Data collection for cost object hierarchy - no data at order level!

Hi everyone,
When using transaction KKP6 to see my hierarchy for cost object, the system displays all the values that are allocated on my hierarchy nodes, but I do not have the values that should come from the production orders (repetitive manufacturing with production version).
I use transaction KKRZ to collect data for cost object hierarchy, but it seems that the system does not retrieve any information from the orders.
Would someone know about this point customizing steps to follow to retrieve my orders values?
Thanks in advance for your answer. Rewards guaranteed!
Ronan

Hi Amadeus,
To do so, I have used transaction OKZ5 in the customizing and ticked "always cost object hierarchy" and "distribution".
By doing so, you enable the system to distribute costs within a cost hierarchy. Otherwise the system will only determine costs on the hierarchy.
Try this, it may work for you as well. During your period-end closing, you sould now use "cost object hierarchy" instead of product cost collector.
Regards,
Ronan

Similar Messages

Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redunda

I understand the charter on this is to "check-in" once every time the program is turned on, and then once every 6 hours after that, or, once every 24 hours presumably. But the phone-home-effect is over-stepping these basic parameters. If a user turns their browser off and then on, Firefox is still obligated to "check-in" even if it just checked in 3 minutes prior. If the coding is not pre-designed to overstep, or act excessively in a redundant focus, the instance of once every six hours or once every 24 hours, is still overmuch if a user has been doing this (non-voluntarily-participating) for 9 months or longer.
== This happened ==
Every time Firefox opened
== This started when Firefox took up the initiative of "improving service. to end users" or similar idea, making the web safer for novice users, etcetera.

Opening question was truncated. Should read: "Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redundancy here. It would seem the practice of "improving service" has been accomplished with as much information as Mozilla has gathered in the last 6-18 months about its users habits. '''Isnt it about time to give users the option to opt out of that now that most the heavy liftiing has been accomplished?'''"

What is the data dictionary for direcoty objects?

Dear All,
I would like to know the data dictionary for directory objects. Or where i can get more details of directory objects.
Thanks in advance
Balaji

Hi,
YOu can use dba_directories view to get info about directory.
For other views
1.select * from tab where tname like '%DIRECT%';
2.select * from dictionary where table_name like '%DIRECT%';
Regards
Jafar

The performance of Distribution of Cost Object Hierarchy Costs.

Dear SAP Gurus.
I am checking the function and the performance about Cost Object Hierarchies distribution with Control Through Variance Key.
The number of production orders assigned to COH is about 100,000 per month.
All orders will be closed at current month and new 100,000 production order will be assigned to COH at next month.
My concern is about performance of Distribution of Cost Object Hierarchy Costs
because a huge number of orders will be accumulatedly assigned to the Cost Object Hierarchies.
I think that the COH will be distributed with not bad performance.
(Actually I want that to be OK.)
What's your opinion about that?
Sincerely.
Mahnkwi.

Hi Mahnkwi,
Sender-/receiver-relations should definitely be below 1:1000 or even below 1:500. This depends on other factors like general size of the hierarchy and data to be processed as well. This hierarchy needs to be restructured. In case you do this the
distribution needs to be reversed first.
Below are some other hints on performance in KKPX
- Parallel processing should be used.(note [386508|https://css.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000386508])
- Switch off detail lists since the consume lots of memory.
- Old orders should be archived.
Note [77718|https://css.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000077718] also explains tips to avoid the memory error for transaction KKPX or KKPY. As note explains, you should consider
whether a distribution of the cost elements according to their origin is required; if not, the corresponding indicator should not be set in the costing view of the materials.
If many error message is issued in the error log, this may have bad effect on the memory of your server. In this case, you should make these error message "not to be displayed" by message control in IMG.
Regards,
Declan

Trx KKPHIE: assigning single objects to cost objects hierarchy through BDC

Is there a way to assign single object to cost object hierarchy.
The ALV TREE button "Assignmnet single objs on/off" does not seem to trigger an OKCODE since it is managed in the abap object (class).
Is there is way to make a BDC. Or other ways to enter that data in BG, like a BAPI.
- Tried the BDC recorder without success
- Did not find a BAPI
- Did not find anything interesting in SWO1 business object BUS2076.
Any clue ?

Ok, we found the solution. Simply use the old transaction "KKP2" instead of "KKPHIE"

Error in Distribution of Actual cost in Cost Object Hierarchy

Hi,
I am getting an error while doing the Distribution of Actual cost from Cost Object Node to the assigned Order.
Cost element/origin 630000 could not be distributed
Message no. KZ468
Diagnosis
The cost element/ origin 630000 could not be distributed because there are no target costs for this cost element/origin or for cost element group CO-PC-TOT.
Procedure
Check the calculated target costs and cost element group CO-PC-TOT assigned to the target cost version.
Procedure for System Administration
Proceed
Although the Cost element is Present in cost element group CO-PC-TOT.
One more information, the order that is assigned in Cost Object Hierarchy is of CO-Product orders.
I have searched in the forum but I havent got any solution.
Kindly help.
regards
Kami

Hi,
Concerning error message KZ 468, it has the following origin: In the customizing of the cost object category (transaction okz5), check if the 'single object selection' is set to 'Control through variance key'. If you consider the F1-Help for this option you will find the following explanation:
if the indicator Control through variance key is turned on, the production order, process order, or product cost collector can only be assigned to the cost object hierarchy if:
-> The material is assigned to the lowest node of the hierarchy
-> No variance key is specified in the order
The important point is, that orders that have a variance key are excluded from the cost distribution.
In transaction KKF8 you will find that all these orders do indeed have a variance key. Hence, all of these orders are included, there are no target costs from the orders and the costs cannot be distributed. Thus the error message kz 468.
Please consider that and check the customizing again.
Not having target costs in the distribution indicates either a wrong set up of the hierarchy or, more likely, no valid cost estimate for a certain material of a production order or product cost collector could be found.
Did you check whether for this cost element/origin target costs exist, and also for the cost element group? If not the message KZ468 is correct and probably the cost element group has to be maintained properly.
The distribution of actual costs calculates target costs on-the-fly and the variance calculation does not have to be carried out before. Quite the opposite than the variance calculation requires the distribution as a preceding step. Furthermore it is not sufficient that one cost element is in a cost element group but the interval where the cost element has been assigned to has to have some target costs. Otherwise this won't work and message KZ468 is issued.
regards
Waman

BAPI/IDOC to create cost object hierarchy or category

Hi,
Can any one give me the BAPI or Basic type to create cost object hierarchy(tcoce KKPHIE)
Kind regards,
Sujith

Hi,
Following are the BAPIS
1079
BAPI_COSTOBJECT_GETDETAIL
BAPI_COSTOBJECT_GETLIST
BAPI_COSTOBJNODE_GETDETAIL
BAPI_COSTOBJNODE_GETHIERAR
BAPI_COSTOBJNODE_GETLIST
Hope this Helps
Thanks
Ravi

Mass Material Assignment to Cost Object Hierarchy

Hi,
I have to assign the materials to Cost Object Hierarchy. I know that it is done thorugh TC- KKPHIE.
But if I have to assign more than 1000 materials at a time , I cannot do that in mass.
I tried to do it thorugh LSMW. The system is not allowing it to create LSMW.
I am stuck. Please let me know is there any other method of material assignment in mass.
Or any other transaction code.
Hoping to hear

Hi Ravi,
I have tried using LSMW and BDC. Its not working.
Is there any other transcation of material Assignment to Cost Object Hierarchy.
regards
Kami

Assignment of Materials to Cost Object Nodes in Cost Object Hierarchy

We have defined a Cost Object Hierarchy. In the Cost Object Hierarchy , there are multiple cost object nodes. These cost object node represents each Prodcution line.
There is a requirement that any material can be produced in any production line.
The issue I am facing is if I am assiging one material to one Production line, and again if I am trying to assign the same material to other production line, the system is not allowing me to assign it.
How Can I resolve this issue.
kindly help.
regards

Hi
Ideally, each prod line should be represented by a Production Version in PP... You can assign a combination of Material + Prod Version to each Cost Obj Node... You cant assign just a Material No to more than 1 node
The Prod Version Field might appear in Grey Mode.. But, it will allow you to select the Prod Version in that Field....
You can also use BADI workorder_update to check while creating production order that the Prod Version being used in the Prod Order must be assigned to Cost Obj Node... Cost Obj Nodes are stored in the table CKPE
br, Ajay M

Costing affect with MRP at planned order level and after production order

Dear all,
How the costing affect with MRP at planned order level and after production order completion?
Edited by: Maulik on Jun 24, 2009 1:59 PM

Dear Maulik,
check Mr. Vinod's inputs abt costing
1. Maintain following master data:
MM01 Material Master with Costing and accounting view. Make sure all the cost Std, Moving avg etc is maintained along with valuation class in Accounting view 1. In costing tab pls make sure "with qty structure" and "Material Origin" are ticked.
CS01 BOM with components marked with costing relevance in Status/Long Text Tab. Also check all the qty are correct.
CR01 Work Center in Basic data tab maintain standard value key sau SAP1 and in costing tab maintain the workcenter, activity type and formulas (Usually standard formulas like for Machine Hours SAP006, Labour SAP007, Setup Activity SAP005 is used).
KL01 Cretae activity types, in basic data tab maintain ATyp Category AS "1" and cost element (as provided by your FI Guy).
KP26 Activity pricing, here with the combination of Activity type and the cost center you assign price to the activity.
2. SPRO Activity
Maintain Costing sheet IMGControllingProd cost controllingProd Cost PlanningBasic settingoverheadsdefine costing sheet.
OKKN Define costing variant, you define costing type (In the costing type, you define the purpose of a material cost estimate by specifying, for example, which field in the material master record the costing results can be transferred to like std price, moving avg etc), Valuation Variant (defines how the prices are prioratized), date control and transfer structure.
3. Costing Process Flow:
1. CK11N CREATE COSTING RUN
2. CK24 CREATE PRICE UPDATE (You Mark and release the prce to be updated)
4. COSTING VARIANT WRT PP
1. OPL1 DEFINE COSTING VARIANT WRT PP
2. OKK4 or OPN2 DEFINE VALUATION VARIANT
3. OKK1 or OPM1 DEFINE COSTING TYPE
4. OPL8 ORDERTYPE DEPENDENT PARAMETER (assign the above creted costing type for both planned and actual)
Hope this will throw some light on product costing.
Regards
kumar

Data Authorization for info-objects

Dear Experts,
We have designed a query in costing displaying the plan and actual costs by cost center. Our requirement is that that users shoul be able to see only those cost centers in the query which are relevant to them? How can I acheive this without creating multiple queries?. Is there any authorizatin abject that I can use for this purpose?
Regards
Suneeth

Hi,
Pls check the below
Data Warehousing Workbench u2013 objects/S_RS_ADMWB
Authorizations for working with individual objects of the Data Warehousing Workbench. In detail, these are: source system, InfoObject, monitor, application component, InfoArea, Data Warehousing Workbench, settings, metadata, InfoPackage, InfoPackage group, Reporting Agent settings, Reporting Agent package, documents (for metadata, master data, hierarchies, transaction data), document store administration, (Customer) Content system administration, broadcast settings.
Data Warehousing Workbench u2013 InfoObject/S_RS_IOBJ
Authorizations for working with individual InfoObjects and their subobjects.
Until Release 3.0A, only general authorization protection was possible using authorization object S_RS_ADMWB. General authorization protection for InfoObjects still works as in the past. Special protection using S_RS_IOBJ is only used if there is no authorization for S_RS_ADMWB-IOBJ.
Regards,
Marasa.

Problem setting up data collection for a performance problem

We have a performance problem on our production environment: there is a query that is long to display specially on specific records involving a lot of détails. I had the idea to set up data collection to investigate the problem.
I used the wizard to set up data collection with default settings.
I had created a database PERF_DW on our test server for that purpose.
I didn't have any problem with the wizard: it created data collection sets and SQL Server agents tasks and probably many objects. But I don't know where I missed something but I didnt, have the chance to specify the database I wanted to tune
and even when I started data collection, I couldn't figure out where were the reports.
Then I tought that I did it all wrong so I stopped data collection and dropped the database and tried to deleted the jobs created and I had the following message:
TITRE : Microsoft SQL Server Management Studio
Échec de Supprimer pour Travail « collection_set_1_noncached_collect_and_upload ». (Microsoft.SqlServer.Smo)
Pour obtenir de l'aide, cliquez sur :
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.2100.60+((SQL11_RTM).120210-1917+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Supprimer+Job&LinkId=20476
INFORMATIONS SUPPLÉMENTAIRES :
Une exception s'est produite lors de l'exécution d'une instruction ou d'un lot Transact-SQL. (Microsoft.SqlServer.ConnectionInfo)
The DELETE statement conflicted with the REFERENCE constraint "FK_syscollector_collection_sets_collection_sysjobs". The conflict occurred in database "msdb", table "dbo.syscollector_collection_sets_internal", column 'collection_job_id'.
The statement has been terminated. (Microsoft SQL Server, Erreur : 547)
Pour obtenir de l'aide, cliquez sur :
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3128&EvtSrc=MSSQLServer&EvtID=547&LinkId=20476
BOUTONS :
OK
Now I understand that the collectors prevent the jobs from being deleted but I can't delete the collectors.
What should I do?
Any help is appreciated.
Thank you for your advice.
Sylvie P

Hello,
Please refer to the following article.
http://blogs.msdn.com/b/sqlagent/archive/2011/07/22/remove-associated-data-collector-jobs.aspx
You can run the dcclenaup.sql script mentioned in the article.
Another option is using sp_syscollector_cleanup_collector.
http://blogs.msdn.com/b/sqlagent/archive/2012/04/05/remove-associated-data-collector-jobs-in-sql-2012.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Table for cost center plan/actual data

Hello gurus,
What are the tables to get for cost center wise plan/ actual data? The data which was entered through KP06 was sitting in whcih table?
regds
ramachandra

Hello Ramachandra,
Actual and Plan Data can be found in COVP view.
1) For Actuals, you should use the values 04 and 11 to the field WRTTP;
2) For Plans, you should use the values 01 and 10 to the field WRTTP.
If you need to get the totals, you should use tables COSP and COSS.
Hope this help you.
Cheers,
Daniel.

Implementing Data Search for Custom Objects

Can any one have some information on implementing search criteria for custom objects.
I am looking to modify the drop down values and search criteria based on custom data model.

Hello Rajesh,
The following configuration activity might resolve your query.
Transaction: mdgimg.
General Settings> UI Modelling> Define Field Properties for UI. Select your custom data model and go to "Hide Field Names."
For the fields of the entity type, you don't want to come up in the search UI, check on "No selection".
"No Selection" : These wouldn't come up as search Criteria. "No Results List": These won't come up in final result list.
Best regards,
Shephalika.

Problem setting data collection for SLD

Good day
I have the following situation.
A Solution Manager 71 installation, just recently patched to SP11. Previously I had the SLD on this system. And then a colleague informed that this could be a problem in the future as my ECC systems are Basis 731 which is higher level than the 702 on the Solution Manager system. So I installed a separate Java stack system on the same server as the Solution Manager.
The problem that I am faced with now is that I cant get the data collection (RZ70) to connect with the new Java system that I have installed. When I go into SLD and Administration, I see under Details>Data Suppliers that the server is specified as the Gateway Host, with a Gateway port of 3303. On the Solution Manager system it specified the gateway host as "localhost" and the gateway port as sapgw00.
So, from RZ70 I specify the gateway service as sapgw03 and then I get the result:
0: DSIMSID001_SID_00
: Collection of SLD data finished
0: DSIMSID001_SID_00
: Data collected successfully
0: DSIMSID001_SID_00
: RFC data prepared
0: DSIMSID001_SID_00
: Used RFC destination: SLD_NUC
0: DSIMSID001_SID_00
: RFC call failed: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
0: DSIMSID001_SID_00
: Batch job not scheduled
And from the SLD_NUC entry in SM59 I get
Logon    Connection Error
Error Details    Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
Error Details    ERROR: SAP gateway communication error (Is SAP gateway closed?)
Error Details    LOCATION: SAP-Server DSIMSID001_SID_00 on host DSIMSID001 (wp 1)
Error Details    COMPONENT: CPIC
Error Details    COUNTER: 47
Error Details    MODULE:
Error Details    LINE:
Error Details    RETURN CODE: 239
Error Details    SUBRC: 0
Error Details    RELEASE: 721
Error Details    TIME: Mon Mar 16 14:04:05 2015
Error Details    VERSION:
Can anyone give me a few ideas what may be wrong here please?
Regards
Ray Phillips

Hi Ray,
Please check if the below SLD configuration is done.You can use any one of the two below link depending on how you want to configure your SLD.
Configure SLD for JCo and Creation of JCo Destinations - Portal - SCN Wiki
or
How to Create & Configure Local SLD on SAP NetWeaver 7.3 AS Java after Installation
If your SLD server is not a local SLD then make sure that in both the SLD system and the remote system host fine entry is there in /etc/hosts and etc/services.

Data collection for cost object hierarchy - no data at order level!

Similar Messages

Maybe you are looking for