Customized transaction type not working

In Change Request Management, we have copied a transaction type from "Normal Correction" and tried to customize it. We have also copied a new action profile for this new transaction type. And copied exactly the same action conditions. However, when I trigger action "Set to 'In Development' " and save the change. Status of the message does not change to "In Development" as "Normal Correction" did.
Is there any setting missing that I should do?

Hi Martin,
have you followed the instruction in the IMG, when copying the transaction type?
IMG: SPRO -> Configuration -> Scenario-Specific Settings -> Change Request Management -> Important Information
See copy of the IMG activity below:
IMG ###########################
<i>Important Information</i>
Before you start to configure Change Request Management, make sure that you have performed all the Solution Manager IMG activities under the following nodes:
Solution Manager -> Basic Settings
Solution Manager -> Scenario-Specific Settings -> General Settings
When you copy the standard Change Request Customizing into customer namespace, you should just change the first character to Y or Z e.g. SDCR -> YDCR or ZDCR but not Z1CR, if you change more characters you should be aware that modifications will be necessary and it is not standard SAP. This restriction is required for all CRM related objects like catalog, transaction type, status schema ...
Ruediger

Similar Messages

ABAP Query Execution via Custom Transaction Code - Not working

We have created an ABAP Query in our DEV client and we then created a transaction code to run that query. We have done this because the customer does not want anyone to have access to SQ01, SQ02 in production. This works great in DEV but we can not get it to work in production.
The ABAP Query was exported to our Prod client successfully. I say exported because you do not do direct transports with queries.
We then transported the new transaction code to run the query to production and it was successful.
However, when we run the transaction is production we get a sys dump stating it can not find the query.
We believe the problem is the TRDIR table is missing an entry for the program in production (it has an entry in DEV).
I would have thought that the export on the query would have brought in this entry -but obviously not.
Any suggestions on how we can get this entry into the production client? Did we miss a step on the export that would do this? We want to only bring over this entry - not the entire TRDIR table for obvious reasons (size (1.5 million entries, programs not ready for production, etc.).
Please help!
Thanks.
Scott

Hi,
The above solution will work if you assign the transaction in one server, If you want this will not work in quality/production boxes when transported the query..the program name will not be the same in all the servers...
For this. Do the below:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
     D_SREPOVARI-REPORTTYPE = AQ
     D_SREPOVARI-EXTDREPORT = Name of the Query
     D_SREPOVARI-REPORT = User Group
Save the transaction..Now if the program is generated with different names in the quality/proudction, this will still work..
Regards
Vijay Hebbal

Custom Process Types not working in SAP BPC 10.0

Hi Experts,
We have migrated from SAP BPC 7.5 NW to SAP BPC 10.0 NW.
We have three Custom Process Types created in BPC 7.5NW using the super class CL_UJD_SIMPLE_ACTOR as super class.
It has been made Obsolete and Final class in BPC 10.0NW and the Custom Process types are not running as expected.
Can you please suggest if there is any alternative for using the existing custom process types? Or do we have any alternative for creating custom process types?
*Note: We have tried replacing the superclass with CL_UJD_ACTOR instead of CL_UJD_SIMPLE_ACTOR but of no use.
Regards,
Balraj.

Hi Inl,
The statement looks fine, just confirm:
Your CATEGORY dimension is named CATEGORY? Is it really has property COMPARISOIN?
Can you show the screenshot of UJKT run of script?
What is your core BPC SP?
Vadim

Customized Caption Type Not Working

I'm new to Captivate and I've been trying to create a custom caption background. I'd like a simple blue box to go behind my header text, but for some reason even after following the directions from Adobe, the program is having weird issues. My BMP files are the same size as the samples that come with Captivate, but for some reason the caption style does not "stretch" to go around the text completely. The result is below. I'm just focusing on the header at the moment.
What it's doing:
What I want it to do:

Here's the deal
There are actually two pixels that are significant in this mix. Certainly the pixel in the upper left corner is used as the transparent color. So you might consider creating an image similar to below:
The hot fuschia color would all be rendered as transparent because that is the color of the upper left pixel.
If memory serves, there is another pixel somewhere in the center that is also used in the mix. This happens when the caption is rescaled.
Be sure you make the image small enough so the caption will be as small as you need it. Captions may only be as small in Captivate as the size of the bitmap image you create.
One other tip here. As you are refining the caption, work with a blank project. Tweak the caption and the fcm file, use it in a blank project to test. Need tweaking? Scrap the blank project and start over. This is because once a caption has been used it is cached in the Captivate project file and any changes will usually not be reflected unless you rename the caption!
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Custom Transaction Types, Subject Profiles etc...

Hi all,
Did anyone worked on custom Transaction Type on SDCR?
I know that this is CRM specific stuff to configure, but want to check what are the implications in modifying exisiting SDCR.. Well, in the meanwhile, we need to work on custom Code Groups, Subject Profiles etc..
What is the impact on upgrades if we modify the SAP defined Transaction Types SDCR?
Please correct me if I am wrong in my approach.
Response is greately appreciated.
Regards,
Mike.

Thanks for response.
I tried to copy and modify the subject profiles, catalogs etc. I could able to create Change Request with the custom transaction type, but not able to authorize the change request. And I am using SAP defined action profile for custom transaction type.
And also little bit confused how to attach the custom change request to support message (we need to select the action item "create change document"). It seems there are lot of modifications to be done all the way from support message to urgent/normal correction.
Please advice.
Regards,
Mike.

Service Request - Transaction type not appearing in IC Webclient Pop-Up

Hi,
The service request transaction types SMRQ and YMRQ do not appear in the webclient pop up when i click on Create Service Request.
All the other transaction types are working fine.
I have checked the entries in --> SPRO--> Solution Manager --> Capabilities --> IT Service Management --> Transactions --> Specify several transaction Types.
The entries are SERVICE_REQUEST_TYPE / Seq No 1 / Field Value YMRQ
Please find attached the 2 snips of error message.
Thanks,
Ritesh

Hi Ritesh,
Can you check,
First with SAP all access so that we can rule out this
second check if you have below setting in wizard or confirm in transaction type in SPRO i.e. channel CRM UI
also these are active
Thanks
Prakhar

Standard Memo Lines read account from Transaction type not from memo accoun

Standard Memo Lines read account from Transaction type not from memo account
Is There Away To Readed From Memo lines account
Facts:
Define New Standard Memo Lines with Name "Discounts"
With Type: Line
Revenue Account: 01.0.000.0000.000.411001.0000
Active Date: 01-JAN-2007
When I create transaction with class Invoice
I select the transaction type, and select customer
I press on line items button
I open the list description I select the "discount" define as memo line, I save the transactions
I press on the Complete Button
After that I navigate to Distributions button
I found the account affect not read from account define for memo lines. It read from revenue account define in transaction type
Especially when I use memo lines, how to read revenue account from account assign to memo lines not from transaction type

Standard Memo Lines read account from Transaction
type not from memo account
Is There Away To Readed From Memo lines account
Facts:
Define New Standard Memo Lines with Name "Discounts"
With Type: Line
Revenue Account: 01.0.000.0000.000.411001.0000
Active Date: 01-JAN-2007
When I create transaction with class Invoice
I select the transaction type, and select customer
I press on line items button
I open the list description I select the "discount"
define as memo line, I save the transactions
I press on the Complete Button
After that I navigate to Distributions button
I found the account affect not read from account
define for memo lines. It read from revenue account
define in transaction type
Especially when I use memo lines, how to read revenue
account from account assign to memo lines not from
transaction typeHi,
In my opinion, we need to set up AUTOACCOUNTING for 'REVENUE' as standard lines so that system picks up Revenue account from Standard memo lines instead of Transaction type.
Regards,
Sreenivas

URGENT iRecruitment - AME Custom Transaction Type

Hi All..
We have a requirement to send Vacancy Approval Notifications to Manager's Supervisor
( Say X is the Manager we specify while creating the Vacancy. System should send Approval Notification to X's Supervisor ).
1 I built a Custom Transaction Type with Dynamic Approver Group using the following Query
SELECT DISTINCT 'PERSON_ID:'||ppl.person_id
FROM apps.per_all_people_f ppl,
apps.per_assignments_f asg,
apps.per_all_vacancies vac
WHERE (vac.requisition_id = :transactionId)
AND (asg.person_id = vac.manager_id AND ppl.person_id = asg.supervisor_id)
2. Changed the Profile option "IRC" Vacancy Approval Transation Type" with the Custom Transaction Type ID.
Note: Test Workbench in AME is not showing any Approvers
3. When i create a NEW Vacancy. The System is selecting the default Approver ( which is Supervisory based ) . It is considering the Supervisor based on the USER ID we use it for creating the vacancy and sending the Approval. NOT using the Manager ID. !
My Question is
1. Is the Query Specified above correct as per requirement ? or am i missing something
2. How does the system consider the custom trasanction type for creating the list of Approvers. ( other than Profile option "IRC: Vacancy Approval Transaction Type""
Please Note: I did not use any Attribute or Conditions in the Custom Transasction Type. 'cause the business requriement is very straight forward.
Please Guide me through.
Thanks and Regards
Sheera

Santosh,
SAP do not support the copying of transaction types from SDHF to anything other than ZDHF or YDHF ie within the customer namespace. In order to do that you need to use the copy function from SOLMAN_SETUP -> IT Service Management -> ChaRM -> Copy Transaction Types or transaction AI_CRM_CPY_PTYPE_WEB. The procedure is documented in section 2.3 in the 'Change Request Management - Configuration and Upgrade Guide' available on the Marketplace http://service.sap.com/~sapidb/011000358700001056012011E.PDF.
I would follow that procedure first with a supported transaction type name and that may resolve your problem.
Regards,
Ciará

Error: 'Transaction type not possible (no affiliated company specified)'

Hello,
I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN
It get the error message: 'Transaction type not possible (no affiliated company specified)'.
I could go to AO76 to mark the 'post to affiliated company'.
How can I check which transaction type it uses? With the transactio type group? Or something else...?
Regards,
Pamela

Hello,
actually, the problem lies with the transfer of assets under construction to low value assets with are happening in the CURRENT year, and not the previous year. AuC to LVA transfers from previous years are allowed, but not the one in the current year. Because it uses a different transfer transaction type... The transfer variant 4 (= transfer within company code) is the correct one I assume.
Regards,
Pamela

Message no. AK005 - Asset is investment measure, transaction type not allow

Dear All,
I am getting following error while transfering Investment AuC to Main Asset.
Message no. AK005 - Asset is investment measure, transaction type not allow
I searched the Forum and got some input.., but in that I have a clarification.
Please see my doubt and the forum input.
Internal Order as Investment Measure:
Can you explain me Step 10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88 once again.
How we can give the Receiver Main Asset master in KO88. In KO88 we can only provide the Internal Order. But that Internal Order is already settled to AuC in Step 8.
Please guide me.
Thanks.
Regards,
nms
Re: Settlement of cost center to final asset ?
Posted: Oct 27, 2009 11:40 AM
Hi,
Are you doing any settlement using the AUC asset ?
Normal practice is to Create an Auc Asset and settle cost to Auc. Once the asset is ready for use, finally settle the Auc to final asset.
This can be done in two ways like - line item settlement / investment measure.
Below are steps in two scenarios :
Internal Order as Investment Measure:
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
c. Planning Profile - OKOS
d. Budget Profile - OKOB
6. Create an Internal Order - KO01
a. With the Investment Profile (Step-2)
b. AuC automatically created by the system using Asset Class given in the Investment Profile
7. Post the amounts to IO - FB01
8. Settle the amounts to AuC from IO (Prcg type: Automatic) - KO88
9. Create the Main Asset - AS01
10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88
AuC using Line Item Settlement:
1. Define the AuC Asset Class (with Line Item Settlement) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Order Type (Overhead) - KOT2
4. Create an AuC-Asset (using Step-1 Asset Class) - AS01
5. Create an Internal Order - KO01
a. Assign the AuC u2013 Asset in Settlement Rule in IO
6. Post the amounts to IO - FB01
7. Settle the amounts to AuC from IO - KO88
8. Create Main Asset (using Step-2 Asset Class) - AS01
9. Assign the Main Asset in IO (Step-5) - KO02
10. Settlement AuC u2013 Line Item List - AIAB
11. Settlement AuC - Receiver - AIBU
VVR

nms,
Your message is not very clear - while you have mentioned at what stage are you getting the above-mentioned error message, you haven't mentioned exactly what you were trying to do. The fact that you are getting this error is a straight-forward indication that you are attempting to do something that SAP does expect.
However, answering your query about how to use KO88, you have to settle the AuC to a FA (fixed asset, with asset class other than AuC ), as that will close the open AuC, transfer the value from the AuC to the FA and from this point onwards, all transactions will happen to this FA. Your statement "in KO88, we can only provide the Internal Order" is incorrect.
Hope this helps.
Regards
Gulshan

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

Safari 5.1 customized keyboard shortcut not working

I've just updated safari on snow leopard and my customized keyboard shortcut: go to next/previous panel (ctrl -> and ctrl <-) don't work anymore even if i set them in my system preferences

I'm also experiencing issues with custom keyboard shortcuts not working after the update to Safari 5.1. I had no problems with the previous version of Safari.... I wish I had not updated.

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

IRecruitment Notification Approvals AME Transaction Type not being triggerd

Hi,
We are trying to customize iRecruitment Notification Approvals AME Transaction Type for our requirement of sending customized notification to recruiters and employees whilst doing any application status.
But for some reason AME is not triggered.
I have verified that the profile "IRC: Notifications AME Transaction Type" is approrpiately set at Site level; with value being "IRCNTFAPPROVALS". Does anyone know if any other setup needs to be done for AME to be triggered for this particular transaction type to be kicked off.
Working on R12, 12.1.3 version.
Any suggestions, if any one has faced a similar issue or any guidance?
Thanks

Similar issue for me too. Kindly update

Custom rendering extensions not working in SSRS Report Designer (rsreportdesigner.config)

My custom rendering extension is working in Report Builder (in RSReportServer.config), but not in Report Designer (in RSReportDesigner.config): instead of adding a "TXT" export option, it's just adding a duplicate "CSV" option.
SUMMARY:
Is there a way to get these features working, with Report Designer?
DETAILS:
We are running SSRS (Reporting Services) under SQL Server 2008 R2.
Here's my rendering section:
    <Render>
      <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering" />
      <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering" />
      
      <Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TXT(ASCII,NoColHds)</Name>
       </OverrideNames>
       <Configuration>
          <DeviceInfo>
              <FileExtension>txt</FileExtension>
               <FieldDelimiter>,</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <NoHeader>true</NoHeader>
           </DeviceInfo>
       </Configuration>
      </Extension>
      <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering" />
      <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering" />
      <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" />
      <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering" />
      <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" />
      <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering" />
      <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering" />
    </Render>
When I add the above "TXT" section to RSReportServer.config, then Report Builder (and production) both show an export option "TXT(ASCII,NoColHds)".
But when I add this "TXT" section to RSReportDesigner.config, and then (in Report Designer / BIDS) attempt to export from a "Preview" of the report, the export drop-down does not show a "CSV" option followed by a "TXT"
option, but instead shows the "CSV" option twice.
This simply limits testing of the export option, to Report Builder... or requires any reports be published from Report Designer before they can be tested with
this export option.
(FYI, why this export option: compliance in our industry requires sending data to government agencies, in text files, with fixed-length columns, and ASCII encoding. Also, we're attempting to give the production of these files to the *users* managing
communication with those agencies... so we're putting them into SSRS.
I worked around the fixed length columns (and no delimiters -- no commas), by writing a version of the report where all string columns are padded, and all columns are concatenated, to form ONE LONG COLUMN... but Reporting Services' CSV export format produces
a Unicode file (UTF-8, which the agency rejected, because it had a leading "ï»¿", or "EF BB BF" in hex), whereas the agency requires an ASCII file.)

Hi Doug_atMidway,
According to your description, you want to enable your custom render extension. Right?
In Reporting Services, if you want to deploy the custom extension, you just need to add the extension into rsreportserver.config file. The
RSReportDesigner.config file stores settings about the rendering extensions available to Report Designer. Since you still use the csv rendering extension in your assembly, we don't need to do any modification in rsreportdesigner.config file. Pleaes
refer to the links below:
Thanks for attempting to help, Simon.
As my question states, I've *already done* both the above: changed (1) rsreportserver.config and (2) rsreportdesigner.config. I added the same code, shown above, to both files. I did that so I could see the new "txt" extension
both (1) when exporting in production and Report Builder, and (2) when exporting in Report Designer's "preview".
The change in (2) is not working: I do not see the "TXT" extension in Report Designer, when I try to export from a preview. Instead, Report Designer shows the CSV extension repeated.
Thanks for the docs. I consulted them (well, I consulted the EQUIVALENT pages, for SQL Server 2008 R2), when creating my block of code above.
Do you see anything to correct, in my code?
Are the features I'm using actually working, with rsreportdesigner.config?
Thanks again,
-- Doug

Customized transaction type not working

Similar Messages

Maybe you are looking for