Customization of validation message

Hi,
In one of my crystal report I have a parameter as type date and the property 'allow range values' is set to true .I want to customize the validation error message . Is there any way to achieve this?.Any idea or workaround would be appreciated.
Thanks
Jithu T

The short answer... NO.
You can't customize any part of that control.
If you know what you're doing, you may be able to locate the control dll and modify it but that isn't going to be supported by SAP and would only affect the machine what was modified.
Jason

Similar Messages

How to customize the validation error message

Hi,
In my infopath 2010 form, when a required field is skipped, we get a very cryptic error message which is not user friendly. Can anyone please let me know how can i customize this cryptic message with a more user friendly one.
many thanks.

Hello,
There is no straight solution of this problem. You may use data validation rule instead of field validation for validation so you can at least avoid that pop up error message.
Another way is, make field mandatory via code. you can just remove all field validation then check all fields data via code and cancel the submit event.
Another way is, add custom button form for submit, then hide this button until form validation is succeed.
http://blog.parkercomp.com/2009/05/how-to-customize-infopath-error-dialogs.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Customize f:validateLength message

Hi guys,
I got this :
<h:inputText value="#{messageBean.lastName}" id="lastName" required="true">
<f:validateLength maximum="30" minimum="2"/>
</h:inputText>
but the error mesasge come out very ugly like this:
"{1}": Value is shorter than allowable minimum of 2 characters
How can I customize my own message where output message will be like:
Value is too short.
Thanks !!

Sorry I got it solved !
I just add-in
net.sourceforge.myfaces.Email.INVALID = Validation Error
net.sourceforge.myfaces.Email.INVALID_detail = Please enter a valid email-address.
net.sourceforge.myfaces.Equal.INVALID = Validation Error
net.sourceforge.myfaces.Equal.INVALID_detail = Please enter same password..
to the existing Messages.properties file

Customizing EO validation messages

Example use case (JDeveloper 11.1.1.6):
- I have one EO that maps to one VO that is displayed in two different jsff tabs (tab1, tab2).
- The EO has an attribute (say Myint of type oracle.jbo.domain.Number that corresponds to a NUMBER(10,0) db type).
- Myint appears in both tabs, however in tab1 it is referred as"int1" and in tab2 as "int2".
- The attribute has a validation rule (at EO level) based on the corresponding db type (basically requesting that it is an integer).
I read/believe that validation, if possible should be done at EO level (and it makes sense as you define once and reuse in all screens).
Here are my questions:
1) In the 'Edit Validation rule ' pop-up (EO) I can define an error message based on an key from a rb.
In my case, I have a generic message like 'An integer value is required for the 'Myint' field.'
How can I customize the messages for the specific jsff tabs, e.g., get messages like:
An integer value is required for the 'int1' field.'
An integer value is required for the 'int2' field.'
I want to avoid client validation; however I would like to be able also customize my error message. Is there a way to do this?
I know I can pass a expression to the message text, but still this does not really help me.
Now if I cannot do this, does not this limits the usability of EO validation?
2) Is there a way to have ADF create the red box around the erroneous field. In my view this is nice to have as it directly identifies the issue.
Thanks

Hi,
I am using JDev 11g R2 and it has a red box highlighted for any validation failure of attribute (your point#2) but not sure if it's there in your jdev version :)
Coming to your issue,
For EO, it is always the same field irrespective of it coming from vo1 or vo2 and you don't have control of validation messages of vow/vo2 directly on EO however you can achieve your requirement in couple of ways
Option#1. You can have a custom entity level validation (invoke your custom method with what ever message you want to throw)
Option#2: You can create a transient attribute in your EO of String type and update your VO1 and VO2 to add the new transient attribute and always keep that transient attribute with int1 or int2 (based on your VO usage)
and now in your validation error message of attribute you can use place holder to read the value from transient attribute
for e.g. you error message looks like "Please fill the value for field {field}"
and it will populate field in token list in the same editor window, there in field value give it as Attribute name of transient attribute.
Regards,
Ravi Nuka.

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to get UI page validation messages?

Hi,
I have problem regarding Front End validation messages..how to get this
in my project i have a form with some fields
i need to generate small pop up message "already exist" for entering same values for perticular
columns (when click the tab for next column then i need message)
can any body help me..

Community Feedback and Suggestions (Do Not Post Product-Related Questions Here)
Mod: locking.

How to customize an Error Message

Hi Gurus,
Does anyone knows how can I customize the error messages?
In example, I'm getting the "???en.DOBJ.UPDATE_PERMISSION_DENIED???" error message when a user try to change the user details and do not have permission. But I would like to show a friendly message like "You do not have permission to change this object" or something else.
Thanks in advance.

Hi bigboss,
Thank you for your help. But in which format I need to input the error translation in xlWebAdmin.properties? Something like "DOBJ.UPDATE_PERMISSION_DENIED = You do not have permission to update this object" ?
Just to let you know, I need to show more user friendly error messages for OIM default error messages.
Cheers.

ADAPTER.JAVA_EXCEPTION - java.lang.Exception: no valid message format obje

Hi experts,
we have a problem when we call a web service PI (release 7.01 , SP 10), from legacy system : the PI system return this message : ADAPTER.JAVA_EXCEPTION ; - java.lang.Exception: no valid message format object found
For to test this scenario we use soapUI tool.
I tried the URL (... /XISOAPAdapter/HelperServlet?action=FindChannel ...) in IE and got the following response :
<?xml version="1.0"; ?>
- <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>11ccbb96a7f3349c895a005c9bc09cb7</channelID>
<name>CC_Soap_Sender_TestWS</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_..........IDB_DEV</service>
</s:ChannelInfo>
so I think that this service is OK .
Thanks in advance for your help,
Alberto

Hi,
1) Check the URL once again- check for the extra spaces at the end of the link.
2) please refer below blog i hope it will help you
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4?QuickLink=index&overridelayout=true
Did you check the page no 14 of the document which has the same problem - in problem analysis it has mentioned that check the URL as well as proxy setting of internet browser.
3) Try to create the ID objects manually (Sender Channel and Sender Agreement).....when we use the wizard a * gets introduced in the unfilled (unused) fields (party etc) ....however when manually created the unused fields are left blank.
4) Check if all the ID objects are available in SXI_CACHE.
regards,
ganesh.

How to set a dynamic validation message in javascript

Hi,
I am using the "validate" event on a field, along with the "script message" field, to make a validation and send a message to the user if the test fails.
- Is it possible to define parameters in this message, for example "field &1 is invalid" where we replace &1 by the name of a field?
- Is it possible to send 2 different messages (I guess it's like using a message &1)?
- What is the best practice according to your experience?
Notes:
- I am aware of the xfa.host.messageBox, but I'd like to keep Adobe logic for validations (am I wrong? why?)
- I also saw the possibility of binding a field from the context, to the message field, but I found that it was not very clean to do this way (if even possible)
Thx !

According to the tests I did since yesterday, it is very difficult to use the "validation script message" (in the "value" tab of a "text input" field, within a dynamic table), for sending a dynamic message.
I abandon, and prefer to use use
xfa.host.messageBox( "dynamic message text" )
For information, I could change the message during "validate" event, with a rather complex algorithm.
Unfortunately, when a table row is just added (dynamically, with a button), though the message has been changed, it displays the original value. When I change the field again, the changed validation message is taken into account. I don't know why.
Edited by: Sandra Rossi on Jul 24, 2009 9:01 AM : it's only to say that since then, this was the only solution! Question closed

Variable in the validation message

Dear all,
I have defined a new validation method with the following settings in the SEM-BCS:
Type of the data stream: totals records
Validation type: data rows and totaled
Then I have defined a new validation rule and a new message. For example:
Validation rule:
VAL_YTD u201E&1u201D ( u201CAu201D items ) = 0
Message:
u201CAu201D items (&1) donu2019t equal 0.
I use the group function with item.
My question:
How can I set up that in the message text that the system writes out the number of item in the message?
For example
u201C112u201D item (56 EURO) donu2019t equal 0.
Regards
Zsolt

Hi Zsolt,
I have struggled with this in the past and found the help document useful but I think it is not possible to list the incorrect Item (as suggested above by Collet).
NB If you have BCS 6.02 or greater, then you already have the new "jump to" functionality that can take users directly to the List of Totals records to display the incorrect data record - this provides some help for users and infact may be better because they would probably go to the Totals List after a validation message anyway.
NB It doesn't need any configuration, only installation of 6.02 (that is BCS 6, EHP2) or greater, plus (if you haven't already) activation of the EHP2 group close function in T-Code SFW5. Then the functionality will exist in your validation log screen after running the validation task.

Losing Data Validation Messages when writing back to context

( The base for this question is the ALV grid in section 2 of this [TimeSheetMockUp|http://www.duke.edu/~michaelm/TimeCard/AnnotatedTimeSheet.jpg] )
Users enter values in the white cells which represent the hours recorded on a given day for a certain type of time.
Lets say we have a z-object that supplies us with the overall grid structure, including the headers and (the shaded) summarization cells. The web dynpro ALV had been set to allow input only on the raw data cells. They are set to 4 places with one decimal.
As the app was being developed, when we entered invalid data in a cell, such as 123456, or 1.2345 or u2018qu2019, a nice message was displayed that told the us about the issue. This was free u2013 I guess the phase model does that for us, and we liked it.
Well, down the road a pieceu2026 we needed to add a method to recalc all the summary values from the raw inputs.
METHOD wddoafteraction .
* wizard: navigate to and get the rows data                         *
DATA lo_nd_nd_rows TYPE REF TO if_wd_context_node.
DATA lt_nd_rows TYPE wd_this->elements_nd_rows.
* navigate from <CONTEXT> to <ND_ROWS> via lead selection
lo_nd_nd_rows = wd_context->get_child_node( name = wd_this->wdctx_nd_rows ).
lo_nd_nd_rows->get_static_attributes_table( IMPORTING table = lt_nd_rows ).
* do the math                                                       *
DATA lt_updated_rows TYPE wd_this->elements_nd_rows.
CALL METHOD wd_assist->o_wc->recalc_update_and_return_wrows
    EXPORTING
      im_rows = lt_nd_rows
    IMPORTING
      ex_rows = lt_updated_rows.
* repopulate the rows                                      *
lo_nd_nd_rows->bind_table( new_items = lt_updated_rows set_initial_elements = abap_true ).
Now, weu2019re losing all the nice data validation messages u2013 they do not display (the offending entries are just cleared) !!!
After some investigation, it seems that the bind_table call is where they get lost (without that call, they appear) .
Iu2019ve tried placing this code in a number of hook methods, but the same thing occurs. It is currently in the viewu2019s afteraction hook.
So, u2026 I have two questions.
u2022     How do I get my nice messages back. ?
u2022      Where is the right place to update my context from
( Btw, downstream, our recalc outines will also want to throw messages that we will want processed after we get through the initial validation )
Thanksu2026
u2026Mike

Fixed with SAP Note 1410122 - WD ABAP ALV: Messages are not displayed

Validation messages in JSF (when not using ADF faces)

I've spent some time with JDeveloper 11 and would like to use it on an upcoming project. I have to target IE 6, so I won't be able to take advantage of ADF Faces. Instead I'd like to use the ADF Business Components with a standard JSF interface so it can be used by people still running IE 6.
I've created a Business Component from a database table and can bind a JSF HTML Creation Form by dragging the appropriate view from the AppModule in the Data Controls pane. However, when I attempt to submit the page without all the fields being valid I get the following validation error message:
j_id__ctru2:j_id__ctru6: Validation Error: Value is required. j_id__ctru2:j_id__ctru6: Validation Error: Value is required.
I've tried making this more descriptive, but editing the error message in the Validation Rules section of the Business Component has no effect. What's the best way to convey a meaningful validation message to the user when not using ADF Faces?
Also - I'm still very new to JDeveloper. Since I won't be able to rely on my users having Internet Explorer 7, would you recommend I stay with JDeveloper 10? The examples and documentation I've seen so far for JDeveloper 11 appear heavily biased towards using ADF Faces so I'm starting to wonder how much support is there for using plain old JSF.
Thanks for your time!

Hi,
if you are completely new to this then I suggest to use JDeveloper 10.1.3 and ADF Faces in there. Its good to use with IE6 as well. Currently we do have more tutorials available for this release than for 11, which for this reason is a better choice for someone new to this
Frank

How to display Entity level validation messages in a table

I'm using ADF 11g 11.1.1.2.0. I have a page with an updateable table based on an EO. In the EO I have defined some entity level and attribute level declarative business rules. When the user enters a value in the table that violates an attribute level validation, the related message is displayed inline and the attribute is surrounded by a red box. Furthermore the user is not able to place his cursor in a different row. In this way it is clear which row and attribute caused the error. However if the user enters some data that violates an entity level validation, the validation message is displayed as global messages in the message-popup when the business rule is based on a script or a method. This means that the user gets a global message popup, and does not know which row caused the error. Ofcourse we can include the identifying attributes of the row in the error message, but I would like to know if there is another more visual way to communicate to the user which row caused the error.
Edited by: Jonas de Graaff (PSB) on 10-feb-2010 2:51

Hi Chittibabu,
what about using a TreeTable control?
SAPUI5 SDK - Demo Kit
Regards
Tobias

How can i change validator Messages

i am newbie in JSFl i just start now
i am making a very simple login application
here i do a validator on text field.
validation message show me as form1:txtid: Validation Error: Value is required.i want to change these message like ID is required.how can i do this??

thanks shakeel bahi.
it is only work for required property. am i right?
how i change message on length validator?
for example minimum length is 2 and maximum is 10
error message show as
for minimum
form1:txtID validation error minmum length 2for maximum
form1:txtID validation error maximum length 10here i want to replace my messages like
User Id length Should be between 2 to 10thanks again for your efforts

Web Form Validation Message Language Setting at Runtime when work in multi lingual environment

Business Catalyst use the default culture language to display web form validation message.
When we are in multi lingual environment and not using subdoamin to handle multilingual sites, we found that the validation message did appear in the default culture setting. To make this work, we need to add the below script in our template.
<script type="text/javascript">
$(document).ready(function(){
var head= document.getElementsByTagName('head')[0];
var script= document.createElement('script');
script.src= '/BcJsLang/ValidationFunctions.aspx?lang=FR';
script.charset = 'utf-8';
script.type= 'text/javascript';
head.appendChild(script);
</script>
Assuming the template is in french. You can change the lang parameter in the script according to your language.

After user 1 submits the page, it might not even be committed, so there is no way to have the pending data from user1 seen by user2.
However, we do have a new feature in ADF 11g TP4 that I plan to blog more about called Auto-Refresh view objects. This feature allows a view object instance in a shared application module to refresh its data when it receives the Oracle 11g database change notification that a row that would affect the results of the query has been changed.
The minimum requirements in 11g TP4 to experiment with this feature which I just tested are the following:
1. Must use Database 11g
2. Database must have its COMPATIBLE parameter set to '11.0.0.0.0' at least
3. Set the "AutoRefresh" property of the VO to true (on the Tuning panel)
4. Add an instance of that VO to an application module (e.g. LOVModule)
5. Configure that LOVModule as an application-level shared AM in the project properties
6. Define an LOV based on a view accessor that references the shared AM's VO instance
7. DBA must have performed a 'GRANT CHANGE NOTIFICATION TO YOURUSER'
8. Build an ADF Form for the VO that defined the LOV above and run the web page
9. In SQLPlus, go modify a row of the table on which the shared AM VO is based and commit
When the Database delivers the change notification, the shared AM VO instance will requery itself.
However that notification does not arrive all the way out to the web page, so you won't see the change until the next time you repaint the list.
Perhaps there is some way to take it even farther with the active data feature PaKo mentions, but I'm not familiar enough with that myself to say whether it would work for you hear.

Customization of validation message

Similar Messages

Maybe you are looking for