Daily Production Report In coois

Dear All
When we r checking in Coois report for production entry Of SFG.FG--it will give us the Total qty,
exactly we want that suppose one order qty is 15000 and i have put a production order of that Qty.  But according to Production Its going On With 500 or 600 per day produce.  then how can we see the production report of particular production confirmed qty and delivered qty  500 on which day . or we can see the Daily production report of Particular FG & SFG.
Rgds
Pankaj Agarwal

Dear Pankaj,
One way of addressing this issue is go to MB51, movement type 101 & 102 7 other relevant criteria.
Plant n storage location.
Execute>CtrlShftF12, you will see the list of material recvd. in the storage loc. you can also find the Production Order no.
you can see when GR has happened against Prod. order.

Similar Messages

  • Daily Production reports

    Dear Frndz,
    Are there any ready-made daily production reports available in the system.If so, pls help me with what are all the reports available and the transaction code /Path of the same.
    Regards,
    Srini

    Hi,
    You can find useful reports of PP in Production--> Shop Floor Control--> Information System as below :
    COOIS - Order Information System
    CO24 - Missing Parts Info System
    MD09 - Pegged Requirements
    MD04 - Stock/Requirements List
    MMBE - Stock Overview
    CO09 - Availability Overview
    CO46 - Order Progress Report
    MD4C - Order Report
    Further you can find other reports also under information system by drilldown in following segments :
    Shop Floor Information System
    Capacity Evaluation
    Capacity Evaluation
    Use of PRT
    Controlling Reports
    Hope this helps.
    Revert if you have any doubt.
    Regards,
    Tejas

  • Delay time data at Daily Production Report

    Hi all
    We hereby crated the Daily Production report which has the delay deatils of all depts. The delay details we are using with notifications. The problem is users required the shift wise delay according to the production.
    SAP std we couldnt keep the shift at notifications level (exit also helps but time couldnt assign). The Shift A is 7 am-3 pm, B- 3 pm to 11 pm. C- 11pm-7 am. The malfunaction start time some time may exceed from the A to B shift. But delay calculation hours is only one. With out going for hard coded how could assign the delay hours shift wise.
    At notification level is Capacity requirements will appear as per shift ?
    please suggest

    Hi,
    1.Select a capacity category for which the actual capacity requirements are to be calculated on the Capacities tab page in the resource.
    2.Choose ActCapReqmnts.
    3.The Settings for Determining the Actual Capacity Requirements dialog box appears.
    4.Set the Calc. actual cap. reqmts indicator.
    5.If the actual capacity requirements are to be calculated from activities:
    Enter one activity for each actual capacity requirement in Actual capacity requirements from activities. Determine the standard value parameter that identifies the corresponding activity.
    regards,
    Venkatesan Anandan

  • To prepare daily production report in grade wise

    Hi,
    Need your help regarding grade wise Finish Goods. My finish goods product code is in database 1601001. When bulk receipt from production how to separate grade wise quantity.
    Example:
    My production order quantity is 100000 pcs and receipt from production in stock is 95000 pcs. Now in 95000 pcs, 75000 are grade u201CAu201D quality and rest of 20000 pcs are u201CBu201D quality.
    There is any option that I can prepare daily production report in grade wise.
    Regards,
    Mizan

    Hi.....
    Go to Item master data whihc you want to maintain Gradewise.
    In general tab you find Serial or Batch Number under which just select Batch and select on every transaction......
    This will hjelp you to manage your inventory by Batches which you consider as grade......
    Regards,
    Rahul

  • Daily Production Report with Variance or receipt of Production

    Hi All..
    my one of the clients want the Daily Production Report with Variance or receipt of Product?
    Please let me know what does it mean and how can I fetch this report
    Thanks
    Rahul

    Hi Rahul,
    Try This
    Daily Receipt From Production report
    SELECT T1.[BaseRef] as 'Production Order No', T0.[DocNum] as 'Receipt No', T0.[DocDate] as 'Receipt Date', T0.[CardCode] as'Customer/Vendore Code', T0.[CardName], T2.[ItemCode], T2.[ItemName], T1.[Quantity] as 'Receipt Qty', T1.[OpenQty] as 'Open Qty against Pro Order' FROM OIGN T0  INNER JOIN IGN1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode WHERE T0.[DocDate] >=[%0] and  T0.[DocDate] <=[%1] and
    T1.[BaseRef] IS NOT NULL
    Summary Report For Production Order
    SELECT T0.[DocNum] as 'Production Order No', T0.[PostDate], T0.[DueDate], T0.[RlsDate], T0.[CloseDate], T2.[ItemCode], T2.[ItemName], T3.[CardCode], T3.[CardName], T0.[PlannedQty], T0.[CmpltQty], T0.[RjctQty] , (T0.[PlannedQty]-T0.[CmpltQty]-T0.[RjctQty] ) as 'Open Qty' FROM OWOR T0  INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode LEFT OUTER JOIN OCRD T3 ON T0.CardCode = T3.CardCode WHERE T0.[PostDate] >=[%0] and  T0.[PostDate] <=[%1]
    Thanks,
    Srujal Patel

  • Daily production report

    Hi, Is there any standard daily prod report available in sap? pls wht is the t-code?

    Dear Yadav,
    There are few reports available in standard SAP,but you have to check which one suits your business
    requirement.
    Check COOIS,CO28,MCPM,MCRE,MB51 for material document
    For further reports goto T Code SAP1->production planning->Production control or Information
    systems.
    Regards
    Mangalraj.S

  • Production report through COOIS

    I am working in dicerete and REM scenerio.Client needs report ,work center wise daily production .In report layout   through transaction COOIS when I am selecting quantity confirmed .The production order confirmed quantity is comming.But planned order confirmed quantity through backflush MFBF is not comming.
    I need report in this format
    I/P
    plant
    material
    o/p
    posting date   work center    confirmed quantity  total planned order quantity
    Manoj

    For MFBF i.e. REM orders you need to use the transaction
    KKF6n  or KKBC_HOE to check the details of qty and cost and not COOIS.

  • Shift wise production report

    hi Exprts,
    Process:
    I shift starts at 6.00 am and ends at 14.00 hrs
    II shift starts at 14.00 hrs and ends at 22.00 hrs
    III shift starts at 22.00 hrs and ends at 6.00 am (next day)
    3.We confirm the qty in the t.code CO11N
    The requirement is : How to take the Shift wise production report? , and also a report which shows consumption of components against production order in a shift.
    Regards
    Ramesh

    Dear Ramesh,
    check this link to first post the confirmation shiftwise ,both in CO11N and CO15.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0fa9a04-376a-2c10-c396-86d32ac80614?quicklink=index&overridelayout=true
    Further to this you can get the shift wise production report using COOIS.
    Regards
    S Mangalraj

  • T codes for production reports in REM

    Dear All,
    What are the std. t code for production reports in REM like daily production report,monthly production reports,shift wise production,bom reports etc.
    Thanx in advance
    rg
    Tushar

    Hi Tushar,
    Following are the standard reporting T-Codes REM
    MCP9 - SFIS: Select Run Schedule
    MCRM - Reporting Point Statistics: Selection
    MCRP - Material Consumption Analysis: Repetitive Manufacturing
    MCRK - Product Cost Analysis: Repetitive Manufacturing
    MCP6 - Goods Receipt Analysis: Repetitive Manufacturing
    MF26 - Display Reporting Point Quantity
    MF51 - Print Production Schedule
    MF52 - Display Master Production Schedule
    MF57 - Coll. Display of Planning Screens
    MF60 - Pull List 4.5
    LAS3 - Display Sequence Schedule
    If you won't find your requirement in these,you need to develop new one accordingly taking the technical consultants help.
    Regards.

  • Daily/weekly/monthly production reports

    Hi Experts,
    IMy client needs daily/weekly/monthly production reports with graphical representation. I want to know in acase there are any standard reports which will be a work around solution for the above said reports.
    Thanks

    Hi nandi6346,
    Yes, COOIS : Order informaton system, it self gives graphical representation for production reports.
    Go to COOIS - execute as per required date, to get grafical representation select the coloumns you required, e.g. Production order, target qty, Confirmed Qty, Delivered Qty, Scrap Qty, etc and the click on "Display Grafic" tab, it will show you grafical report.
    Tara

  • Daily production /rejection report

    hi pp gurus
    can anyone guide me
    I want production report shift wise ,how
    much production carried out
    i hav three shift
    and howmuch rejection is carried out against production order
    Regards
    Dev

    HI
    you can use t: code : COOIS : order infomation system
    give you all order number and qty
    with reference to date and time
    Please reward points
    Sunil

  • Developed a report for the daily production done.

    hi experts,
    please give me tables and fields for following report, and also exlain me briefly,
    Developed a report for the daily production done.
    thanks in advance,
    radhakrishna

    Hi Prabhakar,
    Well you can opt for ALV display...
    You want to generate report based on plant data..
    Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
    The radio buttons will decide your selection critera.
    I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
    In case you are finding it to difficult to get the relations between the tables or finding list of tables,
    i shall send u docs which will help u solve the problem.
    Give me ur email id
    Regards,
    Tanveer.
    Mark helpful answers
    Message was edited by: Tanveer Shaikh

  • Production Report for consumed Batches

    Hi All;
    Can anyone pls suggest a standard report where we can see the batches consumed for production/process orders on a given date range i.e the final output should give the  production/process order number with the batches consumed against them.
    Thanks

    Dear,
    MB51 with material number, plant and movement type(usually 261/262) with posting date should give me the batches used in production order.
    COOIS or COOISPI also can be used.

  • Production report date wise

    sir,
    actually i want daily cost of finish goods within that seperate the completed qty cost & rejected qty cost
    & also the raw material cost which i issue for that finish good.date wise.

    Hi
    please check the link :
    Re: Date Wise Production Report
    Regards

  • Production Report using Product groups.

    Hi PP Gurus,
    We want to develop one Production report that will include Product group.
    We are using single level Product groups. Say PG= XYZ and PG members are A, B, C, & D. Since REM without RP and with daily confirmation being used we'll sort the results through MSEG table after passing MBLNR and MJHR from table MKPF using Movement types 131 (that will exclude Reversal quantity i.e through Movement type 132).
    My requirement is to bring Product group in production report that will club above mentioned materials.
    If anybody already worked on such requirement, please help me out.
    Thanks & Regards,
    Abu Arbab

    Hi Rajesha,
    Thanks for reply.
    Since REM without RP I'm using no need of AFKO table.
    Used logic as below:
    Taking BLPK-BUDAT as input:
    1. Select PGMI-PRGR, PGMI-WERKS to get PGMI-NRMIT.
    PGMI-NRMIT = BLPK-MATNR to get BLPK-PRTNR.
    BLPK-PRTNR = BLPP-PRTNR to get BLPP-MBLNR.
    BLPP-MBLNR = MSEG-MBLNR, MSEG=MJHAR to get MSEG=ERFMG
    Sort through MSEG-BWART = 131 negative 132.
    2. Select PGMI-PRGRP, PGMI-WERKS to get PGMI-NRMIT.
    PGMI-NRMIT = BLPK-MATNR to get BLPK-MENGE.
    Sort through BLPK-VAART (B) negative BLPK-VAART (S); donu2019t select BLPK-VAART (BS).
    Addition of BLPK-MATNR corresponding to BLPK-BUDAT entered.
    Both logic are working.
    Anyways thanks for help.
    Kind Regards,
    Abu Arbab

Maybe you are looking for