Customer master Post code and city field Issue

Hi,
I am facing a problem with the customer master, In the address tab postal code N0N 1J2 is giving a default value in the city description tab, However the defaulted value is not the correct one.
Eg. if post code 123 has to display DELHI it displays BOMBAY.
Can you suggest where can i change the defaulted value. Is there a table entry missing that should allow this city / zip code combination? Where are these settings maintained.
Rgds

Hi Prabu,
Check this link it would be helpful to your solution
http://forums.sdn.sap.com/thread.jspa?threadID=1962002
Let me know if your problem is solved
Regards
Pradeep

Similar Messages

County Code and City Code in CRM

Hi Guru,
We are having big issue now. Our CRM is fully integrated with ERP, our user want to have the county code and city code in CRM customer master creation. Seems these two fields are not available in CRM, please advice.
Rgs, Michelle

Hello Michelle,
IN BP Transaction code if you expand the Addess Tab you will find "City/State/ZIP Code"
Here you will get City code.
You can use ZIP Code to map the Country code.
Regards,
Rajendra Sonawane

Clearing the the street,Postal code and city in partner tab at sales order

Hi Experts,
I have a requirement like in sales order header or Item, In partners tab, when they are selecting the particular partner function like CR and the customer number is 500, and if they press enter then automaticaly it fetches the name,street,postal code and city at the right side for that entry. My requirement is like for particular customer 700, they want to hide the customer address in that Partner tab while sales order creation VA01. If they select the partner function CR and customer 700, after pressing enter, it shouldn't fetch the automatic address of that customer. They just want the customer name and remaining fields like street,postal code,city should be blank.
Can you please let me know how to reach this requirement ate sales order creation or change level in partner function tab.
I test these exits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 but no use. Let me know possible ways to achieve this?
Any idea on these?
Thanks in advance ,
Edited by: dolly B on Jan 18, 2010 11:36 AM

Hi,
This is happening because you have not maintained your data in sales order.
Billing document takes the reference of order and delivery document for taking the data.
Now if you donu2019t maintain your partner function in order nor in delivery then it wont be determine in billing document.
If you want ZZ to shown in billing document then you have to make that function visible in sales order.
While creating sales order it will take it from customer master data but when you are creating billing it wont search in customer master data it will search in sales order only.
You can do one thing make that function non modifiable in partner determination procedure.
So it cant be change in sales order.
But I want to know why you want that should not be visible in sales order.
Hope so I will be correct with my explanation.
Regards
Raj.

Sales office authorization check in customer master,Sale order and billing

Hello Experts
We need to restrict authorization for customer master, sale order and billing based on sales office.
Can somebody guide me how to activate this ? Has anyone of you have successfully done that?
Regards
kumarlib

Hello Kumar,
User authorization is within Basis expertise, but if you want to get some feel for what authorization objects are take a look at trans SUIM. But basically how it works is for a given transaction the level of check is specified -- in this case Sales Office. Based on values stored in that field the user is allowed or not allowed transaction access.
So you determine whatever the needed matrix is for authorization restriction (i.e. user A can access Sales Office xxx, user B can access Sales Office yyy & so on). Also give Basis the transaction codes to restrict, along w/the technical table/field for each (like from customer master - KNVV-VKBUR, from sales doc level VBAK-VKBUR). Basis sets up the authorization object w/assignments to the users accordingly.
This is standard SAP & your Basis support should be familiar with it. Good luck.

"SYNTAX_ERROR" while creating customer Master T-code-"FD01

Dear All,
Getting an error "SYNTAX_ERROR" while creating customer Master T-code-"FD01". The error as follwoes
Short text :Syntax error in program "CMD_EI_API_CHECK==============CP ".
What happened? : Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
     has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
     "CMD_EI_API_CHECK==============CP " in include
     "CMD_EI_API_CHECK==============CM04T " in
    line 82:
""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
    " convertible in a Unicode program. ."
The include has been created and last changed by:
    Created by: "SAP "
Last changed by: "SAP "
    Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
     has
come across a statement that unfortunately cannot be executed.
Error analysis :The following syntax error was found in the program
     CMD_EI_API_CHECK==============CP :
    ""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
    " convertible in a Unicode program. ."
Information on where terminated :Termination occurred in the ABAP program "SAPLCMD_BTE_OUTBOUND" - in
     "CMD_CUSTOMER_BTE_1321_IMPL".
    The main program was "SAPMF02D ".
In the source code you have the termination point in line 330
    of the (Include) program "LCMD_BTE_OUTBOUNDU01".
Please help us on this,
Thanks in Advance,
Kumar.K

Dear Kumar,
please kindly apply the SAP note 1511101.
I hope this helps.
Mauri

Service for creating customer master - company code data....

Hi
I would like to know if there is a service to create customer master company code data?
I have identified 2 services one for general data (CustomerERPCreateRequestConfirmation_In) and sales area data (SalesArrangementERPCreateRequestConfirmation_In).
Regards
Srinivas Dusi

Here is the answer: Yes it is possible. Download the file, using option - File Download. File should include all key attributes & also attributes that needs to be updated. (Key here is to have appropriate assignment ID. )
Use the same file for File Upload (modify attributes like Sort Key as required).

HT4623 Help i dont have a post code and i cant start i tunes on my iphone4s without it ??

Help i dont have a post code and i cant start i tunes on my iphone4s without it ??

Surely even if you live in a country area you should still have a post code - contact the postal services where you live and ask them if they can provide you with one. Even if you are in the back of beyond, everyone still has post code.

Need to pull postal code in SO from customer master instead on postlcd/city

I want postal code to be pulled in sales order - partners tab for bill to party from customer masater/ under PO box adress.
Currently it is pulling postal code/city from customer master/ under street address.
Is there any standard con-fig available for same ?
please reply,
Thanks and regards,
Sujit

normally not but in asset reporting there seems to be a relation between structure and report-name (not tcode)
go to tcode se11 and search for structures with search term FIAA_SALVTAB* and you'll find some structures.
The last part of the name (RABEST, RABEWG ) is the link to the report (RABEST01, RABEWG01)
hope that helps
Andreas

Customer master - Group Code in Additional Data screen

Hi,
In customer master, in the 'Additional Customer Data' pop up screen (Extras -> Additional Data), you can find a field for group code (KNA1-KATR6). Where in IMG do I maintain the values for this field?
Appreciate your advise. thanks!

Hi,
You can maintain this values in the below path
IMG->LOGISTICS GENERAL->BUSINESS PARTNER>CUSTOMERS->CONTROL->DEFINE ATTRIBUTES->CUSTOMER ATTRIBUTES 6
In the above path you can define the required entry and it will appear in the Customer master configuration.
regards,
santosh

Vendor Master post code control in drop down option.

Hi,
I want to control In Vendor master drop down option, post code should not display in drop down for particular account group.
How I can control in drop down option.
Please help me.
Br,
Hanuman.

Hi,
As per your requirement, you want supress the drop down specific to the account group for given filed.
Basically F4 option is coming from the search help defined for that specific field not by the account group. So as long as the serch help designed to that field it will always comes. You can not control that from any field selection keys.
I hope you understand the concept of search help.
Thanks,
Satya.

BAPI function create Customer master(T-code XD01)??

Hi All,
i want to create BDC program using BAPI function create Customer master(upload customer master),but i do not know which BAPI function for create Customer master.
Does anyone know,please tell me which BAPI function i can use?
Thanks.
Van Dung

Hi Amit Gujargoud,
I can use LSMW upload the data from legacy system to sap system., but my manager he did not want to use LSMW.He wants to use BAPI function for upload customer master.
I saw this BAPI function create customer master : BAPI_CUSTOMER_CREATEFROMDATA1,
BAPI_CUSTOMER_CREATEFROMDATA,
it is not enough field for input data.
example : if i want input : customer code,company code, Sales organiration,Distribution channel,Division.
So This BAPI function have not paramaters input this field.
Thanks for your answer
Van Dung.

In customer master how to default a field

HI All,
In customer master how to default '1' in tax classification field for all new ship to party ?
Thanks in advance....

Hi,
Try these below given enhancements..
exits :
SAPMF02D
badi's:
CUSTOMER_ADDRSCR_CHG
CUSTOMER_ADD_DATA
CUSTOMER_ADD_DATA_BI
CUSTOMER_ADD_DATA_CS
Take help of an ABAPer, he can help you out on this regard...
Reg
JJ

New fios customer as of today and having some issues.

Just had fios tv and internet installed today. I understand with there is going to be a learning curve and have done some searching however I have not found a solution. I also contacted online support but was told the system is down and they basically couldnt do anything.
First thing we noticed is that our living room box 1.9- qip-6416-p2 wont display the guide in full screen. It only shows us one hour ahead and is cut off on the sides with black bars. This is a 52" wide screen and the settings on the box are set correctly.. This is when it is set to full mode on the guide.
The box in the bedroom qip-7100p2 displays the guide fine in full mode
I have reset the box and the router and this did not help.
I also have a problem trying to acces the dvr information online both boxes display BAD GATEWAY..
I am also unable to use my android phone as a remote. It tells me the last four digits of my number are incorrect.
Any input would be greatly appreciated. In the meantime I suppose ill do some more searching. Thank you.
EDIT: Just found some information regarding the 6xxx boxes saying they do not support the HD guide format? Is this true?
I hope to get the issues solved fast. I still havent canceled charter and DTV but would sure like to.
EDIT: AND now as of a few minutes ago the router had just rebooted all own its own... i hope this isnt a sign of things to come.

Brian I am sorry that you are having these problems. You are correct about the 6xxx boxes not able to get the guide in HD format and the chop off. We can remedy this. I have sent you a private message to get more information from you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Customizing Task type (Status and Completed fields)

We have created our own "MDAction" custom type. The primary reason is that we need different values of "Status", and we dont want to mess with the built in "Task".
We have created lists based on MDAction and it works fine but we have one issue:
The users wants the behavior with Date in red when over due. Fine.
But when we remove the build column "Completed" (that gives provides the "Checkbox") - this column sets the original "Status" field to "Completed" and not the "MDAction". Having the "Completed" fields
confuses the users.
To our surprise, when wh remove "Completed", also the behavior with overdue Dates in red disappears.
How does this work, and how can we have "red over due dates without the completed column in the view"?
Thanks,
Jorgen

Hi Jorgen,
According to your description, my understanding is that you want to remove ‘Completed’ column and make the Due Date red when the date is due.
As a workaround, you can customize the task form with InfoPath, and remove the ‘Completed’ column in the form view. For the Due Date with Red, you can create a rule for the Due Data column, the rule is like:
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Customer master data search and use limit

Hello everyone
I have a problem that our customer want to limit that A user of SAP can search and use the customers master data which he or she created only .what should I do ? thanks!

Wierd requirement!! What will happen if the employee quits the company and a new employee takes his position and you give him a new user ID?
I dont think it is possible through configuration/authorization. You might have to use ABAP to meet the requirement.
Regards,
GSL.

Customer master Post code and city field Issue

Similar Messages

Maybe you are looking for