Customizing changes transfer to another client automatically

Hi,
In our development system, client 100 is for customizing, and no applicaiton data, client 200 for testing, with application data.
When we made the customizing changes in client 100, I should transfer the changes to client 200 with SCC1, and then do the testing in client 200.
How can I do the configuration, when I made the changes in client 100, the changes will be transferred to client 200 automatically?
Thanks in advance,
Best regards,
Randy

Hi,
Check SAP  Note 398589 - TMS_BCI_START_SERVICE has no selection screens
Also check this [link|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/automatic-transport-from-a-client-to-another-942355]
Thanks
Sunny

Similar Messages

  • How can i transfer the 'Authorization Group'(SE54) to another client?

    In project i must define an 'Authorization Group' in T-Code SE54---The 3rd radiobutton.
    But there is no message to me to entry the Request NO.?
    How can i transfer the 'Authorization Group' ?
    I konw the date can be show from view 'V_BRG_54' ,but how to transport the data of the view?
    TKS a millon~~

    Hi,
    If your client is set for automatic recording of changes it should prompt for a transport, check there is not another client where you should make config changes.  If not, the menu option Table View -> Transport will let you assign the Auth group to a transport.
    Regards,
    Nick

  • Transfer master data from a project from one client to another client

    Hi all,
    I have a training client and a production client.  The project master data has been created (Tcode CJ01) in training client with multiple levels and WBS.  Is there a way to transfer the master data from the training client to another client so there will be no need to create the same project in another client?
    Thanks.

    Refer note for 37899 batch input option.
    Though this pertains to older versions with few changes to code it might be suitble to the version you are working on.
    Regards
    Sreenivas

  • Transfer Customization again to another client

    Hi guys,
    I transfered and implemented changes from a 100 client to my 300 client yesterday, but today I want to do the same transfers/implementations from my 300 to my 400 client.
    Can this be done in an easy way or do I have to look up all customization again to transfer them?
    Thank you,
    Filip

    Hello Filip,
    Your customizing changes are contained in transports no?
    Find the transports you want in your client 400 and run transaction SCC1 in the target client with the corresponding transport numbers.
    Let me know if you need further guidance,
    Reward points if useful,
    Joost

  • Transfer data in the Ztable from one client to another client in a same ser

    Hi all,
    How can i transfer or move data in the Ztable from one client to another client in a same server .
    Thanks
    Ajay

    hi,
    create a transport request (Workbench type) and add the following line into the transport request:
    R3TR TABU name_of_table
    save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
    When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
    hope this helps
    ec

  • How to transfer file from one client to another client?

    hello,
    i have some questions and hope you all can help me..thanks a lot first..
    Here are the questions:
    i) How can i send a file from one client to another client using RMI?
    ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
    iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
    iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
    Last, thanks again..

    Your questions reflect some ambiguity in terms.
    "Client" and "server" are commonly used in two different senses:
    1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
    2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
    In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
    So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
    This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
    Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

  • How to transfer data from one client to another client

    Dear Experts,
    Please explain how to transfer data (Materials) from one client to another client?
    Thanks,
    Ajay Kumar

    Hi Ajay,
    Check any of below methods
    Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
    OR
    This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
    Check below threads for more information
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
    http://basissap.blogspot.in/2008/05/what-is-client-copy.html
    OR
    You can download data from one client and upload in another through BDC or LSMW.
    Regards,
    Sharat

  • How do i backup the list of load images automatically exceptions under Options- Content. I want to transfer to another comp without re-adding one at a time

    How do i backup the list of load images automatically exceptions under Options->Content. I want to transfer to another comp without re-adding one at a time. EVen if there is no way to backup, what is the system file for Firefox that stores these, so i can transfer this file or open it in an XML or similar editor to copy them out?

    The permissions.sqlite file stores 'allow' and 'block' exceptions for cookies, images, pop-up windows, and extensions (software) installation.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number

    Hello Apple I work in one of the shops phones in the Kingdom western Saudi Arabia you now restore a backup to the customer by mistake recovered to copy another client now been linked to the phone and ask me to check, I do not know PIN number
    <Edited by Host>

    These are user forums. You are not speaking to Apple here. I'm sorry but we cannot assist you. Contact your Apple vendor in your country. Customer Service: Contacting Apple for support and service - this includes international calling numbers.

  • Query regarding transport of customizing data to another client

    I have some queries related to transport of workbench and Customizing data to another client. As I am new to SDN forum, I am not sure if this is the right forum to post my query. Kindly let me know.

    Frankly, I wasn't even aware of the "Software Logistics" subforum for Netweaver. It is not frequented much, but seems to be the perfect home for questions about the CTS (that are not related to ABAP development at the same time, e.g. object dependencies).
    So, thank you too
    Thomas

  • Customized table transfer(Client 1 to Client 2)(ALE)

    Hi Dear,
    How can i transfer my ZTable from on client to another Client.
    1>I require to create same ZTable in both client?
    2>do i require to user ABAP Program?
    or any other way I can follow.
    plz suggest me the best way.
    and provide docs if possible.
    thanks
    RP

    rp
    you can also have a query in ur program as below:
    SELECT * FROM <table> CLIENT SPECIFIED INTO TABLE lt_tbale
            WHERE <field>l = <condition> AND client = sy-mandt.
    and start processing the data...for update try this:
    UPDATE <table> CLIENT SPECIFIED
    SET <field> = <val> WHERE mandt = sy-mandt
    AND conditions
    and similarily for modify
    i'll also lukinto the other stuf i had pointed out in my prev post. But this wud be relativly easy

  • How to transfer table data from one client to another client?

    How to transfer table data from one client to another client?

    Hi,
    Look at the Blog
    /people/community.user/blog/2007/01/07/transport-table-entries
    Regards
    Sudheer

  • Transfer a table with data from 1 client to another client

    Hi experts please focus on this issue.  what is table maintainance generator? what is the main advantages of it.
    how can we transfer a table with data from 1 client to another client.
    Thanks  in advance
    vamsi.

    Table maintenance generator can be generated via se11 on your table.
    The advantage is that the table can manaully be updated via SM30.
    If you want to transport to another client the table content, I think you can :
    - Generate a transport request in SM30 ( Transport button)
    - use SCC1 to transport from a client to another.
    Regards,
    Erwan

  • How do i make a page to loop instead of changing to another page automatic ?

    Hello,
    I wrote an actionscript website
    The website has a few pages.
    The problem in my site is that after 13 seconds the homepage change
    To another page.
    How can i make the homepage to loop instead of changing to another page automatic?
    My website address is  : http://www.adiys.co.il/hilel_website.html
    (Written in hebrew)
    Thanks very much for your help,
    Menny

    The problem could be one or more from a long list. When you run your movie in Test Movie... do you get any errors? If you are using the timeline, is your first section 13 seconds long? Some of your navigation at the top seems to work, but some doesn't, so it's hard to tell what is supposed to happen.
    It would help a great deal to see the actual .fla file that you are using.

  • Bank master data changes not getting tranported to another client

    Hi all
    While i am making changes to the bank master data, they are not reflected in the transport to another client.
    Please let me know how to do this.
    Thanks
    ES

    Hi
    While creating the house bank , i created the bank master using the create button.
    This was saved in the transport request and moved correctly through the transport.
    Now i find that the description etc. to be changed in FI02. I have done the changes.
    These changes when transported do not get reflected in the new environment.
    Please let me know the reason.
    Thanks & Regards
    ES

Maybe you are looking for

  • Error while encrypting the xml file using asymmetric cipher...pls help

    i am encryption the xml file using asymmetric cyper.... in one class , i am generating private key and public key using "RSA" algorithm..using 1024 byte initialization... it is generating properly... and after that in second class i am encrypting the

  • No marching record found "GL account '

    Dear All, when i am doing AP invoice copy from GRPO then add the AP invoice error is showing no matching record found "GL ACCOUNT". Item is manged by item group evn i check the item group accounting and selection of GL account on ap invoice document.

  • How to use JDK 1.4 and WLS 5.1 on SUN Solaris 5.7

    Hello, I run into trouble after I tried to use the JDK 1.4.1_01- b01 with WLS 5.1 I got the following error message: Exception in thread "main" java.security.AccessControlException: access denied (java.lang.RuntimePermission createSecurityManager) at

  • OOTB Three-State Workflow not funtioning correctly

    I am trying to create a Three-State OOTB Workflow on a document library. I have created an additional column in the document library called "Assigned Document To:". (Type: Person or Group) When I upload the document the workflow instantly assigns the

  • Importing Records to iTunes

    How do I import my record collection into iTunes? I have one of those gadget boxes that takes the audio from the turntable and ports to the audio in on my PC. I don't want to have to take the intermediate step of creating a CD and then importing that