Data Access Tab

How do you get the Data Access tab to show up with the Swing and
AWT components? I am trying to create applets that access
databases other then Oracle and am having difficulty getting it
connected. I do create a connection, but can't access it?
null

The name "Data Access" comes from previous
versions of JDeveloper.
The Data aware controls in JDeveloper 3.0 are
located in the InfoSwing and InfoProducers
tabs.
You are not missing anything.
-John

Similar Messages

  • Component palette without Data Access Tab

    I have installed JDeveloper 3.0. The Component palette has not the "Data Access" Tab. How can I add this tab and his buttons (database, QueryDataSet, ...)
    null

    The name "Data Access" comes from previous
    versions of JDeveloper.
    The Data aware controls in JDeveloper 3.0 are
    located in the InfoSwing and InfoProducers
    tabs.
    You are not missing anything.
    -John

  • Any one know how to use "custom" option present under the data access tab in XLS file format of Data Services

    Hi Experts,
            Any one know how to use or what is the purpose of "custom" option present under the data access tab in Excel workbook file format of Data Services
    Thanks in Advance,
    Rajesh.

    Rajesh, what is the Custom Protocol you are trying to use? It should be  something like PSFTP, etc.,
    Cheers
    Ganesh Sampath

  • HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

  • How to get Current Log in BO user name in data access driver

    In universe, to get the current log in user is via @Variable('BOUSER').
    Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
    Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?

    Shweta,
    The link you provided was the Auditor guide for BO 6.x, I'm not sure it that is going to help Karen or not.
    Karen,
    There is function called connection
    (usage:  =connection([Query Name]), where [Query Name]
    denotes the name of the tab for the query under Edit Query)
    Here is some of the output from connection:
    4;ODBC18;MS SQL Server 2000166; VERSION=7; USER=xxxxx;
    PASSWORD=; DBTYPE=Relational; DATABASE=xxx_xxxx;
    ODBC_USER=xxxxxx; ODBC_PASSWORD=; BO_DSN=xxxx_xxxx;
    BO_DRV_CONNECT_MODE=0; 224; VERSION=6; Name=xxxxx; Shared=4;
    LoginTimeout=600; Timeout=600; Pool Time=60; Array Fetch Size=10;
    Array Bind Size=5; RecommendedLenTransfert=1000; Password_Encryption=x;
    AliasTable=; MeasureDimension=; Hint=; ConnectInit=; ArrayFetch=1;
    I'm not sure if this info helps out either, being that connection provides info on a post-processing basis and it sounds like you need to get out ahead of the SQL generation.  The @variable('bouser') would seem like the place to be, however, in allowing custom SQL to take place you loose the bouser due to an individual could customize the SQL to the point that it gets unwantingly yanked out.  The end_sql might be your answer...
    Thanks,
    John

  • Custom field at Header level in Additional Data B tab of VA01/VA02

    Kindly help me out , I have a requirement to add a custom field at Header level in Additional Data B tab of VA01/VA02.
    Program: SAPMV45A
    screen 8459
    This can be done only through access key or not. Can any body tell me procedure to do that.
    Appreciate your response.Thanks in advance

    Please help me out this

  • How to debug an OLAP variant which is in Infopackage Data selection Tab

    Hi experts,
    How can I debug an OLAP variant used in the data selection tab for an infopackage? The loading is done via process chains. I am trying to debug the SAP delivered OLAP variant 0P_PPER3 of infoobject 0FISCPER3 (SAP exit). If I am not mistaken I believe the function module is RSVAREXIT_0P_PPER3. Thanks.

    Hi Mark !
    This method is always good (if you have authorization to work in SM50):
    put before your code an endless loop like this one:
    data flag type c.
    clear flag.
    do.
    if flag = ' '.
    exit.
    endif.
    enddo.
    then start your load...go to SM50 and here you will see your process looping on the same pgm...highlight the process and access into it in debug mode from the menu...
    here you can change flag in 'X', exit from the loop and continue all the process in debug !!!
    Hope it helps!
    Bye,
    Roberto
    ...and please don't forget to reward the answers...it's THE way to say thanks here !

  • Website needs Microsoft Data Access - Active X Data Objects

    I have a number of websites for work that are seem to be built around Internet Explorer. When I try to open them on my Mac at home with Safari, I get message that I pasted below.
    I'm thinking this might be related to the fact that when I open them on a PC for the first time it shows a similar message, but Internet Explorer prompts me to download and run "Microsoft Data Access - Active X Data Objects", and then it runs fine.
    Based on this I'm assuming it's a lack of these "objects" that are causing this problem. Is there any equivalent to these components for the Mac? Anything I can try to access these websites from my Mac? I've tried using Firefox as well, which has the exact same issue.
    Right now I've got to fire up my 2006 PC laptop to use Internet Explorer every time I need access to these sites. I realize I could install windows on my Mac with bootcamp and restart in windows every time I need access, but that seems like a waste just to visit 2 websites. Any advice?
    +"Scanning Required components...+
    +The user's Internet browser requires proper configuration to access our site. Read the following instructions on how to set up the browser properly.+
    +Active Scripting Configuration:+
    +Select Tools from the Internet Explorer menu bar.+
    +Select Internet Options ...+
    +Select the Security tab.+
    +In the Web Content Zone list, select «Internet».+
    +Click Custom level....+
    +In the Settings list, scroll down to the Scripting section.+
    +Check the Enable option under the «Active scripting» item and click OK.+
    +Click Yes to confirm the change in the security settings.+
    +In the Internet Options dialog box, select the «Local intranet» and repeat steps 5 to 8.+
    +Click OK to close the dialog box."+

    Hi,
    Try this...
    From your Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the develop menu.
    In the menu bar click Develop / User Agent.
    Try IE 8, 7, or 6.
    No guarantees but can't hurt to try. ActiveX requires Windows.........
    Carolyn

  • SID table in the general tab and master data/text tab

    Hello Bi Experts,
      For example 0material Info-object:
    There is a SID table in the general tab i.e /BI0/SCOMP_CODE
    There is another  SID table Attribute  in the master data/text tab i.e /BI0/XCOMP_CODE,here there are Nav attributes with name S__0COMPANY.
    When i got 0company info-object it got its own SID table i.e /BI0/SCOMPANY
    Can some body explain me what is significance of SID table Attribute  in the master data/text tab and what is difference with SID Table of attribute?
    Cheers,
    Stalin

    Hi,
    SID is surrogate ID generated by the system. The SID tables are created when we create a master data IO. In SAP BW star schema, the distinction is made between two self contained areas: Infocube & master data tables/SID tables.
    The master data doesn't reside in the satr schema but resides in separate tables which are shared across all the star schemas in SAP BW. A numer ID is generated which connects the dimension tables of the infocube to that of the master data tables.
    The dimension tables contain the dim ID and SID of a particular IO. Using this SID the attributes and texts of an master data Io is accessed.
    The SID table is connected to the associated master data tables via teh char key 
    Sid Tables are like pointers in C
    Tables Starting with  Description:
    M - View of master data table 
    Q  - Time Dependent master data table 
    H - Hierarchy table 
    K - Hierarchy SID table 
    I  - SID Hierarchy structure 
    J  - Hierarchy interval table 
    S  - SID table 
    Y  - Time Dependent SID table 
    T  - Text Table 
        F  - Fact Table - Direct data for cube ( B-Tree Index ) 
    E  - Fact Table - Compress cube ( Bitmap Index ) 
    For more info go through the belwo link
    http://www.sap-img.com/bw010.htm
    Regards,
    Marasa.

  • Info-object Maintenance -- Master Data/Texts Tab options

    Hello Bi Gurus,
    In BI 7.o:
    Path:
    Info-object Maintenance -->Master Data/Texts Tab -->Master Data infoSource/Data Taget/Infoprovider/Master Data Read Access.
    Scenario 1:
    1. Master Data Access - Own Implementation
       Name of Master Data Access -
    CL_RSMD_RS_SPEC     class for accessing generic Bw special info objects
    CL_RSR_XLS_TABF4     Table Master Data Read Class
    CL_RSROA_LOCAL_MASTERDATA     Master Data for Virtual Characteristics
    CL_RSMD_RS_BW_SPEC     Base class for accessing Bw special info objects
    CL_RSMD_RS_SPEC_TXT     Class for Accessing Generic BW-Specific InfoObjects
    Under what scenairo we go for this option?
    Any body used this option?
    Scenario 2:
    1. Master Data Access - Direct Access
       Name of Master Data Access - CL_RSR_REMOTE_MASTERDATA
    Under what scenairo we go for this option?
    Any body used this option?

    Hi,
    With Master Data:
    If you set this indicator, the characteristic may have attributes. In this case the system generates a P table for this characteristic. This table contains the key of the characteristic and any attributes that might exist. It is used as a check table for the SID table. When you load transaction data, there is check whether there is a characteristic value in the P table if the referential integrity is used.
    With Maintain Master Data you can go from the main menu to the maintenance dialog for processing attributes.
    The master data table can have a time-dependent and a time-independent part.
    In attribute maintenance, determine whether an attribute is time-dependent or time independent.
    With Texts:
    Here, you determine whether the characteristic has texts.
    If you want to use texts with a characteristic, you have to select at least one text. The short text (20 characters) option is set by default but you can also choose medium-length texts (40 characters) or long texts (60 characters).
    Helpfull link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/71/f470375fbf307ee10000009b38f8cf/frameset.htm
    Regards,
    Suman

  • Can't activate direct data access for VProvider

    I try to activate direct data access for BC VirtualProvider 0TR_CM_1. When I open "Activate Direct Access" dialog I don't see any assigned source systems in "Source Syst. for InfoSource 3.x" nor  any in "Data Transfer Processes" tabs. Does it mean what non of source systems don't have direct access data sources? Or in other words - why I can't assign any source system for the BC VProvider?

    Hi,
           While creating datasource there is an option for direct access.This option  shows if the DataSource supports direct access to data.
    A RemoteProvider in BI can only get data from a DataSource that supports direct data access.
    It is only useful to access data directly if the quantity of data to be extracted can be restricted to a suitable selection.
    Hope this helps
    Regards
    Karthik

  • SQL Developer 4.0.0.13.80 only Access tab is visible in Connections

    I have installed this release carefully using the instructions provided, migrated my 4.0.0.12.84 setting, and it seems to work correctly.  However, when I go to add a Connection, only the Access tab is visible.  My existing connections which extensively use tnsnames.ora all work as expected but I cannot add or modify an existing Oracle DB connection (or anything other than Access).  I removed and repeated the install with the same results.  I have then completely removed the existing install, removed the settings folder in my roaming folder, uninstalled/reinstalled JDK 1.7.0_51, reinstalled 4.0.0.13.80 and NOT migrated settings to get to a virgin install; unfortunately, the same situation exists (even after mapping the tnsnames.ora file in the Database>Advanced setting location.  This is the eleventh release I have installed/used without this error, so I am looking for guidance in removing this roadblock from the community...any suggestions?

    I can reproduce my problem even after I switched SQL-Developer to English language by setting  "AddVMOption -Duser.language=en" in sqldeveloper.conf
    I'm using the 64-bit Version of SQL-Developer with JAVA 1.7.0_40. My OS is Windows 7, standard date format in SQL-Developer is "DD.MM.YYYY hh24:mi". I opened a simple table in an Oracle 11.2.0.3 database and tried to change a date value with the date picker from '01.01.2012 00:00' to '10.01.1975 00:00' but the result, that I got is '10.01.1974 00:00'!

  • Failed to open the console and System Center Data Access Service wont start - SCOM 2012

    Log Name: Operations Manager
    Source: Data AccessLayer
    Event ID: 33333
    Data Access Layer rejected retry on SqlError:
     Request: ManagementGroupInfo
     Class: 16
     Number: 208
     Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
    =============================================================
    Log Name: Operations Manager
    Source: OpsMgr SDK Service
    Event ID: 26380
    The System Center Data Access service failed due to an unhandled exception.  
    The service will attempt to restart.
    Exception:
    Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
       at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    =============================================================
    Failed to connect to server ' xxxxx'
    Date: 16/09/2013 20:36:16
    Application: Operations Manager
    Application Version: 7.0.8560.0
    Severity: Error
    Message: Failed to connect to server 'xxxxxx'
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
    The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724.  ---> System.Net.Sockets.SocketException: No connection could
    be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
       at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
    refused it xxx.xxx.xxx.xxx:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    =============================================================
    Log Name: Operations Manager
    Source: OpsMgr Root Connector
    Event ID: 28001
    The Root connector received an exception from the Config Service on StateSyncRequest:
    System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
    Server stack trace:
       at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
       at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
       at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
    ================================================================
    Log Name: Operations Manager
    Source: OpsMgr Management Configuration
    Event ID: 29105
     The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
     Operations Manager database version: 1.0.0.0
     Minimum required version: 7.0.0.0

    Yes, i change the credentials, but doesnt work.
    Yes, i put the events in the
    main question!
    Events Logs:
    =======================================================
    Log Name: Operations Manager
    Source: Data AccessLayer
    Event ID: 33333
    Data Access Layer rejected retry on SqlError:
     Request: ManagementGroupInfo
     Class: 16
     Number: 208
     Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
    =======================================================
    Log Name: Operations Manager
    Source: OpsMgr SDK Service
    Event ID: 26380
    The System Center Data Access service failed due to an unhandled exception.  
    The service will attempt to restart.
    Exception:
    Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
       at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    =======================================================
    Log Name: Operations Manager
    Source: OpsMgr Root Connector
    Event ID: 28001
    The Root connector received an exception from the Config Service on StateSyncRequest:
    System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
    Server stack trace:
       at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
       at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
       at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
       at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
    =======================================================
    Log Name: Operations Manager
    Source: OpsMgr Management Configuration
    Event ID: 29105
     The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
     Operations Manager database version: 1.0.0.0
     Minimum required version: 7.0.0.0

  • I cannot find all my installed apps on the "use cellular data for" tab on the settings menu.

    I have a new iphone 5s and on the first day I've received it, I updated to IOS 8.0.2.
    Today, I've decided to turn my cellular data on and, in order to consume less data, I thought I would disable some of the apps. However, only a few were available/visible on the "use cellular data for" tab. However, when, with the cellular data turned on, I opened a missing app on the phone, it would start to appear on the list (where it wasn't previously). Also, when I go to the app on the settings menu, it would not have shown the option, "use cellular data" before I've opened the app and now it does. Do I need to turn on every single app before I can select my cellular data preferences? I know people with the same phone and their apps appear all, as expected.
    I don't know if this is a problem of my own carrier but I don't think so, because the people I mentioned earlier have the same carrier.
    Any help would be appreciated.
    Thank you.

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
    If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

Maybe you are looking for