Data does not show for forms created in 6.0 Pro, in 8.0 Pro and 10.0 Pro

Greetings...
Our company have several forms created using Acrobat 6.0 Pro.  We upgraded to 10.0 Pro, and noticed that the forms do open, with NO data (that was entered using 6.0 Pro).  We downgraded to 8.0 Pro, with the same result.  These fillable forms show up in 8.0 and 10.0 as blank forms (as though there was no data entered in the fillable fields!).  If you encountered this, and found a work-around, please post...   Thanks.

We used Acrobat 6.0 Prof, to fill in the forms (fillable fields). We received the forms from Los Angeles County.  

Similar Messages

  • WT /411, /311 and 711 does not show for Form 940 credit reduction

    I'm facing issue in form 940 credit reduction schedule A, In the payroll log I do not see /411, /311 and /711 wages types.  Tax type 10 and 11 are there in tax model and also in BSI tax authority is there in Optional Rates Override.  Please advise what I'm missing.
    Thanks,
    Anita

    Hi Anita,
    As a base rule, state tax type 11 is to compensate FED tax type 10, hence wherever you see tax type 10 assigned in FED tax combos against all tax classes, tax type 11 needs to be made available under same tax classes but for state.
    Anyways, what you need to do is that -
    1. Go to table T5UTD and see what all states have tax type 11 active for it and note it down.
    2. Once done, you will need to look at FED tax model in table T5UTM and what all tax combos under tax area "U" have tax type 10 for tax class (which corresponds to your processing class 71 specifications). Note the tax classes that have tax type 10 under FED tax model.
    3. Finally got each state that you have found as tax type 11 is active under step 1 from table T5UTD and for respective tax classes that you found from step 2 under FED model, look for same tax classes in each of state applicable and add tax type 11 under table T5UTY for tax combos found in table T5UTM against those tax classes for state tax model. Please make sure that if tax combos are shared across or used by different other tax models than create a new model replicating existing one and add tax type 11 to it, then assign same to tax model agaisnt taht tax class and tax area "U".
    Example:-
    You have found out that MI (Michigan) has tax type 11 active under T5UTD table but it does not come in your payroll log.
    Suppose FED has tax model 100 assigned under table T5UTE.
    Now this 100 tax model in table T5UTM has tax class 2 which has tax combo assigned as 40 against tax area "U".
    Tax combo 40 in table T5UTY has tax type 10 only.
    Go to Michigan tax model in table T5UTE, suppose it was 120.
    Go to table T5UTM and look for tax model 120 and tax class 2. Suppose tax combo assigned is 43 against tax area "U".
    Tax combo 43 in table T5UTY has tax type 10 only but since FED has tax type 10 assigned to tax class 2 therefore MI combo should also have tax type 11 in tax combo 43.
    This change to tax combo 43 applies if tax combo 43 is only avaiable under tax model 120.
    If tax combo was also used for other tax model then you will need to copy create 43 to other new tax combo number not used till date and copy all tax types under it.
    Note:-
    Here I have only told you about one tax class i.e. 2 and one state MI. You will need to configure same for all tax classes as applicable for MI and other states too.
    Thanks,
    Ameet

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • We have a DVD in the super drive that will not eject.  The DVD does not show up on the desktop.  Have tried the keyboard eject button, and also restarting the computer.  Any ideas on how to eject it?

    We have a DVD in the super drive on our Macbook Pro that will not eject.  The DVD does not show up on the desktop.  Have tried the keyboard eject button, and also restarting the computer.  Any ideas on how to eject it?

    here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801.  Hope this helps

  • I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

    I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
    iMac and Mac Pro
    Thanks

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • Oracle apps Data does not show in Discoverer

    When running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record. Anyone knows how to handle this?

    Hi,
    There can be many reasons why a Discoverer report does not return data, but I don't think it will be because the session is not apps initialized. Check that the language has been set correctly, using the calculation userenv('lang').
    As I don't know anything about your environment, it is a bit hard to guess what else might be causing this issue. Is there anything different about this report? What is the custom query that you are running?
    Rod West

  • My ICal data does not show up on Subscribers Calendar

    Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
    Any thoughts.
    Thanks Mark

    Thanks for the information.
    If you view the same calendar on the MobileMe website, do you see the events?
    http://ical.me.com/yourmembernamehere/calendarname
    If you don't see the events on the calendar web page then the publish did not go through succesffully.  Un-publish the calendar, make a slight change to its title, and then re-publish and test.
    If you do see the events on the website but still not in iCal on the 10.6.8 system:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Remove the subscription for iCal to that specific calendar.
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    4. Launch iCal and re-add the subscription.
    Hope that helps!

  • Background does not show up when creating a PDF in InDesign

    I have placed the same image in Illustrator and the PDF does show up the image.

    Ooh. Ok. Thank you! I'm using InDesign CS5.5, Acrobat 10.1.6. Mac OSX (10.6.8).
    Layer 1: background (TIFF): does not show up
    Layer 2: Type and logos (EPS): do show up in my pdf.
    -When I select Overprint Preview in Indesign the background is missing.
    -I have created pdfs in different presets (smallest, high quality, etc) and still background does not show up.
    -When I place ONLY the background on a new InDesign document, it does show up in the PDF.
    -I have created a pdf with the background in Illustrator and it does show in my PDF.
    Thanks!

  • Creating a custom role does not show up whe creating a user

    On portal 10.1.4 I have followed the directions in 10.1.4 Oracle Server Portal Configuration Guide.section 6.1.6.9.1 Example: Defining a User Administrator Role.
    However, the newly created role does not show up when I create a new user.
    Any suggestions?

    This is a bug in 10.1.2.0.2. It works if you create the group from the directory page OID

  • Meta data does not show up in Illustrator

    Metadata added in Bridge does not show up in the file info in illustrator right away. You need to import XMP to have the metadata in the illustrator file.
    I have about 10.000 files, is there and easy way of getting the Metadata (keywords mostly) into the files?

    Probably should post in the Illustrator Froum.

  • HT1688 How do you set up photo streaming to your home computer/windows?  My computer does not show an iclod icon when I go to the control panel/network and internet

    How can I set up icloud phote streaming to my home computer? 
    When I follow their directions my comuter does not show the Icloud icon uner the control panel / netwrok internet

    http://www.apple.com/icloud/setup/pc.html
    To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).

  • Error for Budget exceeded for Network does not show up while creating PR.

    Hi SAP Gurus,
    We have an issue while creating a purchase Requisition from Network. When we enter the Toatal Amount in the PR and if the total Amount is greater than the total Budget for the Network, the error "For item 001 Ntwk actvty XXX &  WBS element XXX budget amount XX USD exceeded " is not showing up in the foreground by the system and hence not able to create PR. It seems that while trying 30-40 times, the system will show this error in the foreground once or twice only and we want this to be appears in the foreground consistently. Can you please advice how to fix this? Thanks,
    Reagards,
    Imran.

    Hi,
    you need to maintain sufficient budget in respective WBS element by using transaction CJ30 and by releasing budget through CJ32.
    Check the budget availabilty in report s_alr_87013558.
    It will resolve your issue
    Regards,
    Sandesh Sawant

  • GPS data does not show up in mobileme gallery or exif info of exported pics

    Hello,
    I used places to geotag some of my pictures.
    That went nicely, and I now have Latitude and Longitude Metadata entries
    in the exif part of the metadata displayed by Aperture.
    However, when I export these pictures to JPG, this information is gone;
    the metadata of the exported pic does not contain latitude/longitude information.
    Likewise, when publishing these pics to mobileme, no gps information is found in the
    "information" part.
    How do I write the gps data to the picture such that exports contain it and mobileme will display it?
    (Aperture 3.03)

    Similar to bjrnfrdnnd2, I have the 'Include location info in exported photos' button selected all the time in the Export Preferences. Unlike him however, the GPS information developed using Places (lat & long) does not get exported when I export photos. It is not present when I reimport the photo back into Aperture, nor does it show up in Preview when I examine the file using Inspector in the Tools menu (I export the Master File).
    Interestingly, if I export a photo from iPhoto with the include location info box checked, the GPS info does import into Aperture without problem AND, most strangely, will also export with the GPS information regardless of whether the 'Include location info in exported photos' is selected in the preferences or not. The same thing happens if I import a geotagged photo from my iPhone into Aperture; that is, the GPS information gets exported regardless of what the Preference setting is.
    Exactly the same thing happens on my MacBook.
    I've checked my disk for problems using DiskUtility, repaired the Aperture Library, tried using a new library and also deleted the Aperture preferences file and created a new one. All to not avail.
    All I can conclude is that depending on how the GPS data are input into Aperture (as part of a photo that is imported or as determined within Aperture using Places) the information is stored differently and so is attached (or not) differently to exported photos.
    Has anyone else experienced this issue or does anyone know what might be wrong here?
    Thanks

  • Plan Data Does Not Show in FI Report

    I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029.  I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report.  Is there some transfer transaction I am missing? 
    Thanks
    David

    I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table.  This report brings in all of the primary cost element postings as well as the secondary overhead postings.  This provides a much more holistic view of FICO reporting.  I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption.  This special section for orders should be zero if everything is settled to either WIP or variances.  Otherwise I see a order related settlement problem on the face of the income statement.  I found there was a slight problem with the secondary postings between the cost center and order.  I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
    Once I haad the actual postings working, the next problem was that no plan data was coming to the report.  I had to work through many details to finally get the plan data to come through, but now it works as designed.
    Juggler

  • Custom ribbon button does not show for a Tasks list

    I created a simple app using Visual Studio 2012 to add a custom ribbon button for a tasks list. After deploying the app to the SharePoint online, the button does not appear on the ribbon. The exact same button gets displayed properly
    when added to the ribbon for a custom list.  The elements file with the location of the button gets generated, so I can't imagine it would be wrong, but just in case, this is what I have:
    <CustomAction Location="CommandUI.Ribbon"....
    <CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">...
    Any help is greatly appreciated.
    One more thing, if I add this button using SharePoint Designer 2013, the button does not get displayed either. I have a feeling it might be problem with the Tasks list?
    Thanks

    Hi Danny,
    The button needs to be displayed only for one specific list. And as I mentioned, the elements file for the ribbon button was generated by VS, here is the content:
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomAction Id="02aa4c3b-bb73-4dfa-989c-d63a9591dcee.RibbonCustomAction" RegistrationType="List" RegistrationId="{$ListId:Lists/Projects;}" Location="CommandUI.Ribbon" Sequence="10001" Title="Create Project Site">
    <CommandUIExtension>
    <CommandUIDefinitions>
    <CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">
    <Button Id="Ribbon.ListItem.Actions.RibbonCustomActionButton" Alt="Create Project Site" Sequence="100" Command="Invoke_RibbonCustomActionButtonRequest" LabelText="Create Project Site" TemplateAlias="o1" Image32by32="_layouts/15/images/placeholder32x32.png" Image16by16="_layouts/15/images/placeholder16x16.png" />
    </CommandUIDefinition>
    </CommandUIDefinitions>
    <CommandUIHandlers>
    <CommandUIHandler Command="Invoke_RibbonCustomActionButtonRequest" CommandAction="~remoteAppUrl/Pages/Default.aspx?{StandardTokens}&SPListItemId={ItemId}&SPListId={ListId}"/>
    </CommandUIHandlers>
    </CommandUIExtension >
    </CustomAction>
    </Elements>
    If the same button is added for a custom (not a Tasks) list, the button shows up fine.
    Thanks

Maybe you are looking for