D-BRacket 2 and keyboard cordless problem with k8n neo platinum

hi
i have two problems
the d-bracket2 doesn't work
when my game controller is on , it isn't recognized by Win XP
but the 4 leds are green.
i tried the two connectors and it's the same thing.
my logitech cordless keyboard doesn't work in the bios
i tried with the ps2 but the keyboard didn't work in XP
i check the bios with an other keyboard and the usb keyboard support is enabled
can you help me ?
PS: Sorry for my english

Hi galette,
Do you have a k8n neo or neo2 ?
At least some neo2's have problems with ps/2 keyboards. Their users could circumvent this by using usb keyboards.
I have a logitech cordless desktop myself and for me it works. Perhaps you can borrow a usb keyboard to test it ?
vanish

Similar Messages

Cool & Quiet Problem with K8N Neo Platinum

Hi!
I just formatted my windows xp and encountered weird problem with Cool & Quiet.
Before the format CQ worked perfectly, but now when I apply minimal power management from the properties Windows freezes.
I have 1.2.2.2 drivers installed and CQ enabled from BIOS.
BIOS has been updated to 1.7, 1.9 bugged for me.
Windows XP SP2 + all hotfixes.

Quote from: aicjofs on 09-October-05, 02:49:29
If all he has done is "reformat" windows what would have changed in the BIOS magically? Still seems like the driver to me...Troubleshoot what has obviously changed since things worked normally. If he didn't touch the BIOS and only reinstalled Windows the driver is the logical issue.
Ugh...even in that linked article the guy is saying the HyperTransport is the link between the CPU and Chipset/RAM. There goes this RAM thing again. The memory controller communicates with the DRAM controller no Hypertransport about it...
ok, but where is DRAM controller? in CPU my friend and in Athlon 64 is DRAM controller in CPU so this is HyperTransport - comunication with CPU and memory...no only me has this mention but also another guy and another, so all of us are wrong yout think?

Post problem with K8N Neo Platinum

I am assembling a system for a friend and it hangs according to D-Bracket2 on Processor initialization (Led 1:red, led 2:green, led 3: green led 4: red)
Specs
PSU: Codegen 350W ( 3,3V 14A
5V 30A
12V 15A )
VGA: Sapphire Radeon 9800 Pro 128MB
CPU: AMD Athlon 3000+
HDD: Seagate 7200.7 120GB in SATA1-port
DVD: MSI DR8-A DVD Burner
RAM: M-Tec 512MB DDR400
If the problem is the processor it should hang on Power On (all leds red), right?
There's some damage done to CPU fan connector so the sensor wire from the CPU fan might have no connection to the mobo. How about ESD-damage, can it cause this?
Another thing I might have done wrong is connecting front panel connectors.
I am just hoping and praying that the processor is OK and the mobo causes this.

Thanks to RacerX for answering but the problem wasn't the PSU.
Mobo caused it and I replaced it. I think it was the physical damage I mentioned in the first post. I also changed hdd from SATA1-port to SATA3-port but I don't think it matters.
Now everything works fine so +12V/15 Amps is enough.
Does the K8N Neo Platinum hang on Processor Init if it doesn't detect CPU Cooler?

Boot problems with K8N NEO Platinum(no video). SOLVED

I have this board for a few months now, but this week, when powering the system, it gave me no video.
It reads the HD and after a little while all the lights in the D-Bracket go green. But still no video.
There are other simptoms that can help the diagnosis: sometimes i do get video, the system powers up perfectly. This happens when I repeatedly press the reset button, or try powering on and off, on and off...
I don't think it is cold boot problem, since when I successfully turn on the system and then turn it off, the same boot problem occurs I I try turning it on again.
Another thing is that when I turn it off through Windows, it doesnt actually turn off: the screen ges black, but the HD leds still blink for a looong time. I have to turn it off manually, then. Sometimes it actually turns off, but turn itself on again after 1 second.
So if the D-Bracket sais its all good, then what is bad?
My System specs are
Athlon 64 Venice 3000
1 Gb Corsair DDR
Leadtek Geforce 6600GT

Quote from: cyberoll on 19-April-06, 19:18:18
Its solved now. There was a short circuit. The rouded isolators were placed in the upside of the board, and they should have been under the board. I changed it and all the problems are gone.
Such a little thing... :D
What is a "rouded isolator" and where is it located. I would like to see if this will fix my problem. The same thing is happening to me.
Thanks

Display problems with K8N Neo Platinum

I have XP Professional installed on my Raptor fine, but I am having issues with my Radeon 9800. I cannot boot XP unless I hit F8 and then select "Enable VGA Mode"
When I do not enable VGA mode, my monitor goes blank right before the Welcome screen.
Moving along...now when I boot with "Enable VGA Mode" I cannot change ANY monitor settings. If I increase the resolution from 640x480/8bit to, let's say, 800x600/32bit, the screen will go blank for a few seconds and then a black screen with a white blinking cursor at the top left corner will show. After this, my monitor just completely shuts off and I am forced to restart.
I also had problems with the ATi Control Panel. The ATi driver package installed fine, so I rebooted but when Windows started, I received an error message saying that ATi Control Panel could not load.
I'm baffled right now and I really don't know what to do. Any help is appreciated, thank you guys very much.

You might want to try and reinstall the video drivers and make sure that you uninstalled the old ones fully with Driver Cleaner.

MOVED: Boot problems with K8N NEO PLATINUM (no video).

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=96137.0

Quote from: cyberoll on 19-April-06, 19:18:18
Its solved now. There was a short circuit. The rouded isolators were placed in the upside of the board, and they should have been under the board. I changed it and all the problems are gone.
Such a little thing... :D
What is a "rouded isolator" and where is it located. I would like to see if this will fix my problem. The same thing is happening to me.
Thanks

Endless problems with K8N Neo Platinum

I am really frustrated. My new motherboard just plain isn't doing what it needs to do. The problems can be put into 3 categories, in order of severity:
1. Realtek Ac'97 Audio Card DOESN'T EXIST - It isn't even an unknown device in the Device Manager. It doesn't help to install the drivers because as far as the system is concerned there is no internal audio card on the Motherboard. Needless to say, I have absolutely no audio on my system.
2. USB Ports malfunctioning - All of the USB ports will realize when devices are plugged in, but the drivers for those devices will not load. A little bubble will pop up down in the system tray with the USB symbol that says "One of the USB devices attached to this computer has malfunctioned, and Windows doesn't recognize it." Below it shows the supposed "location of the device" which always shows it as an "Unknown Device" on the "USB Root Hub" which I assume means the 4 USB ports attached to the motherboard. It even says this if the device is plugged into D-Link or to the front panel.
3. Floppy Drive not working - Even though apparently the floppy disk driver is installed and "Drive A" shows up in "My Computer", whenever I try to access the drive with a disk in it a dialogue box shows up saying the disk isn't formatted. When I try to format, it is unable to do so with the message "Windows was unable to complete the format."
I received the motherboard on Thursday, and I've already submitted an RMA with the distributor (Zipzoomfly.com). If you have any suggestions please let me know.

Well...I don't know about the expert stuff, but we've seen some real "dingers" here at the forum...most of the problems are easily fixed - once the correct information is given in the signatures. Most problems have been caused by incompatible memory, and/or lack of a quality power supply.
It sounds as though you had already made up your mind to RMA the board...and with those glitches right off the bat..I would do the same thing. But...I know nothing about your computer, whether it is all new - or you've just added old components to a new motherboard. So you see how important it is to create a signature describing your total system specifications....even amperage ratings on the +12v rails.
Your board could be salvageable...I don't know your set-up though!
SAB

Wake on LAN/Keyboard wake for a K8N Neo Platinum - how do I use this?

I've got a K8N Neo Platinum motherboard that I am using in my home theater PC and I was hoping to enable either the wake on lan or keyboard wake functions so that they could be controlled via a remote control. For now disregard what the overall outcome I want to achieve is... what I want to know is if enabling the WOL and/or keyboard wake function will allow me to turn on the PC from a completely powered down state as opposed to just powering up from a sleep/hybernation mode. I have read people with other motherboards have been able to power up by using their keyboard, mouse or even WOL when the computer is totally shut down. I'm trying to avoid leaving the PC in a sleep/hybernation mode due to electricity usage. Does this motherboard have the ability to power up when the whole system is shut down?
Also, what key on the keyboard is used to wake up the computer? The manual and bios instructions say nothing about what key needs to be pressed to wake it up.

I know you can set various wake options in the bios. Check there!
You can wake up the computer by wriggling the mouse or pressing any key, if the options are enabled in the bios.
Hope this helps

How do you Norton Ghost 9.0 with K8N Neo Platinum?

Hi,
I have K8N Neo Platinum and I can't ghost! I use the Norton's Ghost 9.0 boot CD and push f6 to add Nvidia Raid Driver. I used 2 Nvidia Raid drivers. One was on MSI webpage date 6-23-2004 and the other was 5.10 driver .Both of them say nvidia.sys error and the computer reboots. Has anyone image or clone hard drive in RAID 0 ? What software do you guys to use to clone or image with RAID 0 with this mobo?
Please Help,
Scott

There are a few posts about seem to be varying degrees of success
Raid Setup Help
suggest forum search for Ghost
try PM pps to see what drivers they used
good luck

Boot problems with K8N Neo FSR

Recently i bought a new MSI K8N Neo FSR mainboard and an Athlon64 3000+
I noticed that a lot of people on this board had problems when booting Windows XP
I had the same problem: Every time i tried to boot Win, it freezed at the Win XP logo.
It seems that the problem is my cordless logitech keyboard.
When i'm using a standard PS/2 keyboard i have no problems booting.
Are there any known problems with nForce3 based mainboards and cordless logitech keyboards?
Does anyone know if there is a way to fix this problem?

There just seems a problem with some mobos and keyboards.
Usually it's a PS2 thing, but looks like you have found another to add to the list.
Note...
COMPATIBLE INPUT DEVICES (Keyboards)
Aspire/Mitsuko Internet Keyboard
Cherry Soft Touch
Chicony #KB-9805
Compaq EVO Series
CoolerMaster Q
Dell
Logitech Cordless Duo, Logitech Ultra-X, Logitech Internet Navigator
Logitech Di Novo Series
Memorex Multimedia
Microsoft Multimedia Wireless, Microsoft Desktop Elite
Mitsumi #KFKEB9HY
Qtronix Scorpius
Viewmate Office

Boot Problem with K8n Neo 2 Platinum

I cant get my Computer to load the bios
Sometimes when I restart my computer it will lock up in the Bios Sign on and the only way to get it to boot through is to keep resetting the computer and turning the power off and on. It does this on a random basis, Ive also had problems with it locking up if the dynamic oc is turned on.
Has anybody heard of this happening or know how to fix it?
MSI K8N Neo 2 Platinum Bios 1.4
Athlon64 3800+
TwinX 1024 3200LLPRO
Xtasy 9600XT
Ultra Products X-Connect 500w
2x WD Raptor 10,000rpm SATA HD in Raid 0 cfg
SB audigy 2 ZS
LiteOn cd/dvd drive
LiteOn dvd burner
Windows XP SP2

Corsair memory is known to be troublesome with AMD64.
Nevertheless, if everything is set correctly, it'll work. I've been running the LLPRO 3200 1GB kit at 220MHz without any noticable problems. Run a couple of rounds with Memtest86+ to verify memory functionality.
Can you please give your specifications on the power supply unit (PSU), especially the amperage on the +12 volt rail.
Anders.

Boot-up Problems with K8N Neo

I've just upgraded my computer with a K8N Neo motherboard, AMD 64 3000+ processor and a nice new Antec case.
I have a few problems so far.
1. 95% of the time, when POST gets to "Verifying DMI Pool Data"...the NVIDIA Boot Agent will kick in, i assume because it can't boot from my hdd. But i can't for the life of me figure out why, the hdd is from my old computer but it's a clean copy of Windows XP on there. I have disabled SATA in bios. The other 5% of the time my computer boots up fine.
2. POST is very slow, it can take up to 5 minutes just to detect the IDE drives.
Any help would be greatly appreciated, i'm not sure if ive included enough information, so please ask if you need more.
Thanks!

hi dave,
can you give us more details about your spec please,
Memory, Hard drives (Manf Model Capacity & Pata(ide) or Sata), optical drives, power supply model & max amps on 3.3,5 & 12v rails please.
this will help us to help you & save unesecary questions.
Quote
but it's a clean copy of Windows XP on there
youve just created this on the new mobo?
enter bios -
Cmos setup check that your drives appear as you expect them.
Advanced bios options - Hard disk boot order check that the HD with windows on is at the top of the lisi, use pageup/down keys to move it.
save changes & exit

Weird problem with k8n neo fsr

hello!
i have weird problem with my K8N Neo-fsr and Athlon 64 2800+ socket 754, when i try to overclock i change in bios HT from 4 to 3 (for better stability), after restart nothing happen, my pc wont boot, also nothing on screen, so i must clear cmos for solve my problem and set to 4 i try several bioses from official to moded also pinochio`s and syar`s moded and allways the same issue is it problem with processor? or motherboard?
thanx for your help and sorry for my english

You should first get down cpu ratio, then get up cpu fsb and as you wanted set ht frequency from 4 to 3 and "save changes and exit" if it doesn't boot change you psu (at least antec 380 or tagan) or go fast to send back your mobo to reseller!!

Shutdown problems with K8N Neo

I'm having problems shutting down Windows XP with my K8N Neo.
I can reboot without a problem but when I shut down, windows will lock up after exiting the user's session. Then I have to force a power off by holding down the power button.
It's not a big deal but it's annoying.
I believe it has something to do with nVidia's IDE drivers but I'm not sure.
I'm using the latest official nVidia Unified drivers (4.26)
Also using the 1.42 BIOS.
Has anyone else experience this or know how to fix it?

Yeah I experience exactly the same problems. Will shut down OK when no or limited programs have been run, but after using the computer for a while particulaly after browsing the internet, Windows XP shutdown will hang.
I've read one link about possible solutions and centre around the ACPI driver set up etc. (https://forum-en.msi.com/index.php?topic=2000.0). My computer is shown as ACPI but I do not have the APM tab in my power options - maybe this is the cause. The other solution is to enable the NT APM/Legacy device but every time I try I get the yellow exclamination mark next to the device (even after rebooting) to show that it has not be intialised properly.

Download Problems with K8N Neo4 Platinum Nvidia Ethernet Controller

Just to ask if there is some basic setup for Nvidia network drivers in Windows or in BIOS since I'm having download errors with a DSL connection when i use the Nvidia networking controller, not depending from the OS I'm booting (WinXP Pro SP2 or WinXP pro 64). When I download using the Marvell Yukon controller everything works fine in both operating systems. Additional specs:
K8N Neo 4 Platinum (latest MSI Nforce4 drivers)
Athlon 64 X2 4200+
2GB Transcend RAM
EVGA 6600 GT 128MB PCI-E
Samsung Spinpoint 200GB SATA (Win XP Pro + SP2)
Samsung Spinpoint 200GB SATA (Win XP Pro 64)
Samsung TS-H522U DVD-RW
Seventeam ST-550EAG 3.3@30A 5.0@30A 12V1 & 12V2 @ 18A each

Quote from: Indigian on 07-November-05, 00:23:35
Open up the nvidia firewall.
Click on 'Active Armour'
Click on 'Application'
change the setting from 'offloadable' to 'notoffloadable'
This solves the download problem.
Indigian, you are The Man!!!!!
That solved it !!! Thank you very much!

D-BRacket 2 and keyboard cordless problem with k8n neo platinum

Similar Messages

Maybe you are looking for