Customizing request

Hi All,
what is the difference between Parent Request and Child Request?
Regards,
Sasmita

Child Request can be considered as the request which actually holds the objects to be transported & resides within Parent Request / Main Request. In T.Code: SE10, we select the appropriate request & expand the same. Now we can see the child request / request holding objects. First we release the Child request & then we release the main request, which is to be imformed to basis consultant along with approval from your project manager to be imported to relevant server.
<b>Transport Request is generated in following scenarios</b>:
1. <b>Customizing Request</b> - When doing or changing some customization.
2. <b>WorkBench Request</b> - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
<b>Development Server</b> - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
<b>Quality Server</b> - Mainly useful for testing.
<b>Production Server</b> Actual / Live server, where the real transactions are created & posted.
Regards,
Rajesh Banka
Reward Points if Helpful.

Similar Messages

  • Releasing Customizing Request

    Hi All,
             I have created a layout in FBL3N in development and saved it as a customizing Request.
    While releasing this request it show an error message
    "8: Transport carried out with errors.
    Individual objects could not be transported successfully"
    How to solve this issue.
    Thanks,
    Bala G

    Dear Markus ,
    Thanks for your reply, I am repeating the same with for clear understanding
    this customizing request created and released, after releasing the request ( carries 5 objects in main task and 2 in Sub task)
    from DEV to PRD , when we opened the same request after importing into PRD we found the main task objects are available but
    the subtask or child task objects are missing, we tried recreating a new task and tried but still not working what is the problem
    Hope this is clear?
    regards
    Praveen

  • How can I re-release the Customizing request

    Hi,
    Yesterday, I released a customizing request to QAS. At the QAS, I used the T-code STMS to check the import request, I could not find out it.
    But, today, I released another customizing request to QAS. I can find out it. I don't known what had happened.
    Could I re-release the CR? How to deal with this question?
    Waiting for answer, THX
    jk

    Dear all,
    Thanks for your time. The problem is still have.
    I have released the Task and Sub-task, and I checked the import queue in which there isn't the TR.
    I released a new customizing request, it can be find out the import queue.
    I think the transport routes maybe have problem at yesterday, so I want to re-transport the customizing request.
    Which method can I choose to do that?
    jk

  • Creating a new job and position prompts customizing request...

    Dear All,
            I created a Job and Position through PP01 transaction. I am facing 2 issues while doing so...
    1. System prompts for Customizing request when i try to save the new entry.
        What table/settings do i need to maintain for turning of the customizing request promptings.
    2. Once i save the entries(after entering some dummy customizing requests), when i check the
        HRP1000 table for the new jobs and positions... The table entry shows 2 records for each Job and     
        position. One entry with Plan version '.:' and another with active Plan version '1'.
        I need to have just one entry in HRP1000 table for each job/position with ACTIVE plan version.
       I checked T77S0 table, it has active plan version maintained against the PLOGI-PLOGI entry.
       Please let me know what table i need to maintain to handle my requirement.
    Regards
    Nanda

    Hi Nanda,
    When you create new job or position in sandbox system it will not ask for the request number,since you generally dont transport the objects from sandbox to test system.
    When you create a new job or position in development system, it will always ask for request number. This is because, in most of the cases, you need to transport the job and position to test system and then to production system.
    Without a customizing request  you wont be able to transport those changes to next system.
    Thanks,
    Supriya.

  • Doubt in customizing request with respect to table entries

    Hi All,
    I have a doubt in customizing request with respect to table entries.
    Suppose I have a customizing request with respect to a table that contains say 10 entries in the development system.
    Now I am transporting this request to the quality system in which the same table contains 20 entries.
    When I am transporting this table from the development system to the quality system, will my 10 entries in the development system get added to the 20 entries in the quality system or will my table get overwritten in the quality system.
    What difference will this be if it is a workbench request ? .
    Regards,
    Sushanth H.S.

    Hello,
    So if we are transporting contents of a table from one system to another, it should always be a customizing request and not a workbench request right.
    If the "Delivery Class" of the table is 'C'(Customizing table, maintenance only by cust., not SAP import) it will ask for a customizing request.
    If it is 'A'(Application table (master and transaction data)), it will ask for Workbench.
    To add to your previous qn, when you transport the entries to subsequent system it will always check the KEY FIELDS and then update. If you see a transport, then the table entries are represented by their key fields.
    If you create new entries in your table and transport, it will add the records. Else it will modify them
    Hope i am clear.
    BR,
    Suhas
    Edited by: Suhas Saha on Jan 23, 2009 11:51 AM

  • Difference between customizing request and workbench request?

    Hi ,
    What is the difference between customizing request and workbench request?
    please reply.........

    HI,
    <b>Workbench Requests</b>
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    <b>Customizing requests</b>
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    pl reward if it helps.
    Thanks
    Sadhu Kishore

  • What is customizing request?

    what is customizing request?
    regards,
    phani.

    Hi Phani..
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    You can see good details on this thread:
    Re: customising and workbench request
    and if you need any extra information just have a look in these
    http://help.sap.com/saphelp_sm40/helpdata/en/b5/90cd3a21873650e10000000a11402f/content.htm
    http://web.mit.edu/ist/org/admincomputing/dev/qa_tr_faq_production.shtml
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/dfba3692dc635ce10000009b38f839/content.htm
    http://www.planetsap.com/cts.htm
    http://www.sapbrain.com/TOOLS/CTS/CTS.html
    If it helps Reward with points
    Regards Rk
    Message was edited by:
            Rk Pasupuleti

  • No customizing request of LBWE gets stored in SE09

    Hi All,
    I have activated master and transaction data sources in RSA5 and corresponding requests are showing in SE09 but once I activate extract structure using  T-code LBWE, It does not ask to save and also no customizing request gets stored in SE09.
    could anyone has soltion to this problem.
    Regards
    Amit Srivastava

    Hi All,
    I have checked all those things but it didn't help me.
    Can you please tell me one thing, if I activated datasouce in LBWE then it should ask for customized request (Correct me if I am write) ?
    In my case, I have actiavted all transactional datsouce in RSA5 and its shows in one workbench request in SE09 but while I am trying to activated those datasource from LBWE it's not asking me any customized request.
    If assume that it's get stores in workbench request, while transporting this request in production, will it cause me error in production?
    Or is there any setting that I am missing?
    Regards,
    Rishit

  • Need Customizing request instead of Workbench for Table Mainetnance

    Hello All,
    I created a ztable with Table Maintenance.
    Whenever I am creating entries using SM30 it is asking workbench request instead of customizing request.
    I need customizing request to be created for table entries.
    Can anybody help me in this regard.

    Hi Eric,
    Thanks a lot!.
    The problem is solved....
    Thank you very much for your help.
    Regards,
    Sunil

  • Regarding customizing request

    Hi,
    I did some modification to existing Org chart in PPOME tcode.
    it was asking for customizing request.i have given wrong customizing request.
    now i want to remove the that customizing request and i want to assign it some other request.
    my question is if i delete the current customizing request number will it going to delete the original record.
    if it won't delete then if the refresh the org chart will it going to ask the customizing request again .
    Please can any one confirm this for deleting the customizing request.
    regards
    paveee

    goto that custmising request.
    click on the objects present in that request.
    Delete the object from that request - Right click on the the object & clicl on delete.
    goto the object again & edit something. it will again prompt for the transport request.
    assign a correct customising request.
    Reward points if helpful

  • About customizing request

    hi,
    what is difference between worbench request an customizing request? can give me sdetails of both?
    thanks in advance
    sudhakar

    Hi
    Check the below links.
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm]
    [Re: difference between requests]
    [Re: customising and workbench request;
    Regards

  • Customizing tables not asking for Customizing Request while saving data

    Hi,
    I have some customizing tables in my development server (Delivery Class = 'C').
    These always used to ask for a Customizing Request whenever data was saved in them.
    Suddenly, I have noticed they are no more asking for any Customizing Request. I cross-checked in the Transport Organizer and confirmed that there are no customizing requests of mine which may be already holding any data entries of these tables.
    I wonder why this may be happening (believe it to be some basis configuration issue. also asked my basis guy but he has no clue).
    Kindly suggest.
    Thanks,
    Z

    Thanks Navneet and Gautham.
    My problem is now solved. Let me summarize the problem and the solution now.
    -> The customization tables suddenly stopped asking for a request while saving data.
        Somehow the settings had been reset, and as Gautham pointed out, it was corrected in the tcode SCC4
    -> Most of the tables now worked fine, but still few of them didnt ask for requests
        Here, I found out that the developers had chosen "no, or user, recording routine" instead of  "standard recording routine". For such tables, when i check in the tcode SE54, menu path Environment -> Maintenance Objects -> Change, I find the Transport category 'No Transport'. Regenerating the maintenance generator choosing "standard recording routine" fixes this and the tables now ask for a customizing request.
    Thanks, both, for the quick response.

  • Customizing request and Workbench request

    Can some one clarify me the difference elaborately
    Thanks
    Krishna

    Hi Krishna
    Changes to cross-client Customizing objects and to Repository objects are recorded in Workbench requests
    In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
    Changes to client-specific Customizing objects are recorded in Customizing requests.
    Customer customized data designed for a specific client is transported to another client using customizing request. Most of the cases these requests are something like changing values in tables (that too client specific).
    Hope it helps
    regards
    Srinivas

  • Customizing Request Application Flows in OIM 11g?

    To all:
    I'm trying to work through a scenario using Request Templates - I'm not sure that this approach is possible using configuration approaches and wanted to see if anyone has any useful feedback. First, let me describe the problem I'm attempting to solve:
    - The users who will be using self-service will be somewhat restricted on what they can do: basically, once they have an account in OIM (this is 'automatic' from a reconciliation - there's no self-registration or user creation) they can request access to a small number of applications.
    The ideal flow that we would like to follow is:
    Step 1: Log in to OIM.
    Step 2: Create Request
    Step 3: Select the Application for requested access and the requested role.
    Step 4: Enter an effective date and justification.
    Step 5: Submit
    ... something 'application focused', not 'resource focused' as the end user community is not particularly aware (nor do they really need to be) about the details of how a user is authenticated.
    I can get 'close' to this using a request template, with this flow:
    Step 1: Log in to OIM
    Step 2: Create a request.
    Step 3: Select a Request Template. (I named the template after the application - "Select App Account")
    Step 4: Select Your Resource (only one in this case - restricted to "AD User")
    Step 5: Enter information about the AD account. (I can restrict this down to only allow for group selection, which is great.)
    Step 6: Enter effective date, justification
    Step 7: Submit
    So the only thing I'd really like to 'skip' (or somehow default) is the selection of a resource and skip that step - because the template only allows for a single selection anyway, and having an extra step with a single selection that may only muddle the process would be detrimental to the usability of the request.
    Is this a modification that we can make to the request flow ("If only one resource, default and move on") - or will we need to create some form of customized request process using the APIs?
    I've dug into the JSF navigation in the iam-console-faces WAR file; it seems that navigation is tied up in the backing beans - has anyone else used Request Templates to meet this type of need?
    My thanks in advance for any insight you can provide!

    Dewan.Rajiv wrote:
    It's a new flow which Oracle has introduced in OIM 11g. You can't skip that selection until you do modification in OOTB UI.
    RO is mandatory thing to raise request so you can go for custom UI (Need ADF Knowledge) in which you'll ask end user to select other things except that Resource and you'll fetch RO name from some configuration file for using in request APIs.Thanks - it looks like customizing the OOTB UI might not be possible - rather than using ADF/Faces configuration files, most of the navigation redirects seem to be 'hidden away' in compiled class files. (My original thought: add some kind of filter and/or extension to an ADF Task Flow that governs the request application flow - but there are not task flow files to modify?)

  • Customizing request table

    Hi to all
    Please tell me in which table Customizing requests are stored.
    So that i can find out which user has generated request with object name.
    Regards
    Anubhav

    Hello Anubhav
    If you want to make a detailed tracking of all changes in customizing then you need to create BC-Sets from your customizing requests.
    BC-Sets are also the only way to create different "versions" of customizing settings.
    Further readings:
    [The Business Configuration Set Technology|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20749c9a-b612-2a10-af89-fed8f4f28876]
    [The Customizing Cross-System Viewer|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63ecc890-0201-0010-99ae-db3841f39146]
    Regards
      Uwe

Maybe you are looking for

  • How do I read this "standard" table in my Function Module?

    I have a remote-enable Function Module (RFC).  I am receiving two tables as part of the parameters.  Table "A" is header information, and Table "B" is detail information.  So for every 1 "A" header record, I may have 1 to many "B" detail records.  I

  • How do I stop Photoshop from launching when I turn on my MacBook Pro?

    I subscribe to Adobe CC. Every time I turn on my MacBook Pro, Photoshop CC launches. I want this to stop. When I right click on the Photoshop app > Options > Open at Login is NOT checked. And in System Preferences > Users & Groups > Login Items >  Ph

  • Selecting an entire row with the help of Checkbox

    Hi and Evening to Everybody, I have a Scenario where i need to select an entire row using the check box. Let me first define the Situation. I created a Simple Sql-report where the first column is a Simple Checkbox and the second column is a display o

  • I need to reset my security questions. How to contact support?

    This may sound stupid but how do I contact support so that I can reset my security questions and have my account unlocked so I can purchase again? I tried the links provider for in the account page. 1. go to the www.apple.com/support 2. clicked on iT

  • Flash menu not appearing in Captivate 4

    Gentlefolk; I am evaluating the Captivate 4 trial version and ran into a problem. I cobbled together a quickie menu in Flash which works fine in C4. However, seeking a more elegent solution, I created another menu using a Flash menu generator (Antsso