Customized web page for web authentication.

Hi,
can any one share a working "customized webpage for web authenticaiton", Virtual IP address of the WLC is 5.5.5.5.
Thanks.

Hi Nagesh,
Here's a great download which contains sample templates of each possible type of Web Policy on the WLC:
http://www.cisco.com/cisco/software/cart.html?imageGuId=7A2F6E79BAE4EFF389E1FA95D96936027AD30AE8
Best,
Drew

Similar Messages

  • I want to give custome error page in web dynpro application

    Hi ,
    I want to give custom error page for time out condition in my web dynpro application  .
    Kindly give me a soulation ASAP.
    Thank's and regard's.
    Vikash.

    Refer this :
    default error page
    May be it helps you.

  • HT201317 How do I create a web page for my slideshow?

    I created a slideshow.  I exported it, so now it is in my iTunes...and where else, I admit I do not know.  When I exported it, I didn't understand where I was exporting TO.
    Anyway, I know I saw somewhere that I can create a web page for my slideshow that will allow my family to come (by invitation) to view the slideshow.
    How do I do this?
    Any help will be appreciated since I spent about 12 hours putting this show together and now would like to share it with my family.
    Thanks!
    peace.

    That's done with iPhoto in creating a Shared Photo Stream with the video. The slideshow must be in iPhoto. Then follow the steps in this screenshot:
    OT

  • Do Web pages for phones have to be Apps?

    I do not own a mobile phone that is web enabled, and I never designed a web page for phones, but now due to the steep learning curve, I need a quick fix.
    Reading the help in Dreamweaver 5.5, there is lots of information about creating the best  mobile sites, though at the moment, I don't understand a lot of it - but that's my fault.
    However, when I use someone else's phone to look at most existing sites that are just designed for computers to view, the phone has facilities that make the sites available.
    Lots of zooming and such which is a pain, but you usually can view them.
    It occurred to me that perhaps there is a position mid way between a stock web site and a fully fledged phone app could be a stop gap solution until the whole mess of media queries, and other phone related stuff is understood.
    My suggested solution is as follows:
    Provide seperate sets of pages for both types at suitable sizes ( max 320 wide for mobiles).
    Keep all graphics for phone pages to a minimum size and well optimised to allow for quick page loading.
    1.On the index page of the site, put a large link to the phone pages and one to the computer pages so that its easily seen by phone users
    2. Design the index page and all phone pages so that the content would fit on a 320 pixel wide screen.
    3. Have the first page after the index purely as the menu screen, with a list of links.
    4. Each link leads to a deck of stacked pages that that are serially linked back and forth, with a "return to first page" on each one, with the navigation being at the bottom (or the top?) of the page.
    To view pages, the phone user would have to select the phone link on the site's index page, then select from the menu to get to the first page of a topic. He can then flick through the linked set of pages and go back to the menu from any. The pages would fit most mobile phones, and no phone specific stuff wopuld be needed.
    I appreciate that this method would not provide the most sparkling of mobile web sites, and would require two sets of pages, which is a maintenance problem, but it ought to help phone users to surf my site until I can get up to speed with the mobile stuff.
    Question is - would it work?
    Your comments please?
    Howard Walker

    mhollis55 wrote:
    Frankly, if you simply do a website using HTML5, you're set for a mobile device. And Dreamweaver 5 and 5.5 both give you code-hinting and definitions for HTML5/CSS3.
    jQuery would be the "app" side of that, though if you are really looking to make an application that works on a mobile phone, your best method is to do it in Flash and then compile it using Air. Adobe has a complete discussion of what's required here.
    Hi mhollis55
    Could you tell me why you describe the jQuery mobile framework as an app?
    The framework uses html5, css3 and ARIA, and is designed to make the creation of mobile friendly web pages easier for those who do not wish to commit themselves to learning all the mobile specific features required by modern smartphones and now even supports many of the older smartphone devices, see - http://jquerymobile.com/
    PZ

  • Making a blackberry web page for my business

    Can I make a blackberry web page for my business off of my 8330 or do I have to use a desk top version of the internet to make a web page? I would really like it if all things that are capable on a desk top were allso capable on my 8330.If anyone knows if this is possible let me know.

    All things are not possible on a the BB that possible on a PC. That is why it is a mobile device, and not a PC. Something just require a PC. The BlackBerry doesn't replace a PC totally.
    I don't know of any web editing applications used on the BB. There could be, i might have missed it, but I really don't think so.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Archive Web Page for Off Line Use

    Hi all,
    I'm currently enrolled in an online music program where I have to review/study web pages for my course instruction. These pages contain standard HTML text, graphics, mp3s, multiple flash applications and quite often embedded quick time movies. To date to back these pages up I have physically printed each page and then discretely downloaded and saved all mp3s, flashes, and quick time movies. However, as I'm sure you can guess, this leads to a very disjointed "archive" of paper product, separate quick time movies, and flash applications. So here's the question:
    Is anyone aware of an archive utility that will save a web page like above in it's entirety onto my mac for off line use? I have seen a few web archive tools like I'm looking for, but all appear to be for Windows or older versions of mac OS. So any direction would be much appreciated.
    Thanks,
    Rick.

    Hi
    Welcome to Apple Discussions
    Give this utility a try. The way this works. After you install the app. in your Applications folder, open it. A panel appears.
    Then go back to Safari. Open the web page you want to archive. File>Save As. When the panel opens make sure the drop down menu is set to "Web Archive". Then go to the location where you saved that page. Move the web archive file onto the Utility's panel. This will create a folder with the various web components for that web site.
    Also, either update your tag to your current version of OS X Leopard, or if 10.5.2 is correct, consider upgrading to 10.5.5 via Software Update.
    Message was edited by: Hawaiian_Starman

  • Firefox 8.0 will not load web pages for multiple Windows XP users

    We're running Windows XP 5.1 SP3 with two user accounts. After upgrading to Firefox 8.0, Firefox will no longer load web pages for the second user when the first user is logged in and running Firefox. (We typically use "Switch User" as opposed to logging out when taking turns at the computer.)

    I guess that was a possibility
    I gave up on version 8
    I uninstalled it, googled version 7 and installed that and now it runs fine when I switch user to user
    Thanks for the help I'll take it into consideration if I update again

  • Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?

    Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?
    == This happened ==
    Every time Firefox opened
    == Today

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • How to set custom master page for sharepoint application page ?

    Hello,
    I need to apply custom master page for the custom application page I created for login purpose.
    Can anyone please let me know how to apply master page for custom application page ?
    Note : I need to set custom master page for application page at web application level.
    thanks,
    Dipti Chhatrapati

    Hi Dipti,
    You can use the same reference as ASP.NET
    Example
    "<%@ Page Language="C#" masterpagefile="../_catalogs/masterpage/minimal.master" title="teste" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" meta:webpartpageexpansion="full"
    meta:progid="SharePoint.WebPartPage.Document" %>"
    You can use SharePoint Designer 2010
    http://www.microsoft.com/download/en/details.aspx?id=16573 to make the reference from you aspx page to you custom masterpage.
    When you are editing a aspx page you can go to ribbon "Style" and attach the custom Masterpage.
    André Lage Microsoft SharePoint, CRM Consultant
    Blog:http://aaclage.blogspot.com
    Codeplex:http://spupload.codeplex.com/http://simplecamlsearch.codeplex.com/

  • Apply custom master page for a new sub site in programming

    Hi;
    How Apply a custom master page for a new subsite ?
    My code is as follows but it not working : the master page is not applied ?
    SPWeb newSite = web.Webs.Add(name, name, name, Convert.ToUInt16(1036), "{815BF557-AFE0-42B4-92A1-A8A56011EDBF}#LaPoste.DTC.ModeleSite", false, false);
    newSite.AllProperties["__InheritsCustomMasterUrl"] = "False";
    newSite.CustomMasterUrl = "/_catalogs/masterpage/iDtc/iDtcGeneric.master";
    newSite.AllowUnsafeUpdates = true;
    newSite.Update();
    Regards

    try this:
    foreach (SPWeb site in siteCollection.AllWebs) {
    if (site.Title.ToString() == "Reporting Portal")
    site.MasterUrl = WebAppRelativePath + "_catalogs/masterpage/Branding101.master";
    //site.CustomMasterUrl = WebAppRelativePath + "_catalogs/masterpage/Branding101.master";
    site.AlternateCssUrl = WebAppRelativePath + "Style%20Library/Branding101/Styles.css";
    site.SiteLogoUrl = WebAppRelativePath + "Style%20Library/Branding101/Images/Logo.gif";
    site.UIVersion = 4;
    site.UIVersionConfigurationEnabled = false;
    site.Update();

  • How to set custom master page for social/sites.aspx in sharepoint 2013

    How to set custom master page for social/sites.aspx in sharepoint 2013.?
    File path is
    C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\SocialDataStore\SocialDataStoreList\sites.aspx
    Thanks in advance

    Hi,
    You could open the sites.aspx in Notepad or SharePoint designer, and set the master page to your own master page directly via editing:
    <%@ Page language="C#" MasterPageFile="~masterurl/custom.master"      Inherits="Microsoft.SharePoint.Portal.WebControls.FollowedContentWebPartPage,Microsoft.SharePoint.Portal,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
    %>
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Add Portal iView to Web Page in Web Page Composer

    I would like to add a Portal iView to a web page using Web Page Composer.  What are the steps to be able to do this?
    We are using NetWeaver 2004s with SP16.
    Thank you for your assistance.
    Alex

    Hi Le,
    I configured a Global Entry Point.  These are the steps:
    1.  Choose System Administration ® System Configuration ® Knowledge Management ® Content Management ® User Interface ® (Show Advanced Options) ® Mapping ® Component
    2.  Edit the wpcDragExplorerEntryPoints configuration object.
    In the Parameters field, you can enter the following properties:
    Property:  displaymode
    Description:  Specify select
    Property:  maxproviderprio
    Description:  Enter a value for the highest priority number that standard entry points can have and still be displayed in the Web content browser The priority of standard entry points is between 3 and 80. For a list of standard entry points and their priorities, see the configuration at Content Management ® Repository Managers ® Entry Point Providers ® Entry Point Provider.
    Property:  entriesperrow
    Description:  Number of entry points displayed in each row (default: 5)
    Property:  entrypointsprefix
    Description:  Prefix of the entry point repository.  If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.  Default: /entrypoints
    Property:  sharedcontent
    Description:  Semicolon-separated list of paths to be displayed as global entry points for shared content
    Example of a complete specification in the Parameter field:
    displaymode=select,maxproviderprio=30,entriesperrow=5,sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder
    Alex Zelinski

  • Web Page using Web Apache

    I am looking for good instructions on how to create web pages with Web Apache site that is included with Mac. Is it possible to publish to webApache and iWeb?

    These pages should help:
    - Apple Web Sharing: http://www.apple.com/macosx/features/websharing/
    - MacDevCenter Web Sharing Collection:
    http://www.macdevcenter.com/pub/a/mac/collections/webserving.html
    - Apache Manual: http://home.stat.ucla.edu/manual/
    - Mac OS X Web Sharing: http://home.stat.ucla.edu/~deleeuw/
    - Macworld Apache Secrets: http://www.macworld.com/2001/08/bc/howtoosxsecrets08/
    Please note that Apache isn't a real web domain. It just hosts pages for other people on your network to see. Youe web URL in Apache would be something like http://192.168.1.3/~chris/. "192.168.1.3" being your IP Address and "chris" being your short user name.
    Indragie

  • How to insert a Web Page in other Web Page in Web Page Composer

    Hi,
    I´m trying to insert a Web Page in a contaner of other web page in web page composer. I allready allow all web content types that´s make some reference of web pages in properties of my container (page, wpc_page, ...)
    After that i select a web page and drop in my container the page reload but the container still empty :/
    Thanks
    Leo

    No!
    Don't you pay attention to what fruhulda says?
    Peter

  • Error in configuring Custom Error Pages for Faces Portlets

    According to
    http://e-docs.bea.com/wls/docs92/schemaref/controls-netuix/http.www.bea.com.servers.netuix.xsd.controls.netuix.1.0.0/element/facescontent.html
    you can specify an errorUri attribute on the facesContent object for the error page.
    <netuix:facesContent contentUri="/testList.jsp" errorUri="/error.jsp"/>
    WebLogic Workshop even allows setting this in the tool.
    However, the errorUri never gets picked up and the following error shows up.
    <BEA-423266> <No setter for property :: errorUri.>
    Anyone faced this problem. Is there any other alternative to specify a custom error page for JSF portlets.
    Please note that the errorUri works fine for the jspContent tag used for JSP Portlets.

    Hi Sanjeev,
    You need to check if you have access to AXF_CONFIGS table. Check if you have ran GRANT_ACCESS.sql script which has below grant commands.
    grant execute any type to apps;
    grant create type to AXF;
    grant select on AXF.AXF_CONFIGS to apps;
    v_formId AXF_CONFIGS.FORMID%TYPE; means tableName.columnName%type;
    so looks like when you are running AXF_EBS_SOLUTION_DATA.sql you are not able to access AXF_CONFIGS table.
    Hope this helps.
    Regards,
    Amol Gavali.

Maybe you are looking for