might stay in yellow status(unprocessed IDocs - status 30 (outbound) or 64 (inbound)) in which case you would have to recheck the partner profile configuration and then push the IDocs via programs RSEOUT00 or RBDAPP01 respectively.
    6. In case if you tend to use serialization of IDocs, IDocs might fail in 66 status(inbound) at which point of time, you need to check with the serialization.
    These are a few normal cases.......you might come across a few weird ones to.....
    ~ Bineah.

  • Question on customer master IDoc

    Hello!
    This will probably be easy points for someone. 
    I am processing an inbound customer master using the IDoc type DEBMAS02.  When I process the IDoc through WE19 in the background (with debugging on), the customer is created - no problem.  But then, the IDoc fails with status 65 stating that "Cross-system company code 0001 does not exist."  Is there a piece of config that I am missing to set up the company codes?
    Thanks!
    John

    Hi John,
    I have the same problem. When I process the IDoc through WE19 in visible mode, the customer is created - no problem. But when I process the same IDoc through WE19 in background mode ,then the IDoc fails with status 65 stating that "Cross-system company code 0001 does not exist."
    The first IDOC has also status 65 but final status is 51. Is there a piece of config that I am missing to set up the company codes? Did you fin the solution?.
    Regards,
    Juan Ventura.

Maybe you are looking for

  • Word Counts in HTML Help

    I have about 800 topics in a RoboHelp HTML help project. I need to send the files out for translations, so I need to get a word count. Is something in RoboHelp that will generate a word count on all files in a project?

  • Best way to automate visio diagram on sharepoint

    Hello, I've created a visio diagram from sql data and published on sharepoint as .vdw file. Its an orgchart diagram. The orgchart shapes are updated based on the values from the sql table data. But when new rows are added to table or rows are removed

  • ESS 1.2 - ABAP Web Dynpro Clarifications

    Hi all, We are on Ehp 2 in ECC 6.0 with ESS 1.2 in EP 7.0 and using only 'Travel & Expense' part for our implementation. I have below clarifications 1. In ESS 1.2 package we have an Overview page and iView, I believe it is for JAVA Web Dynpro, will t

  • Adobe Reader for mobile search result is INCORRECT.

    Adobe Reader for mobile search result is INCORRECT. It is inconsistent with the search results from other PDF reader apps. I have a spreadsheet file converted into a PDF. Doing a search on the document using a Adobe Reader on a PC shows 14 search res

  • Smart Objects not Updating in PS CC

    I'm designing elements in Illustrator CC and then copy and paste them into PS and select  Create Smart Object. I've also tried saving the AI element and then placeing in PS as well. Then if I double click the smart object to edit it, it will open up