Customs document type cannot be determined for external document Type F8

Hello Experts
Need help
I am trying to transfer F8 to GTS 10.1 and getting following message in GTS  Transfer log for export:
Customs document type cannot be determined for external document Type F8
New implementation
GTS 10.1 running with SP 12
ECC side Plug-In settings are fine. BAdi is Active.(There is no document mapping for F8/CUSDEC as it is not required in 10.1)
GTS side configurations are also fine. Checked several times by 4 sets of eyes!!
(Include general settings configurations, Customs communication configurations:)
(Defining technical medium, conditions/output parameters, defining messages for communication process,
defining determination for activity sequence and control settings for communication process)
Despite this I am not able to trnasfer F8 successfully
Can someone throw some light on this issue please?
Keshav Murthy
[email protected]

Hi Dhilipan
Here we go..
You asked me to check the following
Please check following things
1) Legal regulation is activated. - Yes Activated
2) Process template assigned to the legal regulation - Yes Assigned
3) Activity Sequence determination - Yes done
4) Open the activity sequence in under Control settings for Communication processes and check if there is a document type assigned to it. Table- /SAPSLL/TLEPAF - Yes done.
It is really puzzling.
Thanks
Keshav Murthy

Similar Messages

  • Customer/vendor could not be determined for intermediate document

    does any one know how to solve this problem, i got this error for an inbound idoc 820 (remmitance advice).

    Hi rob,
    Message no. FD017
    This is the following message:
    Customer/vendor could not be determined for intermediate document 0000000000047039
    Message no. FD017
    Diagnosis
    Several procedures are defined for determining the partner (customer or vendor):
    1. The customer/vendor can send his/her account number (the account
       number in our system) in the address segment.
    2. The customer/vendor can send his/her account number (our number at
       the customer or vendor) in the address segment.
    3. Only the name in the address segment clearly identifies the
       customer/vendor. In this case you can create an allocation within
       intermediate document customizing (IDoc base -> Control -> Forward
       inbound).
    4. The customer/vendor is determined using his/her bank details (only
       for the "INVOIC01" intermediate document type).
    5. The customer/vendor is taken from the control record of the
       intermediate document.
    For 1.-3.: One of the address segments with the partner functions
               "II", "RS", "SU", 'SE' ("INV_ID01"), or "RS" or
               "LF" ("INVOIC01") is used for determining the
               customer/vendor.
    Procedure
    Create the customer or vendor within Financial Accounting or maintain his/her bank details.
    Create customer         - Proceed
    Customer bank details   - Proceed
    Create vendor           - Proceed
    Vendor bank details     - Proceed
    If the customer/vendor can only be determined using his/her name, create a record within intermediate document customizing with
    logical address = name, application = "FI" or "MM" and physical target in the SAP system = customer number/vendor number.
    Proceed

  • Customer/vendor could not be determined for IDOC

    Hi all,
    Am trying to post incoming payments through EDI ..
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    Am getting these 2 errors :
    Customer/vendor could not be determined for intermediate document
    Company code could not be determined for intermediate document
    Has anyone encountered this problem, if yes can anyone suggest the solutions, any help regarding this is highly appreciated.
    Thanks.

    Hi,
    Currently I am facing with the same type error when trying to post incoming payments through EDI.
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    I am getting the below error:
    1. Company code could not be determined for intermediate document
    I have maintained record records for partner type and partner number in OBCA.
    Please advice what are the other configuration changes do I need to maintain.
    Your assistance would be highly appreciated.
    Thanks.
    Edited by: Victor Collins on Feb 27, 2009 9:31 PM

  • VKORG, VTWEG, SPART cannot be determined for customer C3000 , vendor VENDOR001

    Message Type is ORDERS & basic Type is ORDERS05.
    While executing IDOC, we are getting error message 51 with below message.
    Message no. VG204
    VKORG, VTWEG, SPART cannot be determined for customer C3000 , vendor VENDOR001.
    Relation with SAP values is maintained table EDPAR. but while executing IDOC through IDOC_INPUT_ORDERS, System is not collecting values from EDPAR table.
    Do we have user exit available to resolve this issue.
    Please help.
    Thanks & Regards,
    Ashish Mankar/Ganesh.

    Hi Guido,
    One of my clients are getting the same error, and without a complete access to their system its proving very difficult to resolve.
    I know about VOE4 - Mapping, where the supplier 'maps' the customers cost-centre/business unit/int ref etc to suppliers account number.
    Just wondering what is the difference between VOE2 and VOE4?
    Thanks,
    Tanzim

  • IDoc error: VKORG, VTWEG, SPART cannot be determined for customer PNR020 , vendor 0000010000

    Hi,
    we want to use EDI & IDoc to fulfill communication between group companies. i have done some related setting:
    scenario: PAQ(customer) as a customer deliver PO to PAD(vendor), then PAD created SO automatically:
    but PAD cant' create SO due to:   VKORG, VTWEG, SPART cannot be determined for customer PNR020 , vendor 0000010000, i also have maintained table: EDSDC, but still failed, Could someone please let me me know how to fix this, thanks.
    PAD setting:
    we20:
    table: EDSDC:

    Hi Mishra,
    Thanks for your reply, have a great day.

  • Text determination for billing document

    pls tell me text determination for billing document.pls tell me each and every phace for text determination for header billing document;
    when am creting text determination am getting so many problems,
    i saw in text form in header text,but i didnot get it in  out put invoice,
    pl send each and every phace of the text determinations,if possible send screen shots for text determination,
    its urjunt

    hi
    1) T-code VOTXN ,for the text object Customer>Sales and distribution>click the Text types-->create your 4 digit Text ID
    2) Come back to initial screen of this t-code and again selct the text object Customer-->Sales and distribution and click change. Select the text procedure and double click on the Text IDs in text procedure.Here you create a new sequence and select the 4 digit Text ID you have created initialy.
    3)Asign the Text procedure which you have selected in step2 and double click onText procedure assignment .Here you assign the Text ID to the Customer Accout group.
    4) In the customer master,sales area tab>Extras menu>text,Select the text which you have created now and enter text into it. and save.
    The text which you have created now ,can be used for multiple purpose(Ex.sales order,delivery,billing,pricing,inforecords,legal). for example in this case, You just want to display this text during sales order processing,then proceed as follows,
    5)T-code VOTXN ,for the text object Sales document>Header>click the Text types-->create your 4 digit Text ID.
    6) Come back to initial screen of this t-code and again selct the text object Sales document-->Header and click change. Select the access sequence and create new acces sequence(This access sequence is similar to that of in Pricing).Select this acces sequence and double click the access sequence for text ids.Here in the first column this is Serial no.second column is text object(This is the area from which text has to be refer.In our case we have created the customer Text object for sales and distribution area,so i.e.KNVV) and the next column is Text id,This is the id which we have created at customer text object for sales and distribution initialy,at step 1). The next column is partner function,it will identify for which parter this text has defined.Next 2columns are Languages(if you want to define for all langugage or specififed language),next column is for specified languge for partner function.if you have any requirement to be fulfilled you can create those requirements in the next columns or else leave blank,save and come back to text proceudure.id.
    7)Select the text procedure(for ex.01-Sales header) and double click on the Text IDs in text procedure.Create new entries Fill in the sequence and the text id which we have created for sales document-header(in step 5).There is a small check box in the 3rd column which is used whether the text should be refered or copied(this is used if you want to modify the text during the sales order processing or just dispaly the originail text as it is),next column is whether the text should be displayed while creating or it is not obligatory, last column is acces s sequce,this is nothign but the sequence which we have created in step 6) and save.
    8)in the final step assign the text proceudre id to the particualre sales order.

  • IDoc status error 51 : A company code cannot be determined for LS

    Hi,
    We are trying to post an Idoc into R/3 but getting the IDoc status code 51 :  A company code cannot be determined for LS
    What could be the possible reason?
    Should we use Party in Receiver IDoc scenarios?

    Hi,
    I have quite the same problem. I built an IDOC with WE19 and I have the message "A company code cannot be determined for LI 0000031004".
    As explained in note OSS 117808, the partner number (31004) and partner type (LI) are read from the control record of the IDOC. I enter this values in OBCA and OBCE customizing points, to determine the company code 'LC'. It doesn't work.
    PT Rao, what do you call "activate partner profile" ?
    Thanks in advance.
    Regards,
    Arnaud

  • Partner determination for sales document item

    Hi people
    We have a partner function in sales order (carrier) that must be determinate by item, this is necessary because we sell different materias in the same order that can't be transported by the same carrier.
    In customizing Partner Determination for Sales Document Header is possible to use an user exit assign the origin X, Y or Z, in this case I would use the exit EXIT_SAPLV09A_003, but for partner determination for sales document item i didn't find a way to assign the origin X, Y and Z
    Does anyone have an idea for solving this?
    Thanks
    Emerson

    Whatever Partner functions are assigned to the Procedure  assigned to the Sales document Type, only those partner functions will feature in the Sales document header.
    In the procedure assigned to the Item category you will find like that 3 only only as in the Sales order you can not have different Sold-to-party for different Item.
    Whichever Sold-to-party is there in the header that is applicable to all item. So at item  level Procedure
    sold-to-party partner function is not required to assign.
    Sold-to-party is unique for a Sales order and can not be changed.
    But at Item level, you can have different Ship-to-party for different items so the partner function has to be there and to deliver the item one SH is mandatory, that is why it has been marked mandatory in the Procedure.
    All the partner function assigned to the Procedure at header level will be copied to all item. In your procedure for the header you must be having 5 partner functions.
    You can change the SH at item level for few items.

  • VA00 condition type not getting determined for the returns order

    Hi All,
    I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
    When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
    Note:VA00 condition type is getting deleted from the  internal table tkomv[].
    If any one came across  this scenario can you please help me.
    Request your valuable inputs

    Hi,
    Please check the copy control setting in VTAA.
    Maintain the pricing type as "D" at item category level for the respective document type .
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Error during material determination for sales document item - RRB

    Hi
    Iam getting following error when trying to create a billing request using DP91.
    Error during material determination for sales document item 40001560/000010
    Message no. AD01155
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
    Material origin is checked in costing tab in material master.
    Appreciate help in resolving this.
    thanks,
    Vaishnavi

    Hi Vaishnavi
    The error which you are getting is related to costing.So kindly reach your FI Consultant
    please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
    ERROR AT DP90  TRANSACTION
    Regards
    Srinath

  • Pricing procedure determination for complaint document with reference to billing

    Hello Guys,
    I am configuring complaint process for project purpose and I got stuck. I need to change the pricing procedure which is determined for complaint
    document . Right now the pricing procedure is copied from Billing Document for which complaint refers to.
    I am searching a place in configuration where I could change the pricing procedure determination for complaint document with reference to billing doc.
    Could you please advise where I can find it ?
    Thank you in advance!
    Br,
    Frederic

    Hello Frederic,
    I would check the following in SPRO:
    - CRM
    - Basic Functions
    - Pricing
    - Pricing in the Business Transaction
    - Determine Pricing Procedures
    Here the pricing procedure depends on sales organization, division, distribution channel, document pricing procedure and and customer pricing procdure.
    Best regards,
    Thomas Wagner

  • Batch Creation or Batch Determination for 531 movement type

    Dear Experts,
    I have some confusion with Movement type 531 -
    1) Can we do Batch determination for 531 movement type.
    2)  Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
    3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
    Thanks & Regards,
    Saurabh Kumar

    Hello
    Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
    For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
    and
    No batch determination for by-products may be executed during the confirmation.
    It means that the batch determination for movemen 531 is not a functionality of the standard system.
    I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
    BR
    Caetano

  • Output Determination for Sales Documents distributed by fax/email

    Hi Experts,
    Can some one guide me regarding what all need to be done to maintain output determination for Sales documents to be distributed by fax/email.
    Thanks in advance...
    Regards
    Vamsi

    Hi Vamsi,
    Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
    http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Problems with sources of supply determination for external requirements.

    Hi gurus...
    My scenario is  SRM Classic Extended.
    We have a problems with sources of supply determination for external
    requirements comes from ECC. The shopping cart is created with successful
    based in the purchase requisition at ECC, but when i try to make the
    determination of sources of supply the system doesnt find any source of
    supply.
    There are a lot sources of supply creates for these parameters. The
    contracts were already replicated to ECC.
    This problem only occurs with external requirements comes from ECC, if i
    created a shopping cart directly at SRM, using the same parameters, the
    system propose the sources of supply correctly.
    Is there something that we can do?? This is the normal comportment for the souces of supply?
    Tks,
    Gustavo Nogueira

    Hello Gustavo Nogueira
    Then it is an issue.
    How are you searching the source of supply in sourcing cockpit.
    Can you replicate the issue?
    Let me know step by step,
    as per standard SAP , source of supply data must be available for shopping carts so that buyer can assign the source of supply.
    please share what source of supply you have there .

  • Device types are not suitable for ADS documents when printing Form16

    In Form 16 , while printing the Form16 of the employee it occurs an error "Device types are not suitable for ADS documents" in the task bar.
    Regards,
    Ranga

    Can you check
    Note 1116245 - ADS Check List before sending message to SAP
    and see which of the steps are not working for you?
    Markus

Maybe you are looking for