'Data for last import/Statistics' tab missing for Distributed imports in EMIGALL

Hi experts,
For some reason when I initiate Distributed loads using 'Distributed imports' in EMIGALL, I do not get the third and fourth tabs viz. 'Data for last import' and 'Statistics for import runs' after the loads are triggered. Is there a specific Note that needs to be applied. I checked Notes like 1179843, 780996 however they were relevant for previous releases and I am currently on release 605. Any insights to this problem?
Thanks,
Caroline.

SharedObjects does the trick nicely!

Similar Messages

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I cannot find all my installed apps on the "use cellular data for" tab on the settings menu.

I have a new iphone 5s and on the first day I've received it, I updated to IOS 8.0.2.
Today, I've decided to turn my cellular data on and, in order to consume less data, I thought I would disable some of the apps. However, only a few were available/visible on the "use cellular data for" tab. However, when, with the cellular data turned on, I opened a missing app on the phone, it would start to appear on the list (where it wasn't previously). Also, when I go to the app on the settings menu, it would not have shown the option, "use cellular data" before I've opened the app and now it does. Do I need to turn on every single app before I can select my cellular data preferences? I know people with the same phone and their apps appear all, as expected.
I don't know if this is a problem of my own carrier but I don't think so, because the people I mentioned earlier have the same carrier.
Any help would be appreciated.
Thank you.

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

Bapi BAPI_REQUISITION_CREATE : how to populate data for sevices tab

Hi all,
I am creating a purchase requisition through bapi .I am using bapi BAPI_REQUISITION_CREATE
For creating purchase requisition. The bapi is creating PR.
I need to add item level services details also through bapi.i am Using structure BAPIESLLC to populate data. But the data is not getting populated in the services tab.
For header data i am populating the following data.
itab_bapiebanc-preq_item      =    '10'.
itab_bapiebanc-doc_type       =    'NB'.
itab_bapiebanc-short_text     =    'Blinding'.
itab_bapiebanc-quantity        =    '1'.
itab_bapiebanc-unit              =    'AU'.
itab_bapiebanc-deliv_date      =    '20081027'.
itab_bapiebanc-plant             =    '1000'.
itab_bapiebanc-pur_group      =    '001'.
itab_bapiebanc-preq_name    =    'tracking no'.
itab_bapiebanc-trackingno     =    '2/C/1B'.
itab_bapiebanc-mat_grp        =    '007'.
itab_bapiebanc-acctasscat    =    'P'.
itab_bapiebanc-ITEM_CAT      =    '9'.
itab_bapiebanc-GR_IND          =    'X'.
itab_bapiebanc-IR_IND            =    'X'.
itab_bapiebanc-FIXED_VEND    =    ' '.
APPEND itab_bapiebanc.
itab_bapiebkn-wbs_elem        =    'E-2004'.
itab_bapiebkn-g_l_acct = '0000417000'.
APPEND itab_bapiebkn.
itab_bapiebantx-PREQ_ITEM = '10'.
APPEND itab_bapiebantx.
when i am adding the above data the p,r is creating sucessfully in the system.
I need to add data in the item level services tab also.
I am populating for services tab .
*----- this part is not working
itab_bapiservices-SERVICE = '100217'.
itab_bapiservices-PCKG_NO = '0000000001'.
itab_bapiservices-LINE_NO = '0000000001'.
itab_bapiservices-EXT_LINE = '0000000010'.
itab_bapiservices-short_text = 'BREAKFAST CNTR TOP; AS PER SPECS'.
itab_bapiservices-QUANTITY = '680'.
itab_bapiservices-BASE_UOM = 'M2'.
itab_bapiservices-GR_PRICE = '23.00'.
itab_bapiservices-MATL_GROUP = '007'.
itab_bapiservices-PRICE_UNIT = '1'.
append itab_bapiservices.
I am populating data for service tab like given above.But the value is not get updaing in purchase requisation.
Please let me know how to populate the data for service tab.
with regards,
ambrose
itab_bapiebantx-text_line      =    'Test for Purchase requisiton'.
APPEND itab_bapiebantx.

Hello
Try this:
    CALL FUNCTION 'NUMBER_GET_NEXT'
         EXPORTING
           nr_range_nr                   = '01'
           object                        = 'SERVICE'
         IMPORTING
           NUMBER                        = pacno
         EXCEPTIONS
           INTERVAL_NOT_FOUND            = 1
           OTHERS                        = 8.
itab_bapiservices-PCKG_NO = pacno + 1.
Also Note 499626 - FAQ: BAPIs in the service

Storing the last modified date for files in a HashMap

This method gets a list of all the .java files in the source subdirectory, gets the last modified date for them and stores the file name and last modified date in a HashMap.
import java.util.HashMap;
import java.io.FilenameFilter;
import java.io.File;
import java.util.ArrayList;
public class myClass
     public static void main(String[] args)
          HashMap result = getLastModified();
     static FilenameFilter javaFilter = new FilenameFilter()
        public boolean accept(File dir, String name)
            return name.endsWith(".java");
     public HashMap getLastModified()
          HashMap lastModified = new HashMap();
          ArrayList javaFiles = new ArrayList();
          File sourceDir = new File(".\\Source");
          File currentFile;
          long lLastModified;
          //get a list of all the .java files in the source directory
          javaFiles=listFiles(javaFilter);
          //for all .java files get and store the last modified date
          for(int i=0; i<javaFiles.size(); i++)
               currentFile=(File)javaFiles.get(i);
               lLastModified=currentFile.lastModified();
               lastModified.put(currentFile, lLastModified);
          return lastModified;
}The problems I am getting are:
>
The method listFiles(FilenameFilter) is undefined for the type myClass
and
>
The method put(Object, Object) in the type HashMap is not applicable for the arguments (File, long)
can anyone help? What's the best way to go aobut this?

Thanks for the replies abenstex I modified it so that javaFiles is now a File[] and made the change you suggested but I still have the second problem, here's the code so far:
import java.util.HashMap;
import java.io.FilenameFilter;
import java.io.File;
import java.util.ArrayList;
public class myClass
     public static void main(String[] args)
          HashMap result = getLastModified();
     static FilenameFilter javaFilter = new FilenameFilter()
        public boolean accept(File dir, String name)
            return name.endsWith(".java");
     public HashMap getLastModified()
          HashMap lastModified = new HashMap();
          File[] javaFiles = {};
          File sourceDir = new File(".\\Source");
          File currentFile;
          long lLastModified;
          //get a list of all the .java files in the source directory
          javaFiles=sourceDir.listFiles(javaFilter);
          //for all .java files get and store the last modified date
          for(int i=0; i<javaFiles.length; i++)
               currentFile=(File)javaFiles;
               lLastModified=currentFile.lastModified();
               lastModified.put(currentFile, lLastModified);
          return lastModified;

Itunes artwork tab missing for movies in version 11.1.3.8

For some reason recently I am noticing the artwork tab missing when I import in a movie into my itunes directory. This just started happening and the movie formats are exactly the same as ones which have the artwork tab available. These are all MPEG-4 Video Files at 124 kbps. Typical iTunes 'anomoly' but on this one I am baffled. Anyone have a clue as to how to fix this? I even tried completely removing the movie from the itunes file directory and then reimporting into iTunes but same issue.

No need to scream at me.
You can access the apps by clicking the iPad thingy on top right of the screen (when the iPad is connected) and then select Apps and scroll down to file sharing apps...
Or....
As I said....
EXACT SAME WAY AS BEFORE

Dates for import are all wrong

Hiya - I have been trying to import clips made last week. The date is correct but the year is 2009. They will put themselves into a 2009 event folder with other projects in. I have tried to create a 2010 event folder and drag the project into it but it just doesn't want to do it.
Any ideas as to why iMovie does not see the clips as 2010 and how I can make them appear in a 2010 project??

iMovie tries to recognize when the camera recorded the video, not when it was imported. You may wish to check the camera's settings to see if they are up-to-date. Here's some background, and a way to adjust the clip's date (don't do it with a project that you've already edited without taking precautions).
http://imovie08.blogspot.com/2007/09/how-to-change-date-for-dv-event-footage.htm l
Adjusting the date:
http://imovie.maccreate.com/2009/12/01/adjust-date-and-time-of-clips-in-imovie-0 9/
John

Importance of Sales Area Data for BP

Please give me the various reasons for having or maintaining Sales Area for a Business Partner:
_Explanation:_ What is the importance of maintaining Sales Area Data for BP.Please list out several points.
As we know Sales Area is composed of : Sales Organisation, Distribution channel, & Division.
Thanks & Regards,

These are off the top of my head. I can reply a bit later to add some more.
1) The pricing procedure (entered in the Billing Tab) which affects the LEAD, OPPT, AG, QCTR, and TA documents. Without the pricing of the product, the transactions cannot be executed and the total product value cannot be determined. Without a total dollar value, a TA doesn't make sense.
2) The S.O defines the legal terms for the product and if the BP wants to return the product they ordered, they have that information.
BB

Import a Date for Sorting

I had a large database of my songs on MS Access which included the following info for each song: Title(Name), Artist and Date. The Date was the mm/dd/yy which the song first entered the Top 40 according to Billboard (from one of their reference books).
I have imported all my music into iTunes and while I am satisfied with the automatic entry of Name & Artist during the rip, I would like to find a way to copy or enter the Top 40 Date for each song. I'd like to create playlists sorted by the Top 40 Date.
Is it possible to add this info - hopefully in a scripted way?
The only solution I can see is to enter a date in "yyyy-mm-dd" format into an unoccupied field such as "Sort Show" which is found under the SORTING Tab when you do a "Get Info" (ctrl-I) on a song. This requires entering the date for each song manually which in my case is prohibitive since I have over 2000 songs.
Are there any scripts, apps or suggestions that simplify the process? Any easy way to import the data?

Hi,
1) getting date from Excel:
What format does the date have?
Are you able to convert the value to the Date Type ?
2) putting into the SBO form:
Are you filling it into the DataSource, or just typing it as a String into the EditText?
These are the basic questions, you have to ask yourself.
1)
For example: there is a difference when accessing the Excell Cells(x,y).Value and the Cells(x,y).Text
.Value is usually in Date_Variable format, but the Text is formated to for example MM-DD-YYYY format.
Perhaps you're not able to convert the MM-DD-YYYY into the date variable, thus you will have to change the "MM-DD-YYYY" into the "DD.MM.YYYY" format so you can put it somewhere.
2)
Same problem is with the insertion of date into the SBO, when filling the EditText.String, you will have to convert it into the date, according to the SBO settings ... for example: "MM.DD.YYYY"
There is also the SBObob object, which has the "Format_StringToDate" method, which will convert the string, into the format for DataSource...
Regards,
Jaro

How to fetch last changed date for Header in me22n?

Hi Experts,
I need to create a report for PO, where I have created one screen tab in Header level(customer data), therefore I need to fetch last changed date for header , I must mention that I do not want last changed date for item level, only for header last changed date is required.
Kindly assist me on this.
Thanx
Shireen

Read table CDHDR (object "EINKBELEG") and CDPOS (look for table name EKKO), keep the last CDHDR record with "EKKO" data actually changed.
Regards,
Raymond

"Last import": no replacement for this?

A friend emailed 15 photos that I exported to Photos. Problem: I can't find the photos, because they're probably scattered by date among my 20K+ photos. With iPhoto, I'd simply choose "Last Import" and then file then photos to albums, etc. Now I can't even FIND them, much less add them to a slide show for presentation this week.
As with many users, I'm shaking my head and saying, "Seriously? Apple didn't think about this enough to present an obviously solution?"

halpa wrote:
Several points of learning from this discussion - have appreciated everyone's input:
problem: Apple changed to Photos from iPhoto, but Mail's options for handling attached photos are still "save" and "export to iPhoto" (inconsistency)
if you do "export to iPhoto," it doesn't show up as Import (or in Last Import" in Photos)
I had to "Save" the email-attached photos to a separate folder on my Mac, then import them into Photos (then they show up on Last Import too)
very helpful: with the sidebar open in Photos, I realized you can scroll down to Albums and find under that a folder called "iPhoto Events" that helps keep you sane after migrating from iPhotos
Are you using the native Mail.app? Then you should be able to "export to Photos". I am seeing three export options in Mail, when I ctrl-click an attached photo:
Did you enable your current Photos library as the System Photos Library? Check the Preferences > General in Photos, while you are browsing your library. If "Use as System Photos Library" is grayed out, your settings are correct. Then try, if quitting Photos and restarting the Mac will help.
"if you do "export to iPhoto," it doesn't show up as Import (or in Last Import" in Photos)" -that is right, because you are saving to your iPhoto Library and not the Photos library. You should be seeing the saved photos, when you launch iPhoto.
"very helpful: with the sidebar open in Photos, ... " I keep the sidebar open at all times. That makes it easy to drag and drop to albums and projects.

TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

IPhoto didn't create a new event for my last import

I imported some pics from my DSLR via an SD card just now. The photos are visible if I select "Last Import", but not otherwise. iPhoto has always defaulted to creating a new event each time I import (one for each date on the imported photos). I haven't changed any settings whatsoever, but I can't see these photos anywhere except "Last Import".
Any clue why?? And how to fix it?
Tks!
Butch

If the Photos are under 'Last Import' or 'Last N Months' then they are in the Library somewhere, just not where you are expecting them to be. We know this as both Last Import and 'Last N Months' are not places, just listings of elements in the the Library.
The two most common reasons that they can't be found is either an incorrect date on the camera or the Sorting (View Menu -> Sort Photos - or Sort Events, as appropriate) has changed.
Quick route to find them: Right-click on one of the images in Last Import and select 'Show Event'. This will bring you to the image in the Library.

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7) The window don't open or they are there and only in an outline, kind of like they're behind the screen. I have also done a system update and then a syst

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.

After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.

'Data for last import/Statistics' tab missing for Distributed imports in EMIGALL

Similar Messages

Maybe you are looking for