Data doesnt Display at Query level

Hi All
i hv executed a query which hs costlement,costcenter,profitcenter as master data, these master data’s show complete data when I c their contents individually thru maintain Master data,, but in query the data is shown only for a few records, i.e ex I hv 1000 costelements in Master,,but in query I just c around 700 and their corresponding Transaction data. Is it something like Only Records which hv Transaction data are shown up,, and other s not displayed,??,,Pleas advice
Thanks

Hello,
If you load master data, then SIDs are generated for the same. Now when you laod transaction data and ur DTP has setting load data even if no master data exists, then even if there is no master data it will update the master data and correspondig SIDs will be generated.
So generally, SIDs are generated for all the active master data but only the data that is present in the cube or DSO is displayed.
Regds,
Shashank

Similar Messages

  • Time dependent Hirerachy data not display at query level

    Hi all,
    I have loaded a time dependent hirerachy from flatfile,it showing same data as in flat file at RSMO,where as if I am executing query ,report displaying in hirerachy structure format,but DATE-TO and DATE-FROM are not displaying .
    Ex:On ZEMPLYOE i have created ZMANAGER as hirerachy,report giving ZMANAGER&ZEMPLOYEE details correctly in hirerachical format,but Date-to and Date-from are not displaying at report level,where as entair data is loaded to ZEMPLOYE without any error.
    If any one has come across the same situation,what are additional steps need to have take.
    your help will be appreciated
    Regards,
    Praveena.

    Yes, date-from and date-to are not meant to be displayed in the report.
    Let me take an example to tell the purpose.
    Suppose your hierarchy displays employees managerwise.
    If you create hierarchy telling
    from 01-01-2009 to 31-03-2009, employee E1 will report to Manager M1
    from 01-04-2009 to 31-05-2009 , E1 will report to M2.
    then, until March, E1 will be displayed under M1 node in the report, and in April and May, he will be displayed under M2 node.
    So, we create hierarchy only once, but they change in the report depending on the month.
    Hope this helps.

  • Conflict between Date values at Infocube & Query Level

    Hi Folks,
    I am stuckup with a strange situation and it is:
    The value of date fields are coming correctly at infoprovider level and when i call the same infoprovider at query level the values are totally different.
    Any suggestions in this regard.
    Thanks

    Hi,
    Are you using the same user for running the query and for checking data in InfoProvider, otherwise there might be personal settings difference.
    Execute your query in RSRT and check the output.
    Regards,
    Durgesh.

  • Output display at Query level

    Hello,
    Could you plz suggest us the way to display data for cumulated to current fiscal year/period, current fiscal period of the last year and fiscal period wise for the past one year (ex offset 0FPER-12;0FPER) respectively row wise.
    Thanks in advance.
    Naveen
    Email:[email protected]

    Naveen,
      there are two ways to generate the report. 1. as Sampath said earlier using Offsets 2. Using Customer exits.
    Best way Offsets. you need to decrease the off set by 1. you will get the required output. if you need any further information on how to create please let us.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Date should be displayed on query execution

    hello all
    when v execute a query date should display when query is executed.like if i execute query on 01/06/2006 this date should be displayed and when execute query on 01/02/2006 this date should be displayed?,like that so on?
    kindly anyone let me know how it should be done?
    how this should be done?
    many thanks

    hi Balaji,
    in bex analyzer, you can display the date with menu business explorer -> display text elements -> general, you will see some info, 'author'... 'last refreshed'.
    in web (WAD) you can use web item 'text element' and choose element type 'general text' and
    element id 'SYUZEIT'.
    element id can be used
    general text elements:
    - technical name of the query (REPTNAME)
    - description of the query (REPTXTLG)
    - InfoProvider (INFOCUBE)
    - key date for the query (SRDATE)
    - validity of the data (date and time) (ROLLUPTIME)
    - the person who wrote the query (AUTHOR)
    - the last time the query was changed (date and time) (MODTIME)
    - the last person to make changes to the query (MODUSER)
    - current user (SYUSER)
    - the last time the query was refreshed (date and time) (SYUZEIT)
    hope this helps.
    Message was edited by: A.H.P

  • Customer number is not displayed at Query

    Hi to all,
    I have created a query where i need to display the Receivables aging Report.
    when i check data at Cube level data is coming properly for Every Customer.
    but when i filter customer at Query level data is not displayed at query level.
    Please can any one provide me solution.
    i shall be thnakful to you for this.
    Regards
    Pavneet Rana

    Thanks for Reply,
    For some customer i am getting correct data, and for some customer i am not getting any data at Query level,
    although correct data exist for every customer at CUBE level.
    Regards
    Pavneet Rana

  • Text data is not displaying at Report level for an Infoobject Item name

    Hi All,
    Texts data is maintained at Info object level but text information is not displaying at Report level for an object.  I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information.  This problem occured in QA(Quality) system but not replicated in Production system.  I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
    Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend.  In production it is displaying textal data for the IO.
    Thanks in advance.

    Hi All,
    Thanks for your valuable information.  I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
    In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
    As per my understanding might be the issue with Patches will be checking with Basis team on the same.
    Please suggest if you have any alternatives to fix the issue.

  • Data not getting displayed in query

    Hi
    I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
    data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
    how do i resolve the issue
    Regards

    solved

  • Navigational Attribute data is not display in Cube level and reporting

    Hello ALL
    Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
    What will be the problem?Pl help me out.
    regards
    balaji

    Hi Dinesh
    You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
    Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
    How to run Attribute change run?can u give me steps
    regards
    balaji

  • Date to Month Conversion at Query Level.

    Hi,
    I have Net due date in the Info provider.
    At query level i have to create a restricted keyfigure based on Net Due Month.
    Is there any way i can calculate Net due month at runtime and then create the restricted keyfigure using the net due month instead of using net due date directly(linke 01-10-2010 to 31 -10-2010 for october 2010).
    Thanks and Regards,
    MuraliManohar.

    Hi,
    Is there any way i can calculate Net due month at runtime and then create the restricted keyfigure using the net due month instead of using net due date directly(linke 01-10-2010 to 31 -10-2010 for october 2010).
    you can calculate , but as he said you can add in cube ,  may be for cal month you are taking som eother date field.
    in this case write one customer exist code .
    create one varaibel on netdue date with customer not ready input (if user wants to enter input then ct=reate user entry varaible with reday input by using customer exit).
    in routine wriet the code as when that varaible .
    l_s_range - high , low and give then take the month form that date
    like netdue date +0(6)-- gives month and year
          netdue date +0(2)-- gives month
    then rtestrict that variable with your keyfigure.
    Thanks & Regards,
    sathish

  • Large number of attributes reduces data display in Query (PLS HELP).

    Dear Guru's
    We have newly upgraded our system to 7.0, Currently i have a Query based on master data info object(0 equipment) which contain several attributes, due to huge number of attributes, i cannot see data for few  attributes( Ex:-0service descrip), but data exists for these atrrib, when i check in RSA1. my client want to use heavy number of 0Euipment numbers(nearly 10000) in selection screen. thats the reason for data not to be seen.
    WE are under SP 16 also(Note 562162 - Additional selection of attribute reduces query result set is allready exists), and did not found any proper note.
    So guru's can any one please tell me how i can get the data in Query for these attribute by keeping the same selection option for Equipment numbers (10000).
    Dude's give me some good suggestion please...client is waiting from 1 week
    Thanks in adv
    Dev
    Edited by: Srinivas dev on Jun 10, 2008 11:52 AM

    Dear Yogesh,
    Thanks a lot dude...
    I assigned points for your kindly help....
    Got any idea about by initial post   Large number of attributes reduces data display in Query
    Thanks and Regards
    Dev

  • How to find the date difference in query level?

    Hi All,
      I have to find the difference between Delivery Date and Posting Date in the query level. Canyou please let me know whether it is possible or not?
    Thanks in advance!!
    Regards,
    Ramanathan.R

    Hello,
    If both infoobjects are key figures , then you can do the calculations. Create new formula and do the calculations.
    If infoobjects are characteristics, then also you can perform the calculations but you can do this by creating a formula variable using replacement path.
    Thanks,
    Praveen Tati

  • Data at Query level

    Good Afternoon everyone,
    data is loaded correctly in my infocube thru flat file.but wen i create query on this provider n drill down on one of the object i see different data then cube(field is 'assigned to' which actually store the person's name who the ticket is assigned to but in query it is showing some data which look as some date in single quotes.ex- '20080101').wat can be possible reson for this?
    Regards,
    Deepika

    Hi,
    You are trying to see a assignne name but u are getting a date.
    Thats only possible if the mappings are wrong(identifications) in multicube or u are giving different restrictions at the cube level and at the query level.
    The cube is defenately going to contain the values shown in the report for that infoobject.
    Again go through the restrictions and filters in the query.
    Query will show whatever is in the cube based on the restrictions.
    It will not do the conversions as u have said in your case.
    If it is a multicube check for the identifications again in the multicube for this charactritics.
    It is possible that update rules are correct but the identification in the multicube is incorrect and assignne is mapped to some date.
    Thanks
    Ajeet

  • Display Of Material at the Query Level

    Dear all,
    I have an issue at query level....we have  Material categeorized into
    Material types like   1) Raw Materials, ROH
                                2) Intermediate  and INT
                                3 Finished products ..FIN
    in Raw materials we want to disply only one Material ..but this Material type has many materials but user need to disply only one meterial XXX and in material Type Inetermediate and Finished Product user needs all the materials ..
    i mean i want to display one Material From Raw Materials (ROH) and All materials from Intermediate (INT) and finished products(FIN) ....
    Points will be assigned
    Regadrs
    venu

    As mentioned by me below follow the step by stpe procedure:
    1) Create a new structure in 'ROWS'.
    2) Under the structure create 3 new seletions. (Right Click to see the option)
    3) First Selection :- drag the Material and Material Type to right window. Restrict the Material (single one XXX which u mentioned before) and material type ROH
    4) Second selection : drag the Material Type and restrict it to INT
    5) third Selection:- Drag the Materila type and restrict it to FIN.
    Hope I am clear on the above steps...
    - Amit

  • VO Query returning "No Data to Display" on production server

    Hello,
    I have a simple application that displays data taken from an external oracle database.
    I have 2 pages, one displaying a list of house, the second one displaying the details of a house.
    I get that "master / detail" relationship via the executeWithParams.
    Both my Development machine and production server gets their information from the same database, using the same credentials.
    My problem is that on the production server, the details page returns a "no data to display" in the table I use to show the detailed information. On the development machine it runs just fine. The list master page runs just fine on both environment.
    I'm using jdev 11.1.2.3.0.
    The tables I access are not owned by the user I use in my credentials, but I do have GRANT_SELECT on the said tables.
    I've looked at the logs and I do not see any error as to why no data is returned in production.

    You can try giving the table GRANT ALL TO PUBLIC and verify if the table has a Synonym in the data base.

Maybe you are looking for

  • How do I boot from an external drive?

    I've just Carbon Cloned my 60GB drive to a firewire external drive. I'm about to replace the 60GB with a 160GB drive and the CCC instructions say boot from the external drive I'd just created once the new disk is installed. Then CCC the cloned drive

  • GO URL with Session Variable

    I want to use interaction between two reports in different dashboards, which do not share the same tables but the same values. When clicking on column A values in Report A, I want to create action link with option to open Report B, presenting column

  • How to keyframe from colour to black & white

    I am trying to do a video from present then moved to the past. So I am starting a clip from colour, then slowly it turns into black & white. I have 2 questions: 1) How do I keyframe the above effects ? 2) Instead of using the Sepia effect, is there o

  • Burning AVI files to DVD

    Can someone please recommend a freeware or open source program to burn AVI files to DVD? Thanks in advance for any help!

  • Can one prevent changes to their contact book?

    Hello Community Members, I am posing this question because I am in need of advice. My autistic brother is 22 and was gifted an iPhone 5S from myself and my parents this past Christmas. It has greatly aided in communication skills and growth with fami