Dark path's edges after using shape builder tool or masking objects

hi,
i have a problem with path edges after using shape builder tool or masking objects. This problem occurs when i draw bright colored objects above dark colored object. After that i have dark path's edges. Like this: http://img94.imageshack.us/img94/2051/dlm2.jpg     
I have one solution (pathfinder->dive objects and delete some dark elements on the bottom) but maybe someone know another solution for this problem?

Thank you for reply
Unfortunately, I don't have opportunity to print it, but as you wrote, it must be a screen artifact. I exported this file to tiff, then i opened it in photoshop. Everything is ok. All of the edges are clear.

Similar Messages

  • Use "shape builder tool" on "boated polygon" FAILED!

    http://design.tutsplus.com/tutorials/create-a-traditional-russian-khokhloma-ornament-in-il lustrator--vector-24052
    i am trying this tut, but i can't do part 2 step9.
    First i can't do "shape builder tool" while select both the under shape and the cap.
    Second if i create another shape then do the "shape builder tool", the left cap is another "boated polygon" as the picture i attached. I guess the boat effect applied to the new polygon shape again.
    How can i avoid this automatical-shape-change thing?
    ALSO, i tried on other shapes too. I use effects on one shape, then i cut or delete part of it, i can't get the rest shape as i wished. Coz the rest part got the effect again and became a new one. For example i can't get a half flower when i use boat effect on a polygon shape, coz the rest half just became a new strange flower.
    Is there anything i did wrong????
    need your helps!!! PLEASE!!!!

    The problem is not what you did wrong, but that the instructions are incomplete, a common problem with online tutorials.
    After applying the Bloat effect, go to Object > Expand appearance. Then you can select the two shapes and delete the unwanted part with the Shape Builder Tool. Select the new cap shape, duplicate, recolor, scale, move. Select both cap shapes, create blend as I think you did earlier in the tutorial.
    Peter

  • Can't use Shape Builder Tool - getting circle with line through it.

    I can't find any setting or anything I can change to make the Shape Builder Tool work. Using latest version.

    Without more info, it can only be a guess, but be aware that the tool only works on selected objects. PRE-selected, that is.

  • Shape builder tool changing sizes?

    Hello,
    I am using shape builder tool a lot to clean up dxf files generated from cad programs, where there are a lot of loose/open paths. I just noticed that when I join paths with the shape builder tool, the size of the form changes slightly. This effect is not occuring if I join the same paths with the slower step-by-step join command, and I can't see the reason for those minor size deviations?
    Is there a way to change some settings to get rid of this effect?
    Br, Jörgen

    I get a similar result if the strokes have an effect, such as "rounded corner" applied to them. Taking off the effect before using Shape Builder eliminates the issue.

  • Illustrator Shape Builder Tool:  After the latest CC update, the tool alters shapes once edited instead of just removing/adding the desired shape.  Anyone else run into this and/or have any fixes?

    I am using a PC and installed the latest update of all the CC programs I use (AI, PS, AE, etc.) and within Illustrator I've noticed the Shape Builder Tool doesn't behave exactly as it did in the past. (And not in a good way.)
    Previous versions allowed me to edit/add/remove shapes from one another without issue (leaving all shape paths as they were before the editing while making the desired alterations), but the newest behavior seems to alter existing paths once shapes are merged/deleted making the tool almost non-usable. 
    Not sure if there's a check box I'm missing or what, but have done some brief research on the problem and haven't found anything helpful.  If anyone has run into this issue and/or knows a way to correct it, I would greatly appreciate it
    Thanks!

    Please show a screenshot before and after.

  • How do I join two letters using the shape builder tool?

    I am making a sign for my logo. The 'i' in my script face is long and overlaps the following letter which the sign maker's router will not read. So I would like to be able to use the shape builder tool to join the 3 instances where the letter 'i' appears each to the following letter. No luck so far. I have turned the type into points. I have highlighted the first instance, 'i' and 'c'. but the shape builder tool shows a circle with a line through it... not working.
    Anyone have an idea?

    It may take a combination of some of the Pathfinder tools, such as: Intersect, Merge, and Unite.  And, it may be a matter of manually going in and deleting some anchor points in the outlines.  Do some experimenting on copies of the instances.  Might be a process of elimination.

  • Shape Builder tool

    Hey all!
    I am working on a logo that has an anchor in it. I drew the anchor myself using the pen tool, straight line tool, and eliptical tool. It appears that everything is smoothly connected and I have rounded out the corners of my anchor, and also put a round cap on my adjoining lines.
    I then highlighted the whole anchor and pressed cmd+J (I am working on a Mac) to join all the edges in an attempt to make the anchor one whole shape, which I intend to fill one solid color.
    However, when I use the shape builder tool, Illustrator does not recognize my anchor as one solid shape. When you hover your mouse over a solid shape, the Shape Builder tool has a dotted pattern inside your shape. This is not happening in my anchor. I painstakingly went over each "joint" and made sure that they were connected, with no avail.
    There has to be something I am missing here.. Anyone have any suggestions? They are much appreciated!
    Thanks in advance.

    Have you viewed it in the Layers Panel? This is the easiest way to see how many paths really exist.
    You could also convert the selection to a Live Paint object and then fill it with the Live Paint Bucket tool.

  • "shape builder tool" won't recognize colors

    Hey everyone,
    I am extremely new to illustrator and I have already run across a problem that has been frustrating me for days. When using the shape builder tool I used to be able to create shapes that retain the color of the shape I drag from. I have since done something to mess that up, now when I create shapes, my new shape has no color.
    I can get it to color solid colors but I really want it to recognize colors.
    Here is a picture of my settings if that helps.
    Thank you so much

    I've tried resetting teh AIPrefs and moving the folder, I thought I had the problem fixed at some points but I just can't get it to stay fixed. I just can't get "shape builder" to make new objects inherit properties of the old objects.

  • Shape Builder tool not working on shapes in a clipping mask

    Hello again,
    Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
    Thank's for answering,
    Lindberg

    Hi,
    Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
    Thank’s again for answering,
    Robert Marchand
    [email protected] <mailto:[email protected]>
    Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
    Shape Builder tool not working on shapes in a clipping mask
    created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
    If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • After using the clone tool my keyboard freezes up. Why?

    I am running Mac 10.6.8 and CS 5.5
    Photoshop: CS5.1
    After using the clone tool my keyboard freezes up. Why?
    When I use the clone tool repeadedly i can no loger use my keyboard.
    And that includes use for other applications.
    I have to do everything manually by scrolling down the menu bars.
    Also, I can't even type in any characters from the keyboard.
    Thanks everyone smarter than I.
    Vinny

    Thanks C,
    (Sorry I don;t know your full name.
    I followed your instructions and reset my preferences.
    Crossing my fingers.
    On another topic. I am running Design CS 5.5
    But when I checked "about Photoshop it only reads CS5 12.1 x64.
    Also, my prefs read CS5.1
    Please advise.
    I also seem to have prefs I may not need. I thought when I installed 5.5 my
    old Photoshop version prefs would be deleted but they are still there (see
    my snapshop of my pref files. Should I trash any?
    image: Inline image 1
    Thanks again C,
    Vinny
    On Wed, Jan 15, 2014 at 11:18 PM, c.pfaffenbichler <[email protected]

  • Photoshop just disappeared from my mac after using adobe cleaner tool.

    Photoshop just disappeared from my mac after using adobe cleaner tool. Can i somehow resurrect it to my mac?

    The cleaner remover Photoshop and cleans up thing the might have  been causing installation or updates problems so you have a clean slate.  Now you install Photoshop it should install correctly and update now.

  • After using various retouch tools, Aperture often returns to the original image and I can't get my retouched image back....any ideas?

    After using various retouch tools on an image, Aperture often (but not always) spontaneously returns to the orginal image and I have to start all over again.....this seems to happen most often after I use the clone tool.  Is this a new bug or what?  It just started happening a few weeks ago. 

    I fond the answer. Inexplicably,some of the song tracks, the 'deepest' files in the structure, had become hidden. There was no clear pattern - most of my music files come from CDs, with a small number of legal downloads (mostly from iTunes). So although the artist and album folders were not hidden, if there were no unhidden song files in the album folder, apparently iTunes skipped the artist.
    Changing the attributes of all music files to unhidden took care of everything.

  • In version 5, how do I use the selection tool to move objects?

    I can use the selection tool to select objects, but when I try to drag it, nothing happens. My workaround is to use the selection tool to select an object, and then use the transform tool to drag the object into its new position. Any help is greatly appreciated.

    is your object locked?
    Message was edited by: lilia@
    ... or perhaps your clicking on the content grabber?

  • Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

    Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

    You're welcome.
    There are a couple of issues connected to it:
    http://www.vektorgarten.de/problems-align-to-pixel-grid.html
    I don't think that list is complete

  • Hairlines between shapes after using the merge tool (Pathfinder)

    Hi all,
    I have this complicated camouflage like design made of all sorts of shapes but only using 5 colours.
    None of my elements have strokes.
    I selected all, and used the merge tool in the pathfinder (because I need to provide the document without any shapes overlapping).
    When you look close at the result you notice that there are white hairlines around every shapes.
    It's really a gap because If I slide a red rectangle behind the artwork, it appears in the hairlines.
    I read the other illustrator "hairlines" topics here but couldn't find a workaround to my problem.
    Thank you all in advance!

    If I untick Preferences>General>Anti-Aliased Artwork?
    The hairlines all magically disappear !
    Does that mean that it was just a screen artefact and they will not print?
    I had saved it as PDF but the lines where still showing in the PDF.
    But in Acrobat Pro if I's uncheck the smooth line art, they would disappear.
    Thank you so much Jacob!!!

Maybe you are looking for